Engineering Commons^™

Modeling Of Scrap Dissolution In Molten Iron For The Case Of Heat Transfer-Controlled Process By Different Approaches And Comparison Of Their Accuracies, Ajay Kumar Shukla, Brahma Deo, D. G.C. Robertson

Materials Science and Engineering Faculty Research & Creative Works

Dissolution of steel scrap in molten iron is studied by using analytical as well as numerical approaches for the case of a heat transfer-controlled process. The approaches used are Green's function approach, quasi-static approach, integral profile method (IPM) (with parabolic profile), and finite difference methods (FDM). Application of FDM explicit and FDM implicit with fixed grid and variable grid is described. Accuracy of all the approaches is compared in terms of total dissolution time evaluated from overall heat balance criterion. The selection rule of time step and deciding the suitable approach for achieving minimum error for different operating conditions, represented …

Aging Response On The Stress Corrosion Cracking Behavior Of Wrought Precipitation-Hardened Magnesium Alloy, G. R. Argade, S. K. Panigrahi, R. S. Mishra

Materials Science and Engineering Faculty Research & Creative Works

Constant immersion testing and slow strain rate testing (SSRT) are conducted on wrought magnesium alloy in a 3.5 wt.% NaCl solution. After solution annealing (SA) at 525 °C for 8 h, the alloy was isothermally aged at 210 °C for 15 h, 48 h, and 144 h to obtain underaged (UA), peak-aged (PA), and overaged (OA) microstructures, respectively. After 32 days of constant exposure in chloride solution, the SA and UA samples showed the lowest (~ 0.10 mg cm−2 day−1) and the highest (~ 0.20 mg cm−2 day−1) weight loss, respectively. SSRT was carried out at an initial strain rate …

Characterization Of Contact Resistance Properties Of Different Tlm Structure Designs, Nicole A. Karam Pannaci

Digital Repository: Showcase of Undergraduate Research Excellence

No abstract provided.

Performance Enhancement And Prediction Of Composite Materials With Embedded Electrospun Piezoelectric Sensors, Rahman Jani Mazed, Muthu Ram Prabhu Elenchezhian, Vamsee Vadlamudi, Md Riaz Uddin Ahmed, Rassel Raihan, Kenneth Reifsnider

Institute of Predictive Performance Methodologies (IPPM-UTARI)-Archive

In today’s world, continuous fiber reinforced composite materials are extensively used in the aerospace, automotive and other structural industries. Since the applications of such fibers demand for a high safety rating, it is of utmost importance for engineers who design such materials to analyze its safety. When cracks are developed in such materials, the mechanical, electrical, and thermal properties also get altered as a function of the cracks. Previous studies have shown that changes in electrical properties can be directly correlated with the development of cracks in the material which can then be used to predict the remaining life of …

Fabrication, Characterization And Applications Of Highly Conductive Wet-Spun Pedot:Pss Fibers, Ruben Sarabia Riquelme

Theses and Dissertations--Chemical and Materials Engineering

Smart electronic textiles cross conventional uses to include functionalities such as light emission, health monitoring, climate control, sensing, storage and conversion of energy, etc. New fibers and yarns that are electrically conductive and mechanically robust are needed as fundamental building blocks for these next generation textiles.

Conjugated polymers are promising candidates in the field of electronic textiles because they are made of earth-abundant, inexpensive elements, have good mechanical properties and flexibility, and can be processed using low-cost large-scale solution processing methods. Currently, the main method to fabricate electrically conductive fibers or yarns from conjugated polymers is the deposition of the …

Ab Initio Investigation On The Surface Chemistry Of Functionalized Titania Membranes, Evan Hyde

Theses and Dissertations--Chemical and Materials Engineering

Titania (titanium dioxide) is a metal oxide which has recently been investigated as a photocatalyst, most commonly for use in hydrolysis, which absorbs mostly in the UV range. However, the range of absorption can be shifted to fall within the visible light range either by doping or by functionalizing the surface with atomic or molecular adsorbates. Over the course of this research, a series of Density Functional Theory (DFT) calculations are performed to ascertain the effects of these different methods on the photocatalytic performance of titania. While the effects of nitrogen doping and oxygen vacancies are well known, more recent …

Electrophoresis In Heterogeneous Hydrogels And Applications In Surface Patterning, Ning Ge

Theses and Dissertations--Mechanical and Aerospace Engineering

The creation of chemical micropatterns on surfaces makes it possible to add unique chemical functionality to surfaces, modifying properties such as wettability, or even adding the ability to selectively bind other molecules. The creation of biochemical surface patterning in particular is useful in a variety of fields including tissue engineering and highthroughput drug screening. There are many existing surface patterning techniques which focus on precise control over the patterned geometry, even down to submicron scale features, but they do not allow local control over chemical concentration. So the results are high resolution patterns with binary concentration. There are also existing …

Stress Generation In Ni50.3Ti29.7Hf20 Shape Memory Alloys, Utsav Shah

Theses and Dissertations--Mechanical and Aerospace Engineering

Shape memory alloys such as NiTiHf and NiTi have the ability to generate large recovery stresses when they are constrained after pre-straining and then heated above their Austenite Finish Temperature (A_f). In this work Ni_49.9Ti_50.1 (at.%), the most well-known SMA with impressive shape memory properties but limited temperature range and Ni_50.3Ti_29.7Hf₂₀, a promising high temperature shape memory alloy, were characterized to reveal their stress generation capabilities. The effects of pre-straining on stress generation were investigated via martensite reorientation method of NiTi and NiTiHf alloys by loading the samples till …

Capillary Flow Of Liquid Aluminum Alloy In Wetting And Wetting/Non-Wetting Systems, Yangyang Wu

Theses and Dissertations--Mechanical and Aerospace Engineering

In this dissertation, the capillary flow of liquid aluminum alloy in both wetting and wetting/non-wetting systems is investigated.

The impact of gravity and surface topography on the capillary flow has been studied in a wetting/non-wetting assembly (an AA3003/Al₂O₃ wedge-tee configuration). The research includes (i) kinetics of liquid Al-Si-K_xAl_yF_z alloy triple line movements and dynamic macro advancing and receding contact angles and (ii) free surface profiles of the molten alloy driven by surface tension and impacted by gravity. A trade-off between the surface tension and gravity force has been found by calculating the …

Carbon Oxidation At The Atomic Level: A Computational Study On Oxidative Graphene Etching And Pitting Of Graphitic Carbon Surfaces, Simon Schmitt

Theses and Dissertations--Mechanical and Aerospace Engineering

In order to understand the oxidation of solid carbon materials by oxygen-containing gases, carbon oxidation has to be studied on the atomic level where the surface reactions occur. Graphene and graphite are etched by oxygen to form characteristic pits that are scattered across the material surface, and pitting in turn leads to microstructural changes that determine the macroscopic oxidation behavior. While this is a well-documented phenomenon, it is heretofore poorly understood due to the notorious difficulty of experiments and a lack of comprehensive computational studies. The main objective of the present work is the development of a computational framework from …

Organophosphorus-Hydrazides As Potential Reactive Flame Retardants For Epoxy, Alexander B. Morgan, Vladimir Benin, Donald A. Klosterman, Abdulhamid Bin Sulayman, Mustafa Mukhtar, Mary L. Galaska

Chemical and Materials Engineering Faculty Publications

For structural composites used in vehicles and aircraft, flame retardant chemistries which enhance char formation and reduce heat release are preferred. Phosphorus-based and phosphorus–nitrogen flame retardants for epoxies have been well studied to date, but phosphorus hydrazides have not been studied for their flame-retardant potential in epoxy. These hydrazides offer some novel structures and they can potentially offer a combination of vapor and condensed phase flame retardant action. A series of eight compounds were systematically investigated in this study as reactive flame retardants in a bisphenol F epoxy/aliphatic amine resin system at a level of 2.5 wt% phosphorus. Results suggest …

Additive Manufacturing Of Engineered Material Systems For Energy Applications, Luis Angel Chavez

Open Access Theses & Dissertations

Despite increasing efforts to use renewable electricity generation techniques in the last couple of decades, the world is still heavily reliant on traditional power generation techniques. This creates the need to make such systems cheaper and less pollutant through improvements to their efficiency. Increasing the efficiency and reliability of energy conversion systems, specially those based on combustion processes has been of interest for many years. However, material limitations have brought these systems to a stagnant condition.

A novel approach to help increase the efficiency of such systems is to closely monitor their operating conditions and therefore be able to increase …

Investigation On The Mechanical Properties And Microstructure Analysis Of Micro-Resistance Spot Welding Between Stainless Steel 316l And Tl-6al-4v, Mohd Mansor Muhammad Safwan

Student Works (2020-2029)

In this study, ASS 316L and Ti-6Al-4V were welded together by micro-resistance spot welding (μRSW) at different combinations of welding parameters using specifically design electrode geometry in order to acquire the optimal combination of welding parameters. The welded joint were subjected to tensile shear strength test to determine the influence of welding current, welding time, welding force and different design of elctrode tip on the mechanical properties and the strength of the welded joint. The experiment was conducted by using full factorial design of experiment (DoE) with L27 orthogonal array and utilizing the analysis of variance (ANOVA) to obtain the …

Non-Linear Inverse Liquid-Solid Chromatography As A Methodology To Characterize Drug Concentration Losses To Polymeric Materials Used In Body-On-A-Chip Devices For Drug Discovery, Mark Schnepper

Electronic Theses and Dissertations, 2020-2023

Body-on-a-chip and human-on-a-chip systems are currently being used to augment and could eventually replace animal models in drug discovery and basic biological research. However, hydrophobic molecules, especially therapeutic compounds, tend to adsorb to the polymer materials used to create these microfluidic platforms, which may distort the dose-response curves that feed into Pharmacokinetic/Pharmacodynamic (PK/PD) models which translate preclinical data into predictions of clinical outcomes. Adsorption of hydrophobic molecules to these polymer materials needs better characterization. Inverse Liquid-Solid Chromatography paired with a numerical optimization based on the Langmuir model of adsorption was used to characterize the adsorption isotherm parameters of selected drugs …

Development Of Facile Microfabrication Technologies For The Fabrication And Characterization Of Multimodal Impedimetric, Plasmonic, And Electrophysiological Biosensors, Cacie Hart

Electronic Theses and Dissertations, 2020-2023

The objective of this dissertation was to develop novel methods of patterning inorganic and organic materials, develop biocompatibility evaluations, and subsequently apply these methods toward developing biosensors and lab-on-a-chip devices, such as Interdigitated Electrodes (IDEs) and Microelectrode Arrays (MEAs) on non-traditional (such as nanostructured and plasmonic) polymer substrates or deploy these methods to enhance precision cellular placement on traditional (glass) MEA substrates. It was hypothesized that a combination of such facile microfabrication techniques and patterning technologies on traditional and non-traditional substrates would increase the sensitivity and selectivity of such sensor platforms by several orders of magnitude, and potentially introduce new …

Diffusion Of Fission Products In Nuclear Graphite, Kevin Graydon

Electronic Theses and Dissertations, 2020-2023

The next generation of nuclear reactors (Generation IV) are specified to use graphite as the choice material for neutron moderation and structural components. For this reason, study of diffusion behavior of the fission product, ruthenium (Ru), in the candidate graphite grades, POCO AXF-5Q & ZXF-5Q, IG-110, NBG-18 and PCEA, is necessary. Diffusion data for Ru in these grades is absent due to the lack of prior studies and this work aims to fill this void and begin the study of this metallic fission product's diffusion behavior. By utilizing physical vapor deposition (PVD), dynamic secondary ion mass spectroscopy (SIMS), and the …

Understanding Solidification Behavior Of Selected Aluminum And Magnesium Alloys Additively Manufactured By Laser Powder Bed Fusion, Holden Hyer

Electronic Theses and Dissertations, 2020-2023

Additive manufacturing (AM), also known as 3D printing, has demonstrated the ability to produce customized, complex engineering components from metallic alloys, not previously possible with traditional techniques such as subtractive machining of cast alloys. However, many desired lightweight metallic alloys such as high strength aluminum (Al) and magnesium (Mg) alloys, cannot be processed dense with AM due to the consequence of solidification cracking. Thus, a large knowledge gap remains in assessing already existing, and genesis of new alloys that can be processed dense by AM, without solidification cracking. The present work investigates the AM processing and solidification behavior of selected …

Buckling Load Study On Pop Nut (Rivet) Using Finite Element Analysis, Saurabh Shankar Shegokar

Dissertations, Master's Theses and Master's Reports

This study highlights the material behavior in riveting operation that includes buckling load analysis using ABAQUS. Finite Element Analysis is used to find the buckling load vs. Displacement results and validated with the results obtained in physical testing of rivet (POP Nut). A mesh sensitivity study is performed using ABAQUS to understand the optimum mesh size for this analysis. An axisymmetric model with contact properties is created and simulated to reduce the simulation time using ABAQUS. The results obtained through Finite Element Analysis show a good resemblance with the testing results. Design changes were suggested to achieve better results that …

Artificial Synthetic Scaffolds For Tissue Engineering Application Emphasizing The Role Of Biophysical Cues, Samerender Nagam Hanumantharao

Dissertations, Master's Theses and Master's Reports

The mechanotransduction of cells is the intrinsic ability of cells to convert the mechanical signals provided by the surrounding matrix and other cells into biochemical signals that affect several distinct processes such as tumorigenesis, wound healing, and organ formation. The use of biomaterials as an artificial scaffold for cell attachment, differentiation and proliferation provides a tool to modulate and understand the mechanotransduction pathways, develop better in vitro models and clinical remedies. The effect of topographical cues and stiffness was investigated in fibroblasts using polycaprolactone (PCL)- Polyaniline (PANI) based scaffolds that were fabricated using a self-assembly method and electrospinning. Through this …

Influence Of Rapid Solidification And Wrought Processing On Precipitation Strengthening And Deformation Mechanisms In Al-Sc-Zr Alloys, Yang Yang

Dissertations, Master's Theses and Master's Reports

Al-Sc-Zr alloys have drawn increasing attention in the last several decades due to their strengthening and coarsening resistance. In this study, solute concentrations of Sc and Zr were increased beyond their equilibrium solubilities without primary precipitate formation using melt-spinning. The melt-spun ribbon was metallurgically bonded into bulk shape using extrusion. With the proper aging treatment, the mechanical properties of the supersaturated melt-spun ribbon and extruded rod were found to be significantly higher than a baseline dilute alloy. Increased mechanical properties include microhardness, tensile strength at ambient-temperature, and compressive strength and threshold stress at and elevated-temperature. These increases were related to …

The Study Of Chemical Induced Polyolefin-Based Ion Exchange Membrane For Electrodialysis Application, Di Huang

Dissertations, Master's Theses and Master's Reports

High-performance ion exchange membranes with high ion exchange capacity (IEC), excellent mechanical properties, lower membrane resistance and superior ions conductivity were developed with chemical-induced polymerization in this work. Through a series of synthesizing experiments, structure characterization and properties testing for polyolefin-based cation exchange membrane (CEM) and anion exchange membrane (AEM), LDPE proved to be an optimized backbone material. The CEM with 57.5% styrene, 38.4% LDPE, 3% crosslinking degree and 1% initiator addition yield the highest IEC value (1.72 mol/g) and moderate burst strength. The 10% addition of styrene was found to enhance IEC of 57% to AEM. However, continually increase …

The Effects Of Carbon Equivalent, Return Ratios, Mold Preparation, Riser Feed And Casting Temperature On The Microstructural And Mechanical Properties Of 100-70-03 Pearlitic Ductile Iron, Erin Vandusen

Dissertations, Master's Theses and Master's Reports

The most common and costly detriments to ductile iron foundries are casting defects, particularly in new and complex components. The ability to understand the factors and processes that create microstructures and the associated properties would allow accurate virtual predictions of casting outcomes. An experimental study of standard foundry variables, carbon equivalent, return ratio, mold preparation, riser feed, and casting temperature on a target of 100-70-03 pearlitic, hypereutectic ductile iron provided the groundwork for an ICME database. Density decreased when the fraction of graphite nodules was greater due to the low density of graphite. A greater percentage of return scrap and …

Gravity-Drawing Flexible Silicone Filaments As Fiber Optics And Model Foldamers, Katherine Snell

CMC Senior Theses

Here, we present a method of gravity-drawing polydimethylsiloxane (PDMS) silicone fibers with application as fiber optics and as model foldamers. Beginning as a viscous liquid, PDMS is cured using heat until its measured viscosity reaches 4000 mPa•s. The semi-cured elastomer is then extruded through a tube furnace to produce thin (diameters on the order of hundred micrometers) filaments with scalable lengths. PDMS is biocompatible, gas-permeable, flexible, and hydrophobic. Additionally, the PDMS surface hydrophobicity can be modified via UV exposure, O2 plasma, and corona discharge. We demonstrate the patternibility (i.e patterns of hydrophobicity) of PDMS fibers, adding complexity to potential foldamer …

Gold/Qds-Embedded-Ceria Nanoparticles: Optical Fluorescence Enhancement As A Quenching Sensor, Nader Shehata, Effat Samir, Ishac Kandas

Electrical & Computer Engineering Faculty Publications

This work focuses on improving the fluorescence intensity of cerium oxide (ceria) nanoparticles (NPs) through added plasmonic nanostructures. Ceria nanoparticles are fluorescent nanostructures which can emit visible fluorescence emissions under violet excitation. Here, we investigated different added plasmonic nanostructures, such as gold nanoparticles (Au NPs) and Cadmium sulfide/selenide quantum dots (CdS/CdSe QDs), to check the enhancement of fluorescence intensity emissions caused by ceria NPs. Different plasmonic resonances of both aforementioned nanostructures have been selected to develop optical coupling with both fluorescence excitation and emission wavelengths of ceria. In addition, different additions whether in-situ or post-synthesis have been investigated. We found …

Thermoelectric Porous Mof Based Hybrid Materials, Engelbert Redel, Helmut Baumgart

Electrical & Computer Engineering Faculty Publications

Porous hybrid materials and MOF (Metal-Organic-Framework) films represent modern designer materials that exhibit many requirements of a near ideal and tunable future thermoelectric (TE) material. In contrast to traditional semiconducting bulk TE materials, porous hybrid MOF templates can be used to overcome some of the constraints of physics in bulk TE materials. These porous hybrid systems are amenable for simulation and modeling to design novel optimized electron-crystal phonon-glass materials with potentially very high ZT (figure of merit) numbers. Porous MOF and hybrid materials possess an ultra-low thermal conductivity, which can be further modulated by phonon engineering within their complex porous …

Observation Of Reduced Thermal Conductivity In A Metal-Organic Framework Due To The Presence Of Adsorbates, Hasan Babaei, Mallory E. Decoster, Minyoung Jeong, Zeinab M. Hassan, Timur Islamoglu, Helmut Baumgart, Alan J.H. Mcgaughey, Engelbert Redel, Omar K. Farha, Patrick E. Hopkins, Jonathan A. Malen, Christopher E. Wilmer

Electrical & Computer Engineering Faculty Publications

Whether the presence of adsorbates increases or decreases thermal conductivity in metal-organic frameworks (MOFs) has been an open question. Here we report observations of thermal transport in the metal-organic framework HKUST-1 in the presence of various liquid adsorbates: water, methanol, and ethanol. Experimental thermoreflectance measurements were performed on single crystals and thin films, and theoretical predictions were made using molecular dynamics simulations. We find that the thermal conductivity of HKUST-1 decreases by 40 – 80% depending on the adsorbate, a result that cannot be explained by effective medium approximations. Our findings demonstrate that adsorbates introduce additional phonon scattering in HKUST-1, …

Effect Of Layer Thickness On Structural, Morphological And Superconducting Properties Of Nb3Sn Films Fabricated By Multilayer Sequential Sputtering, M. N. Sayeed, U. Pudasaini, C. E. Reece, G. V. Eremeev, H. E. Elsayed-Ali

Electrical & Computer Engineering Faculty Publications

Superconducting Nb₃Sn films can be synthesized by controlling the atomic concentration of Sn. Multilayer sequential sputtering of Nb and Sn thin films followed by high temperature annealing is considered as a method to fabricate Nb₃Sn films, where the Sn composition of the deposited films can be controlled by the thickness of alternating Nb and Sn layers. We report on the structural, morphological and superconducting properties of Nb₃Sn films fabricated by multilayer sequential sputtering of Nb and Sn films on sapphire substrates followed by annealing at 950 °C for 3 h. We have investigated the …

Utility-Scale Solar Pv Performance Enhancements Through System-Level Modifications, Andrew D. S. Glick, Naseem Ali, Juliaan Bossuyt, Marc Calaf, Raul Bayoan Cal

Mechanical and Materials Engineering Faculty Publications and Presentations

Performance of solar PV diminishes with the increase in temperature of the solar modules. Therefore, to further facilitate the reduction in cost of photovoltaic energy, new approaches to limit module temperature increase in natural ambient conditions should be explored. Thus far only approaches based at the individual panel level have been investigated, while the more complex, systems approach remains unexplored. Here, we perform the first wind tunnel scaled solar farm experiments to investigate the potential for temperature reduction through system-level flow enhancement. The percentage of solar irradiance converted into electric power depends upon module efficiency, typically less than 20%. The …

Doping With Rare Earth Elements And Resultant Nano-Inclusions On The Electrical And Thermal Properties Of The Mis-Fit Layered Thermoelectric Oxide, Geoffroy Gauneau

Graduate Theses, Dissertations, and Problem Reports (ETD)

Thermoelectric generators produce electricity by directly converting temperature differences into electrical energy through Seebeck effect. Thermoelectric generators possess many unique features, such as having no moving part and being very reliable with a relatively long lifespan once built. They are solid-state waste heat harvesters. With various waste heat available throughout many industries, thermoelectric generators could offer economically competitive renewable energy. The current state of the art thermoelectric materials includes materials with relatively toxic elements and must work under vacuum, making them quite expensive to produce. Among the various thermoelectric materials, ceramic oxides have been proved to be more chemically stable …

Magnetism In Γ-Fesi2 Nanostructures: A First Principles Study, Sahil Dhoka

Dissertations, Master's Theses and Master's Reports

First-principles calculations are performed on γ-FeSi₂ nanostructures grown on Si (111) and (001) substrate. An attempt to explain the origin of emergent magnetic properties of the metastable gamma phase of iron di-silicide (γ-FeSi₂) is made, which show ferromagnetic behavior on nanoscale, unlike its possible bulk form. Many papers try to explain this magnetism from factors like bulk, epitaxial strain, interface, surface, edges, and corners but doesn’t provide an analytical study for these explanations. Density functional theory is used to analyze the magnetic effects of these factors. The results for the epitaxial structures show no magnetic behavior for …