Engineering Commons^™

Predicting Effective Fracture Toughness Of Zrb₂-Based Ultra-High Temperature Ceramics By Phase-Field Modeling, Arezoo Emdadi, Jeremy Lee Watts, William Fahrenholtz, Greg Hilmas, Mohsen Asle Zaeem

Materials Science and Engineering Faculty Research & Creative Works

The effective fracture toughness (EFT) of ZrB₂-C ceramics with different engineered microarchitectures was numerically evaluated by phase-field modeling. To verify the model, fibrous monoliths (elongated hexagonal ZrB₂-rich cells in a continuous C-rich matrix) with different volume fractions of a C-rich phase were considered. Architectures containing 10 and 30 vol% of C-rich phase showed EFT values about 42% more than that of pure ZrB₂. Increasing the C-rich phase to 50 vol%, dropped toughness significantly, which is in agreement with the experimental results. Replacing hexagonal cells with cylindrical, triangular, or square cells of the same cross-sectional …

Synthesis And Application Of Ceramic Paste For High-Temperature Electronic Packaging, Ardalan Nasiri

Graduate Theses and Dissertations

This dissertation research focused on the synthesis and application of ceramic paste for high-temperature applications. An alumina paste material comprising aluminum dihydric phosphate and alumina powder was developed for high-temperature electronic packaging. Nano aluminum nitride and nano-silica powders were embedded to promote the paste curing process, limit the grain growth, and increase its bond shear strength. The chip-to-substrate bond strength was enhanced and met the MIL-STD requirements for die-attach assembly. Its encapsulation property was improved with fewer cracks compared to similar commercial ceramic encapsulants. The die-attach material and encapsulation properties tested at 500°C showed no defect or additional cracks. Thermal …

Piezoresistive Hybrid Nanocomposites For Strain And Damage Sensing: Experimental And Numerical Analysis, Audrey Jean-Miche Gbaguidi

Doctoral Dissertations and Master's Theses

Carbon nanomaterials such as carbon nanotubes (CNTs) and graphite nanoplatelets (GNPs) demonstrate remarkable electrical and mechanical properties, which suggest promising structural and functional applications as fillers for polymer nanocomposites.

The piezoresistive behavior of these nanocomposites makes them ideal for sensing applications. Besides, hybrid nanocomposites with multiple fillers like carbon nanotubes (CNTs) and graphite nanoplatelets (GNPs) are known to exhibit improved electrical and mechanical performance when compared to mono-filler composites.

To comprehensively understand the mechanisms of electrical percolation, conductivity, and piezoresistivity in hybrid nanocomposites, the author develops a two-dimensional (2D) and a three-dimensional (3D) computational Monte Carlo percolation network models for …

Microstructural Characteristics And Mechanical Properties Of Sn-Ag-Cu Solders With Minor Additions Of Al And Zn, Yee Mei Leong

Student Works (2020-2029)

Driven by the recent trend towards miniaturization of lead free electronic products, researchers are putting immense efforts to improve the properties and reliability of Sn based solders. Recently, much interest has been shown on low silver (Ag) content solder SAC 105 (Sn-1.0Ag-0.5Cu) solder because of economic reasons and improvement of impact resistance as compared to SAC387(Sn-3.8Ag-0.7Ag). The present work investigates the effect of minor (0.1-0.5wt.%) Aluminium (Al) and Zinc (Zn) addition to SAC105 on the bulk and interfacial structure between solder and copper substrate during reflow and after thermal aging , the mechanical properties of the solder joint and the …

Prediction Of Isotropic Strain Hardening Material Properties Using Gradient Boosted Regression Tree Method And Hyperparameter Optimization, Darren R. Promer

Masters Theses

In this study a new technique is proposed for the determination of elastic-plastic stress-strain relations for isotropic materials using the force-displacement output from an instrumented indentation test, finite element simulation, and machine learning methods. This non-destructive testing methodology has promising potential for industry implementation. Applications to benefit from this method include the characterization of localized material properties on surface engineered components, and the post-manufacturing assessment of material properties for items such as additively manufactured metallic components and load-bearing welded joints.

Currently, the capability of the instrumented indentation test for determining material properties is limited to the elastic modulus and surface …

A Multiscale Thermomechanical Metal Additive Manufacturing Simulation And The Impact Of Geometry On Residual Stress And Distortion, Luis Fernando Silva Velasco

Masters Theses

Metal additive manufacturing is an enabling technology for the rapid prototyping and manufacturing of geometrically complex parts that would otherwise be difficult or impossible to manufacture. However, the manufacturing process can produce undesired residual stresses and distortions. The first part of the work describes the implementation of a multiscale, thermo-mechanical simulation modeling the metal powder bed fusion additive manufacturing process. NASA’s Micromechanics Analysis Code was is to incorporate the microscale effects of an evolving material porosity on the predicted macroscale residual fields. The simulation shows that modeling an evolving material porosity, as the material transitions from a metal powder to …

Engineering Properties And Microstructural Characteristics Of Cement And Geopolymer Based Mortars Using Nontraditional Supplementary Cementitious Materials, Mathialagan Sumesh

Student Works (2020-2029)

The concrete repair and rehabilitation industry grows rapidly due to deterioration, damage and defects in concrete structures. For various reasons, the concrete construction industry is not sustainable; because it consumes huge quantities of virgin materials, the usage of Portland cement as prime binder. The production of cement is a major contributor to greenhouse gas emissions. In addition, the high cost of commercial repair material. Therefore, it is necessary to develop cost-effective alternative repair materials for concrete repairs. There have been many standard repair materials available in the market, which are costly and not affordable to common people. However, research works …

Development Of Nano Carbon And Conducting Polymers Based Ternary Composites For Supercapattery, Iqbal Javed

Student Works (2020-2029)

Although significant efforts have been devoted on the development of energy storage systems such as batteries and fuel cells in the past decades, the low power density, short cyclic life and high maintenance cost have kept them away from many applications. Alternatively, supercapattery which has the characteristic features of batteries as well as supercapacitors has gained much attention because of its rapid charge/discharge mechanism, long life cycle, and high power density. However, supercapattery generally suffers from poor energy density. This research aims to develop carbon and conducting polymers based ternary nanocomposites for high performance supercapattery. Pristine metal oxide nanostructures suffer …

Precipitate Characterization In Model Al-Zn-Mg-(Cu) Alloys Using Small-Angle X-Ray Scattering, Daniel Freiberg, Wenhui Zhu, Jun Sang Park, Jonathan D. Almer, Paul Sanders

Michigan Tech Publications, Part 1

Model 7000 series alloys with and without copper were fabricated into sheets to study precipitation hardening behavior under isothermal aging conditions. Samples of each alloy were subjected to 3 h annealing treatments at various temperatures to produce a range of precipitate size distributions. Hardness, electrical conductivity, and small-angle X-ray scattering (SAXS) were used to characterize the aging behavior of the two alloys. Precipitate size distributions were modeled from the scattering curves for each annealing condition using a maximum entropy method (MEM) and compared to select transmission electron microscopy (TEM) results. The measured average precipitate diameters from TEM were in good …

Preventing Delayed Cracks In Sus304 Deep Drawn Cups Using Extreme Blank Holding Forces Aided By Nanolubrication, Ibrahim Muhammad Shafiq

Student Works (2020-2029)

This study was to investigate the formation and reformation of delayed cracks of SUS304 cylindrical drawn cups under elevated blank holding force (BHF) from 8~32 kN with 1~3 wt% SiO2 nanolubricants concentrations. The widest crack-free BHF range i.e. from 29 ~ 31 kN was determined for 2 wt% of SiO2 in the experiment. Delayed cracks were also observed below and beyond this BHF range. There was an increment of frictional force at the cup flange region when entering the crack-free BHF range, as proven by the rebound in sidewall thickness, relative intensity of α′-martensite, elongated height and drawing force beyond …

International Year Of Glass, Bill Fahrenholtz

Materials Science and Engineering Faculty Research & Creative Works

No abstract provided.

Research Of The Process Of Deformation Of Extractional Phosphoric Acid From Phosphorites Of Central Kyzylkum, Khodjamkulov Sakhomiddin, Mirzakulov Kholtura, Melikulova Gavkhar, Usmanov Ilkham

CHEMISTRY AND CHEMICAL ENGINEERING

The purpose of this research was to determine the optimal technological parameters for the purification of extraction phosphoric acid based on phosphorites of Central Kyzylkum from fluorine by precipitation with sodium salts. The influence of the norm of sodium silicate and the total norm of sodium carbonate and sodium metasilicate salts on the chemical composition and degree of precipitation of sodium silicofluoride was research. It is shown that the optimal norm of sodium metasilicate is the stoichiometric norm for binding fluorine present in the extraction phosphoric acid to silicofluoride and the total norm of sodium salts is 120-140%, the temperature …

Modeling Of Craft Oil- Water Emulsion Under Laboratory Conditions, Arslanov Sharafutdin, Dengaev Aleksey, Getalov Andrey, Sarigin Boris

CHEMISTRY AND CHEMICAL ENGINEERING

The purpose of this research is to study the possibilities of modeling oil-water emulsion in the laboratory. The study of the ratio of components and conditions of dispersion (formation) of oil-water emulsions on their stability at different settling temperatures using a laboratory model can optimize the separation of oil-water emulsions in field conditions. The possibility of modeling commercial oil and water emulsions in laboratory conditions is investigated, the average diameters of water globules in simulated oil and water emulsions at different times of their formation are determined, and the obtained average globule diameters are compared with the average diameter of …

The Possibilities Of Using Loess Clay Of Kattabog Deposit In The Production Of Ceramic Products, Ruzibaev Bahrom, Saloxidinova Salima

CHEMISTRY AND CHEMICAL ENGINEERING

The aim of the research was to determine the properties of loess clay in Kattabog deposit (Uzbekistan) to identify possible areas of use. Modern methods of physicochemical analysis are used: spectroscopic, x-ray phase, electron microscopic methods of analysis. The research results showed that the main phases of clay are hydromica, quartz, kaolinite, calcite and orthoclase. Based on the research, it can be stated that the clay of Kattabog deposit has good physical and technical properties and mineralogical composition, which is a valuable raw material for the production of various ceramics, bricks, tiles, majolica and other products.

Influence Of The Aluminum Oxide Additive On The Phase Composition Of Mullit-Forming Aluminosilicate Minerals, Mkrtchyan Ripsime, Aripova Mastura

CHEMISTRY AND CHEMICAL ENGINEERING

The aim of the research is to determine the effect of alumina on the phase composition of shale of the Jerdanak deposit and the quartz-pyrophyllite rock of the Baynaksay deposit during high-temperature firing. X-ray phase analysis determined changes in the phase composition of rocks with additives from 5 to 20% aluminum oxide as a result of firing at 1300 and 1400 °C. A comparative analysis revealed the absence of cristobalite formation, a decrease in the quartz content, and an increase in the amount of mullite for shale samples. No positive effect of alumina additives on the phase composition of quartz-pyrophyllite …

Coordination Compounds Of Copper, Cobalt And Nickel Formates With Formamide And Carbamide, Jumaniyazova Mukaddas, Azizov Tohir

CHEMISTRY AND CHEMICAL ENGINEERING

The synthesis of mixed ligand coordination compounds of copper, cobalt and nickel formates with formamide and urea in an aqueous solution was carried out. The metal content in the complexes was determined by complexometric titration. Using IR spectroscopy, it was proved that the coordination of formamide and urea with the complexing atom is carried out through the oxygen atom of the carbonyl group. The absorption spectrum of coordinated water is also present in the IR spectrum. The nature of the change in the frequency of stretching vibrations of the –OH group in the composition of water indicates its location in …

Configuration And Competitive Reactivity Of Ligands In Mixed Ligand Complexes Of Dialkylditiophosphates And Aminobenbenzimidazole (Part I: Au, Pt, Ag), Esbergenova Botakoz, Daminova Shakhlo, Kadirova Zuhra, Sharipov Khasan

CHEMISTRY AND CHEMICAL ENGINEERING

With the aim of determination of electronic and geometrical structures of mixed-ligand complexes, theoretical modeling of the structures of coordination compounds of transition metals with dialkyldithiophosphate chelating ligands with aminobenzimidazoles carried out using quantum chemical methods. Using BIOVIA Materials Accelrys Studio 2017 software packages, the geometry, electron density distribution, and frontier orbitals calculated for the mixed ligand complexes of Au(III), Pt(II), Ag(I), Cu(II), Ni(II), Fe(III), which are necessary for understanding the electronic structure of coordination compounds with chelating ligands.

Educational Cluster - Foundation Of The National Economy And Regional Innovation System, Usmonov Botir, Kushiev Khabibjon

CHEMISTRY AND CHEMICAL ENGINEERING

The paper analyzes the available resources for the creation of a cluster approach to the integration of education, science and industry in order to create a mechanism to bring the development of the economy to the level of modern requirements. The article describes the collaboration of science, education and industry through the clustering process. Ways to introduce clustering in the national innovation system are described. At the same time, the role of the integration of education, science and industry with the elements of the National Innovation System is analyzed. In conclusion, the role of the education cluster in the regional …

The Impact Of Composition And Morphology On Ionic Conductivity Of Silk/Cellulose Bio-Composites Fabricated From Ionic Liquid And Varying Percentages Of Coagulation Agents., Bailey Blessing, Cory Trout, Abneris Morales, Karleena Rybacki, Stacy A Love, Guillaume Lamoureux, Sean M O'Malley, Xiao Hu, David Salas-De La Cruz

College of Science & Mathematics Departmental Research

Blended biocomposites created from the electrostatic and hydrophobic interactions between polysaccharides and structural proteins exhibit useful and unique properties. However, engineering these biopolymers into applicable forms is challenging due to the coupling of the material’s physicochemical properties to its morphology, and the undertaking that comes with controlling this. In this particular study, numerous properties of the Bombyx mori silk and microcrystalline cellulose biocomposites blended using ionic liquid and regenerated with various coagulation agents were investigated. Specifically, the relationship between the composition of polysaccharide-protein bio-electrolyte membranes and the resulting morphology and ionic conductivity is explored using numerous characterization techniques, including scanning …

Influence Of Deposition Temperature On Properties Of Multilayered Gallium Doped Zinc Oxide Films Prepared By Dc Magnetron Sputtering Technique, Elisante Maloda, Anayesu Malisa

Tanzania Journal of Science

Multilayered transparent conducting films based on ZnO: Ga were deposited onto glass substrate by DC magnetron sputtering technique. The films were prepared from alloy (Zn: Ga) and ceramic (ZnO: Ga) targets with gallium composition of 3 at% and 4 at%, respectively. Crystal structure and phase analysis were measured using X-ray diffractometer (XRD). The XRD structural analysis results indicated that all multilayered films were polycrystalline with (002) orientation slightly shifted of diffracting angles due to gallium dopant concentrations as increase in the deposition temperatures. The films were hexagonal wurtzite structure, having preferred growth orientation in c-axis perpendicular to the substrate surface. …

Poly(Ethylene Oxide) Based Polymer Electrolytes For All-Solid-State Li-S Batteries, Xue Li, Zheng-Liang Gong

Journal of Electrochemistry

In recent years, research on lithium-sulfur (Li-S) batteries has received much attention because the sulfur positive electrode and the lithium metal negative electrode produce a high theoretical specific capacity (lithium metal ~ 3800 mAh·g^-1, sulfur ~ 1675 mAh·g^-1). In addition, sulfur is considered to be the most promising cathode material for secondary lithium batteries, due to its advantages of low price and environmental friendly. However, the practical application of conventional liquid Li-S batteries is still obstructed by several critical issues, such as lithium ploysulfides shuttle effect, long-term stability of lithium metal anode with organic liquid electrolytes, …

Synthesis And Raman Study Of Hollow Core-Shell Ni1.2Co0.8P@N-C As An Anode Material For Sodium-Ion Batteries, Jia-Hui Chen, Xiao-Bin Zhong, Chao He, Xiao-Xiao Wang, Qing-Chi Xu, Jian-Feng Li

Journal of Electrochemistry

With the increasing demand for large-scale energy storage, great progress has been made in discovering new advanced energy storage materials. Sodium-ion batteries (SIBs) have attracted much attention in recent years due to their use of abundant sodium resources and their comparable electrochemical capacity to lithium-ion batteries (LIBs). In this paper, we developed novel hollow core-shell Ni-Co bimetallic phosphide nanocubes with N-doped carbon coatings (Ni_1.2Co_0.8P@N-C) as the anode material for SIBs. The material was synthesized through a low-temperature phosphorization method using resorcinol formaldehyde (RF) resin coating with a Ni-Co Prussian blue analogue (PBA) as a template and …

Preparations Of Nano-MnoX/Ti Electrocatalytic Membrane Electrode For Catalytic Oxidation Of Cyclohexane Using Intermittent Electrodeposition, Xue Zhou, Hong Wang, Zhen Yin, Yu-Jun Zhang, Jian-Xin Li

Journal of Electrochemistry

Cyclohexanone and cyclohexanol (KA oil) obtained from highly selective oxidation of cyclohexane (CHA) show important industrial value and application prospects. In this work, the intermittent electrodeposition was developed to prepare nano-MnO_x catalyst loading porous tubular titanium membrane electrode (MnO_x/Ti), which was employed to constitute an electro-catalytic membrane reactor (ECMR) for the oxidation of cyclohexane to produce cyclohexanol and cyclohexanone. The surface morphology, crystal structure and electrochemical property of the catalysts were characterized by FESEM, XRD and electrochemical workstation, respectively. The results show that the catalyst prepared by the intermittent electrodeposition displayed nano-flower-like γ-MnO₂. Compared with …

Preparation Of Α-Hydroxylated Acetal From 2-Butanone By Indirect Electrooxidation, Hai-Qing Huang, Ye Miao, Xin-Sheng Zhang

Journal of Electrochemistry

Acetoin (3-hydroxy-2-butanone) is an important food spice. As a platform compound, it is widely used in medicine, tobacco, cosmetics, chemical material and other industries. In this paper, α-hydroxylated acetal, an intermediate of acetoin, was prepared from 2-butanone by indirect electrooxidation in the plate and frame electrolytic cell, in which graphite plates were used as both an anode and a cathode, while KOH as an electrolyte and KI as a catalyst. Acetoin could be prepared by hydrolysis in acidic aqueous solution from acetoin intermediate. The effects of current density, electrolyte flow rate between the plates, 2-butanone concentration and electrolysis temperature …

Electrochemical Oxidation Of Metal Chromium In Odium Hydroxide Aqueous Solution, Ping Han, Hai-Tao Feng, Ya-Ping Dong, Sen Tian, Bo Zhang, Wu Li

Journal of Electrochemistry

Ferrochrome electrolysis technology is a novel method for preparing sodium chromate (Na₂CrO₄). Although the method performs well at soft reaction conditions, controllable process, environmentally friendly production process, etc., the electrochemical oxidation process of metal chromium in NaOH aqueous electrolyte is still unclear. At present, there are few research articles about specific electrochemical oxidation of metal chromium in NaOH aqueous electrolyte. It is, therefore, meaningful to carry out the research in electrochemical oxidation mechanism of chromium. The electrochemical oxidation of metal chromium in 0.01 mol·L^-1 ~ 10 mol·L^-1 NaOH aqueous electrolytes at 20 °C was …

Electrochemical Response Of A Single Wire-Electrode Ac Probe In 3.5wt.% Nacl, Zhen-Wen Zou, Da-Jiang Zheng, Zi-Ming Wang, Guang-Ling Song

Journal of Electrochemistry

In this paper, a recently developed single wire-electrode AC probe technology which does not need a reference or counter electrode was employed to investigate the electrochemical corrosion and sacrificial anode protection behaviors of steel and zinc in 3.5wt.% NaCl. With this simple, fast, reliable and stable probe, the instantaneous corrosion rate and accumulated corrosion loss of carbon steel in 3.5wt.% NaCl were measured, and the results revealed that both were greater than those of zinc. Furthermore, the observed different corrosion behaviors between carbon steel and zinc during the immersion could be caused by their different surface films. With the galvanic …

Stability Studies For A Membrane Electrode Assembly Type Co2 Electro-Reduction Electrolytic Cell, Qing Mao, Bing-Yu Li, Wei-Yun Jing, Jian Zhao, Song Liu, Yan-Qiang Huang, Zhao-Long Du

Journal of Electrochemistry

Electro-catalytic reduction is an efficient way to achieve resourcable transformation of CO₂, which is one of the important techniques to solve the global environmental problems originated from excessive CO₂ emission. In this study, a membrane electrode assembly(MEA) type CO₂ electro-reduction electrolytic cell was constucted, which enables CO₂ feeding and real-time KHCO₃ aqueous updating on both sides of the cathode gas diffusion electrode (GDE). By means of the electrolytic cell, effects of KHCO₃ concentration and updating inside the liquid electrolytic chamber on CO₂ electro-reduction activity, production distribution and stability were investigated. The experimental …

Degradation Mechanism Of Lini0.83Co0.12Mn0.05O2 Cycled At 45 ℃, Hong-Yun Ma, Xiao-Hui Yao, Meng-Yao Miao, Yang Yi, Shao-Zhong Wu, Jiang Zhou

Journal of Electrochemistry

Nickel-rich layered material has been considered as the most promising one for lithium ion batteries due to its high specific capacity. To further improve the lifetime performance, it is significant to investigate the degradation mechanisms deeply. In this study, the degradation mechanism of NCM811 (LiNi_0.83Co_0.12Mn_0.05O₂) being cycled at 45^oC was systematically researched. Electrochemical impedance spectrum (EIS) results showed that the SEI resistance (R_SEI) and charge transfer resistance (R_ct) went up to 83.41% and 211.34% before and after the NCM811 material being cycled at 45^oC, …

The Interaction Of Ternary Components Of Ionic Liquid Gel Polymer Electrolytes For Lithium Metal Batteries, Xiao-Na Pan, Li-Lai Liu, Zhi-Pu Wang, Dan Wang, Yun Li, Pei-Xia Yang, Jin-Qiu Zhang, Mao-Zhong An

Journal of Electrochemistry

Ionically conductive gel polymer electrolyte is an excellent candidate due to its inflammable, nonvolatile and high thermal stability as compared to commercial liquid electrolytes which are usually flammable, volatile, and containing toxic organic solution as solvent, The synthesis and application of ionic gel polymer electrolytes in lithium ion/metal batteries have been previously reported. However, the interaction effects of N-methyl-N-propylpiperidinium bis(trifluoromethanesulfonyl)imide (PP13TFSI) ionic liquid (as plasticizer) and lithium bis(trifluoromethanesulfonyl)imide (LiTFSI) on PVDF-HFP polymer remain unclear. In this work, the molecular structure of ionic liquid gel polymer electrolyte (ILGPE) composed of PP13TFSI, LiTFSI and PVDF-HFP was studied by Raman spectroscopy and Fourier-transform …

Ordered Mesoporous Carbon/Graphene/Nickel Foam For Flexible Dopamine Detection With Ultrahigh Sensitivity And Selectivity, Lai-Yu Wang, Xin Xi, Dong-Qing Wu, Xiong-Yu Liu, Wei Ji, Rui-Li Liu

Journal of Electrochemistry

Electro-catalytic reduction is an efficient way to achieve resourcable transformation of CO₂, which is one of the important techniques to solve the global environmental problems originated from excessive CO₂ emission. In this study, a membrane electrode assembly(MEA) type CO₂ electro-reduction electrolytic cell was constucted, which enables CO₂ feeding and real-time KHCO₃ aqueous updating on both sides of the cathode gas diffusion electrode (GDE). By means of the electrolytic cell, effects of KHCO₃ concentration and updating inside the liquid electrolytic chamber on CO₂ electro-reduction activity, production distribution and stability were investigated. The experimental …