Engineering Commons^™

The Effects Of Glass Fiber Fillers On Epoxy Resin Performance, Ashton Robert Reinhold, Manuel Jose Aguirre Ii

Materials Engineering

Premature failure of filtration members in biochemical processing is a costly issue for manufacturers. This research aims to determine whether or not the premature failure due to thermal fatigue in medical filtration devices can be mitigated by glass fiber addition. The study was conducted to identify the effects of e-glass fiber filler content in an epoxy matrix on the mechanical and thermal properties of the epoxy system. The epoxy was evaluated over a filler content of 0-50wt% in level increments of 12.5wt% and temperatures ranging from ambient to 160°C in increments of 15°C. Cylindrical and tensile bar specimens were prepared …

Solvent Analysis Of Phenolic Resin Glass Fiber Reinforced Prepreg During Out-Time, Sixin Zhai, Crystal Ipong

Materials Engineering

Phenolic resin glass fiber reinforced prepregs are highly suitable for airplane interior components due to their high fire resistance, high temperature performance, and low-density characteristics. Safran Cabin seeks to improve their storage of the phenolic resin prepreg during their manufacturing process. The issues the company faces are the occasional delamination of prepreg laminas or the loss of tackiness rendering the lamina unfit for use. The area of investigation was determining the weight loss of volatiles during out-time. The term “out-time” consists of the time the prepreg experiences in transit, on the shop floor, and in short-term temperature-controlled storage. Simulated storage …

Reducing The Fouling Of Microfiltration Membranes Through Uv-Initiated Surface Modifications Using Poly (Ethylene Glycol) Based Monomers, Christopher Lo, Matthew Truong

Materials Engineering

Meissner Filtration Product Inc. designs and manufactures membranes for food and beverage, microelectronics, ultrapure chemicals, and pharmaceutical industries. Membrane filters utilized in these industries have lifetimes greatly limited due to membrane fouling. Increasing membrane lifetime will reduce downtime, waste, and cost of operation. The proposed project is aimed to develop a methodology for synthesizing a fouling-resistant polymer coating layer on hydrophobic membrane surfaces for reducing membrane fouling and increasing membrane filterability (membrane lifetime) that are critical for effective membrane operations in the pharmaceutical industry. In this study, commercial membranes were coated with a solution containing a monomer, crosslinker, and photoinitiator …

Development Of A Marine Biodegradable Target Balloon, Blake Samuel Robinson, Arash Sam Akhavi, David Leonardo Albarran-Martinez

Materials Engineering

The US Navy utilizes PVC target balloons, known as Killer Tomatoes, that are inflated onboard a naval vessel then deployed into the ocean to calibrate a variety of weaponry. The Navy has requested the investigation of biodegradable polymers to replace the PVC in attempts to reduce ocean waste that is generated from the leftover PVC material. After communicating with American Pacific Plastic Fabricators (APPF), the current manufacturer of the Killer Tomatoes, we gained an understanding of the manufacturing process and the material requirements that would allow a new material to be integrated into their current process. Two proprietary, trial polymers …

Strengthening Of 7175 Aluminum Alloy Through Multi-Step Aging Process, Colin E. Masterson, Ryland W. Jolliffe

Materials Engineering

7175 is a heat-treatable aluminum alloy commonly used in aerospace forgings. This alloy is aged with a multi-step heat treatment. This treatment must balance strength with stress corrosion cracking resistance through a degree of overaging. The team was tasked by Weber Metals to increase the strength of this treatment without sacrificing stress corrosion cracking resistance. Both two-step and retrogression and reaging treatments were tested in experiments to find a heat treatment that could increase the yield and tensile strength by 1-2 ksi while maintaining a minimum electrochemical conductivity equivalence of 38% relative to copper. Two-step aging is the more conventional …

Pressure Driven Desalination Membranes: Lyotropic Liquid Crystals Containing Single Walled Carbon, Matteo A. Del Giudice, Samantha Castillo Merigold

Materials Engineering

This project presents a potential alternative desalination technique that utilizes the ion rejection properties of single walled carbon nanotubes dispersed in a lyotropic liquid crystal (LLC) matrix. Previous research has pointed to the polymerizable surfactant methacryloxy ethyl hexadecyl dimethyl ammonium bromide (C16MA) having capabilities of filtering molecular components smaller than a nanometer, when oriented in cylindrical micelles. SWCNTs were dispersed in deionized water by probe sonication and addition of surfactant cetyltrimethylammonium bromide (CTAB) due to SWCNTs’ hydrophobic properties. Membranes were produced containing 55wt% C16MA, 37wt% DI water, 0.1wt% with respect to the monomer (WRM) SWCNTs, 1.9 wt% WRM 2,2-dimethoxy-2-phenylacetophenone (photointiator), …

Quantum Transport Of The 2d Surface State In A Nonsymmorphic Semimetal, Xue Liu, Jin Hu, Jiang Wei, Chunlei Yue, Sergey V. Erohin, Yanglin Zhu, Abin Joshy, Jinyu Liu, Ana M. Sanchez, David Graf, Pavel B. Sorokin, Zinqiang Mao

Physics Faculty Publications and Presentations

In a topological semimetal with Dirac or Weyl points, the bulk-boundary correspondence principle predicts a gapless edge mode if the essential symmetry is still preserved at the surface. The detection of such topological surface state has been considered as the fingerprint prove for crystals with nontrivial topological bulk band. On the contrary, it has been proposed that even with symmetry broken at the surface, a new surface band can emerge in nonsymmorphic topological semimetals. The symmetry reduction at the surface lifts the bulk band degeneracies and produces an unusual “floating” surface band with trivial topology. Here, we first report quantum …

Metallurgical And Thermal Processing Investigation Of Additively Manufactured Superalloys Jbk-75 And Nasa-Hr-1, Allyse Birken, Derek Noel

Materials Engineering

Aerojet Rocketdyne is investigating the use of directed energy deposition (DED), an additive manufacturing process, to reduce cost and lead time for manufacturing complex rocket engine components for their RS-25 engines. JBK-75 and NASA-HR-1, two Fe-Ni-base, age-hardenable (γ′) superalloys, are used for nozzle structural jackets and hot gas manifolds. Currently, these parts are produced using traditional forging or casting methods followed by intensive machining operations. Additionally, these alloys were designed for use in the wrought condition and require a different set of post-processing heat treatments when produced using DED due to their dendritic, segregated microstructure in the as-built condition. Homogenization …

Novel And Fast Peridynamic Models For Material Degradation And Failure, Siavash Jafarzadeh

Department of Mechanical and Materials Engineering: Dissertations, Theses, and Student Research

Fracture is one of the main mechanisms of structural failure. Corroded surfaces with chemically-induced damage are, notably, potential sites for crack initiation and propagation in metals, which can lead to catastrophic failure of structures. Despite some progress in simulating fracture and damage using classical models, realistic prediction of complex damage progression and failure has been out of reach for many decades. Peridynamics (PD), a nonlocal theory introduced in 2000, opened up new avenues in modeling material degradation and failure. Existing numerical methods used to discretize PD equations, however, are quite expensive as the PD nonlocal interactions make them unaffordable for …

High Performance Mixed-Matrix Electrospun Membranes For Ammonium Removal From Wastewaters, Shu-Ting Chen, Sumith Ranil Wickramasinghe, Xianghong Qian

Chemical Engineering Faculty Publications and Presentations

Mixed-matrix electrospun membranes were developed to investigate ammonium removal from low ammonium concentration wastewaters for the first time. Particles derived from the inexpensive zeolite 13X were successfully incorporated into polyethersulfone (PES) matrices. The fabricated mixed-matrix electrospun membranes demonstrate high ammonium removal capacity reaching over 55 mg/g_zeolite, more than 2.5 times higher than the previously fabricated mixed-matrix membranes via non-solvent induced phase inversion. Moreover, the membranes fabricated exhibit high permeability and ease of regeneration. Over 90% of total ammonium nitrogen (TAN) can be removed from low TAN wastewaters such as aquaculture wastewaters. In addition to zeolite 13X, other zeolite …

Enhancement Of Asphalt Performance By Graphene-Based Bitumen Nanocomposites, Sara Moghtadernejad, Ehsan Barjasteh, Ren Nagata, Haia Malabeh

Mineta Transportation Institute

As the State of California continues to grow, demand for enhanced infrastructure such as roadways and highways escalates. In view of the current average highway lifespan of 15–20 years, the improvement of asphalt binders leads to material sustainability by decreasing required maintenance and increasing the lifespan of roadways. In the present investigation, enhancement of asphalt binder properties was achieved by different methods of mixing varying compositions of graphene nanoparticles with an SBS polymer and asphalt binder. Additionally, experimental evaluation and comparison of the rheological and mechanical properties of each specimen is presented. Graphene nanoparticles have attracted great curiosity in the …

Mechanical Properties, Translucency, And Low Temperature Degradation (Ltd) Of Yttria (3–6 Mol%) Stabilized Zirconia, R. Sharon Uwanyuze, Sulekha Ramesh, Mark K. King, Nathaniel Lawson, Manoj K. Mahapatra

Materials Science and Engineering Faculty Research & Creative Works

The mechanical properties (hardness and biaxial flexural strength), optical properties (translucency and gloss), and low temperature degradation (LTD) of 3–6 mol% yttria stabilized zirconia have been investigated. The specimens were prepared by conventional solid-state sintering at 1400 °C. The mechanical and optical properties were evaluated for sintered and polished specimens. X-ray diffractometer (XRD) and scanning electron microscope (SEM) were used, respectively, for structural and microstructural investigation. LTD was determined by XRD analysis of the samples aged in a hydrothermal autoclave at 134 °C for 5–108 h. The mechanical and optical properties are found to be microstructure sensitive. The LTD, due …

First-Principles Density Functional Theory Studies On Perovskite Materials, Aneer Lamichhane

Dissertations

Perovskites are a family of materials with a diverse combination of different elements. As a consequence, they exhibit numerous functionalities such as pyroelectric, piezoelectric, ferroelectric, and ferromagnetic with applications in photovoltaic cells, LEDs, superconductivity, colossal magneto-resistance, and topological insulators. After 2009, perovskites have gained notoriety as suitable materials for solar cells and alternative candidates to silicon-based conventional solar cells. Generally, oxide perovskites exhibit good dielectric properties, halide perovskites display good photonic qualities, and chalcogenide perovskites are used in applications in solid-state lighting, sensing, and energy harvesting. In this dissertation, various types of perovskites ranging from oxide to halide are investigated …

Fluorine-Based Inorganic Oxidizers For Use In Metal-Based Reactive Materials, Siva Kumar Valluri

Dissertations

This work explores inorganic fluorides as oxidizers for fuel-rich reactive materials. A preliminary assessment of metal fluorides accounting for their enthalpy of formation points to bismuth (III) fluoride, BiF3 and cobalt (II) fluoride, CoF2 as oxidizers of interest. Initially, composite powders of aluminum with chosen fluorides at 50-50 wt. % are prepared by arrested reactive milling. Despite an increase in reactivity and lowtemperature ignition, the prepared composite powders are insensitive to initiation by electro-static discharge (ESD), making them attractive alternative to analogous thermites having very high ESD sensitivity. In air, the composite powder particles burn faster than reference aluminum particles …

Controlled Reduction Of Graphene Oxide And Graphene Oxide-Carbon Nanotube Hybrids And Their Applications, Samar Azizighannad

Dissertations

Graphene and graphene derivatives are widely used in diverse research and industrial applications. Graphene production on a large scale is carried out by exfoliating graphite oxide and producing graphene oxide (GO), which comprises of graphene sheets with different oxygen-containing functional groups such as hydroxyl, carboxyl, and carbonyl. GO is reduced to reduced graphene oxide (rGO), which has properties that are closer to graphene. Properties of GO and rGO depend upon the oxygen content, and the effect of reducing oxygen content on the aqueous behavior of rGOs is not well understood.

In an effort to understand how properties of rGO change …

Copper Slag As A Potential Waste Filler For Polyethylene-Based Composites Manufacturing, Aleksander Hejna, Paulina Kosmela, Mateusz Barczewski, Olga Mysiukiewicz, Adam Piasecki

Tanzania Journal of Science

The present study aimed to analyze the application of waste material from copper production– copper slag (ŻŻL) as filler for composites based on the high-density polyethylene (HDPE). Copper slag filler was introduced in the amounts of 1–20 wt%, and its influence on the appearance (color analysis), chemical structure (Fourier-transform infrared (FTIR) spectroscopy), microstructure (optical microscopy), as well as static (tensile tests) and dynamic (dynamical mechanical analysis (DMA)) mechanical properties of composites were investigated. Proper dispersion of filler implicated that the incorporation of up to 5 wt% of filler caused only slight, 5% drop of tensile strength, with the simultaneous 16% …

Influence Of Carbonitriding Conditions On Phase Composition And Residual Stresses For 20mncr5 Low Alloy Steel, Richard J Katemi, Jeremy Epp

Tanzania Journal of Science

This paper reports an investigation of the influence of carbonitriding conditions for 20MnCr5 low alloy steel. Three gaseous carbonitriding conditions were investigated based on different carbon and nitrogen potentials to attain varying levels of carbon between 0.62 and 0.93% mass, whereas for nitrogen between 0.19 and 0.26% mass at the surface. Analysis of retained austenite and residual stress distributions was conducted using X-ray diffraction technique. The effective case depth varied between 900 and 1200 µm. The case microstructures were characterized by varying proportions of retained austenite and martensite, while the core contained essentially bainitic microstructures. The maximum amount of retained …

Upgrading Biogas Using Eburru Zeolitic Rocks And Other Adsorbent Materials To Remove Carbon Dioxide And Hydrogen Sulphide, James K Mbugua, Joseph M Mwaniki, Damaris M Nduta, Francis B Mwaura

Tanzania Journal of Science

The trace amounts of carbon dioxide and hydrogen sulfide in raw biogas lower its calorific value,cause corrosion and make it hard to compress biogas into the cylinder. Raw biogas was obtainedfrom anaerobic digestion of cow dung and market wastes. The gas was stored in tubes or urine bagbefore upgrading. Natural zeolite rocks, maize cobs, steel wire, desulphurizer, and worn-out tyreswere used as the upgrade materials. The composition of biogas was recorded before and afterupgrading using a GP180 portable biogas analyzer from Henan, China. The measured level of rawbiogas was 0.0227% H2S, >20% CO2 and 52-56% CH4. The most efficient upgrade …

Assessment Of Natural Radioactivity And Radiation Hazards Of Building Materials In Kinondoni District, Dar Es Salaam, Tanzania, Huruma P Mammba, Vitus A Balobegwa, Alex P Muhulo, Peter A Pantaleo, Remigius A Kawala

Tanzania Journal of Science

Natural radionuclides from building materials are one of the potential sources of external as well as internal radiation exposure to the human body. Currently, this exposure has been increasing since people spend more than  of their time indoors (ICRP 1991). Commonly used building materials from Kinondoni District were investigated using γ-spectrometry; their activity concentrations of 226Ra, 232Th and 40K in Bq/kg were measured. The results showed that average values of activity concentrations of 226Ra, 232Th and 40K were 15.62, 21.51 and 237.99 Bq/kg, respectively. All the activity concentrations in the studied samples were lower than the world average values of …

Use Of Biomimicry Design Approach In Constructing Sustainable Resilient Structures (Case Study: Port Of Beirut), Farouk Bader, Marwan Halabi, Hiba Mohsen, Maged Youssef

BAU Journal - Creative Sustainable Development

Resiliency is not the same as sustainability, nor its substitute, but definitely the two concepts complement each other’s. Sustainability is the avoidance of depletion of natural resources to maintain ecological balance whereas resiliency is to recover, adapt and keep going in the face of setbacks. While designing with green approach is important but what will happen to leed points if the building becomes uninhabitable due to disasters, that’s where resiliency comes into play. The 2019 statistics showed that natural disasters accounted for 133 billion dollars losses and manmade ones accounted for other 7 billion in addition to 11,755 people worldwide …

First-Principles Studies Of Substituent Effects On Squaraine Dyes, German Barcenas, Austin Biaggne, Olga A. Mass, Christopher K. Wilson, Ryan D. Pensack, Jeunghoon Lee, William B. Knowlton, Bernard Yurke, Lan Li

Materials Science and Engineering Faculty Publications and Presentations

Dye molecules that absorb light in the visible region are key components in many applications, including organic photovoltaics, biological fluorescent labeling, super-resolution microscopy, and energy transport. One family of dyes, known as squaraines, has received considerable attention recently due to their favorable electronic and photophysical properties. In addition, these dyes have a strong propensity for aggregation, which results in emergent materials properties, such as exciton delocalization. This will be of benefit in charge separation and energy transport along with fundamental studies in quantum information. Given the high structural tunability of squaraine dyes, it is possible that exciton delocalization could be …

Cyclic Regeneration Of Nanostructured Composites For Catalytic Applications, Fatih Dogan

Materials Science and Engineering Faculty Research & Creative Works

A cermet catalyst material, defining a matrix having interconnected open pores, the matrix selected from the group consisting of YSZ and CGO and defining a substrate, a ceramic coating having a general formula AyBnOx at least partially coating the pores, and a plurality of metal particles A at least partially embedded in the ceramic coating. A is selected from the group consisting of Co, Cu, Ce, Ni, Ti, and combinations thereof and B is selected from the group consisting of Mo, W, Ce, and combinations thereof. When the coating is in a first oxidizing atmosphere and at a temperature between …

Mash 2016 Test Level 3 And Test Level 4 Evaluation Of Roadside Safety Barrier With Pedestrian Features, Miguel Angel Hinojosa Palacios

Department of Mechanical and Materials Engineering: Dissertations, Theses, and Student Research

The Minnesota Department of Transportation (MnDOT) desires to use a vehicle, bicycle, and pedestrian combination bridge railing system along pedestrian and bicycle bridge paths. The system was evaluated per MASH 2016.

In full-scale crash test no. MNPD-3, the system was evaluated according to MASH test designation no. 3-11. The 2014 Dodge Ram 1500 crew cab pickup truck impacted the system 71¼ in. upstream from the centerline of post no. 4 with a speed of 63.4 mph at an angle of 25.3 degrees. The combination railing system was found to meet the AASHTO MASH 2016 TL-3 impact safety criteria.

MnDOT uses …

Effects Of Air Pollution, Temperature And Moisture Content On Copper And Silver Corrosions And The Reliability Of Data Center Equipment, Rui Zhang

Dissertations - ALL

The effects of moisture content, temperature, and pollutant mixture on atmospheric corrosion of copper and silver were investigated by exposing test specimens to different environmental conditions, followed by surface characterization using the coulometric reduction, Scanning Electron Microscopy, and Energy Dispersive Spectrometry (SEM/EDS). Printed circuit board test cards (PCBs) with bare copper were also used to investigate the effects of voltage bias on the PCBs on the corrosion rate. The test specimens were exposed to mixed flowing gases (MFG) environment with eight different combinations of the following five pollutants at the fixed concentration levels: 60 ppb O3, 80 ppb NO2, 40 …

Effects Of Air Pollution, Temperature And Moisture Content On Copper And Silver Corrosions And The Reliability Of Data Center Equipment, Rui Zhang

Dissertations - ALL

The effects of moisture content, temperature, and pollutant mixture on atmospheric corrosion of copper and silver were investigated by exposing test specimens to different environmental conditions, followed by surface characterization using the coulometric reduction, Scanning Electron Microscopy, and Energy Dispersive Spectrometry (SEM/EDS). Printed circuit board test cards (PCBs) with bare copper were also used to investigate the effects of voltage bias on the PCBs on the corrosion rate. The test specimens were exposed to mixed flowing gases (MFG) environment with eight different combinations of the following five pollutants at the fixed concentration levels: 60 ppb O3, 80 ppb NO2, 40 …

Composite Elastomer Materials Based On New Ingredients, Akhmadjon Ibadullaev, Elmira Teshabaeva, Murodjon Vapaev

CHEMISTRY AND CHEMICAL ENGINEERING

The results of a study present the effect of new modified ingredients on the complex of properties of composite elastomeric materials. Methods for modifying mineral fillers have developed. It found that the introduction of modified ingredients into the composition of elastomeric compositions enhances the interfacial interaction at the “rubber-filler” interface and the formation of additional bonds between rubber macromolecules and functional groups, resulting in an improvement in the complex of properties of the compositions. New accelerators, activators for vulcanization of rubbers and plasticizers with stabilizing properties have proposed, and their optimal contents in the composition have determined.

Composition For Protecting Technological Equipment Against Salt Deposits And Internal Corrosion, Hasan Kadirov, Sadritdin Turabdjanov

CHEMISTRY AND CHEMICAL ENGINEERING

Aimed studies on the synthesis of metal complexonates have carried out. The reaction of obtaining zincate zincate oxyethylene diphosphonic acid OEDP has studied. On the basis of synthesized zincate-OEDP, compositions of corrosion inhibitors and deposits of mineral salts with the addition of a vacuum residue of monoethanolamine (RMEA) and polyaminocrotanol (PKI-3), which are able to effectively suppress corrosion processes in environments with different initial corrosive activity, have been compiled. It is proved that the high efficiency of the composition OEDP : zincate-OEDP : PKI-3 (maximum protective effect - 97.9%) is much more effective than the composition OEDP : zincate-OEDP : …

Rational Disposal Of Pet Containing Waste And Prospects For The Synthesis Of New Polymers, Asror Juraev, Muzaffar Alimukhamedov, Ravshan Adilov, Farhod Magrupov

CHEMISTRY AND CHEMICAL ENGINEERING

As a result of the research on the utilization of polyethylene terephthalate-containing household waste, a promising direction was identified in the production of a new type of secondary polyethylene terephthalate (SPET) - unsaturated polyesters.It was revealed that the final product, which formed when the alcoholization process is complete in any proportion of of glycol and secondary polyethylene terephthalate, is the bisalkylent terephthalate of terephthalic acid; the content of the alcoholysis product consists of bisalkylent terephthalate, different molecule mass, functionally hydroxyl-containing complex polyester polyol and free diols.

The laws of alcoholization of secondary …

Layered Bismuth Tungstate: Heterogeneous Photocatalysis For Environmental Remediation, Mirabbos Hojamberdiev, Zuhra Kadirova, Shahlo Daminova, Khasan Sharipov, Nobuhiro Matsushita

CHEMISTRY AND CHEMICAL ENGINEERING

Air and water pollution has been one of the challenging environmental issues in modern society. Since the Honda-Fujishima effect was first reported in 1972, a semiconductor-based photocatalysis has been regarded as one of the most green and economical processes for potential application in environmental remediation. Bismuth-based semiconductors are regarded as a promising group of advanced photocatalytic materials due to their suitable band gap for visible light response, an increased mobility of photo-generated charge carriers because of well-dispersed Bi 6s orbital, non-toxicity, and easy tailoring of their morphologies. To utilize its full potential in environmental remediation, various studies have been carried …

Chitosan/Gelatin/Silver Nanoparticles Composites Films For Biodegradable Food Packaging Applications., Sreelekha Ediyilyam, Bini George, Sarojini Sharath Shankar, Thomas Thuruthiyil Dennis, Stanisław Wacławek, Miroslav Černík, Vinod V T Padil

Department of Medicine Faculty Papers

The food packaging industry explores economically viable, environmentally benign, and non-toxic packaging materials. Biopolymers, including chitosan (CH) and gelatin (GE), are considered a leading replacement for plastic packaging materials, with preferred packaging functionality and biodegradability. CH, GE, and different proportions of silver nanoparticles (AgNPs) are used to prepare novel packaging materials using a simple solution casting method. The functional and morphological characterization of the prepared films was carried out by using Fourier transform infrared spectroscopy (FTIR), UV-Visible spectroscopy, and scanning electron microscopy (SEM). The mechanical strength, solubility, water vapor transmission rate, swelling behavior, moisture retention capability, and biodegradability of composite …