Engineering Commons^™

Possible Developments Of The Industrialization Of Appropriate Building Subsystem For Iraq, Wisam William Saleem Al-Ayoubi

Al-Esraa University College Journal for Engineering Sciences

Industrialization of building has developed very rapidly in industrialized countries as well as in many other parts of the world to fulfill the need for housing and public buildings after the Second World War. Prefabricated building is defined as a type of building that consists of several elements or modular units prepared in advance and assembled on-site. The term prefabricated indicates that these building elements are manufactured in the workshop or factory and then combined with other elements. Iraq has witnessed vital development in the construction industry sector. The study investigates the appropriate technology for Iraq, considering resources, economy, labor, …

Ion Exchange Method For Sulphate Removal From Treated Wastewater Of Al-Doura Refinery, Rana Mohammed Rasheed

Al-Esraa University College Journal for Engineering Sciences

The treated wastewater by the industrial Wastewater Treatment Plant (WWTP), commonly named (INGECO) in Al-Doura refinery, suffers from highly sulfate concentrations that exceed the EPA specified limits of 250 mg/L. Laboratory water quality historical data have been reviewed and analyzed to determine the annual rate, maximum, and peak sulfate concentrations, which were found to be 360 mg/L, 425 mg/L, and 550 mg/L, respectively. A field inspection was conducted to identify the reasons for the high sulfate concentrations in the wastewater of most refinery process units. It was found that the maximum required sulfate remaining concentration should not exceed 10 mg/L …

The Effect Of The Spirit Of The Place On The Formulation Of Emotion In Contemporary Arab-Islamic Architecture, Mahdi Saleh Al-Faraj, Dania Saleh Yaheia

Al-Esraa University College Journal for Engineering Sciences

Arab-Islamic architecture is characterized by both constants and variables, with spiritual aspects (content) representing the constants and physical aspects (form) representing the variables. It evolves based on changing times and needs, with compassion being a significant feature associated with its spiritual aspects. Compassion is essential for collective agreement and individual emotional connection in Arab-Islamic architecture. The present research aims to investigate the influence of the spirit of the place, as embraced by designers, on the emotional characteristics of contemporary Arab-Islamic architecture. The research problem identified is the lack of a theoretical concept regarding the impact of the spirit of the …

The Effect Of Bioenergy Systems On The Architectural Product The Effect Of Fung Shui And Biogetric To Achieve The Performance Of Architectural Space, Abdullah Saadon Al-Mamoory, Ann Samari Ibrahim

Al-Esraa University College Journal for Engineering Sciences

This research presents an analytical study exploring the vital systems of energy science and their influence on architecture by examining ancient environmental philosophies like Feng Shui in China and bio-geometry in Egypt. These philosophies serve as guiding principles for studying energy and its impact on human daily life, highlighting their effects on integrated ecosystems in the design of residential buildings at both external and internal levels. The study examines key aspects such as the influence of energy on furniture arrangement in living spaces. The primary objective is to establish a synergistic relationship between architectural design of residential spaces during occupancy …

Some Aspects Of The Suitability Of Three-Story Residential Buildings For Vertical Housing In Iraq, Wisam William Saleem Al-Ayoubi

Al-Esraa University College Journal for Engineering Sciences

This research initially aimed to examine the changes in housing since the 1930s, driven by rapid population growth and evolving lifestyles, juxtaposed with advancements in contemporary building materials that are environmentally compatible. After a comprehensive analysis of housing and living arrangements throughout history, including the evolution of open house units towards more interior-focused designs such as the Baghdadi house with its central courtyard, the study delved into the significant changes and the challenges posed by the rapid population growth. The focus of the study was on the viability of vertical housing in Iraq and the considerations related to low-rise residential …

Role Of Iconic Architecture In Sustainable Tourism Development, Basim H. H. Al-Majidi, Ann Samari Ibrahim

Al-Esraa University College Journal for Engineering Sciences

Architecture "is an expression of the way of life and the spirit of the ages and cultures in which I grew up" as the buildings speak for themselves. While tourism is a scenario "to define a city to an unfamiliar audience and acquire an identity for a citizen". Both architecture and tourism have been linked together since time immemorial. Architecture was the main aspect of attracting crowds, while tourism helped architecture survive the test of time as well as money. Both tourism and architecture operate in a symbiotic manner to break the lack of familiarity with any culture and to …

Advanced Research And Development Of Face Masks And Respirators Pre And Post The Coronavirus Disease 2019 (Covid-19) Pandemic: A Critical Review, Ebuka A. Ogbuoji, Amr M. Zaky, Isabel C. Escobar

Chemical and Materials Engineering Faculty Publications

The outbreak of the COVID-19 pandemic, in 2020, has accelerated the need for personal protective equipment (PPE) masks as one of the methods to reduce and/or eliminate transmission of the coronavirus across communities. Despite the availability of different coronavirus vaccines, it is still recommended by the Center of Disease Control and Prevention (CDC), World Health Organization (WHO), and local authorities to apply public safety measures including maintaining social distancing and wearing face masks. This includes individuals who have been fully vaccinated. Remarkable increase in scientific studies, along with manufacturing-related research and development investigations, have been performed in an attempt to …

Investigation Of Single, Binary, And Ternary Metal Oxides Of Iridium, Rhodium, And Palladium For Neural Interfacing Applications, Gregory Vincent Taylor

Theses and Dissertations

In this dissertation, thin film single, binary, and ternary metal oxides of iridium (Ir), ruthenium (Ru), rhodium (Rh), and palladium (Pd) were synthesized for use as electrode/microelectrode coatings for neural interfacing applications using DC reactive magnetron sputtering. Synthesis conditions which enhanced the electrochemical properties of films as measured by cyclic voltammetry and electrochemical impedance spectroscopy in a phosphate buffered saline solution of the single metal oxides were identified to be 30 mTorr working pressure, 20% oxygen partial pressure, and cathode power densities ≤ 4.9 W/cm². These parameters were then used to develop the binary and ternary metal oxide …

Assessment Of Carbon Dioxide Emission And Its Impact On High-Rise Mixed-Use Buildings In Egypt, Ahmed Salah Hamza

Theses and Dissertations

With Egypt's vision of 2030 focusing on sustainable development with a true emphasis on Carbon Dioxide (CO₂) emission reduction in the newly built cities and high-rise buildings, efforts are exerted on various levels towards accomplishing the vision’s goals. This is achieved through multiple tools and models associated with aiding the reduction of carbon emissions, yet not a clear one was introduced for the mixed-use buildings in Egypt.

Through this work, a significant gap was identified with respect to high-rise buildings carbon emission assessment in Egypt. This was a main driving force for this work in an attempt to …

Heated Assembly And Transfer Of Van Der Waals Heterostructures With Common Nail Polish, Kristine L. Haley, Jeffrey A. Cloninger, Kayla Cerminara, Randy M. Sterbentz, Takashi Taniguchi, Kenju Watanabe, Joshua O. Island

Physics & Astronomy Faculty Research

Recent advances in the manipulation and control of layered, two-dimensional materials has given way to the construction of heterostructures with new functionality and unprecedented electronic properties. In this study, we present a simple technique to assemble and transfer van der Waals heterostructures using common nail polish. Commercially available nail polish acts as a resilient sticky polymer, allowing for the fabrication of complex multi-material stacks without noticeable fatigue. Directly comparing four commercially available brands of nail polish, we find that one stands out in terms of stability and stacking characteristics. Using this method, we fabricate two top-gated devices and report their …

Impact Of Green And White Roofs On Air Handler Filters And Indoor Ventilation Air, Pradeep Ramasubramanian, Irvan Luhung, Serene B. Y. Lim, Stephan C. Schuster, Olyssa Starry, Elliott T. Gall

Mechanical and Materials Engineering Faculty Publications and Presentations

Rooftop surfaces near building outdoor air intakes may contribute to the mass loading on filters and compounds emitted to ventilation air downstream of the filter. In laboratory analyses, we characterized microbial composition, primary volatile organic compound (VOC) emissions, ozone removal rates, and VOC emissions in the presence of ozone on filters collected from air handlers located on the green and white roof sections of a big-box retail store. Total DNA masses per area of filter were 26.3 ± 11.9 ng cm−2 and 6.3 ± 6.5 ng cm−2 for green and white roof filters respectively, with higher mass observed in winter …

A Three-Dimensional Musculoskeletal Model Of The Dog, Heiko Stark, Martin S. Fischer, Alexander Hunt, Fletcher Young, Roger Quinn, Emanuel Andrada

Mechanical and Materials Engineering Faculty Publications and Presentations

Abstract The domestic dog is interesting to investigate because of the wide range of body size, body mass, and physique in the many breeds. In the last several years, the number of clinical and biomechanical studies on dog locomotion has increased. However, the relationship between body structure and joint load during locomotion, as well as between joint load and degenerative diseases of the locomotor system (e.g. dysplasia), are not sufficiently understood. Collecting this data through in vivo measurements/records of joint forces and loads on deep/small muscles is complex, invasive, and sometimes unethical. The use of detailed musculoskeletal models may help …

Detection Of Subsurface, Nanometer-Scale Crystallographic Defects By Nonlinear Light Scattering And Localization, Farbod Shafiei, Tommaso Orzali, Alexey Vert, Mohammad-Ali Miri, Pui Yee Hung, Man Hoi Wong, Andrea Alù, Gennadi Bersuker, Michael C. Downer

Advanced Science Research Center

Heteroepitaxial crystalline films underlie many electronic and optical technologies but are prone to forming defects at their heterointerfaces. Atomic-scale defects such as threading dislocations that propagate into a film impede the flow of charge carriers and light degrading electrical/optical performance of devices. Diagnosis of subsurface defects traditionally requires time-consuming invasive techniques such as cross-sectional transmission electron microscopy. Using III–V films grown on Si, noninvasive, bench-top diagnosis of subsurface defects have been demonstrated by optical second-harmonic scanning probe microscope. A high-contrast pattern is observed of subwavelength “hot spots” caused by scattering and localization of fundamental light by defect scattering sites. Size …

A Review On Alpha Case Formation And Modeling Of Mass Transfer During Investment Casting Of Titanium Alloys, R. Sharon Uwanyuze, Janos E. Kanyo, Sarah F. Myrick, Stefan Schafföner

Materials Science and Engineering Faculty Research & Creative Works

Titanium alloys have excellent corrosion resistance, high temperature strength, low density, and biocompatibility. Therefore, they are increasingly used for aerospace, biomedical, and chemical applications. Investment casting is a well-established process for manufacturing near-net-shape intricate parts for such applications. However, mass transfer arising from metal-mold reactions is still a major problem that drastically impairs the surface and properties of the castings. Although there have been astounding developments over the past 20 years, they remain scattered in various research papers and conference proceedings. This review summarizes the current status of the field, gaps in the scientific understanding, and the research needs for …

Electromagnetic Wave Propagation For Industry And Biomedical Applications, Fred Lacy

Faculty Publications

Superconductors have a wide array of applications, such as medical imaging, supercomputing, and electric power transmission, but superconducting materials only operate at very cold temperatures. Thus, the quest to engineer room temperature superconductors is currently a hot topic of research. To accomplish this mission, it is important to have a complete understanding of the material properties that are being used to create these superconductors. Understanding the atomic and electromagnetic properties of the prospective materials will provide tremendous insight into the best choice for the materials. Therefore, a theoretical model that incorporates electromagnetic field theory and quantum mechanics principles is utilized …

Minimizing Leakage In Thin Walled Structures Printed Through Selective Laser Melting, Andrew Spencer Yap

Master's Theses

In this project, the scan strategy of selective laser melting (SLM) for thin walled structures was investigated by changing laser parameters and tool path. Producing thin walled structures is difficult due to defects such as warpage and porosity. A layer on the SLM 125 consists of hatch volume, fill contours, and borders, however, for thin walls, hatch volume can become unavailable, resulting in a solely border/fill contour laser tool path.

Three central composite designs (CCD) were created to optimize the laser parameters of borders to minimize leakage rate and porosity. The two factors changed were border laser power and scanning …

Analysis Of The Use Of Waste Material In 3d Printing, Alexander Laurence

Materials Engineering

Globally, only 9% of plastic by mass is recycled. Allowing consumers to directly convert polyethylene terephthalate (PET) waste into 3D filament can increase the recycling rate by reducing contamination and costs from traditional large-scale recycling methods. This was tested by heating strips of PET to various temperatures within its glass transition region and pressing a roller with a 1.75 mm indentation against it to observe strip deformation. PET was also placed in a hemispherical well with a 1.75 mm diameter hole at the bottom and heated above its melting temperature to determine the mass of PET required to extrude 3D …

Effect Of Distal Core Flattening On 304 Stainless Steel Guide Wires, Khanh Phan

Materials Engineering

Abbott Vascular produces a variety of medical guide wires to accommodate a wide array of minimally invasive medical procedures. Certain types of these wires have the distal core flattened to improve specific properties such as flexibility and steerability. However, it is unknown how this affects the other mechanical properties of the wire. Abbott Vascular provided two types of wire to test the effects of distal core flattening on the mechanical performance of the wires. One group of wires was made from 304 single spring stainless steel with no flattening performed. The other group of wires was made from 304 triple …

Void And Density Analysis Of Cyanate Ester Composites, Cameron B. Atwood

Materials Engineering

In large scale composite manufacturing, voids and their frequency within prepreg materials play an important role in predicting the mechanical properties of a final composite laminate. The industry standard process for determining voids in composite materials is through resin digestion and resin ignition via ASTM D3171. One limitation to this standard is its ability to frequently produce negative void volume values in quality control testing, due to the calculation sensitivity of input resin and fiber densities. For this reason, Toray Advanced Composites wanted to investigate the process steps of ASTM D3171 to determine if discrepancies in resin density data may …

Artificial Intelligence In Real-Time Diagnostics And Prognostics Of Composite Materials And Its Uncertainties – A Review, Muthu Ram Prabhu Elenchezhian, Vamsee Vadlamudi, Rassel Raihan, Kenneth Reifsnider, Erick Reifsnider

UTARI Researcher Publications-Archive

In the era of the 4th industrial revolution of big data, Artificial Intelligence (AI) is widely used in each and every field of composite materials which includes design and analysis, material storage, manufacturing, non-destructive testing (NDT), Structural Health Monitoring (SHM) and Prognostics of its Remaining Useful Life (RUL), Material State (MS) and damage modes. While these AI models are rapidly developed and integrated into the Industrial Internet of Things (IIoT) to keep track of the health of a composite material from its birth to death, these integrations remain uncertain for prognostics without the certainty of its previous material state. This …

Removal Of Sb Impurities In Copper Electrolyte And Evaluation Of As And Fe Species In An Electrorefining Plant, Ana I. González De Las Torres, Michael S. Moats, Guillermo Ríos, Ana Rodríguez Almansa, Daniel Sánchez-Rodas

Materials Science and Engineering Faculty Research & Creative Works

Antimony and arsenic concentrations and their oxidation states (Sb(III), Sb(V), As(III) and As(V)) in copper electrorefining electrolyte can affect copper cathode quality through the formation of floating slimes. A laboratory-scale pilot plant was operated to remove Sb from commercial electrolyte. The pilot plant consisted of a pre-treatment process with copper shavings followed by ion exchange. The results indicated that Sb(III) was removed from copper electrolyte completely, while Sb(V) was partially eliminated. The concentrations of As(III) and As(V) were not affected, and the poisoning of the ion exchange resin by Fe(III) was avoided by pre-reduction to Fe(II) by copper shavings. The …

Fabricating Tinicu Ternary Shape Memory Alloy By Directed Energy Deposition Via Elemental Metal Powders, Yitao Chen, Xinchang Zhang, Mohammad Masud Parvez, Joseph William Newkirk, Frank W. Liou

Materials Science and Engineering Faculty Research & Creative Works

In this paper, a TiNiCu shape memory alloy single-wall structure was fabricated by the directed energy deposition technique with a mixture of elemental Ti, Ni, and Cu powders following the atomic percentage of Ti50Ni45Cu5 to fully utilize the material flexibility of the additive manufacturing process to develop ternary shape memory alloys. The chemical composition, phase, and material properties at multiple locations along the build direction were studied, using scanning electron microscopy, energy-dispersive X-ray spectroscopy, X-ray diffraction, Vickers hardness test-ing, tensile testing, and differential scanning calorimetry. The location-dependent compositions of martensitic TiNi and austenitic TiNi phases, mechanical properties, and functional properties …

Design And Fabrication Of Zinc Oxide Optofluidic Laser Elements, Kyle T. Bodily

Theses and Dissertations

This thesis systematically goes through the derivation, simulation, and experimentation of Zinc Oxide optofluidic micro laser elements. Single and coupled ring resonators were simulated to show single mode transmission as well as enhanced coupling capabilities when surrounded by high refractive index liquid. Devices with diameters ranging from 100-500 µm were successfully fabricated inexpensively through standard cleanroom procedures. The devices were tested using two different pump laser systems. Testing included such factors as high pump intensity, various angles of excitation, and low temperature. In all cases PL emission was observed and recorded.

Newly Developed Antifouling Coating Alloys For Hydraulic Cylinder Applications, Christopher Liam Fahey, Robin Ashley Payne

Materials Engineering

In a marine environment solid surfaces are subject to corrosion and fouling, which is the buildup of unwanted material such as algae and barnacles, that can impede the functionality of components. The application that this project focuses on are hydraulic cylinders. Eight alloys, including three newly developed alloys, were tested for marine fouling performance. Three of the alloys were primarily NiCr, these included Inconel 625, Metco 1720, and P105-X3. Four alloys contained varying amounts of Cu, and these were Monel 400, CuproNickel, Monel 450, and P76-X24. Finally, one sample of a Co-based alloy was also tested, Ultimet. Of the samples …

Life Cycle Assessment Of An Ifixit Pro Tech Toolkit, Camden N. Webb, Dylan A. Ell

Materials Engineering

A life cycle assessment of an iFixit Pro Tech Toolkit was performed to determine the environmental impacts of iFixit’s best-selling toolkit. SimaPro software was used to measure three impact categories: energy usage, water consumption, and global warming potential. This project provides quantitative data on the resources required for repairing devices through use of the toolkit to ultimately reduce the global e-waste stream by re-using electronics. Using the cut-off method, global warming potential of the kit was 4.1 kg of CO₂ equivalents, water consumption was 1.5 m³, and energy usage was 73.9 MJ. Major contributors to these impact …

Dental Cement Thickening Agents For Mudslide Prevention, Kristina Emiliya Babayev, Emily Elizabeth Johnson, Diana Evet Reihaneh

Materials Engineering

The purpose of this project is to develop a non-toxic mud thickening agent for the application of decreasing mudslide intensity where performance is measured by flow rate, viscosity, and toxicity tests. We hypothesized that dental cements could be a potential candidate due to their adhesive, hydrophilic, and biocompatible properties. Zinc phosphate, glass ionomer, and polycarboxylate cement were among the dental cements tested. These tests were performed at low and high concentrations of 25 grams and 125 grams, respectively, mixed into soil to produce 3500 gram samples. The dental cements produced noticeable thickening effects in the mud, as the average viscosity …

Effect Of Dissolved Oxygen On Corrosion Of Carbon And 13cr Steel In A Brine Environment, Kevin Peter Iu, Andy Zhou

Materials Engineering

Oxygen corrosion is a major threat to seawater injection systems that are part of offshore drilling operations. Seawater is typically deoxygenated to an industry standard of(DO) by injection through a deaeration column followed by treatment with oxygen scavenging chemicals. Commercial simulation software like OLI Studio: Corrosion Analyzer predicts high corrosion rates when injection seawater contains high DO levels, justifying deoxygenation. However, a notable lack of experimental data exists concerning the effect of varying levels of dissolved oxygen on corrosion rate. The goal of this project is to measure the effect of three dissolved oxygen levels (0, 62, and 620 ppb) …

Uv Polymerization Of A Zwitterionic Antifouling Membrane Coating, Amanda Jia-Hwa Tsai, Vincent Matthew Guarino

Materials Engineering

Membrane filtration is used in a wide array of industries to separate components in a mixture. Filtration membranes suffer from the external deposition of pollutants and microorganisms, a phenomenon known as fouling. Fouling reduces the lifetime of a membrane and therefore increases production costs. The goal of this project was to modify the surface of a hydrophobic commercial membrane with a charged coating to induce antifouling properties. A zwitterionic monomer, sulfobetaine methacrylate (SBMA), was used for its steric hindrance and hydration shell formation mechanisms, which result in superior non-specific antifouling performance. When polymerizing the coating onto the surface of the …

Effects Of Uv Exposure On The Thermo-Mechanical Properties Of Cactus Based Biopolymers, Madison Glozer, Megan Bolling, Addison Wolfson

Materials Engineering

The viability of renewable biopolymers as sustainable alternatives to synthetic plastics is promising, however ultra-violet (UV) radiation can lead to premature degradation and reduction in the material’s performance. Biopolymers comprised of nopal cactus juice, animal protein, natural wax, and glycerin in differing percentages were studied to obtain thermo-mechanical data in relation to UV exposure. To quantify degradation, dynamic mechanical analysis, thermogravimetric analysis, differential scanning calorimetry, infrared spectroscopy, goniometry and gravimetric measurements were performed. Each formulation experienced mass loss as a result of UV exposure, which could be attributed to water evaporation. The thermogravimetric analysis indicated a reduction in the second …

The Effects Of Glass Fiber Fillers On Epoxy Resin Performance, Ashton Robert Reinhold, Manuel Jose Aguirre Ii

Materials Engineering

Premature failure of filtration members in biochemical processing is a costly issue for manufacturers. This research aims to determine whether or not the premature failure due to thermal fatigue in medical filtration devices can be mitigated by glass fiber addition. The study was conducted to identify the effects of e-glass fiber filler content in an epoxy matrix on the mechanical and thermal properties of the epoxy system. The epoxy was evaluated over a filler content of 0-50wt% in level increments of 12.5wt% and temperatures ranging from ambient to 160°C in increments of 15°C. Cylindrical and tensile bar specimens were prepared …