Engineering Commons^™

Fatigue Damage Quantification And Life Estimation With Provision For Microstructure, Arash Pourbagheri Jirandehi

LSU Doctoral Dissertations

This dissertation provides methodologies for the quantification of different forms of fatigue damage by considering the role of microstructure. The laws of thermodynamics in conjunction with Finite Element Method (FEM) are utilized to devise thermodynamically-base frameworks for the estimation of cyclic damage in polycrystalline metals. Accordingly, a microstructure-sensitive platform for fatigue life estimation is introduced. The proposed framework is assessed for 3D printed metallic alloys at room and elevated temperatures. Further, it is used to analyze the fatigue performance difference between additively manufactured Inconel 718 in three print orientations. This research is of fundamental vital interest because it ensures that …

Investigation Of Immobilized Enzymes In Confined Environment Of Mesoporous Host Matrices, Xiaoliang Wang

USF Tampa Graduate Theses and Dissertations

Enzyme immobilization in metal-organic frameworks (MOFs) as a promising strategy, is attracting the interest of scientists from different disciplines with the expansion of MOF’s development. Different from other traditional host materials, their unique strengths of high surface areas, large yet adjustable pore sizes, functionalizable pore walls, and diverse architectures make MOFs an ideal platform to investigate hosted enzymes, which is critical to the industrial and commercial process. In addition to the protective function of MOFs, the extensive roles of MOFs in the enzyme immobilization are being well-explored by making full use of their remarkable properties like well-defined structure, high porosity, …

Ultra Low-Cycle Fatigue Behavior Comparison Between Additively Manufactured And Rolled 17-4 Ph (Aisi 630) Stainless Steels, David Gonzalez-Nino, Timothy Strasser, Gary S. Prinz

Civil Engineering Faculty Publications and Presentations

This study investigates the mechanical behavior of additively manufactured (AM) 17-4 PH (AISI 630) stainless steels and compares their behavior to traditionally produced wrought counterparts. The goal of this study is to understand the key parameters influencing AM 17-4 PH steel fatigue life under ULCF conditions and to develop simple predictive models for fatigue-life estimation in AM 17-4 steel components. In this study, both AM and traditionally produced (wrought) material samples are fatigue tested under fully reversed (R = −1) strain controlled (2–4% strain) loading and characterized using micro-hardness, x-ray diffraction, and fractography methods. Results indicate decreased fatigue life for …

Experimental Heat Transfer Investigations Of A Double Pipe U-Tube Heat Exchanger Equipped With Twisted Tape And Cut Twisted Tape Internals, Raj Kumar Nayak Maloth, Glen Cletus Dsouza, Swarna Mayee Patra

Mechanical and Materials Engineering Publications

For several decades, the use of heat exchangers for both heating and cooling applications has been established in industries ranging from process to space heating. Out of the various types of heat exchangers, U-tube heat exchangers are preferred owing to their abilities to handle larger flowrates and their simplicity in construction. U-tube exchangers are often equipped with innards of various forms which facilitate higher heat transfer rates and thermal efficiencies. Although higher heat transfer rates have been established with the addition of internals, there is a lack of coherence on the underlying complex physical phenomena such as heat transfer boundary …

Impact Of Exposure On Thin Epoxy Overlay Performance, Abul Fazal Mazumder

Dissertations

Thin epoxy overlays are used for improving the condition and extending the service life of bridge decks. The tensile bond pull-off strength, evaluated as per the ASTM C1583, is used as the performance indicator. A failure in the substrate with a tensile strength of 250 psi or greater is considered acceptable. However, the performance evaluated on in-service bridge decks shows inconsistent results. Laboratory studies by several researchers documented a distinct performance difference when the overlays are exposed to room temperatures in comparison to elevated temperatures. However, the most influential parameters such as concrete surface profile, thermal compatibility between overlay and …

Additive Manufacturing Of Miniaturized Peak Temperature Monitors For In-Pile Applications, Kiyo T. Fujimoto, Yaqiao Wu, David Estrada

Materials Science and Engineering Faculty Publications and Presentations

Passive monitoring techniques have been used for peak temperature measurements during irradiation tests by exploiting the melting point of well-characterized materials. Recent efforts to expand the capabilities of such peak temperature detection instrumentation include the development and testing of additively manufactured (AM) melt wires. In an effort to demonstrate and benchmark the performance and reliability of AM melt wires, we conducted a study to compare prototypical standard melt wires to an AM melt wire capsule, composed of printed aluminum, zinc, and tin melt wires. The lowest melting-point material used was Sn, with a melting point of approximately 230 °C, Zn …

Decarbonizing Rural Residential Buildings In Cold Climates: A Techno-Economic Analysis Of Heating Electrification, Filippo Padovani, Nelson Sommerfeldt, Francesca Longobardi, Joshua M. Pearce

Michigan Tech Publications, Part 1

Given the need for decarbonization of the heating sector and the acute need of a propane replacement in the U.S. Upper Midwest, this study quantifies the techno-economic characteristics of sustainable heating electrification in isolated rural, residential buildings in cold climates without natural gas supply. Archetypal buildings are modeled under four levels of electrification. At each electrification level, a parametric solar photovoltaic (PV) sizing analysis is performed and the total life cycle cost, renewable fraction and greenhouse gas (GHG) emissions are calculated based on the primary energy supply for each building type. Cost optimal solutions are stress-tested with multi-dimensional sensitivity analyses. …

Electrochemical Synthesis Of P-(Β-Hydroxyethyl Sulfone) Aniline, Hao Guo, Dong-Fang Niu, Shuo-Zhen Hu, Xin-Sheng Zhang

Journal of Electrochemistry

Para-ester is the most important intermediate for the preparation of ethylene sulfone type reactive dyes, which is usually used in the dyeing of cellulose fibers and synthetic fibers. P-(β-hydroxyethyl sulfone) aniline is an important intermediate for the synthesis of para-ester. In this paper, p-(β-hydroxyethyl sulfone) aniline was prepared by electrochemical method, having the advantages of simple process, mild reaction condition, less environmental pollution, easy reaction control and so on. It has strong development potential and industrial application prospect. The electrochemical reduction of p-nitrophenyl-β-hydroxyethyl sulfone on a lead plate electrode to prepare p-(β-hydroxyethyl …

Mathematical Expression And Quantitative Analysis Of Impedance Spectrum On The Interface Of Glassy Carbon Electrode, Lei Cheng, Pu-Xuan Yan, You-Jun Fan, Hua-Hong Zou, Hong Liang

Journal of Electrochemistry

Glassy carbon electrode (GCE) is a common basic electrode for various electrochemical sensors, and the detection properties are determined by its interfacial characteristics. In this paper, we established an equivalent circuit including electrolyte resistance (R_el), charge transport resistance (R_ct), diffusion impedance (R_di, C_di), electrochemical (oxidation/reduction) reaction impedance (R_R, C_R), surface adsorption impedance (R_ads , C_ads), double-layer capacitance (C_DL), and derived the mathematical expression for the equivalent circuit. The R_el and C_DL are contributed by inactive …

Fundamentals Of Electrochemical Impedance Spectroscopy For Macrohomogeneous Porous Electrodes, Xiang Li, Qiu-An Huang, Wei-Heng Li, Yu-Xuan Bai, Jia Wang, Yang Liu, Yu-Feng Zhao, Juan Wang, Jiu-Jun Zhang

Journal of Electrochemistry

Electrochemical impedance spectroscopy (EIS) can be used to diagnose charge transfer reactions and mass transport in porous electrodes. The charge transfer reactions include interfacial charge accumulation and charge conduction as well as electrochemical reaction. In this paper, the complex phasor method is developed under the macrohomogeneous assumption to build an impedance model of porous electrodes for clarifying several vague expressions in the traditional approaches. The following researches are carried out: (1) Identifying characteristic parameters for the porous electrodes, including electrode electronic conductivity σ₁, electrolyte ionic conductivity σ₂, interface charge transfer conductivity g_ct, unit area …

Janus-Tinbco2 For Hydrogen Evolution Reaction With High Conductivity And Catalytic Activity, Li-Li Xu, Dong-Yan Ren, Xiao-Feng Zhao, Yong Yi

Journal of Electrochemistry

Exploring the potential hydrogen evolution reaction (HER) catalysts with the high activity and high conductivity has always been a hot spot in the research of renewable energy development. Ti₂C, as one of the 2D-MXene, has excellent properties relating to many active sites, mechanical stability, conductivity, etc., and has become a potential HER catalyst. However, the modification of the surface of Ti₂C by terminal O will reduce the conductivity, thereby limiting the transport of electrons between the valence band and the conduction band. In this study, an electric double layer Janus-TiNbCO₂ was constructed by Nb doping. …

Application Of Ti/Ruo2-Iro2-Sno2-Sb2O5 Anode In Rural Drinking Water Disinfection, Jing-Ru Guo, Xue-Jiao Zhang, Shuai Liao, Xue-Ming Chen

Journal of Electrochemistry

Sodium hypochlorite disinfection has many advantages, including reliable operation, low cost, easily available raw materials. It is, therefore, suitable for disinfection of drinking water in remote rural areas. The service life and chlorine evolution efficiency of the anode are the main factors restricting the performance of the sodium hypochlorite generator. The special conditions of frequent shutdown and low electrolyte concentration in the rural drinking water application also put forward high requirements on the performance of the anode. In this study, Ti/RuO₂-IrO₂-SnO₂-Sb₂O₅,a new-type and efficient chlorine evolution anode, was prepared by …

Synthesis Of Nickel Phosphide/Nitrogen Phosphorus Co-Doped Carbon And Its Application In Lithium Ion Batteries, Jian Hu, Yan-Shuang Meng, Qian-Ru Hu

Journal of Electrochemistry

In recent years, the nickel-based phosphide has drawn great attention because of its low intercalation/deintercalation platform and lower polarization compared to sulfides and oxides as anodes for next-generation high-energy lithium-ion batteries. The Ni₂P anode can deliver high theoretical specific capacity of 542 mAh·g^-1, but it subject to a conversion reaction mechanism, which make them unsuitable for commercial applications. The agglomeration of Ni₂P nanoparticles during material fabrication and the structural deterioration of electrode associated with large volume change during charge-discharge process lead to poor cycle stability and low utilization of active materials. Meanwhile, the low …

Preparation Of Modified Titanium Based Pbo2 Electrode And Its Rapid Detection Of Cod, Qi Sun, Yan-He Han, Xiao-Lu Fu

Journal of Electrochemistry

In the traditional Ti/β-PbO₂ electrode, the crystal lattice difference between β-PbO₂ and Ti matrix is large, and the prepared electrode is easy to fall off and has a short service life. It needs to be modified in actual use. Based on the advantages of α-PbO₂ material and Ag material in terms of adhesion and conductivity, respectively, the above two materials are selected as the intermediate layer of Ti/β-PbO₂ electrode to improve electrode performance. In this paper, by preparing Ti/α/β-PbO₂ and Ti/Ag/β-PbO₂ electrodes …

Performance And Mechanism Of PtXCuY/C Electrocatalyst For Methanol Oxidation, Jia Tang, Xiao-Ming Zhang, Shan-Sheng Yu, Su-Li Wang, Gong-Quan Sun

Journal of Electrochemistry

Direct methanol fuel cell (DMFC), which directly converts the chemical energy of methanol fuel into electrical energy, has the advantages of high energy conversion efficiency, environmental friendliness, and abundance of fuel sources. DMFC is considered as the promising substitutes in the field of portable devices, military applications, and stationary power stations, while the broad application is severely hindered by the sluggish kinetic of methanol oxidation reaction (MOR) in the anode and the high cost of platinum (Pt)-based anodic electrocatalysts. Herein, a series of carbon supported Pt_xCu_y (Pt_xCu_y/C) binary metal electrocatalysts, featured with high …

Effect Of Alkyl Chain Length Of Symmetrical Quaternary Ammonium Hydroxide On Oxalic Acid Electroreduction Reaction, Bo Huang, Xin-Sheng Zhang, Dong-Fang Niu, Shuo-Zhen Hu

Journal of Electrochemistry

Glyoxylic acid with the dual characteristics of acid and aldehyde is an important chemical raw material and organic synthesis intermediate, which is extensively used in the perfumery, pharmaceutical and fine chemical industries. A family of symmetric quaternary ammonium hydroxides (QAHs) with different alkyl chain lengths was used as the additives in generating glyoxylic acid from oxalic acid electroreduction reaction (OAER). The effects of alkyl chain length on OAER and the corresponding side reaction, i.e., hydrogen evolution reaction (HER), were investigated. Linear sweep voltammetric (LSV) results showed that the adsorption of the additives suppressed more on the HER than that on …

Pair Distribution Function Analysis And Electrochemical Performance Of Mesoporous Carbon Nanomaterials Synthesized Through Koh And Zncl2 Activation, Talam E. Kibona, Sarah Frisco, Maxwell W. Terban

Tanzania Journal of Science

Mesoporous carbon has been synthesized by activating carbonized biogas slurry residues with ZnCl2 and KOH simultaneously. The carbon to activating agent mass ratios were kept at 1:4, while the ZnCl2 to KOH mass ratio varied from 4:0, 3:1, 2:2, 1:3, to 0:4. The highest BET specific surface area of 361 m2 g-1, micropore surface area of 231 m2 g‒1, mesopore surface area of 125 m2 g‒1, and total pore volume of 0.23 cm3 g‒1 which amounted to 78% mesopore content, were obtained for the sample with 3:1 ZnCl2 to KOH mass ratio. Scanning electron microscope (SEM) images were acquired to …

Advances In Nanomaterials Sciences And Nanotechnology For Sustainable Development: A Review, Gervas E. Assey, Wilhelm S. Malasi

Tanzania Journal of Science

The fields of materials sciences have great opportunities to address the challenges of sustainable development of modern societies. The sub-disciplines of materials sciences of interest in this review are nanomaterials sciences and nanotechnology. Nanomaterials possess one external dimension measuring 1-100 nm. They have larger surface area for the same mass than their bulk materials. They are more reactive with effects on their electrical, optical and magnetic properties. Thus, nanomaterials are promising for sustainable development in the areas of energy, water, chemicals, electronics, medical and pharmaceutical industries, CO2 mitigation and agriculture. To this end, this review explores the advances in nanomaterials …

Multi-Material Hybrid Additive And Subtractive Manufacturing Of Photonic Devices, Roger Brandon Tipton

USF Tampa Graduate Theses and Dissertations

Optoelectronics focuses on the application of electronic devices that utilize forms of electromagnetic radiation including visible light and other wavelengths including ultraviolet and infrared. Optoelectronics typically include devices that emit light and detect light. Devices created using this technology include light-emitting diodes, laser diodes, photoresistors, photodiodes, solar cells, phototransistors, and fiber optics. Fiber optic interconnects are interesting devices in that they are used in conjunction with optoelectronic devices to transmit information between individual optoelectronic components.

Optoelectronics are typically produced by traditional lithography methods including etching, writing, and printing on rigid silicon substrates for fabricating devices. Other techniques like glass or …

Design Of Acoustic Wave Sensor System For Detection Of Btex In Gas Phase, Veselinka Mitevska

USF Tampa Graduate Theses and Dissertations

Benzene, toluene, ethylbenzene, and xylene are classified as volatile organic compounds (VOC), which if present at higher concentrations can cause acute and/or chronic health effects. To protect people from VOCs, the occupational safety and health agency (OSHA) established short term and eight-hour workday exposure limits. The short time levels of exposure for BTEX materials are 5 ppm, 150 ppm, 125 ppm, and 150 ppm, for benzene, toluene, ethylbenzene, and xylene respectively. The eight-hour workday exposure for these same materials are 1 ppm for benzene, 200 ppm for toluene, 100 ppm for ethylbenzene and 100 ppm for xylene. Although there are …

Polyethyleneimine-Based High Yield Fluorescent Soluble Covalent Organic Framework, Haonan Wang

USF Tampa Graduate Theses and Dissertations

In this thesis, we report a novel covalent organic framework (COF) with fluorescence and water-soluble features, F-COF-PT with high gravimetric yield (~ 89%), that was generated by the reactions of branched polyethyleneimine (PEI) and 1,3,6,8-Tetrabromopyrene (TBP). The surface area and pore volume were about up to 63.2 m2/g and 0.41 m3/g. The prepared COFs maintained the TBP fluorescent performance in water solutions at 440-460 nm. Furthermore, Cu(II) ion solution would impact the quenching activity with F-COF-PT3, and NaOH treated F-COF-PT3 has the 5.6 m2/g capacity of uptake CO2. Finally, the zeta potential and particle diameter of original and treated F-COF-PT3s …

Plasma Treatment Of High-Density Polyethylene, Linear Low-Density Polyethylene, And Polyvinyl Chloride Geomembranes By Air And Oxygen, Merve Koca Uyar

USF Tampa Graduate Theses and Dissertations

High-density polyethylene (HDPE), linear low-density polyethylene (LLDPE), and polyvinyl chloride (PVC) geomembranes were treated with air and oxygen plasma. The purpose of air and oxygen plasma treatment of geomembrane surface is to increase the surface wettability of these materials, thereby increasing adhesive properties. Increasing adhesive properties enables a surface to be coated with a desired material with antibacterial, antioxidant, and UV resistant characteristics, without changing bulk material properties. To protect the geomembranes from oxidation degradation, UV degradation and biological degradation, it is important to increase the antibacterial, antioxidant, and UV resistant properties of geomembrane. Before and after the plasma treatments …

Optimization In The Application Of Varnishes Barrier On Cartonboard Packaging, Andre Ramalheiro De Andrade, Maria Isabel Rodrigues Phd, Eduardo Luiz Machado Phd

Journal of Applied Packaging Research

In this work adjustments in the rotogravure printing process are proposed to the varnish water vapor transmission rate (WVTR) aiming to obtain results smaller than 20g/m²/24h. One case study was used for the propositions for improvements, where focused on varnish application process in a gravure printer for an eight-printing unit cartonboard packaging, maximum printing speed of 175 m/min and a 285 g/m² weight cartonboard. The possible variables that influenced the WVTR result were selected from the technical expertise of the people involved in the project, the analysis in the printing process with the application of directed trials using experimental designs …

Method Of Making Temperature-Immune Self-Referencing Fabry–Pérot Cavity Sensors, Hengky Chandrahalim, Jonathan W. Smith

AFIT Patents

A method of making passive microscopic Fabry-Pérot Interferometer (FPI) sensor includes forming a three-dimensional microscopic optical structure on a cleaved tip of an optical fiber that reflects a light signal back through the optical fiber. The reflected light is altered by refractive index changes in the three-dimensional structure that is subject to at least one of: (i) thermal radiation; and (ii) volatile organic compounds.

Material And Topographically Optimized Thermal Dissipation For High-Performance Electronic Devices Utilizing Vapor Chambers, Derek Joseph Daniels

USF Tampa Graduate Theses and Dissertations

Advances in materials science and engineering in the field of thermal transport and dissipation enable the use of higher-performance electronic devices that are smaller and generate more heat. Phase change thermal transport systems such as heat pipes and vapor chambers enable passive dissipation from devices that generate excessive heat without the need for actively pumped cooling systems. Properly designed vapor chamber enabled systems easily exceed the thermal conductivity of manufactured diamond at a small fraction of the cost.[1][2][3] While heat pipe phase change systems are generally one-dimensional with a limited cross section, vapor chambers are generally two-dimensional with a small …

Texturing In Bi2Te3 Alloy Thermoelectric Materials: An Applied Physics Investigation, Oluwagbemiga P. Ojo

USF Tampa Graduate Theses and Dissertations

Thermoelectric devices provide the means for direct conversion between heat and electricity. The device conversion efficiency, or performance, is directly related to the thermoelectric figure of merit, ZT, of the working materials. Bismuth telluride alloys are the materials currently in use in most thermoelectric devices for near room temperature solid-state refrigeration and power conversion applications. The vast majority of publications in the literature on thermoelectricity report on investigations towards developing new materials with enhanced thermoelectric properties, however Bi₂Te₃ alloys have been used in thermoelectric devices for decades.

In this thesis, an investigation of crystallographic texturing on large …

Research And Applications Of Artificial Neural Network In Pavement Engineering: A State-Of-The-Art Review, Xu Yang, Jinchao Guan, Ling Ding, Zhanping You, Vincent C.S. Lee, Mohd Rosli Mohd Hasan, Xiaoyun Cheng

Michigan Tech Publications, Part 1

Given the great advancements in soft computing and data science, artificial neural network (ANN) has been explored and applied to handle complicated problems in the field of pavement engineering. This study conducted a state-of-the-art review for surveying the recent progress of ANN application at different stages of pavement engineering, including pavement design, construction, inspection and monitoring, and maintenance. This study focused on the papers published over the last three decades, especially the studies conducted since 2013. Through literature retrieval, a total of 683 papers in this field were identified, among which 143 papers were selected for an in-depth review. The …

Synergistic Anticancer Response Of Curcumin And Piperine Loaded Lignin-G-P (Nipam-Co-Dmaema) Gold Nanogels Against Glioblastoma Multiforme, Xinyi Zhao, Bilal Javad, Daxing Cui, James Curtin, Furong Tian

Articles

Glioblastoma multiforme (GBM) is the most aggressive and commonly diag- 11 nosed brain cancer and presents a strong resistance to routine chemotherapeutic drugs. 12 The present study involves the synthesis of Lignin-g- p (NIPAM-co-DMAEMA) gold 13 nanogel, loaded with curcumin and piperine to treat GBM. The application has three 14 functions: (1) overcome the limitations of biodistribution, (2) enhance the toxicity of an- 15 ticancer drugs against GBM, (3) identify the uptake pathway. Atom transfer radical 16 polymerization was used to synthesize the Lignin-g-PNIPAM network, crosslinked with 17 the gold nanoparticles (GNPs) to self-assemble into nanogels. The size distribution and …

Customizable Aptamer Transducer Network Designed For Feed-Forward Coupling, Tim Hachigian, Drew Lysne, Elton Graugnard, Jeunghoon Lee

Materials Science and Engineering Faculty Publications and Presentations

Solution-based biosensors that utilize aptamers have been engineered in a variety of formats to detect a range of analytes for both medical and environmental applications. However, since aptamers have fixed base sequences, incorporation of aptamers into DNA strand displacement networks for feed-forward signal amplification and processing requires significant redesign of downstream DNA reaction networks. We designed a novel aptamer transduction network that releases customizable output domains, which can then be used to initiate downstream strand displacement reaction networks without any sequence redesign of the downstream reaction networks. In our aptamer transducer (AT), aptamer input domains are independent of output domains …

Chitosan Graphene Composite Fabrication And Characterization For Treatment Of Harmful Algal Blooms And Toxins, Sarah Zetterholm

Master's Theses

Chitosan graphene composites were fabricated and characterized as a management strategy for harmful algal blooms (HABs) caused by various species of cyanobacteria. These chitosan graphene materials were compared to previously studied chitosan graphene-oxide composites in both material properties and HAB treatment. In previous studies, adsorption of the cyanobacteria onto the surface of the composite materials has been observed. Investigations of the pure materials for these composites are also included in this study to determine whether removal is a result of charge interactions with the composite, or as an inherent property of the graphene or graphene oxide. Initial results suggest that …