Engineering Commons^™

Rational Design Of Electrochemical Molecular Probes For Highly Selective And Long-Term Measurement In Vivo, Yue Wang, Li-Min Zhang, Yang Tian

Journal of Electrochemistry

Designing electrochemical interfaces for in vivo analysis of neurochemicals with high selectivity and long-term stability is vital for monitoring dynamic variation and dissecting the complex mechanisms of pathogenesis in living animals. This review focuses on the development of electrochemical interfaces based on rational design of molecular probes for in vivo measurement with high selectivity and high stability from three aspects: (1) Specific recognition probes were rationally designed and created to remarkably improve the selectivity of in vivo analysis in a complicated brain environment. (2) The Au-C≡C functionalized surface was developed to remarkably enhance the stability of molecular assembly, and employed …

An Additive Incorporated Non-Nucleophilic Electrolyte For Stable Magnesium Ion Batteries, Mao-Ling Xie, Jun Wang, Chen-Ji Hu, Lei Zheng, Hua-Bin Kong, Yan-Bin Shen, Hong-Wei Chen, Li-Wei Chen

Journal of Electrochemistry

Non-nucleophilic electrolytes are promising next-generation highly stable electrolytes for magnesium-ion batteries (MIBs). However, a passivation layer on Mg metal anode usually blocks Mg²⁺ diffusion, leading to poor reaction kinetics and low Coulombic efficiency of the Mg plating/stripping in these electrolytes. Here we explore the utilization of phenyl disulfide (PDF) as a film-forming additive for non-nucleophilic electrolytes to regulate the interfacial chemistry on Mg metal anode. Phenyl-thiolate generated from the PDF additive was found to suppress the unfavorable surface blocking layer, resulted in a high Coulombic efficiency of up to 99.5% for the Mg plating/stripping process as well as a …

Synchrotron X-Rays Characterizations Of Metal-Air Batteries, Ya-Jie Song, Xue Sun, Li-Ping Ren, Lei Zhao, Fan-Peng Kong, Jia-Jun Wang

Journal of Electrochemistry

The rapid development of electric vehicles urgently requires high-energy-density batteries. Recently, metal-air batteries have attracted much attention in industry and academia for their ultra-high theoretical energy densities. However, the practical application of metal-air batteries is severely impeded by multiple drawbacks, including severe side reactions, low energy efficiency, and limited cycle life. Understanding the reaction mechanism of the cell and further developing effective strategies are beneficial for the practical application of metal-air batteries. In the past decade, advanced characterization techniques have accelerated the development of metal-air batteries. In particular, synchrotron radiation-based characterization techniques have been widely applied to the mechanistic study …

Tuning Electrochemical Interactions And Polymer Electrolyte Interfaces For Enhanced Organic Acid Separations Using Electrodeionization, Matthew Leo Jordan

LSU Doctoral Dissertations

Chemical separations are critical processes for chemical and industrial plants to purify and isolate products however current separation technologies, such as distillation, rely on energy intensive processes. Electrochemical separation processes, such as electrodialysis and electrodeionization, are an energy efficient alternative that are emerging as an alternative for thermal-based separations. Organic acids are weakly ionizable species and susceptible for purification from process streams using electrochemical processes. Recently the fermentation route has garnered greater attention as a means for producing value-added chemicals, such as organic acids, from a renewable feedstock and aiding the circular economy. Some of the challenges electrodialysis faces for …

Discussion Of Materials Science Development Trend Through Climate Change, Manufacturing Update, National Security And Materials Genome Initiative, Weijian Lin, Bowen Zhang, Weihua Wang

Bulletin of Chinese Academy of Sciences (Chinese Version)

New materials are considered as the foreguide and the base of the revolution of advanced technology. Its development and trend of new materials greatly influences the human life and society development. Nowadays, the risk of climate change is increasing day by day, the pressure of manufacturing update of new technology revolution is bigger than ever, the competition and the friction between countries become more and more intense, and the iteration of advanced materials turns to a rigid demand. In this work, we analyze and predict the development tread of material from the aspects of climate change, manufacturing update, national security, …

Development Strategy Of China’S Advanced Material Industry Cluster, Kun Zeng, Xiaopeng Li, Ziyun Shen, Fan Liao, Jinsong Xiao, Qingli Huang

Bulletin of Chinese Academy of Sciences (Chinese Version)

The advanced material industry is a basic and strategic industry of the national economy, as well as the key area of global competition in technology industry. Under the dual-cycle development pattern, propelling the cluster development of advanced material industry has become a key to raise the level of the advanced material industry development. This article described the spatial distribution of the advanced material industry cluster in China, analyzed the characteristics and development stage of the advanced material industrial cluster, and compared the gap between the advanced material industry cluster in China and the world-class advanced manufacturing industry cluster. In addition, …

Development And Implication Of Amorphous Alloys, Weihua Wang

Bulletin of Chinese Academy of Sciences (Chinese Version)

The development of metallic materials is closely correlated to the civilization of human being. Amorphous alloys with long-range disordered atomic microstructure, unique physical and mechanical properties, are advanced and novel metallic materials which have diverse industrial applications. Recently, the scientific research, new system development, and industry applications of the structural disordered alloys such as amorphous alloys and high entropy alloy are fast developing, and have significant influence on fields such as the desgin and development of metallic materials, structural materials, green materials, magnetic materials, catalytic materials, and information materials. In this article, we review the history, the development trends, the …

Development And Thinking Of Silicon Photonics Heterogenous Integration, Zihao Wang, Ting Wang, Jianjun Zhang

Bulletin of Chinese Academy of Sciences (Chinese Version)

Integrated photonics are fast-developing research field for next generation information technology. Current silicon photonic integrated chips strongly benefit from low-cost and high-density integration properties of existing CMOS technology. But limited by the physical properties of silicon, it is not a perfect material for different types of optoelectronic devices, such as laser sources, modulators, and infrared detectors. Therefore, heterogeneous integration is proposed by combining the advantages of CMOS process and superior opto-electric properties of heterogenous material systems, that can be an essential step towards next generation integrated optoelectronic chips. Here, this paper introduces the rapid progress of integrated photonics nationally and …

Two-Dimensional Materials: From Fundamental To Application, Guangyu Zhang, Geng Long, Shenghuang Lin, Lede Xian, Yan Jiang, Hao Wu, Shuopei Wang, Na Li

Bulletin of Chinese Academy of Sciences (Chinese Version)

The rapid development of the information society puts forward an ever-increasing urgent need for information storage, processing, and transmission capabilities. With the ending of Moore's Law, the semiconductor industry urgently needs to find new solutions. Lowdimensional materials are considered to be a new breakthrough in the semiconductor industry in the post-Moore era, because of the size characteristics of atomic-level thickness, the structural advantage of no dangling bonds on the surface, and the sensitivity to electrical and optical control methods caused by a large specific surface area. Songshan Lake Materials Laboratory has introduced a group of top scientists and established a …

Development Strategies Of New Energy Materials For Carbon Peak And Neutrality—Case Study Of Songshan Lake Materials Laboratory, Ximei Qiu, Yan Wang, Haiming Lyu, Jian Xu, Yida Wu, Xiaowei Ma, Chunyi Zhi, Xiaolong Du, Xuejie Huang

Bulletin of Chinese Academy of Sciences (Chinese Version)

Transformative energy technologies will provide strong strategic support to the realization of peaking carbon dioxide emissions before 2030, and achieving net zero carbon emissions before 2060. Reducing the dependence on fossil fuels by saving energy and reducing emissions from the source is essential to achieve the double-carbon target as soon as possible. Songshan Lake Materials Laboratory is working on key materials to develop solar-battery power systems and electrification of transportation energy to return coal, oil, and natural gas from fuels to materials. This study focuses on introducing the research team of its New Energy Materials and Devices R&D Center with …

Is There Any Role Of Reduction Mammoplasty In Decreasing Breast Cancer Risk In Gigantomastia?, Fatma Nilay Tutak, Fatih Dogan

Materials Science and Engineering Faculty Research & Creative Works

Aim: Large breasts create psychological and physical problems in women, all of whom must also keep in mind the common problem of breast cancer. In the present study we examine the effect of breast reduction surgery on breast cancer risk. Materials and Methods: Our retrospective study is based on the records (between June 1, 2014, and June 30, 2019) of patients who underwent breast reduction surgery in the Plastic, Reconstructive and Aesthetical Surgery clinic of a training and research hospital. Statistical analyses were conducted using IBM SPSS Statistics (Version 25.0. Armonk, NY:IBMCorp.). Normal distribution of the data was analyzed with …

Development Of Cost-Effective High-Modulus Asphalt Concrete (Hmac) Mixtures Using Crumb Rubber And Local Construction Materials In Louisiana., Ibrahim A.I.E Elnaml

LSU Master's Theses

One of the emerging solutions to enhance the durability of asphalt pavements is the use of a French asphalt mix known as “High-Modulus Asphalt Concrete (HMAC).” This mix uses a hard asphalt binder, high binder content (about 6%), and low air voids content as compared to Superpave mixtures. The key objective of this study was to develop a cost-effective HMAC mixture using crumb rubber and local materials in Louisiana. To achieve this objective, four HMAC mixtures were prepared using two asphalt binders (PG 82-22 and PG 76-22 plus 10% crumb rubber) and two Reclaimed Asphalt Pavement (RAP) contents (20% and …

Ultrahigh Piezoelectric Performance Through Synergistic Compositional And Microstructural Engineering, Yongke Yan, L. D. Geng, Li Feng Zhu, Haoyang Leng, Xiaotian Li, Hairui Liu, Dabin Lin, Ke Wang, Yu Wang, Shashank Priya

Michigan Tech Publications, Part 1

Piezoelectric materials enable the conversion of mechanical energy into electrical energy and vice-versa. Ultrahigh piezoelectricity has been only observed in single crystals. Realization of piezoelectric ceramics with longitudinal piezoelectric constant (d33) close to 2000 pC N–1, which combines single crystal-like high properties and ceramic-like cost effectiveness, large-scale manufacturing, and machinability will be a milestone in advancement of piezoelectric ceramic materials. Here, guided by phenomenological models and phase-field simulations that provide conditions for flattening the energy landscape of polarization, a synergistic design strategy is demonstrated that exploits compositionally driven local structural heterogeneity and microstructural grain orientation/texturing to provide record piezoelectricity in …

Computational Study Of The Reactions Of Heteroatomic Compounds On Ceo2, Suman Bhasker Ranganath

LSU Doctoral Dissertations

The mechanisms of ambient-temperature reactions of heteroatomic compounds catalyzed by ceria (CeO₂), an archetypical reducible oxide, for enzyme mimetics, environmental protection, and chemical synthesis are investigated in this dissertation using theoretical methods. CeO₂ is modeled with thermodynamically stable low-index surfaces exposed by commonly studied ceria thin films and nano particles. To understand phosphatase-like dephosphorylation activity, stable adsorption states and surface reactions of model phosphates are examined. Binding of the central P-atom to surface lattice oxygen (O_latt) supplemented by phosphoryl O-Ce interaction is the only stable adsorption state for the un-dissociated molecule. Deprotonation of phosphate monoesters, …

Thermomechanics Of Semiconducting Polymers And Their Morphological Phenomena, Luke Galuska

Dissertations

In contrast to conventional silicon-based electronics, semiconducting polymers show great promise for emerging applications in soft, flexible, and ductile electronic technologies. This is due to their polymeric nature, tailorable structure, and sub-100 nm device thickness. Despite this mechanical novelty, there remains a poor understanding of their structure-property-processing relationships, which has hindered growth within the field. This dissertation elucidates these relationships through investigation of their thermomechanics, and morphological phenomena. This was accomplished through the following projects:

1) To demonstrate the impact of backbone rigidity on semiconducting polymer thermomechanics, we varied the backbone rigidity of an NDI-based polymer by inserting flexible methylene …

Polarization-Sensitive Optical Responses From Natural Layered Hydrated Sodium Sulfosalt Gerstleyite, Ravi P. N. Tripathi, Xiaodong Yang, Jie Gao

Mechanical and Aerospace Engineering Faculty Research & Creative Works

Multi-element layered materials have gained substantial attention in the context of achieving the customized light-matter interactions at subwavelength scale via stoichiometric engineering, which is crucial for the realization of miniaturized polarization-sensitive optoelectronic and nanophotonic devices. Herein, naturally occurring hydrated sodium sulfosalt gerstleyite is introduced as one new multi-element van der Waals (vdW) layered material. The mechanically exfoliated thin gerstleyite flakes are demonstrated to exhibit polarization-sensitive anisotropic linear and nonlinear optical responses including angle-resolved Raman scattering, anomalous wavelength-dependent linear dichroism transition, birefringence effect, and polarization-dependent third-harmonic generation (THG). Furthermore, the third-order nonlinear susceptibility of gerstleyite crystal is estimated by the probed …

Optimization Of A Novel Nipam-Based Thermoresponsive Copolymer For Intramuscular Injection As A Myoblast Delivery Vehicle To Combat Peripheral Artery Occlusive Disease, Quentin R. Klueter

Master's Theses

There is a need for a minimally invasive delivery method to enable cell therapies to combat peripheral artery occlusive disease (PAOD) in end stage patients. Myoblasts show promise as a cell mediated therapy but warrant an improved delivery method to increase cell retention in the region of interest because of their adherent nature, relative to previously used BM-MNC’s that are non-adherent. Contemporary issues with achieving successful cell therapies of vasculature can be mainly characterized by the lack of clinical translation from promising animal studies and absence of cell delivery scaffolding. Naturally, polymers have been widely experimented with as grafts to …

Predicting The Near Field Underwater Explosion Response Of Coated Composite Cylinders Using Multiscale Simulations, Experiments, And Machine Learning, Sumeru Nayak, Gideon A. Lyngdoh, Arun Shukla, Sumanta Das

Faculty Publications - Biomedical, Mechanical, and Civil Engineering

Prediction of underwater explosion response of coated composite cylinders using machine learning (ML) requires a large, consistent, accurate, and representative dataset. However, such reliable large experimental dataset is not

readily available. Besides, the ML algorithms need to abide by the fundamental laws of physics to avoid non- physical predictions. To address these challenges, this paper synergistically integrates ML with high- throughput multiscale finite element (FE) simulations to predict the response of coated composite cylinders

subjected to nearfield underwater explosion. The simulated responses from the multiscale approach correlate very well with the experimental observations. After validation of the multiscale approach, a …

Advances In Mechanical Metamaterials For Vibration Isolation: A Review, Mohammed Al Rifaie, Hasanain Abdulhadi, Ahsan Mian

Mechanical and Materials Engineering Faculty Publications

The adverse effect of mechanical vibration is inevitable and can be observed in machine components either on the long- or short-term of machine life-span based on the severity of oscillation. This in turn motivates researchers to find solutions to the vibration and its harmful influences through developing and creating isolation structures. The isolation is of high importance in reducing and controlling the high-amplitude vibration. Over the years, porous materials have been explored for vibration damping and isolation. Due to the closed feature and the non-uniformity in the structure, the porous materials fail to predict the vibration energy absorption and the …

Investigation Of Mechanical Properties Of Parts Fabricated With Gas- And Water-Atomized 304l Stainless Steel Powder In The Laser Powder Bed Fusion Process, M. Hossein Sehhat, Austin T. Sutton, Chia Hung Hung, Joseph William Newkirk, Ming-Chuan Leu

Materials Science and Engineering Faculty Research & Creative Works

The use of gas-atomized powder as the feedstock material for the laser powder bed fusion (LPBF) process is common in the additive manufacturing (AM) community. Although gas-atomization produces powder with high sphericity, its relatively expensive production cost is a downside for application in AM processes. Water atomization of powder may overcome this limitation due to its low-cost relative to the gas-atomization process. In this work, gas- and water-atomized 304L stainless steel powders were morphologically characterized through scanning electron microscopy (SEM). The water-atomized powder had a wider particle size distribution and exhibited less sphericity. Measuring powder flowability using the Revolution Powder …

4,6-O-Phenylethylidene Acetal Protected D-Glucosamine Carbamate-Based Gelators And Their Applications For Multi-Component Gels, Pooja Sharma, Guijun Wang

Chemistry & Biochemistry Faculty Publications

The self-assembly of carbohydrate-based low molecular weight gelators has led to useful advanced soft materials. The interactions of the gelators with various cations and anions are important in creating novel molecular architectures and expanding the scope of the small molecular gelators. In this study, a series of thirteen new C-2 carbamates of the 4,6-O-phenylethylidene acetalprotected D-glucosamine derivatives has been synthesized and characterized. These compounds are rationally designed from a common sugar template. All carbamates synthesized were found to be efficient gelators and three compounds are also hydrogelators. The resulting gels were characterized using optical microscopy, atomic force microscopy, …

Potential Solution To Meet Growing Demands Of Refractory Metal: Selective Laser Melting Of Molybdenum-Tungsten Alloy, Jae Yu

Theses and Dissertations

Selective laser melting (SLM) of refractory metals has been of high interest in research due to the metals’ potential desirable characteristics in aeronautical and space applications. In particular, molybdenum and tungsten have been the focus of several studies in the search for high temperature and high strength purposes in applications like supersonic aircraft, re-entry vehicles, nuclear fission, power generation, and other space systems. However, there is still a significant knowledge gap to process defect-free alloys and making use of them in practical engineering functions. The aim of this study is to characterize the relationship between the microstructure and mechanical properties …

Towards The Integration Of Ferroelectric Negative Capacitance With Gallium Oxide Semiconductors For High Power Applications, Guillermo A. Salcedo

Theses and Dissertations

Gallium oxide is a relatively new semiconductor material with characteristics auspicious for high frequency and high-voltage applications. Although several research groups have already demonstrated radio-frequency (RF) devices on Ga₂O₃ with remarkable features, there is still room for improvement. For instance, the operating frequency of RF field-effect transistors (FET) decreases with the parasitic capacitance, which can be counteracted by higher gate capacitance. Implementing ferroelectric dielectrics with suitable parameters in Ga₂O₃ FET promises to enhance the gate capacitance and therefore increase operating frequency. This work investigated the effect of various factors (film composition, film thickness, TiN …

Thermal Considerations For Film Cooling Materials With Anisotropic Thermal Conductivity, Carol E. Bryant

Theses and Dissertations

Higher performance requirements and reduced core sizes are driving increases in turbine inlet temperature in gas turbine engines, surpassing the melting point of advanced materials. Newer materials, such as composites, are being introduced into the hot sections of gas turbine engines. Components in the hot section use film cooling to prevent melting. One unique aspect of some high-temperature composites is they have a bulk anisotropic thermal conductivity, therefore heat flow differs relative to traditional metallic components. Film cooling designs can be revolutionized by leveraging anisotropy in high-temperature materials. The purpose of this research is to examine thermal considerations for using …

Determination Of Nonlinear Optical Properties For Gallium Arsenide Phosphide Ternary Compounds And For Tin Thiohypodiphosphate, Peter F. Norris

Theses and Dissertations

The Department of Defense and the commercial sector rely on coherent light sources to emit light that transmits through the atmosphere. Nonlinear optical effects in crystalline materials can be used to generate the laser waves, but certain nonlinear effects negatively impact the performance of laser generating materials. This thesis focuses on characterizing nonlinear optical properties for gallium arsenide phosphide ternary compounds and for tin thiohypodiphosphate. The Maker Fringe experiment is used to determine the d-coefficients of the materials, which describe the magnitude of the nonlinear response of the material. The Z-Scan experiment is used to calculate the nonlinear refractive …

Manufacturing Of A Ceramic Turbine Rotor For A Compact Jet Engine, Bryan T. Leicht

Theses and Dissertations

The primary goal of this study was to develop a low-cost, timely, scalable manufacturing method that produced a ceramic turbine that can be tested as a drop-in replacement on a JetCat P400 small scale gas turbine engine. This research compared two processes for manufacturing a ceramic turbine utilizing a pour casting method and 3D printing using stereolithography ceramic manufacturing (SLCM). The pour casting method used Silicon Nitride to create a cast turbine using a sacrificial 3D printed mold. The SLCM method evaluated producing an alumina turbine using an ADMATEC Admaflex 300 SLCM printer to directly print a ceramic turbine. This …

Analysis Of Microscopic Carbon Fiber Fragments, Zachary R. Scott

Theses and Dissertations

Carbon Fiber (CF) has different tensile strengths and transverse moduli depending on how they are fabricated. Some CF is export controlled as it can be used for weapons, spacecraft, or gas centrifuges for enriching nuclear fuel. This research project explored a new way to prepare micron sized single CF threads to measure their transverse modulus and compare the moduli of non-export controlled CF to that of an export controlled CF. Five total polyacrylonitrile (PAN) fibers were used in this project, one of which was an export controlled fiber.

Formulation And Characterization Of Fast-Curing Plastic Scintillators With High-Z Loading, Theodore W. Stephens

Theses and Dissertations

Development of novel fast-curing plastic scintillators is highly advantageous due to their potential to be manufactured via 3D printing. Several formulations were developed that exhibit enhanced photon sensitivity, producing modest but discernible photopeaks at an incident gamma energy of 122 keV. The photon sensitivity is achieved via bismuth high-Z loading; however, this practice typically results in diminished light yields. Subsequent formulations, which varied the photoinitiator concentration and curing time, demonstrated successful curing with sufficient plastic hardness, reduced purple discoloration, reduced heat buildup during curing, and resulted in less cracking during the curing process, all of which were correlated with lower …

Facet Dependent Oxygen Evolution Activity Of Spinel Cobalt Oxides, Li-Hua Zhang, Hong-Yuan Chuai, Hai Liu, Qun Fan, Si-Yu Kuang, Sheng Zhang, Xin-Bin Ma

Journal of Electrochemistry

Water splitting is a promising technology to produce clean hydrogen if powered by renewable energies, where oxygen evolution is the rate determining step at an anode. Here we adjust the different crystal planes of the cobalt oxides catalyst to expose more effective active sites through a hydrothermal process, so as to improve the reaction activity for oxygen evolution. The samples were well characterized by TEM, SEM and XRD. Among the three synthetic crystal planes (100), (111) and (110) of spinel cobalt oxides, the (100) crystal plane has the highest intrinsic activity. Combining in-situ infrared and DFT calculations, we …

Structural Degradation Of Ni-Rich Layered Oxide Cathode For Li-Ion Batteries, Jia-Yi Wang, Sheng-Nan Guo, Xin Wang, Lin Gu, Dong Su

Journal of Electrochemistry

Nickel(Ni)-rich layered oxide has been regarded as one of the most important cathode materials for the lithium-ion batteries because of its low cost and high energy density. However, the concerns in safety and durability of this compound are still challenging for its further development. On this account, the in-depth understanding in the structural factors determining its capacity attenuation is essential. In this review, we summarize the recent advances on the degradation mechanisms of Ni-rich layered oxide cathode. Progresses in the structure evolution of Ni-rich oxide are carefully combed in terms of inner evolution, surface evolution, and the property under thermal …