Engineering Commons^™

Dynamic Rbi With Central Difference Method Approach In Calculation Of Uniform Corrosion Rate: A Casestudy On Gas Pipelines, M.Riefqi Dwi Alviansyah, Fernanda Hartoyo, Zahra Nadia Nurullia, Ari Kurniawan

Journal of Materials Exploration and Findings

The oil and gas industry generally uses a piping system to drain fluids. Even though the pipes used have been well designed, the use of pipes as a means of fluid transportation still provides the possibility of failure that can occur at any time, one of which is due to uniform corrosion. The use of standard Risk Based Inspection (RBI) according to the API RBI 581 document has been widely used to anticipate potential failures to pipe components. The use of standard RBI can reduce the risk of failure significantly. Because the standard RBI considers the component risk value to …

High Voltage Aqueous Electrolyte Based Structural Supercapacitors For Electric Vehicles, Deepak Pandey

Electronic Theses and Dissertations, 2020-2023

The current electric vehicles (EVs) face many challenges like limited charge capacity, low miles/charge, and long charging times. Herein, these issues are addressed by developing "energized composite," which is a multifunctional supercapacitor-based energy-storing carbon fiber reinforced polymer composite that can store supplemental electric energy and function as the body shell of EV's. This is achieved by developing a unique design, vertically aligning graphene sheets on carbon fiber electrodes and depositing metal oxides to obtain high energy density electrodes. A high-strength multilayer composite is fabricated using an alternate layer pattern configuration of epoxy and polyacrylamide gel electrolyte. The composite so developed …

The Comparison Of Pipe Thickness Selection Method Using Full Flange Rating And Non-Full Flange Rating Of Cryogenic Services In An Lng Plant Construction, Ari Agustar, Isdaryanto Iskandar, Wahyuaji Narottama Putra

Journal of Materials Exploration and Findings

Significant growth of gas demand as a source of power generation for domestic use and industries, mainly in the developed countries, has forced the effort to secure the gas supplies located thousands of miles away across the sea as an economical way of gas transportation instead of transporting by pipeline. LNG technology was created as the solution. Natural gas is refrigerated below its boiling point (-160^oC to -162^oC), known as cryogenic temperature or cryogenic service. Material of Construction (MOC) selection report showed that 304/304L and 316/316L Stainless Steel pipe could withstand and be suitable for this …

Ceria Defect Engineering Using Thin-Films/Ald And Biological Applications, Udit Kumar

Electronic Theses and Dissertations, 2020-2023

Ceria nanostructures have been utilized for various engineering applications due to their unique defect structure, enabling them to have regenerative redox properties. The ability to shuttle between Ce3+ and Ce4+ oxidation states extends to unique properties. Defect level in ceria is usually expressed in the Ce3+/Ce4+ ratio. It can be achieved by varying the size(0 to 3D), morphologies, dopants, hetero-nanostructures, and external stimuli. However, it is still a challenge to have precise control over defect structures in the ceria lattice. The current study aims to explore the thin film deposition techniques for cerium oxide using ALD (Atomic layer deposition) and …

A Constitutive Material Model For Simulating Texture Evolution And Anisotropy Effects In Cold Spray., Creston Michael Giles

Theses and Dissertations

Cold spray has seen rapid advancement since its inception and has shown significant potential as a method of additive manufacturing. However, the large plastic deformation and repeated heating/cooling cycles that the material undergoes during the cold spray process can result in gradients in material structure and large residual stresses. The purpose of this study is to extend the existing EMMI material model to include anisotropic material response through the use of orientation distribution functions to predict residual stresses and anisotropy resulting from cold spray and similar additive manufacturing processes. Through the use of a finite element simulation, yield surfaces for …

Platinum-Iridium Alloys In Jewelry, Nathen C. Christa, Seth Walker, Dylan Hallman

ME 4133/6133 Mechanical Metallurgy

One of the most widely used metals on the periodic table is Platinum (Pt). The name is derived from the Spanish Platina, meaning “silver.” This malleable, ductile material is widely used in applications due to its unique chemical properties. A couple of these unique properties include a high melting point and good resistance to corrosion or chemical attack. Platinum materials have alloys that are indispensable in the chemical laboratory for electrodes. This allows for material applications in crucibles and dishes to withstand elevated temperatures. Platinum is used primarily in catalytic converters in vehicles converting emissions from the vehicle’s engine into …

High-Carbon Steel In Additive Manufacturing, Chidi N. Agusiegbe, Devin Morton, Emmanuel Moore

ME 4133/6133 Mechanical Metallurgy

High-carbon steel can be processed through numerous methods. The method that will be focused on primarily is processing high-carbon steel through means of additive manufacturing. Additive manufacturing is the industrial production name for 3D printing, a computer-controlled process that creates three-dimensional objects by depositing materials, usually in layers. AM methods like wire laser additive manufacturing (WLAM) and electron beam melting (EBM) are all common methods for fabricating high carbon steel. The perks associated with these methods are that they improve some drawbacks of the natural properties of high-carbon steel. This paper discusses the uses of these additive manufacturing methods along …

High Carbon Steel In Additive Manufacturing, Emmanuel Moore Ii, Devin Morton, Chid Agusiegbe

ME 4133/6133 Mechanical Metallurgy

The first known use of carbon steel dates back to 500 A.D. when a blacksmith mistakenly used iron ore as a primary material for smithing. This material, as the name suggests, is made up of both carbon and iron. This material, as one of the most abundant at the time, was used most frequently in European and Asian countries. “Carbon steel first appeared around the year 500 AD in Damascus steel swords as well as Japanese swords. They were prized for their sharp edges and sturdiness compared to other weapons of the era. The composition of these swords was very …

Integration Of Hadfield Steel Into Modern Body Armor, Jason T. Fridlund

ME 4133/6133 Mechanical Metallurgy

The increased lethality of recently fielded projectiles mandates a proportional escalation in armor performance. Recent advancements in ceramic technologies have allowed designers to incorporate harder but more brittle materials into hard armor designs to defeat yet more capable penetrating projectiles. Ceramics suffer from the feature of shattering, however, even when impacted by threats below their design parameters. While this shattering mechanism is used effectively to dissipate energy from high-energy rifle projectiles, it is wasted on low-energy projectiles, and can result in easily damaged lifesaving gear, both of which are undesirable in combat. In contrast, steel body armor has been used …

High Carbon Steel In Additive Manufacturing, Chidi Agusiegbe, Devin Morton, Emmanuel Moore

ME 4133/6133 Mechanical Metallurgy

Infographic demonstrating the composition, and use of high carbon steels as well as the process of the material in additive manufacturing.

Nanocomposites For Applications In Ultracapacitors Based Energy Storage Systems, Duy Pham, Jake Ivirn, Jacob Dileonardi, Ben Mckinney, Ashish Aphale

Symposium of Student Scholars

Electrochemical capacitors also known as ultracapacitor is a potential technology for modern energy storage due to their high performance of charge capacity and fast charge-discharge rates. The superior performance of ultracapacitors will help to meet demands for energy systems in applications such as transportation. Ultracapacitor device consists of electrodes, a polymeric separator, and an electrolyte. Under the applied voltage, the migration of ions between two porous electrodes from the bulk of the electrolyte governs the performance of such devices. In this work, we present experimental research on the synthesis of different electrode materials using atomically thick graphene and conducting polymers. …

Development Of Electrochemical Sensors For The Detection Of Trace Contaminants, Quang Lam, Ashish Aphale, Duy Pham

Symposium of Student Scholars

Several industrial processes, such as stainless steel fabrication and textiles, produce heavy metal byproducts such as chromium. These heavy metals have detrimental effects on the surrounding environments and humans. Recently, electrochemical-driven sensors have been studied and show great potential in miniaturization while still providing measurements at a low cost. In addition, atomically thin allotropes of carbon, graphene, and graphene oxide have shown remarkable results in producing a highly responsive and selective sensor platform. These results are due to their excellent electrical conductivity, high surface area for utility, and physicochemical stability. The existing challenge for electrochemical-driven sensors is understanding the molecular …

Sae 8620 Pspp Map - Infographic, John F. Mitchener

ME 4133/6133 Mechanical Metallurgy

This infographic summarizes a Processing-Structure-Property-Performance (PSPP) Map for SAE 8620 alloy steel, with an emphasis on the gas carburization process. This PSPP map allows researchers and material scientists to better understand the processes that drive the microstructures, material properties, and ultimate performance parameters.

Nanoclays And Curcumin Based Food Packaging Material For Intelligent Food Packaging Applications, Kalpani Y. Perera, Swarna Jaiswal, Amit K. Jaiswal, Shubham Sharma

Articles

Bionanocomposite packaging eco-friendly alternatives with enhanced characteristics. This study aimed to develop a bionanocomposite intelligent packaging. Sodium alginate, gelatin, Curcumin (Cur), glycerol, and Nanoclay (NC) films were prepared. The influences of nanoclay and curcumin on the surface, optical, mechanical, chemical, barrier, and pH-indicating properties were studied. The results showed that the lightness of films was reduced by 1.28 folds compared to NC (control) film, while the yellowness of films increased by 5.82 folds. Film transparency was reduced by 9.3 folds and a 3.46 folds increase in UV barrier properties was observed compared to NC (control) film. The highest tensile strength …

Clove Essential Oil And Nanoclays-Based Active Food Packaging, Kalpani Y. Perera, Shubham Sharma, Amit K. Jaiswal, Swarna Jaiswal

Articles

Active food packaging materials enhance the shelf-life of food products while reducing food waste. The current study aims to develop a biodegradable active food packaging material. The food packaging material was developed with the incorporation of clove essential oil, sodium alginate, gelatin, and nanoclay films were prepared. The influences of nanoclay and clove on the surface, optical, mechanical, chemical, barrier, and pH-indicating properties were studied. The lightness and yellowness increased by 1.06 folds and 3.34 folds when compared to clove (control), respectively. The UV barrier property 0.08±0.01nm in all films, while 8.37 folds reduction in transparency has been observed as …

Cold Plasma Technology In Food Packaging, Kalpani Y. Perera, Jack Prendeville, Amit K. Jaiswal, Swarna Jaiswal

Articles

Cold plasma (CP) is an effective strategy to alter the limitations of biopolymer materials for food packaging applications. Biopolymers such as polysaccharides and proteins are known to be sustainable materials with excellent film-forming properties. Bio-based films can be used as an alternative to traditional plastic packaging. There are limitations to biopolymer packaging materials such as hydrophobicity, poor barrier, and thermos-mechanical properties. For this reason, biopolymers must be modified to create a packaging material with the desired applicability. CP is an effective method to enhance the functionality and interfacial features of biopolymers. It etches the film surface allowing for better adhesion …

Thermal Atomic Layer Etching Of Mos2 Using Mof6 And H2O, Jake Soares, Anil U. Mane, Devika Choudhury, Steven Letourneau, Steven M. Hues, Jeffrey W. Elam, Elton Graugnard

Materials Science and Engineering Faculty Publications and Presentations

Two-dimensional (2D) layered materials offer unique properties that make them attractive for continued scaling in electronic and optoelectronic device applications. Successful integration of 2D materials into semiconductor manufacturing requires high-volume and high-precision processes for deposition and etching. Several promising large-scale deposition approaches have been reported for a range of 2D materials, but fewer studies have reported removal processes. Thermal atomic layer etching (ALE) is a scalable processing technique that offers precise control over isotropic material removal. In this work, we report a thermal ALE process for molybdenum disulfide (MoS₂). We show that MoF₆ can be used as …

Thermal Effect On Dislocation Interactions In Magnesium Alloy, Yuzhi Zhu, Yi Chen, Dewen Hou, Zidong Wang

Materials Science and Engineering Faculty Publications and Presentations

In this work, dislocation interactions are directly observed and analyzed by using in-situ transmission electron microscope during heating processes in a pre-deformed Mg-3Al-1Zn magnesium alloy. Thermodynamic behaviors of two types of dislocations are investigated, i.e., individual dislocations and low-angle grain boundary arranged by dislocations. The results show that the low-angle grain boundary remains stable as the heating temperature increases to 673 K, while most of the individual dislocations disappear until the heating temperature reaches 473 K. Furthermore, the low-angle grain boundary tends to absorb individual dislocations nearby. The stability and the annihilation of both types of dislocations are discussed.

Physical Modeling Of Filament Growth And Resistive Switching In Metal Oxide-Based Rram, Kena Zhang

Material Science and Engineering Dissertations - Archive

Metal oxide-based resistive random-access memories (RRAM) exhibit several excellent performances, such as nanosecond switching speed, large write-erase endurance, and long retention time, and can potentially replace the traditional circuit elements for use as the fundamental units in next-generation hardware deep-learning or neuromorphic systems. The functionality of a metal oxide-based RRAM is attributed to an oxygen vacancy (V_O^(..))-rich conductive filament (CF), which initially forms, and later dissolves or regrows inside the oxide layer during the resistive switching process. However, the complicated interplays among the coexisting chemical, electrical, mechanical, and thermal effects during the formation, growth, and rupture of the CFs make …

Effects Of Graphene In High-Density Polyethylene Microfibers, Ashish Lal Sivadas Anilal

Material Science and Engineering Theses - Archive

High-Density Polyethylene uniquely can induce banded spherulites as it is crystallized from its melt. We studied the effects of graphene in the crystallography of banded HDPE by examining parameters such as the extent of twisting, spherulitic growth, and nucleation density. The application of graphene as a multifunctional filler in polymer matrices is a great topic of interest because graphene at low concentrations can bring many improvements in mechanical, electrical, and thermal properties. We synthesized graphene oxide by chemical oxidation of graphite and further studied its effects in the twisted crystallography of HDPE. Three batches of fibers were extruded: two batches …

Sub-10k Cold-Electron Injection To Silicon At Room Temperature, Ojas Tushar Bhayde

Material Science and Engineering Theses - Archive

The Fermi-Dirac thermal excitation of electrons results in unwanted off-state leakage currents in metal-oxide-semiconductor field-effect transistors (MOSFETs), leading to excessive power consumption in modern electronic devices. The electron thermal excitation results in a theoretical subthreshold slope limit of 60 mV/decade at room temperature, which forces the devices to use a high supply voltage leading to high power consumption. This study investigates a new architecture capable of suppressing electron thermal excitation by using a quantum well (QW) as an energy filter. The QW energy filter is composed of a tunneling barrier 1 (0.5 to 1 nm Al2O3 or 0.3-1 nm Si3N4 …

Iron Phosphate Glass For The Immobilization Of Dehalogenated Salt Waste, Matthew Aaron Page

All Theses

Electrochemical reprocessing can be used to recycle presently stored nuclear fuel and consists of dissolving that used fuel in molten salt and the waste produced from these processes is a small amount of a high-level salt waste. Vitrification has been selected as the primary means of safely disposing high and low level radioactive waste. This is due to glass’ ability to incorporate many elements within its matrix, and it is chemically durable with the addition of network formers and other glass forming chemicals. With over 90,000 tonnes of nuclear waste in the United States, the avoidance of additional steps required …

Wet Chemical Synthesis And Properties Of Argyrodite Sulfide Solid Electrolytes For Solid State Lithium Batteries., William Arnold

Electronic Theses and Dissertations

The commercialization of the lithium-ion battery (LIB) in 1991 was responsible for the explosion in portable electronic technologies that has been seen over the past 30 years. With the advent of electric vehicles and other high-powered technologies, there is tremendous demand for LIBs with higher energy density and high safety. To achieve this, new electrode materials must be explored. The obvious choice of anode material would be pure metal lithium, which has a theoretical specific capacity of 3860 mAh g^-1 . Unfortunately, metal lithium anodes have not been widely commercialized due to their tendency to react violently with the …

Design, Fabrication, And Characterization Of Conjugated Polymeric Electrochemical Memristors As Neuromorphic/Integrated Circuits, Benjamin Grant

All Dissertations

Organic materials are promising candidates for future electronic devices compared to the complementing inorganic materials due to their ease of processability, use, and disposal, low cost of fabrication, energy efficiency, and flexible nature toward implementation as flexible and non-conformal devices.With that in mind, electrochemical materials have been widely demonstrated with commercial use as sensors, displays, and a variety of other electronic devices. As Moore's law predicts the increase in the density of transistors on a chip, the requirement to create either smaller transistors or the replacement of the transistor device entirely is apparent. Memory resistors, coined ``memristor", are variable resistive …

Characterization Of An Amine-Thiol Cosolvent System : Ethylenediamine And Mercaptoethanol, Fernanda Giongo Fernandes

Legacy Theses & Dissertations (2009 - 2024)

Since its introduction, the amine-thiol cosolvent system has been successfully utilized for the deposition of various thin-film devices, but its mechanism of action is still uncertain. Herein, we have attempted to dissect some of the chemical characteristics of amine-thiol cosolvents, with a special interest taken towards a mixture of ethylenediamine (en) and mercaptoethanol (ME). Conductivity was measured for multiple amine-thiol combinations at different ratios to determine extent of ionization in solution, with en-ME having one of the highest solution conductivities. Exposing the solution to air for several days was found to decrease the conductivity of en-ME, indicating the formation of …

Effects Of Surface Noise On Printing Artifacts: An Artistic Approach To Hiding Print Artifacts, Samuel New

All Theses

This research focuses on improving the quality of Fused Filament Fabrication (FFF) 3D printing by using fractal noise to mask certain print artifacts (e.g. layer lines and stair-stepping). The use of textures is quite common in digital sculpting for aesthetic reasons. This study focuses on finding specific textures that minimize visible 3D print artifacts.

Building Structures From Mycelium, Noah M. Brown

Physics

The purpose of this project was to develop a method for creating bricks from mycelium and agricultural waste. The bulk of the research happened in two parts, the first part being a period in which different substrates, strains, and methods were used build the bricks. This research took place in San Luis Obispo and was aided by a group of students in PSC392 under Dr. Pete Schwartz in early 2022. After developing a method for constructing these bricks, the research was moved to St. Thomas, Jamaica, in collaboration with an ecovillage called The Source Farm from July to September. The …

An Application Of Optimized Bistable Laminates As A Low Velocity, Low Impact Mechanical Deterrent, Graham Lancaster

All Theses

This research considers the problem of using bistable laminates as a mechanical deterrent to the impending impact of a particle. The structure will be controlled through an algorithm that will utilize piezoelectric devices to activate them in unison with the bistable laminate to successfully deter. A novel experimental setup will be constructed to ensure that the bistable laminate stays fixed when acting as a mechanical deterrent. Piezoelectricity is the main driving force of the bistable laminate to morph and this study will use a Macro Fiber Composite (MFC) actuator that contains piezoelectric ceramic rods in a patch to transfer electrical …

The Living Breakwaters Pdr Efforts Econcrete Resource Analysis, Guianina Ferrari, Shervon Stephens, Calvin O. Walters Jr.

Publications and Research

On October 29, 2012, Superstorm Sandy impacted 443,000 people and caused nearly $19 billion (about $58 per person in the US) worth of damage within New York City. As part of the New York City infrastructure reparation plan, the Living Breakwaters project in Tottenville addressed coastal resilience, allocating $100M of public funds to a series of artificial breakwaters by the southwest coast of Staten Island. Each breakwater is constructed and designed to mitigate water flow in storm events. ECOncrete, a primary element of the breakwater, is a specialty cast cementitious product that is marine organism-friendly that encourages biocalcification and photosynthesis. …

Heteroepitaxy Of Gasb On Gaas (111)A For Electron Transport Studies, Madison Drake

Boise State University Theses and Dissertations

III-V semiconductors grown by molecular beam epitaxy (MBE) on (111) surfaces have some interesting electronic properties. For certain materials with a (111)-orientation, the Γ- and L-valleys are reasonably close in energy. This means that it may be possible to take advantage of electron conduction in the L- and Γ-valleys at the same time, allowing us to overcome the so-called “density-of-states bottleneck,” and enable transistors with large drive currents.¹ We have investigated this phenomenon in GaSb- and InAs-based 2D electron gases for which the electron effective masses are low.

However, growth of materials with a (111) orientation is typically more …