Engineering Commons^™

Sub-1k Cold Electron Transport At Room Temperature, Anthony Martinez

Material Science and Engineering Dissertations - Archive

Thermally excited electrons at the high-energy tail of the Fermi-Dirac distribution impose fundamental limitations on the performance of solid-state electronic and spintronic devices. For example, the thermally excited electrons obscure the Coulomb blockade essential for single-electron transport. The hot electrons can also overcome the energy barrier of Metal-Oxide-Semiconductor Field-Effect transistors (MOSFETs), causing unwanted leakage currents that lead to excessive power consumption in the integrated circuits. This study investigates an approach in which quantum states are used to manipulate electron tunneling, blocking the transport of thermally excited hot electrons, thereby enabling cold-electron transport at room temperature. Here two heterogeneous quantum wells …

Kissing Bond Assessment In Adhesive Bonded Carbon Fiber Reinforced Composites Using Dielectric Spectroscopy, Minhazur Rahman

Mechanical and Aerospace Engineering Dissertations - Archive

The widespread use of fiber-reinforced composites in industries such as space, aviation, automobiles, and construction necessitates the formation of robust composite joints between critical structural components. Although adhesive-bonded joints are superior with improved load distribution and reduced weight, they are often overlooked in favor of bolted joints and mechanical fasteners due to the lack of reliable Non-Destructive Evaluation (NDE) techniques for adhesive-bonded composites. The anisotropic nature of the substrate and the intricate interfacial interactions between the adherend and adhesive material present significant challenges for conventional NDE methods. Moreover, weak adhesive bonds can result from uncontrolled manufacturing parameters, such as accidental …

Experimental Investigations And Optimization Of 3d Printed Cellular Structures For Protection Against Traumatic Brain Injury, Aaron R. Jackson

Mechanical and Aerospace Engineering Dissertations - Archive

Traumatic Brain Injury (TBI) disrupts brain function due to head impacts, blast exposures, and ballistic penetrations. It is a significant cause of mental health issues and disability, particularly among military personnel. Historically, combat helmets were designed primarily to protect against fragments. However, recent data highlights the need for helmets that also protect against blast and blunt impacts. Effective TBI prevention requires helmets that address various energy threats while remaining lightweight. A critical metric in this effort is head acceleration, which is closely linked to injury across different scales of brain damage.

Four lattice structures were 3D printed using Digital ABS …

Synthesis Of Ni-Based Intermetallics By Electrolytic Plasma Processing Of Ti And Ti-Based Alloys, Chuzhong Zhang

Material Science and Engineering Dissertations - Archive

EPP is an innovative surface modification technique that enables the deposition of metal ions from the electrolyte and their integration with substrate atoms to form intermetallic compound surface layers. EPP offers advantages such as high deposition rates, environmental cleanliness, and operational simplicity. In this study, Ni-Ti intermetallic layers were successfully synthesized on a Ti-6Al-4V substrate using EPP. The properties of the resulting Ni-Ti intermetallic layers were characterized using SEM, EDS, XRD, TEM, nanoindentation, and tribology tests.

This work aims to understand the fabrication mechanism and investigate the effects of various processing parameters on the EPP process. Key factors such as …

Generalizable Fugitive Carrier Method For 3d Printing Of Hydrogels, Hakan Arslan

Mechanical and Aerospace Engineering Dissertations - Archive

Hydrogels, with physical characteristics resembling biological soft tissues, hold great potential for bioinspired and biomedical applications. However, using them in additive manufacturing systems has challenges because of their poor mechanical and rheological properties. In response to these challenges, we introduce a fugitive carrier method, a novel and generalizable approach for materials incompatible with pneumatic-based extrusion three-dimensional (3D) printers. Our developed fugitive carrier method allows the 3D printing of a broad spectrum of hydrogel precursors with low viscosity while retaining their inherent properties. This technique has been successfully demonstrated by creating biomimetic structures with anisotropic and programmable systems utilizing temperature-sensitive hydrogel …

Quantitative Modeling Of Micro Discharge And Oxide Growth In Plasma Electrolytic Oxidation Of Titanium, Kingsley I. Ochiabuto

Material Science and Engineering Dissertations - Archive

Plasma electrolytic oxidation (PEO) has been extensively applied in the past to improve the tribological properties of titanium and its alloys allowing their widespread use in industrial applications. However, the complete PEO mechanism of action remains unclear. While there are several mathematical models providing useful insights into the PEO process, they do not fully incorporate the effect of applied potential on the outcomes of PEO. In this work, we develop an experimentally informed computational model by expanding on the dielectric breakdown model. We incorporate experimental data to extract key parameters, exploring the iterative dependency of the oxide thickness and ionic …

Spray-On Sensor Formulations That Enable Detection Of Physical And Chemical Stimuli, Priyanka Shiveshwarkar

Bioengineering Dissertations - Archive

Polydiacetylene based materials have been used for a variety of liquid phase sensing applications. There remains a need for low cost, easy-to-read gas phase sensors for continuous monitoring of physiological parameters and environmental hazards at work or at home. Such sensors could have applications in everyday life, for example as point-of-care or at home testing devices to enable early detection of disease to reduce healthcare costs. Making accessible and non-invasive technologies for monitoring of health and health risks provides individuals with the ability to be proactive in regard to their health and safety. In other examples, environmental monitoring systems could …

Generating Blood Analog For Laser Induced Fluorescent Particle Image Velocimetry, Chungyiu Ma, Jared Chong, Hang Yi, Zifeng Yang, Luke Bramlage, Bryan Ludwig

Mechanical and Materials Engineering Faculty Publications

To mimic blood non-Newtonian viscosity features under designated temperatures from 305 to 315 K, transparent blood analogs were generated by the mixture of xanthan gum and deionized water with fluorescent particles for laser induced fluorescent particle image velocimetry.

Enhancing Scanning Tunneling Microscopy With Automation And Machine Learning, Darian Smalley

Graduate Thesis and Dissertation 2023-2024

The scanning tunneling microscope (STM) is one of the most advanced surface science tools capable of atomic resolution imaging and atomic manipulation. Unfortunately, STM has many time-consuming bottlenecks, like probe conditioning, tip instability, and noise artificing, which causes the technique to have low experimental throughput. This dissertation describes my efforts to address these challenges through automation and machine learning. It consists of two main sections each describing four projects for a total of eight studies.

The first section details two studies on nanoscale sample fabrication and two studies on STM tip preparation. The first two studies describe the fabrication of …

Sustainable Additive Manufacturing Of Polysulfone Membranes For Liquid Separations, Brian Leonard, Harrison Loh, David Lu, Ebuka A. Ogbuoji, Isabel Escobar, Konstantinos Sierros, Oishi Sanyal

UK CARES Faculty Publications

Membranes serve as important components for modern manufacturing and purification processes but are conventionally associated with excessive solvent usage. Here, for the first time, a procedure for fabricating large area polysulfone membranes is demonstrated via the combination of direct ink writing (DIW) with non-solvent induced phase inversion (NIPS). The superior control and precision of this process allows for complete utilization of the polymer dope solution during membrane fabrication, thus enabling a significant reduction in material usage. Compared to doctor blade fabrication, a 63% reduction in dope solution volume was achieved using the DIW technique for fabricating similarly sized membranes. Cross …

Graphene Reinforced Polymer Composite For Small-Scale Vertical Axis Wind Turbine Rotors, Kunal A. Bachim

Mechanical and Aerospace Engineering Theses - Archive

Polymers have evolved as an indispensable asset in various sectors ranging from packaging and construction to energy and aerospace. However, the accumulation of polymer waste poses a necessity to shift toward sustainable waste management processes. Mechanical recycling is a primary method in establishing a circular economy approach for polymers. However, a fundamental challenge arises in this process: a decrease in the mechanical performance of the recycled product compared to that of its pristine counterpart.

This project addresses the challenge of enhancing the recyclability of polyethylene terephthalate (PET) from discarded polymer material by incorporating graphene nanoparticles into the polymer matrix during …

Enhancing Electromigration Reliability In Solder Interconnects Through Microstructure Control And Thermomechanical Failure Mechanisms In Thin Metal Lines Under Surge Current Conditions, Hariram Mohanram

Material Science and Engineering Dissertations - Archive

The relentless miniaturization of semiconductor devices has intensified reliability challenges in electronic packaging, particularly for solder interconnects and thin metal lines. This dissertation investigates two critical failure mechanisms—electromigration (EM) and thermomechanical fatigue (TMF)—and explores strategies to mitigate these effects. Electromigration, driven by high-density current-induced atomic migration, significantly impacts solder interconnects. This study examines the role of Under-Bump Metallization (UBM) and solder microstructure in improving EM reliability. Findings reveal that thicker UBMs delay void nucleation and enhance EM resistance, while the absence of UBM leads to failure through vertical void propagation. Additionally, grain orientation, particularly the c-axis alignment in Sn grains, …

Effect Of Admixtures On Rapid Hardening, Self-Consolidating Concrete, Haley Johnson

Theses and Dissertations--Civil Engineering

Self-consolidating, rapid-hardening concrete is a sought-after product in the market now, however the effects of admixtures on fresh and hardened concrete rheology are still uncertain. This study aims to create a self-consolidating concrete (SCC) using calcium sulfoaluminate (CSA) cement for its rapid-hardening properties, and tests two set time retarders and two viscosity-modifying admixtures (VMAs) to determine how they affect the properties of concrete. The properties studied in this thesis are workability, viscosity, set times, air content, compressive strength, and freeze-thaw resistance of self-consolidating concrete. It was found that tartaric acid creates a very workable SCC with consistent results regardless of …

Processing & Properties Of Zirconium Carbide Manufactured By Ceramic On-Demand Extrusion, Clare Sabata

Masters Theses

"This research focuses on the development of a zirconium carbide (ZrC) paste for use in material extrusion direct ink write additive manufacturing (AM) followed by the pressure less densification of ZrC and the mechanical and thermal characterization of the resulting ceramics. A highly loaded, aqueous paste was developed using commercial ZrC powder ball milled to ~1 μm. Optimal dispersant, binder, and solids loading were found by rheological characterization. The paste composition consisted of 46-47 vol% ZrC, 43.5 vol% distilled water, 8.1 vol% dispersant, and 1.6 vol% binder. A yield stress of ~8 Pa allowed for shape retention upon removal of …

Sub-Critical Crack Growth And Fatigue Behaviour Of Alkali Silicate Glass, Noah Weyrauch

Masters Theses

"Delayed failure in silicate glasses can be linked to subcritical crack growth (SCCG) where surface defects grow over time until catastrophic failure. This phenomenon originates from stress-enhanced chemical interactions between the environment (e.g. water) and the strained silicate bonds at the crack tip. SCCG must be accounted for to predict the long-term survivability of silicate-glass components. This study compares two methods to measure SCCG parameters for a commercial alkali silicate sealing glass and for a series of binary xNa₂O-(1-x)SiO₂ glasses, where 0.15 ≤ x ≤ 0.35. A constant moment double cantilever beam (DCB) technique was used to …

3d Flow Field Quantification In An Artery Model Using Optical Flow Method Based On Simulated Multi-Angle Angiography, Zifeng Yang, Hang Yi, Luke Bramlage, Bryan Ludwig

Mechanical and Materials Engineering Faculty Publications

3D flow field in a numerically simulated arterial model is quantified using the three-dimensional optical flow method based on simulated simultaneous multi-angle X-ray angiography of the blood flow with contrast agent perfusions.

Strategies To Mitigate Efflorescence In Walls Constructed Using Clays Bricks; A Review Article, Marwa Abdulkareem. Anber, Soran Abdulrahman Ahmad, Naros Rahman Mahmoud, Kawan Fuoad. Kayani, Mohammed Ali Abdulrehman

Al-Esraa University College Journal for Engineering Sciences

_{The construction of buildings, especially residential housing for communities, is a significant industry on a global scale. Masonry units such as bricks, blocks, and stones are often utilized materials. Bricks are highly regarded because to their widespread availability, cost-effectiveness, and excellent insulating capabilities. Nevertheless, the presence of efflorescence presents a difficulty in the construction of brick walls. Efflorescence refers to the process in which salts move to the outer layer of the brick, resulting in the formation of white deposits and negatively impacting its visual appeal. Efflorescence is caused by various circumstances, such as the existence of salts in bricks, …}

The Importance Of Cryptography In Cloud Computing, Saja Alaam Talib

Al-Esraa University College Journal for Engineering Sciences

Cloud computing has grown as a widely accepted concept simultaneously, as the alarms for the security of data and information. This paper seeks to establish the comprehensive roles of cryptography in tackling these issues in the Cloud environment. The study begins with the historical background of cryptography and then moves on to analyze trends in information technology before discussing on the challenges to security in cloud computing. The goal of its publication is to highlight the importance of using cryptographic technologies for the protection of information confidentiality, its integrity and compliance. The combination of literature review and the case study …

A Concept Of Producing Aluminum In-Situ On The Moon Through Molten Salt Electrolysis, Jacob N. Ortega, Jeffrey Smith, Fateme Rezaei, David Bayless, William Schonberg, Daniel Stutts, Daoru Han

Materials Science and Engineering Faculty Research & Creative Works

This paper presents a concept of producing aluminum in-situ on the lunar surface, namely, the Lunar In-Situ Aluminum Production through Molten Salt Electrolysis (LISAP-MSE) method developed at Missouri University of Science and Technology. This paper aims to demonstrate the use of electro-deoxidation to reduce aluminum oxide (i.e., alumina) into aluminum and oxygen gas via electrolysis in a molten salt bath for the production of aluminum on the Moon. It is shown that with a steady supply of hydrogen chloride, this in-situ resource utilization (ISRU) method could supply several necessary materials consumed in the electro-deoxidation process except hydrogen chloride to produce …

Pressureless Sintering And Properties Of Additively Manufactured Zrb2–Sic, Marharyta Lakusta, Nicholas M. Timme, Jeremy L. Watts, William G. Fahrenholtz, Gregory E. Hilmas, David W. Lipke

Materials Science and Engineering Faculty Research & Creative Works

Densification behavior, grain growth kinetics, mechanical and thermal properties of pressurelessly sintered zirconium diboride–silicon carbide (ZrB2–SiC) fabricated by extrusion of high solids loading pastes have been studied. The effects of sintering temperature (1600–2300°C), heating rate during constant heating rate sintering (10–50°C/min), and time during isothermal sintering (3–24 h) on density and grain size were examined. The apparent activation energy for densification was determined to be 940 ± 90 kJ/mol, suggesting lattice diffusion as the dominant sintering mechanism. Grain growth of both ZrB2 and SiC followed a normal grain growth power law with grain growth exponent n = 2 indicating diffusion-controlled …

Ijmc/Fef Student Research Competition: Understanding The Effect Of Boron On Graphite Nodularity And Distribution In Ductile Iron Castings, Chase Schroeder, Colleen Lehrer, Simon Lekakh, Laura Bartlett

Materials Science and Engineering Faculty Research & Creative Works

Ductile iron is renowned for its superior mechanical properties, higher strength, and ductility, combined with excellent castability and the economy of using a scrap melting process. The matrix structure as well as morphology and distribution of graphite nodules significantly influences mechanical properties of as-cast ductile iron. Boron contamination of the scrap supply has presented some difficulties in controlling the microstructure and mechanical properties of certain gray and ductile iron grades. In the current study, the effect of boron levels up to 95 ppm was determined on graphite nodularity and distribution in as-cast ductile iron castings as a function of section …

Additive Manufacturing Of Novel Lightweight Insulation Refractory With Hierarchical Pore Structures By Direct Ink Writing, Saisai Li, Jiaxuan Xin, Ruoyu Chen, Haiming Wen

Materials Science and Engineering Faculty Research & Creative Works

A direct ink writing process using fly ash foaming slurries was employed for the additive manufacturing of lightweight mullite insulation refractory with hierarchical pore structures. The viscosity, thixotropy, and shear thinning behavior of the inks were analyzed to investigate the effect of the inorganic binder and dispersant of the foaming inks. A slurry exhibiting excellent rheological characteristics was identified, consisting of 45 wt% fly ash floating beads, 55 wt% water, 3.0 wt% additional dispersant, and 6.0 wt% additional binder. Furthermore, through the optimization of printing parameters such as printing pressure and printing speed, notable enhancements were achieved in the pore …

Phenolic Polymer Infiltration And Pyrolysis Process For Additively Manufactured Carbon/Peek Composites To Produce Carbon–Carbon Composites, S. Weiler, H. A. Haffner, K. Chandrashekhara, J. Watts, G. E. Hilmas, J. Bayldon, L. M. Rueschhoff

Mechanical and Aerospace Engineering Faculty Research & Creative Works

Carbon–carbon composites are carbon fibers reinforced with carbon matrix and are classified as advanced materials well suited for high-temperature structural applications. Carbon–carbon composites are characterized by maintaining excellent mechanical properties and structural stability at high temperatures and have been used in aerospace application as nozzles, heatshields, and leading edge. However, conventional methods to manufacture carbon–carbon composites are costly and time-consuming. the aim of this work is to develop a method for creating additively manufactured (AM) carbon–carbon composites using a high-pressure re-infiltration process. in doing so, less infiltration cycles are required compared to a low-pressure re-infiltration, reducing the total manufacture time. …

Damage Initiation Of 15v38 Steel Bar During Square-To-Round Hot Rolling Process, Siva Sai Krishna Dasari, Henry Adekola Haffner, K. Chandrashekhara, Mario F. Buchley, Simon N. Lekakh, Ronald J. O'Malley

Mechanical and Aerospace Engineering Faculty Research & Creative Works

Hot rolling processes have been extensively used to produce round bars by reducing the cross-sectional area of continuously cast steel. The current trend toward increasing productivity often requires a more aggressive reduction per pass. Establishing safe and optimized hot rolling parameters must be determined to avoid damage while deforming the specific steel composition. Understanding the damage mechanism during the metal forming process is vital for product quality. Herein, a combined experimental and simulation approach is developed to track the evolution potential damage during hot bar rolling. Hot tension tests are conducted on as-cast vanadium micro alloyed 15V38 steel at different …

Novel Re-Crosslinkable Preformed Particle Gels (Rppg) For Parent- And Infill-Well-Fracture Interactions Mitigation, Xiaojing Ge, Adel Alotibi, Ahmed Al-Hlaichi, Yanbo Liu, Tao Song, Junchen Liu, Baojun Bai, Thomas P. Schuman

Geosciences and Geological and Petroleum Engineering Faculty Research & Creative Works

Hydraulic fracturing treatments in unconventional infill (or "child") wells can be significantly affected by depletion from existing parent-well, resulting in asymmetrical fracture growth. These issues may lead to excessive load-water production, proppant deposition, casing deformation in the parent well, and unbalanced stimulation of infill wells. To mitigate these effects, various strategies have been proposed, including the use of far-field diverters in child wells and repressurization of parent wells. Additionally, an increasingly popular strategy involves injecting near-wellbore diverters to temporarily plug entry points into the parent wellbores during frac operations on infill wells. To achieve better application, a novel low-cost, self-degradable, …

Electrostatic Sorting Of Lunar Regolith Simulants For Sustainable Resource Utilization: Modeling And Characterization Of Particle Size Distribution, Abdullah Al Moinee, Peter Bachle, Kyle Newport, William Schonberg, David Bayless, Jeffrey Smith, Daoru Han, Fateme Rezaei

Civil, Architectural and Environmental Engineering Faculty Research & Creative Works

In pursuit of sustainable resource utilization on the Moon, this paper delves into modeling and characterization of particle size distribution (PSD) of lunar regolith simulants in an electrostatic system. A prototype electrostatic sieve was built and tested with four sample simulants mirroring properties of lunar mare and highland regolith. An alternating four-phase (90 degrees, 180 degrees, 270 degrees, 360 degrees) traveling square-wave was utilized for particle-directed transport to model the diverse trajectories of the particles. Numerically, we scrutinized how the distribution functions of the particles are manifested as the electrostatic field propagates, with a focus on three distinct particle ranges …

Restoration Of Strength In Polyamide Woven Glass Fiber Organosheets By Hot Pressing, Mohammad Nazmus Saquib, Edwing Chaparro-Chavez, Christopher Morris, Kuthan Çelebi, Diego Pedrazzoli, Mingfu Zhang, Sergii G. Kravchenko, Oleksandr G. Kravchenko

Mechanical & Aerospace Engineering Faculty Publications

Thermoplastic composite organosheets (OSs) are increasingly recognized as a viable solution for automotive and aerospace structures, offering a range of benefits including cost-effectiveness through high-rate production, lightweight design, impact resistance, formability, and recyclability. This study examines the impact response, post-impact strength evaluation, and hot-pressing repair effectiveness of woven glass fiber nylon composite OSs across varying impact energy levels. Experimental investigations involved subjecting composite specimens to impact at varying energy levels using a drop-tower test rig, followed by compression-after-impact (CAI) tests. The results underscore the exceptional damage tolerance and improved residual compressive strength of the OSs compared to traditional thermoset composites. …

Ring Opening Functionalization Of Thiolactone Homopolymers For Ros Scavenging, Aaron Priester, Forrest Kievit, Anthony J. Convertine

Materials Science and Engineering Faculty Research & Creative Works

In This Research, We Explored the Synthesis and Application of Thiolactone Acrylamide (TLA) Polymers for Neutralizing Reactive Oxygen Species (ROS), Produced as a Result of Traumatic Brain Injury (TBI). We Synthesized Well-Defined TLA Polymers using RAFT (Reversible Addition-Fragmentation Chain Transfer) Polymerization Across a Range of Monomer-To-Chain Transfer Agent ([M]0/[CTA]0) Ratios to Achieve a Range of Molar Masses. Polymerizations Were Carried Out using a Trithiocarbonate CTA (Chain Transfer Agent) with AIBN (Azobisisobutyronitrile) as the Initiator in N'N-Dimethylacetamide (DMAc) at 60 °C. Kinetic Studies Indicated a Linear Increase in Molar Mass with Conversion, Pseudo-First-Order Kinetics, and Molar Mass Values that Are Consistent …

Effects Of Hemp Fibers On The Mechanical Performance Of Concrete, Hamida Baassou

Masters Theses

The construction industry is known to be globally the number one contributor to greenhouse gas emissions (GHG) and energy consumption. The purpose of this study is to examine the potential use of hemp as a concrete reinforcement, its mechanical properties and strength, its environmental and socio-economic advantages, and its limitations. To examine the mechanical performance of hemp fiber, 54 specimens will be tested for compressive, tensile, and flexural strength. This was done in two parts. In the first part hemp fibers in two different ratios (0.5v% and 1v%), and two different treatments (water and 5% sodium hydroxide) were added to …

Nano-Patterned Si Structures For Optical Filters And Electro-Mechanical Relays: Fabrication, Characterization, Prospects, And Limitations, Md Ataul Mamun

Theses and Dissertations

Nanofabrication technology, especially nanopatterning, is a rapidly advancing field that has already resulted in creating novel devices and holds promise for producing even more with unmatched performance. These techniques also allow us to gain insight into physical phenomena at the micro- and nanoscale. The ultimate performance of nanofabricated devices and their compatibility with existing Si-based CMOS technology hinge upon the careful selection of materials and precise design, coordinated with meticulous pattern transfer. In this work, we applied nanopatterning techniques on silicon to create optical filters for the shortwave infrared (SWIR) region and nanoelectromechanical system (NEMS) relay-based logic gates. Additionally, these …