Engineering Commons^™

Study On The Microband Array Electrode-Based Glucose Microsensor, Neng-Qin Jia, Chui-Jue Sun, Lin Gao, Zong-Rang Zhang, Jian-Zhong Zhu, Guo-Xiong Zhang

Journal of Electrochemistry

The microband array electrode (MAE) consisting of 11 Pt microband of 5 m in wide, 2000 m long and 85 m gap was fabricated with a thin film techology. The MAE was characterized by means of cyclic voltammetry in a solution of K₃Fe(CN)₆ and H₂O₂. The results showed higher current density on MAE than on conventional Pt eletrode due to the strong edge effect of the former. A glucose microsensor was constructed with the substrate electrode of microband array. Microband array electrode was modified by Nafion followed by the immobilization of ferrocene onto …

In Situ Ftir Spectroelectrochemical Study Of Palladium Hexacyanoferrate Thin Film Deposited On Glassy Carbon Electrode, Ai-Li Bo, Xiang-Qin Lin

Journal of Electrochemistry

The electrochemically deposited Palladium hexacyanoferrate thin film on Glassy Carbon electrode (PdHCF|GC) has been studied in HCl, KCl and NaCl solutions by in-situ external reflection FTIR spectroelectrochemical technique. It is found that the behavior of the electroactive PdHCF film can be understood in terms of two states: Pd₂Fe(II)(CN)₆ formed in the inner layer and (M⁺)2Fe(II)(CN)₆ (M⁺: electrolyte cation) formed in the outer layer. The inner layer is oxidized at E_m=0.87 V in 1 mol/L KCl, while for the outer layer Em=0.77 V(vs. Ag/AgCl). In 1 mol/L NaCl or HCl solutions, …

Influence Of Ptfe And Nafion On The Utilization Efficiency Of Pt/C Catalyst In Pemfc, Xiao-Liang Cheng, Bao-Lian Yi, Jing-Xin Zhang, Ming Han, Ya-Guang Qiao

Journal of Electrochemistry

With cycling voltammetry curve(C-V), TEM and SEM photographs, the influence of PTFE and Nafion on the platinum utilization in catalyst layer of PEMFC was investigated. The results show that in gas diffusion electrode, the blocking effect of PTFE in the platinum utilization is not pronunced. In the thin-film catalyst layer, the electron conduct of the catalyst was blocked by the nafion solid and this caused the decrease of platinum utilization. With the increase of the nafion content in the catalyst layer, both platinum utilization and the electron conductivity decreased in the catalyst layer. Because the molecule size of nafion is …

Preparation And Application Of Gold-Film On The Surface Of Bacterial-Modified Carbon Paste Electrode, Rong-Zong Hu, Yan-Ping Ruan, Hao Xu, Jin-Kun Fu, Wei-De Zhang, Wen-Yun Hu

Journal of Electrochemistry

A novel method for preparation of gold-film composed of ultra-fine gold particles was reported in this paper. The gold-film was prepared by electrochemical method on the surface of the paste electrode modified with the strain Bacillus sp. D01 which has strong ability to absorb and reduce Au³⁺. In addition, this paper reported an experimental method of determining trace amount of Cu²⁺ in water solution using cathodic stripping analysis to estimate the performances of the obtained gold-film. The experimental results indicated that this new method for preparation of gold-film is simple. The obtained gold-film electrode is stable and …

The Influence Of Heat On The Measurement Of Photocurrent At The Anodic Film Of Nickel Electrode, Hang Chen, Zhi-Yu Jiang

Journal of Electrochemistry

The influence of heat on the measurement of photocurrent for nickel electrode in 1 mol/L NaOH solution was investigated by using the photocurrent, photothermal and thermal current methods. It was found that the appearance of photocurrent in potential region of -0.75~0.20 V (vs. Hg/HgO electrode) was due to the p-type semiconductor properties of Ni(OH)₂ film in which is agree with the previous report. In the Ni(OH)₂/NiOOH redox potential region, the increase of temperature at the surface of working electrode during irradiation significantly promoted the electrochemical reaction strongly. The photocurrent observed in potential region 0.20~0.57 V is mainly …

Effects Of Nickel Content And Simulated Heat Affected Zone Of 2205 Duplex Stainless Steel On Pitting Corrosion, Horng-Yih Liou, Ju-Tung Lee, Wen-Ta Tsai, Rong-Iuan Hsieh, Yeongtsuen Pan

Journal of Electrochemistry

The effects of nickel content and Gleeble simulated heat affected zone (HAZ) of 2205 stainless steel on pitting corrosion were investigated in this paper. The results showed that nickel content, ranging from 4.5 wt% to 6.5 wt% in base metal, had only a minor effect on the electrochemical polarization curves, with all E_np's and E_pp's falling in the rang of 1100~1200 mV. Comparing with the base metal, the simulated HAZ microstructure caused an increase in the anodic current density, a distinct decrease in both E_np and E_pp , and a reduction in the passive …

The Influential Factors On The Triboelectrochemical Behaviors Of The Passive Alloys, Dong-Bai Sun, Tao Li, Hong-Ying Yu, De-Jun Yang

Journal of Electrochemistry

The tribocorrosion process of Fe-Cr alloys with different Cr content in H₂SO₄ solution was investigated. The influence of applied load, friction velocity, Cr content and concentration of H₂SO₄ in solution on the triboelectrochemical behaviors of the alloys was analyzed. It is shown that applied load and friction velocity have singnificant influence on the tribocurrent density in passive region when friction process occurs on part of the surface of alloy. Increasing the corrosion resistance of alloys or decreasing the aggressive of the solution can reduce the alloy removal velocity.

Investigation Of Solution Chemistry In Crevice Of Carbon Steel And Its Anodic Polarization Behavior, Zhuo Chen, Cui-Wei Du, Bei Cao, Yin-Shun Wu, Hai Yang, Zheng-Rong Zhang

Journal of Electrochemistry

A self-made wedge-shaped simulated crevice apparatus was designed to investigate the solution chemistry in crevice of carbon steel and its anodic polarization behavior. For carbon steel with 3.5%(wt) NaCl, the change and the distribution of electrode potential, concentration of Cl^- and pH value of solution in the crevice, and the current density of metal in the crevice were measured respectively under various conditions of anodic polarization. The results showed that without polarization the metal about 2 cm away from the opening of the crevice was attacked preferentially because of its lowest free corrosion potential. The anodic polarization promoted the …

Study On The Hydrogen Permeation Through Zinc Electrodeposit, Jiang-Li Cao, Ji-Xun Wu, Yan-Ping Lu, Jie Shi

Journal of Electrochemistry

The electrochemical hydrogen-permeation technique was used to study hydrogen permeation through zinc electrodeposit with bilayer specimens of Fe substrate/zinc electrodeposit. The effect of coating thickness on hydrogen diffusion coefficient and hydrogen steady-state flux was studied. The results showed that hydrogen diffusion coefficient was approximately in the range of 10-11 cm²·s^-1 rank and zinc coating could retard hydrogen permeation. Accordingly, hydrogen steady-state flux and effective diffusion coefficient declined while the coating thickness increased.

Effect Of Inhibitor On Electrochemical Behavior Of 1cr18 Stainless Steel In Acidic Solution Under Friction, Jin-Ping Xiong

Journal of Electrochemistry

The electrochemical behavior of 1Cr18 stainless steel had been studied using a reciprocating triboelectrochemical equipment under friction in 0.2 mol/L H₂SO₄ solution with and without addition of thiourea, the frictionized surface of 1Cr18 stainless steel had been examined by the SEM, XPS and IR. The results showed that the loss rate of 1Cr18 stainless steel in the solution could be reduced by addition of thiourea. The adsorption of thiourea on the surface of 1Cr18 stainless steel prohibited the oxidization of Cr³⁺ to form Cr(Ⅵ) and formation of passive film consisting of CrO₄^2- or/and Cr(Ⅵ), …

The Magnetic Excitation Spectrum And Thermodynamics Of High-Tc Superconductors, Pengcheng Dai, Herbert A. Mook, Stephen M. Hayden, Gabriel Aeppli, Toby G. Perring, Rodney Dale Hunt, Fatih Dogan

Materials Science and Engineering Faculty Research & Creative Works

Inelastic neutron scattering was used to study the wave vector– and frequency dependent magnetic fluctuations in single crystals of superconducting YBa₂Cu₃O_6+x. The spectra contain several important features, including a gap in the superconducting state, a pseudo gap in the normal state, and the much-discussed resonance peak. The appearance of the pseudo gap determined from transport and nuclear resonance coincides with formation of the resonance in the magnetic excitations. The exchange energy associated with the resonance has the temperature and doping dependences as well as the magnitude to describe approximately the electronic specific heat near …

The Magnetic Excitation Spectrum And Thermodynamics Of High-Tc Superconductors, Pengcheng Dai, Herbert A. Mook, Stephen M. Hayden, Toby G. Perring, Gabriel Aeppli, Rodney Dale Hunt, Fatih Dogan

Materials Science and Engineering Faculty Research & Creative Works

Inelastic neutron scattering was used to study the wave vector– and frequency dependent magnetic fluctuations in single crystals of superconducting YBa₂Cu₃O_6+x. The spectra contain several important features, including a gap in the superconducting state, a pseudo gap in the normal state, and the much-discussed resonance peak. The appearance of the pseudo gap determined from transport and nuclear resonance coincides with formation of the resonance in the magnetic excitations. The exchange energy associated with the resonance has the temperature and doping dependences as well as the magnitude to describe approximately the electronic specific heat near …

Numerical Assessment Of The Effects Of Grout Characteristics On Settlement Measurements In Borehole Extensometers, Ahmed Abdel-Wahab Mohamed Bayoumi

Archived Theses and Dissertations

No abstract provided.

Impact Of Aggregate Fines On Short Term Properties Of Concrete Incorporating Water-Reducing Admixtures, Maged Maher Fakhry

Archived Theses and Dissertations

No abstract provided.

Why Does Ni Suppress Superconductivity In La1.85sr0.15cu1−Yniyo4?, Daniel Haskel, Edward A. Stern, V. Polinger, Fatih Dogan

Materials Science and Engineering Faculty Research & Creative Works

The role played by Ni impurities in destroying the superconducting state of La_2-xSr_xCuO₄ is still unclear. This is partly due to the lack of clear experimental evidence on the effect of Ni substitution upon the atomic and electronic structure of this cuprate. To provide this information, we performed Ni /(-edge polarized XAFS measure-ments on oriented powder. A special magnetic alignment geometry allowed us to measure pure ~ and aAb-polarized XAFS in identical experimental conditions. We found that the NiO6 octahedra are contracted along the t-axis by 0.16(A) relative to the CuO₆ octahedra in Lal.~sSro.~sCuO4, …

Structural Disorder And The Origin Of High-Tc Suppression In La1.875ba0.125cuo4−Δ, Daniel Haskins, Edward A. Sterns, Fatih Dogan, Arnie R. Moodenbaugh

Materials Science and Engineering Faculty Research & Creative Works

Polarized x-ray absorption fine structure (XAFS) measurements at all La, Ba and Cu sites were used to study local structural features that accompany the strong T_c suppression at x ~ 1/8 in La_2-xBa_xCuO₄. Two critical parameters regulating the strength of hole-lattice coupling in this material were determined, i.e., the di- rection and magnitude of CuO₆ octahedra local tilts. Our findings include the existence of large disorder in the magnitude of the tilt angle about its average value < 0>, with a rms (formula presented) ≈2< 0>. We suggest that this large disorder strongly …

Low-Temperature Molecular Beam Epitaxy Of Gaas: A Theoretical Investigation Of Antisite Incorporation And Reflection High-Energy Diffraction Oscillations, K. Natarajan, Rama Venkat, Donald L. Dorsey

Electrical & Computer Engineering Faculty Research

Surface dynamics dominate the incorporation of charged, As+Ga, and neutral, As0Ga, antisite arsenic, and the temporal variation of reflection high-energy electron diffraction(RHEED) intensity in the low-temperature molecular beam epitaxy of (100) gallium arsenide(GaAs). A rate equation model is proposed which includes the presence and dynamics of a physisorbed arsenic (PA) layer riding the growth surface. The PA layer dictates the incorporation and concentration of As+Ga and As0Ga. Additionally, it influences the RHEED oscillations (ROs) behavior and the RO’s dependence on its coverage through its contribution to the reflected intensity. The model results for the dependence of As+Ga and As0Ga concentrations …

Output Control Of Vertical Microcavity Light Emitting Device, James A. Lott

AFIT Patents

An improved intracavity sensor based output power control for microcavity light emitting devices. An improved phototransistor transducer is both configured and physically disposed so that it passively transmits the spurious optical energy output of the microcavity light emitting device while simultaneously generating a light determined electrical signal of easily used large magnitude that is nearly free of error. The base-collector region of the transistor is disposed with a quantum well absorbing layer and produces a signal responsive to a selected emission wavelength. The configuration of the optical energy communicating transducer is arranged so that it is improved in sensitivity and …

Cracking In Cycloaliphatic Epoxy/Aluminum Composite Electrical Bushings, Keith Alan Parker

Doctoral Dissertations

The problem of cracking in electrical apparatus bushings as a result of thermal stresses was investigated. The bushings were composed of cycloaliphatic epoxy insulators with embedded aluminum conductors. The problem is due to the difference in coefficients of thermal expansion of the two materials. A solution to the problem had been to coat the conductors before they were formed together with the epoxy insulators. The coating was assumed to prevent cracking by allowing movement between the two materials as their dimensions changed during thermal expansion and contraction. The contribution of the coating was to be established.

The hypothesis was that …

Magnetic And Mössbauer Spectral Study Of Mixed Valent La₀.₂Sr₀.₈Cu₀.₂Fe₀.₈O2.68 And Related Perovskites, Gary J. Long, Dimitri Hautot, Amitabh Mohan, Ingeborg Kaus, Harlan U. Anderson, Fernande Grandjean

Chemistry Faculty Research & Creative Works

The La_0.2Sr_0.8Cu_1-xFe_xO _3-δ perovskites are important because they are mixed electron and oxygen anion conductors and thus are able to serve as dense oxygen separation membranes. In order to better understand the mechanism for this separation a Mössbauer spectral study has been carried out to determine the ratio of iron(III) to iron(IV) in these mixed valent compounds. The Mössbauer spectra of La_0.2Sr_0.8Cu_0.2Fe_0.8O _3-δ obtained between 4.2 and 78 K reveal that its Néel temperature is ~75 K and the two well-resolved magnetic sextets observed …

Preparation And Surface Studies Of Negative Electron Affinity Semiconductors Photocathodes, Khaled A. Elamrawi

Electrical & Computer Engineering Theses & Dissertations

Fabrication of high quantum efficiency, long lifetime negative electron affinity photocathodes is important for applications such as photomultipliers, image intensifiers, electron beam lithography, electron microscopy, and polarized electron sources. The surface cleanliness of the III-V semiconductor photocathode is crucial in obtaining high photosensitivity.

GaAs(100) and InP(100) photocathodes are prepared by atomic hydrogen cleaning. The cleaning effect on the photocathode performance is discussed. The surface degradation mechanisms which reduce the photocathode lifetime are presented. The photocathode surface cleanliness, structure, and morphology are studied using reflection high-energy electron diffraction (RHEED).

Quantum efficiencies of ∼14% and 8% are obtained for GaAs and InP, …

Relationship Between Cost Of Technical Training And Cost Reduction Of Internal Defects At John Deere Waterloo Foundry, John Brackin

Graduate Research Papers

Can the cost of technical training at John Deere Waterloo Foundry pay for itself in the reduction of internal defects? This research compared training costs to the savings from reduced internal defects on Molding Unit 801 located in the John Deere Waterloo Foundry. Training was the independent variable of this research. The results of this research identified a correlation between training costs ( operational definition on page 10) and defect reduction costs. A correlation between these two established a break even point for training dollars spent.

The dependent variable was the dollar savings based on reduction of internal defects. There …

Evaluation Of Lead Anode Reactions In Acid Sulfate Electrolytes. I. Lead Alloys With Cobalt Additives, Pu Yu, Thomas J. O'Keefe

Materials Science and Engineering Faculty Research & Creative Works

Lead alloys, such as lead-calcium-tin and lead-silver, are the primary insoluble anodes used in the electrowinning of metals. While some difficulties are encountered in their use, there is no obvious replacement that is economically and technically competitive. Two of the specific problems with lead include decreased cathode purity due to incorporation from corrosion products and the relatively high overpotential which increases cell voltage. To gain an improved understanding of the fundamental behavior of lead anodes, the polarization behavior of six different alloys in sulfuric acid was evaluated. Some tests were also made with Co(II) in the acid sulfate electrolyte. Notable …

Preparation Of A Zro₂-Al₂O₃ Nanocomposite By High-Pressure Sintering Of Spray-Pyrolyzed Powders, Rajiv S. Mishra, V. Jayaram, B. Majumdar, C. E. Lesher, A. K. Mukherjee

Materials Science and Engineering Faculty Research & Creative Works

ZrO2-Al2O3 powders were synthesized by spray pyrolysis. These powders were sintered at 1 GPa in the temperature range of 700Ç1100 ÉC. The microstructural evolution and densification are reported in this paper. The application of 1 GPa pressure lowers the crystallization temperature from ~850 to 700 ÉC. Similarly, the transformation temperature under 1 GPa pressure for <>g ê a Al2O3 reduces from ~1100 to 700Ç800 ÉC range, and that for t <>ê m ZrO2 reduces from ~1050 to 700Ç800 ÉC range. It was possible to ob-tain highly-dense nanocrystalline ZrO2-Al2O3 composite at temperatures as low as 700 ÉC. The effect of high …

Electrical Characterization Of Ion-Implanted 4h-Silicon Carbide, Christian P. Morath

Theses and Dissertations

Electrical characterization has been performed on ion-implanted p-type 4H-SiC to assess the activation efficiency and implantation-related damage recrystallization with the intention of developing an implantation/annealing scheme. Low doped (Na - Nd = 5x10(exp 15)/cu cm) epitaxial p-type layers grown by MOCVD were implanted with Al or B at doses ranging from 1x10(exp 13) to 1x10(exp 14)/sq cm at room temperature or 500 deg. C. The electrical technique of Temperature Dependent Hall Effect (TDHE) indicated that Al and B act as shallow acceptors 4H-SiC with ionization energies of ^252 and ^285 meV, respectively. The highest activation efficiency for Al and B …

Electrochemical Surface Characterization Of Titanium Alloy(Ti-6al-4v), Jian-Zhong Chen, Qing-Liang Gao, Zhong-Yi Wang, Wen-Jing Xue

Journal of Electrochemistry

With its low density and high strength ratio, titanium alloy(Ti₆Al₄V) has become one of the most important materials both in the fields of aerospace and biomedical assays. Recently, titanium alloy was used as the implantation materials in human body because of its biocompatibility. The elecrochemical impedance techniques were then used to investigate the corrosion behavior of this material in hydrochloride and sulfuric acid solutions. A comparison between impedance spectra and anodic polarization over the correlated range of applied voltage confirms that AC impedance data can be used as a powerful tool for surface characterization of titanium …

Electrodeposition Of Neodymium-Iron Group Alloy Films In (P-Ch3C6H4So3)3Nd System, Peng Liu, Ye-Xiang Tong, Qi-Qin Yang, Yan-Sheng Yang

Journal of Electrochemistry

Neodymium p-toluenesulfonate was prepared and applied to the electrodepositon of neodymium-iron group alloy films. This salt has high solubility in DMF and can be dehydrated easily. Cyclic voltammograms of Pt electrode in (p-CH₃C₆H₄SO₃) 3Nd + MCl₂(M=Fe,Co,Ni) + DMF indicated that the neodymiun-iron group alloys can be elcetrodeposited from this medium, the Nd-Fe, Nd-Co and Nd-Ni films were obtained by electrolysis at constant potential. The Nd-Fe, Nd-Co and Nd-Ni films are amorphous in which the rare earth contents are in the range of 15 at%～60 at% as analyzed by XRD and …

Study Of Localized Corrosion Of Metals By Using The Electrochemical Techniques With Spatial Resolution, Chang-Jian Lin, Xiang-Dong Zhuo, Zu-De Feng, Rong-Gui Du, Zhao-Wu Tian

Journal of Electrochemistry

The electrochemical inhomogeneities at interface of metal/solution play an important and often controlling role in localized corrosion of metals. The traditional electrochemical techniques involving potential, current density or ac impedance measurements over bulk specimens can only provide average and general information of the interface. Thus, the development of in situ imaging techniques is essential for further characterizing electrochemical inhomogeneities at the metal/solution interface of localized corrosion system. The electrochemical techniques with spatial resolution,including scanning single micro electrode, scanning double micro electrodse and scanning micro chemical probes are reviewed. The effects of electrochemical inhomogeneities on the corrosion behavior, and the mechanism …

Effect Of Stress On Electrochemical Behaviour Of Various Thermal History Zones And Different Phase Structures On The Weldment For Low Alloy Steel, Yin-Shun Wu, De-Yu Liu, Bei Cao, Feng-Li Wang, Zhi Fang, Lin Zhang, Zheng-Rong Zhang, Hai Yang

Journal of Electrochemistry

The electrochemical behaviour of various thermal history zones on the weldment for steel 16Mn and also of the ferrite, pearlite in various zones was measured by use of a self-developed measuring technique for investigating the electrochemicl behaviour of single and mixed phase structures in metal materials. Especially the effect of stress on this electrochemical behaviour was investigated. The results showed that by comparison with non-stress condition, the free corrosion potential of the various thermal history zones and of the ferrite, pearlite under stress condition was shifted in negative direction, correspondingly their free corrosion current density was increased, the free corrosion …

Study On Steel Corrosion In Simulated Biofilm Environment In Seawater, Qing-Fei Wang, Jing Sui, Run-Xi Su, De-Ying Kong, Shi-Zhe Song

Journal of Electrochemistry

Biofilm is one of the main factors that influence metal corrosion in seawater environment. According to the structure and property of biofilm, a natural biopolymeric gel, calcium alginate(an extracellular biopolymer containing carboxylate functional groups) can deposite on metal surfaces to form films. Corrosion behavior of alloyed steel E2, 10CrMoAl and 18-8 stainless steel were studied in simulated biofilm environment by various electrochemical methods ,including measurements of the corrosion potential, polarization curves,galvanic current and electrochemical impedance. The results show that such an approach is informative to reveal “how” and “to what extent” biofilm can influence the metal corrosion process.