Engineering Commons^™

Sustainable Clay Brick Manufacturing: A Review Of Mechanical Properties, Firing Technologies, Emissions, And Control Strategies, I. S. Eldeeb, Ayman Bakry, Ahmed M. Nasr, E. A. Showaib

Journal of Engineering Research

The clay brick industry, a cornerstone of global construction, faces increasing pressure to mitigate its substantial environmental footprint and improve the sustainability of its practices. The energy-intensive firing process, often reliant on coal combustion, generates significant atmospheric emissions, contributing to climate change and local air pollution. Furthermore, achieving desired mechanical properties in the final product is essential for ensuring the structural integrity and longevity of buildings. This review provides a comprehensive analysis of the chemical and thermodynamic processes governing clay brick firing, exploring their influence on both emissions and the final product's mechanical strength, durability, and water absorption. We examine …

Investigating The Structure-Property Correlations Of Pyrolyzed Phenolic Resin As A Function Of Degree Of Carbonization, Ivan Gallegos, Vikas Varshney, Josh Kemppainen, Gregory Odegard

Michigan Tech Publications

Carbon-carbon (C/C) composites are attractive materials for high-speed flights and terrestrial atmospheric reentry applications due to their insulating thermal properties, thermal resistance, and high strength-to-weight ratio. It is important to understand the evolving structure-property correlations in these materials during pyrolysis, but the extreme laboratory conditions required to produce C/C composites make it difficult to quantify the properties in situ. This work presents an atomistic modeling methodology to pyrolyze a crosslinked phenolic resin network and track the evolving thermomechanical properties of the skeletal matrix during simulated pyrolysis. First, the crosslinked resin is pyrolyzed and the resulting char yield and mass density …

Validating Structural Predictions Of Conjugated Macromolecules In Espaloma-Enabled Reproducible Workflows, Madilyn E. Paul, Chris D. Jones, Eric Jankowski

Boise State University Publications and Presentations

We incorporated Espaloma forcefield parameterization into MoSDeF tools for performing molecular dynamics simulations of organic molecules with HOOMD-Blue. We compared equilibrium morphologies predicted for perylene and poly-3-hexylthiophene (P3HT) with the ESP-UA forcefield in the present work against prior work using the OPLS-UA forcefield. We found that, after resolving the chemical ambiguities in molecular topologies, ESP-UA is similar to GAFF. We observed the clustering/melting phase behavior to be similar between ESP-UA and OPLS-UA, but the base energy unit of OPLS-UA was found to better connect to experimentally measured transition temperatures. Short-range ordering measured by radial distribution functions was found to be …

Material Vulnerabilities In Aviation: A Comparative Study Of Hiduminium Rr58 In The Concorde, Siddhant Singh, Kuldeep Agarwal

Automotive and Manufacturing Engineering Technology Department Publications

The catastrophic crash of Air France Flight 4590 in the year 2000 disclosed huge flaws in the material used to manufacture the Concorde fuel tanks, Hiduminium RR58 (Aluminum 2618A). Although this alloy was selected due to its resistance to high-temperature, this research examines its thermal and mechanical vulnerabilities, especially in relation to Aluminum 7075-T3, a large-scale application of which in the Boeing 747 was widespread. By comparing tensile strength, thermal conductivity, fatigue life, and creep life, this research determines how Hiduminium RR58's over-aging susceptibility, thermal cycling degradation, and rupture due to impact were contributory causes to the disaster. The study …

Representing Structural Isomer Effects In A Coarse-Grain Model Of Poly(Ether Ketone Ketone), Chris D. Jones, Jenny W. Fothergill, Rainier Barrett, Lina N. Ghanbari, Nicholas R. Enos, Olivia Mcnair, Jeffrey Wiggins, Eric Jankowski

Boise State University Publications and Presentations

Carbon-fiber composites with thermoplastic matrices offer many processing and performance benefits in aerospace applications, but the long relaxation times of polymers make it difficult to predict how the structure of the matrix depends on its chemistry and how it was processed. Coarse-grained models of polymers can enable access to these long-time dynamics, but can have limited applicability outside the systems and state points that they are validated against. Here we develop and validate a minimal coarse-grained model of the aerospace thermoplastic poly(etherketoneketone) (PEKK). We use multistate iterative Boltzmann inversion to learn potentials with transferability across thermodynamic states relevant to PEKK …

Principles Of Advanced Manufacturing For Engineers, Xin Zhao, Walid Asad, Subha Majumder, Chenyang Zhu

Manufacturing

No abstract provided.

Synthesis And Application Of Cu-Based Ultrasmall Nanoparticles For Targeted Glioblastoma Treatment, Ryan T. Hart

Material Science and Engineering Dissertations - Archive

Glioblastoma (GBM) is a highly malignant form of brain cancer with a bleak prognosis. Current maximal treatment involves surgical resection followed by chemo-or radiotherapy. Two critical barriers make treating GBM a formidable challenge. First, the tumor's tendril-like proliferation throughout healthy brain tissue often makes complete surgical removal and conventional radiation insufficient. Second, the blood-brain barrier (BBB), which protects the brain, unfortunately also shields GBM from life-saving anti-cancer drugs. Here, we develop a radioactive nanoparticle-based therapy that directly confronts these limitations, offering a new strategy for GBM treatment.

Prostate-specific membrane antigen (PSMA) is a promising target for glioblastoma (GBM) treatment because …

Phase-Field Modeling Of A Protective Layer For The Suppression Of Dendrites In Metallic Anode-Based Rechargeable Batteries, Bharat R. Pant

Material Science and Engineering Dissertations - Archive

Metallic anodes, such as Lithium (Li) and Zinc (Zn), offer promise for the development of high-capacity rechargeable batteries. However, metallic anode-based batteries suffer from severe dendrite growth during the plating process, which poses safety hazards and accelerates capacity degradation. Experimental studies suggest that using a protective coating on the anode surface could potentially mitigate dendrite growth and prolong the battery’s life. However, there are limited theoretical studies on the inhibition effect of a protective layer on dendrite growth. Herein, we developed a phase-field model to simulate the impact of a protective layer on the plating and stripping cycle for Li …

Fabrication Of Microscale Oxide Architectures On Silicon Via A Cmos-Compatible, Deposition-Last Process, Jamal A. Brown

Material Science and Engineering Theses - Archive

This work explores the feasibility of integrating complex oxide devices on silicon using a CMOS-compatible, deposition-last approach. While previous demonstrations of this method have succeeded at larger scales, this study focuses on extending the process to microscale features, with lateral dimensions as small as two microns. The fabrication sequence begins with photolithographic patterning and reactive ion etching of the silicon substrate, followed by the deposition of a silicon nitride mask to delineate device regions. We then epitaxially grew SrTiO3 and La-doped SrTiO3 layers on top of the nitride mask via molecular beam epitaxy. Electrical transport measurements of the La:STO layer …

Engineered Biomimetic Muscle Graft For Skeletal Muscle Regeneration, Julia O. Aguirre

Bioengineering Theses - Archive

This study aims to develop a synthetic muscle graft that closely mimics the architecture, viscoelastic properties, and bio-signaling characteristics of natural skeletal muscle. By analyzing the native skeletal muscle microstructure, biochemical, and mechanical properties, we establish design parameters for a biomimetic scaffold. The engineered graft integrates tunable mechanical compliance, aligned microarchitecture, and signaling cues to promote cell recruitment, adhesion, proliferation, and maturation. To further enhance biofunctionality, an electrically conductive polymer was incorporated to improve the electrical conductivity, and the graft was loaded with the bioactive lipid signaling mediator “Prostaglandin E2” (PGE2) to support myogenesis during muscle regeneration. The grafts were …

Integrating Off-Spec Scms Into Plc Blends, George A. Qubty

Civil Engineering Theses - Archive

Off-spec supplementary cementitious materials (SCMs) remain underutilized due to variability in reactivity and non-conformance with existing standards. This study evaluates the hydration behavior and fresh-state and mechanical performance of these materials in Portland limestone cement (PLC) systems. One Class F fly ash (FA), one bottom ash (BA), and two calcined clays (HACC and LACC) were evaluated as 20 % replacements to PLC. Hydration behavior was characterized using isothermal calorimetry and thermogravimetric analysis (TGA), while fresh-state and mechanical performance were assessed through flow table, Vicat setting time, load–crack mouth opening displacement (CMOD) flexural testing, and compressive strength testing. HACC increased compressive …

Quantifying Multidimensional Effects Of Physicochemical Parameters On Pfas Adsorption Using A Hybrid Response Surface Methodology-Machine Learning Approach, Harsh V. Patel, Jazmin Green, John Park, Stephanie Luster-Teasley Pass, Renzun Zhao

Engineering Management & Systems Engineering Faculty Publications

Per- and polyfluoroalkyl substances (PFAS) contamination has posed a significant environmental and public health challenge due to their ubiquitous nature. Adsorption has emerged as a promising remediation technique, yet optimizing adsorption efficiency remains complex due to the diverse physicochemical properties of PFAS and the wide range of adsorbent materials. Traditional modeling approaches, such as response surface methodology (RSM), struggled to capture nonlinear interactions, while standalone machine learning (ML) models required extensive datasets. This study addressed these limitations by developing hybrid RSM-ML models to improve the prediction and optimization of PFAS adsorption. A comprehensive dataset was constructed using experimental adsorption data, …

Graphene-Polymer Nanocomposite For Electromagnetic Interference Shielding, Ravi Venkata Surya Sai Mogilisetti

Mechanical and Aerospace Engineering Theses - Archive

Polymers have widespread usage in most industries, such as aerospace, automotive, telecommunications, and medicine, mainly because they have a positive lightweight nature and excellent mechanical properties. One significant advantage of polymeric materials is their ability to combine nano-fillers, greatly enhancing their mechanical, electrical, and thermal properties. In the category of polymer matrices, polypropylene (PP) is notable for its low cost, ease of processing, and balanced mechanical properties. However, its relatively lower modulus and strength limit their applications in high-performance engineering. This research explores the addition of graphene into polypropylene to improve its mechanical properties and establish a conductive network for …

Reducing Friction In Machine Oil Via Cesium-Hybridized Graphene Oxide Quantum Dot Additives, Islam Gomaa, Sherief Elsoudy, Maryam Galal, Ahmed Azim

Nanotechnology Research Centre

Friction and wear are among the most common causes of energy loss and component failure in mechanical systems, accounting for around 20–30% of total global energy consumption. Conventional lubricants fail to provide consistent performance in harsh conditions due to inadequate additive dispersion, agglomeration, and restricted surface reactivity. Recent advances in nanomaterial-based lubricants have shown promise, but it remains difficult to achieve significant friction and wear reduction at low additive concentrations while preserving stability. In this study, we synthesized and tested cesium-hybridized graphene oxide quantum dots (Cs-GOQDs) as novel lubricant additives. When incorporated into machine oil at 0.1 wt%, Cs-GOQDs reduced …

Multi-Scale Computational Mechanical Modeling Of Complex Multi-Phase Materials Systems, Naji Al-Mashrafi

Theses and Dissertations--Chemical and Materials Engineering

This thesis employs finite-element–based computational methods to investigate how microstructural features and material heterogeneity govern mechanical behavior across three distinct complex systems. First, the elastic response of open-cell metallic foams is analyzed using large ensembles of model RVEs generated with the Kentucky Random Structures Toolkit (KRaSTk); finite-element homogenization reveals that effective stiffness is not dictated by relative density alone, as the skewness of ligament-length distributions—captured by the second Pearson’s coefficient—exerts a strong and previously unrecognized influence, with structures enriched in short load-bearing ligaments exhibiting consistently higher stiffness even at fixed density and connectivity. The second study examines heterogeneous polycrystalline solids …

Flexural Post-Cracking Performance Of Macro Synthetic Fiber Reinforced Super Workable Concrete Influenced By Shrinkage-Reducing Admixture, Jingjie Wei, Nima Farzadnia, Kamal H. Khayat

Civil, Architectural and Environmental Engineering Faculty Research & Creative Works

Most literature has focused on the effect of shrinkage-reducing admixture (SRA) in shrinkage mitigation resistance of concrete. This study aims to examine the impact of SRA on the efficiency of macro synthetic fibers (MSF) in enhancing the flexural post-cracking behavior of fiber-reinforced super workable concrete (FR-SWC). A comparative analysis of the influence of fiber combinations on the flexural post-cracking behavior of beams is also included. Results showed that a higher dosage of SRA, particularly at 5 % by mass of binder, had a noticeable negative impact on flexural post-cracking performance of beams while exhibiting positive effect on workability and shrinkage …

Selective Surface Activation And Flotation Of Pyrite For The Recovery Of Tellurium From Sulfide Tailings, Mulenga Mutema Chibesa

Masters Theses

Copper sulfide tailings from past and present mining operations are important secondary sources of critical elements such as tellurium (Te), a key component in cadmium–telluride photovoltaic solar cells. Characterization of tailing streams from copper porphyry (CP) ore flotation revealed that Te-bearing minerals are predominantly hosted in pyrite, which is usually depressed and discarded. Enhancing pyrite recovery is therefore a critical first step toward concentrating Te minerals for downstream extraction. However, pyrite flotation is often hindered by hydrophilic surface complexes formed during prior processing. This research investigated selective flotation of Te-bearing pyrite from CP tailings using micro flotation and bench-scale flotation, …

Phase-Field Modeling Of Rapid Solidification Processes, Nima Najafizadeh

Doctoral Dissertations

"Many advanced manufacturing processes such as additive manufacturing utilize rapid solidification of alloys, as it enables the formation of exotic non-equilibrium microstructure and thus improved properties. However, the interrelationship between the processing parameters and the resulting microstructure in rapid solidification is yet to be fully understood. We aim to investigate the microstructure evolutions during the rapid solidifications using phase-field modeling. The phase-field method assumes a diffuse interface, which avoids tracking the moving interface and hence enables efficient numerical simulations for complex microstructure evolution. A phase-field model with coupled solute-thermal diffusion and solute trapping effect is developed to investigate the rapid …

A Fault-Tolerant Exchange-Coupled Spin-Ensemble Qubit At Elevated-Temperatures, Aniruddha Chakraborty

Theses and Dissertations

This thesis introduces a novel qubit architecture: the ferromagnetic exchange-coupled spin ensemble qubit (E-qubit), designed to address the noise-induced instability. In this work, the time evolution of the ensemble’s density matrix is studied using the Liouville–von Neumann equation. To benchmark against a single-spin qubit, the gate fidelity of an E-qubit is computed in the presence of thermal noise. Coherence time is also analyzed under identical thermal condition and a linear scaling is observed with qubit size . The results show that, at 6 K , the gate fidelity error (0.7 % ) of the seven- spin ensemble is an order …

Characterization And Leaching Feasibility Studies Of Copper Flue Dust For The Recovery Of Main And Trace Metals, Fardis Nakhaei, Marek Locmelis, Lana Alagha, Michael S. Moats, Carlos Eyzaguirre, Cory Smith

Geosciences and Geological and Petroleum Engineering Faculty Research & Creative Works

Although copper smelter dust (CSD) is classified as hazardous waste, it also serves as a valuable secondary resource, offering potential for the recovery of critical elements. In this study, CSD samples were collected from the waste heat boiler (WHB) and electrostatic precipitator (ESP) units connected to the flash smelting furnace at a copper smelter. The representative samples were extensively characterized by particle size, and chemical and mineralogical analyses. Following sample characterization, leaching experiments were performed to evaluate the potential extraction of Cu, Fe, As, Zn, Pb, In, Ga, and Ge from the flue dusts. Distilled water, H2SO4, and HCl were …

Distributed Sapphire Fiber Bragg Grating-Based Thermal Profiling Of Submerged Entry Nozzles, Farhan Mumtaz, Hanok W. Tekle, Bohong Zhang, Xiaodong Li, Sunday Abraham, Bryant Mathis, Jeffrey D. Smith, Ronald J. O'Malley, Jie Huang

Electrical and Computer Engineering Faculty Research & Creative Works

This article focuses on the application of sapphire fiber Bragg gratings (FBGs) for instrumentation in submerged entry nozzles (SENs) within the steelmaking industry. The SEN is pivotal for transferring molten steel from a tundish to a mold, while preventing the infiltration of oxygen and nitrogen from the surrounding environment. Maintaining optimal flow conditions in the mold is crucial for ensuring casting process stability and maintaining high-quality steel. Sapphire FBG sensors have been instrumented in SENs to enable distributed thermal mapping for monitoring the health of the SEN. The optical sensor comprises three cascaded sapphire FBGs inscribed using femtosecond (FS) laser …

Machine Learning Modeling For Hydrolysis Recycling Of Pet Waste, Jie Li, Lanjia Pan, Hossein Abedsoltan, Hailong Wang, Taiyang Liu, Xiangzhou Yuan, Yong Sik Ok, Yin Wang

Chemical and Biochemical Engineering Faculty Research & Creative Works

The hydrolysis of polyethylene terephthalate (PET) into terephthalic acid (TPA) can efficiently recycle waste PET, but achieving high conversion efficiency through smart reaction design remains challenging. To develop a robust and accurate machine learning (ML) model for the in-depth understanding and intelligent design of PET hydrolysis, we compiled a new dataset comprising 942 data points and comprehensive information of 44 variables involved in heating type, acid/base catalyst (ABC), organic solvent (OS), co-solvent (CS), phase transfer catalyst (PTC), and operational conditions. The developed Neural Network model demonstrated the best performance in predicting PET conversion, with a testing determination coefficient (R^{2 …}

Mechanical And Thermal Characterization Of Additively Manufactured Carbon/Nylon 12 And Carbon/Peek Composites, Matik Heskin, Bradley Deuser, Thomas P. Schuman, K. Chandrashekhara, John Bayldon, Jeff Degrange, Steven Patterson, Neiko Levenhagen

Chemistry Faculty Research & Creative Works

This study explores additive manufacturing of carbon fiber-reinforced thermoplastic composites using the Composite-Based Additive Manufacturing (CBAM) process. Carbon/Nylon 12 and Carbon/PEEK composites were fabricated and evaluated through mechanical (compression, tensile, flexural, and impact) and thermal (DSC and TGA) tests. Carbon/PEEK exhibited superior mechanical performance, with 97.5% higher tensile strength, 79.8% higher elastic modulus, and 59.6% higher flexural strength compared to Carbon/Nylon 12. Thermal testing showed that Carbon/PEEK had higher thermal stability, beginning degradation at 350 °C versus 298 °C for Carbon/Nylon. These results indicate that CBAM-fabricated Carbon/PEEK composites are suitable for applications requiring high strength and temperature resistance.

Effect Of Aging Duration On The Microstructure And Corrosion Characteristics Of 17-4 Ph Stainless Steel, G. Narasinga Rao, Subrat Kumar Baral, Y. Madhavi, Sriram Vijayan, Ravikumar Dumpala

Michigan Tech Publications

Heat treatment plays a critical role in inducing key microstructural changes necessary to enhance corrosion resistance of 17-4 PH stainless steel (SS). During the process, precipitates form within the metal matrix, contributing to the strength of the martensitic steel. Inconsistencies in the literature concerning the response of 17-4PH SS to heat treatment have been noted. Therefore, this study examines the impact of aging duration on microstructural characteristics, microhardness, and corrosion resistance of material. The solution heat-treatment process consisted of heating the material to 1040 °C for one hour and rapid cooling in water. Subsequently, aging treatment was carried out at …

Semi-Quantitative Elemental Imaging Of Corrosion Products From Bioabsorbable Mg Vascular Implants In Vivo, Weilue He, Keith W. Macrenaris, Adam Griebel, Maria P. Kwesiga, Erico Freitas, Amani Gillette, Jeremy Schaffer, Thomas V. O'Halloran, Roger J. Guillory Ii

Michigan Tech Publications

While metal materials historically have served as permanent implants and were designed to avoid degradation, next generation bioabsorbable metals for medical devices such as vascular stents are under development, which would elute metal ions and corrosion byproducts into tissues. The fate of these eluted products and their local distribution in vascular tissue largely under studied. In this study, we employ a high spatial resolution spectrometric imaging modality, laser ablation inductively coupled plasma time-of-flight mass spectrometry (LA-ICP-TOF-MS) to map the metal distribution, (herein refered to as laser ablation mapping, or LAM) from Mg alloys within the mouse vascular system and approximate …

Advances In Conductive Polymer-Based Flexible Electronics For Multifunctional Applications, Md Abdus Shahid, Md Mostafizur Rahman, Md Tanvir Hossain, Imam Hossain, Md Sohan Sheikh, Md Sunjidur Rahman, Nasir Uddin, Scott W. Donne, Md Ikram Ul Hoque

Michigan Tech Publications

The rapid developments in conductive polymers with flexible electronics over the past years have generated noteworthy attention among researchers and entrepreneurs. Conductive polymers have the distinctive capacity to conduct electricity while still maintaining the lightweight, flexible, and versatile characteristics of polymers. They are crucial for the creation of flexible electronics or gadgets that can stretch, bend, and adapt to different surfaces have sparked momentous interest in electronics, energy storage, sensors, smart textiles, and biomedical applications. This review article offers a comprehensive overview of recent advancements in conductive polymers over the last 15 years, including a bibliometric analysis. The properties of …

Polymorphism And Mechanical Behavior In Hot-Pressed 3d-Printed Polyamide Composite: Effects Of Pressure And Temperature, John Barber, Patricia Revolinsky, Jimesh Bhagatji, Diego Pedrazzoli, Sergii Kravchenko, Oleksandr Kravchenko

Mechanical & Aerospace Engineering Faculty Publications

The aim of this work is to study the effect of high-temperature compaction (HTC) upon the polymorphism and the mechanical behavior of an additively manufactured (AM) carbon fiber-reinforced polyamide (PA6). Different pressure and temperature levels during HTC were tested to determine the overall effect on the mechanical behavior and material crystalline composition. Treated, carbon fiber-reinforced PA6 samples were analyzed using differential scanning calorimetry, X-ray diffraction, thermogravimetric analysis, scanning electron microscopy, and three-point bending testing. When considered with respect to as-printed samples, an HTC temperature of 190 °C combined with 80 psi pressure resulted in an increased flexural modulus and strength …

Optimizing Material Selection And Operational Conditions For Xhv Systems: Lessons From Aisi 1020 And 316l Comparative Studies, Aiman H. Al-Allaq, Md Abdullah Mamun, Matt Poelker, Abdelmageed Elmustafa

Mechanical & Aerospace Engineering Faculty Publications

In this study, AISI 1020 low-carbon steel was investigated as a cost-effective alternative to SS316L stainless steel for reaching extreme high vacuum (XHV) conditions. After being baked at 400°C, a vacuum chamber made of low-carbon steel material exhibited an outgassing rate approximately 2000 times smaller than a similar chamber made of stainless steel. Its activation energy for hydrogen diffusion (27 kJ/mol) is less than half that of stainless steel (60.3 kJ/mol), indicating more efficient hydrogen removal during bakeout. MolFlow+ simulations supported the experimental data and demonstrated the importance of system geometry optimization and minimizing stainless steel content for achieving optimal …

Mitigating Out-Of-Plane Fiber Waviness In Afp Laminates With Tow-Gaps Via Selective Placement Of Thermoplastic Veils, Ahmadreza Ravangard, Kuthan Celebi, Sergii G. Kravchenko, Oleksandr G. Kravchenko

Mechanical & Aerospace Engineering Faculty Publications

Fiber tow-gaps and overlaps formed during the Automated Fiber Placement (AFP) process pose a significant challenge by introducing non-uniform composite morphologies, often characterized by resin-rich regions and fiber waviness. These defects occur as deposited fibers sink into the gap regions during consolidation, with gap geometry determined during path planning. Such morphological inconsistencies can compromise structural reliability by initiating premature failure, particularly through localized out-of-plane waviness and resin accumulation. This study investigates the integration of high melting temperature thermoplastic veils, specifically polyetherimide (PEI), into fiber tow-gaps as a method to prevent ply sinking and reduce fiber waviness on both internal and …

Understanding Heterogeneous Nucleation In Iron Alloys From First Principles: A Review And Discussion, Semen Naumovich Lekakh

Materials Science and Engineering Faculty Research & Creative Works

Heterogeneous nucleation during solidification plays a key role in structure formation of different types of iron-based alloys, including steels and cast irons. A review summarizes the novel theoretical methods which were used to understand the nature of heterogeneous nucleation in iron-based alloys. An ab initio simulation of atomic adsorption was used to predict the activity of heterogeneous nuclei, and the thermodynamic methods were applied to design conditions for desired precipitate formation in the iron melts. A high-resolution TEM study of individual nucleus and statistics of nuclei family, obtained from an automated SEM/EDX analysis, illustrates a possibility to design processes of …