Engineering Commons^™

Amorphous Phase Formation In Mechanically Alloyed Fe-Based Systems., Satyajeet Sharma

Electronic Theses and Dissertations

Bulk metallic glasses have interesting combination of physical, chemical, mechanical, and magnetic properties which make them attractive for a variety of applications. Consequently there has been a lot of interest in understanding the structure and properties of these materials. More varied applications can be sought if one understands the reasons for glass formation and the methods to control them. The glass-forming ability (GFA) of alloys can be substantially increased by a proper selection of alloying elements and the chemical composition of the alloy. High GFA will enable in obtaining large section thickness of amorphous alloys. Ability to produce glassy alloys …

Activation Energy Of Surface Diffusion And Terrace Width Dynamics During The Growth Of In (4×3) On Si (100) - (2×1) By Femtosecond Pulsed Laser Deposition, M. A. Hafez, H. E. Elsayed-Ali

Electrical & Computer Engineering Faculty Publications

The nucleation and growth of indium on a vicinal Si (100) - (2×1) surface at high temperature by femtosecond pulsed laser deposition was investigated by in situ reflection high energy electron diffraction (RHEED). RHEED intensity relaxation was observed for the first ∼2 ML during the growth of In (4×3) by step flow. From the temperature dependence of the rate of relaxation, an activation energy of 1.4±0.2 eV of surface diffusion was determined. The results indicate that indium small clusters diffused to terrace step edges with a diffusion frequency constant of (1.0±0.1) × 10¹¹ s^-1. The RHEED specular …

Nonthermal Laser-Induced Formation Of Crystalline Ge Quantum Dots On Si(100), M. S. Hegazy, H. E. Elsayed-Ali

Electrical & Computer Engineering Faculty Publications

The effects of laser-induced electronic excitations on the self-assembly of Ge quantum dots on Si (100) - (2×1) grown by pulsed laser deposition are studied. Electronic excitations due to laser irradiation of the Si substrate and the Ge film during growth are shown to decrease the roughness of films grown at a substrate temperature of ∼120 °C. At this temperature, the grown films are nonepitaxial. Electronic excitation results in the formation of an epitaxial wetting layer and crystalline Ge quantum dots at ∼260 °C, a temperature at which no crystalline quantum dots form without excitation under the same deposition conditions. …

Evaluation Of Su8 And Ruthenium Oxide Materials For Microfluidic Devices, Margaret Theresa Audrain

Masters Theses

"This thesis investigates two materials, SU8 photoresist and RuO₂, for possible incorporation into a self-calibrating microfluidic biosensor. The negative, epoxy based photoresist SU8 has been widely used in the fabrication of micro-electro-mechanical systems (MEMS) devices. This is due to its many desirable features that make it a suitable material for a wide variety of MEMS applications. The effects cross-linking (exposure dose) and bonding time have on bond strength and plasma modification of the SU8 surface were investigated as well as the bond strength of etched SU8. It was shown that adhesive bonding was an effective method of bonding, with bond …

Recovery Of Materials From Recycling Of Spent Furnace Linings, Phani Krishna Angara Raghavendra

Masters Theses

"The objective of this research study is to evaluate the technical feasibility of liberating metal entrapped in the spent melting furnace linings obtained from a non-ferrous metal producer and develop an economic technique to recycle all of the materials presently landfilled. Five to six million pounds of spent melting furnace linings are landfilled annually from this non-ferrous producer"--Abstract, page iii.

Synthesis Of Nanostructured Conducting Polymers And Their Application As Gas Sensors, Zhe-Fei Li

Masters Theses

"A single-step, bottom-up technique based on a nanostructured conducting polymer has been used to fabricate sensors. Small amounts of aqueous solutions of aniline, a dopant, and an oxidant were placed on an interdigitated electrode array. Ultraviolet (UV)-irradiation of the solutions enhanced polymerization, yielding a highly porous film of polyaniline nanofibers with mean diameters of around 100 nm and lengths on the order of 1 µm. Solutions that were not irradiated formed bulk-like polyaniline films. Nanofibers and bulk polyaniline sensors were exposed to vapors in an argon carrier gas including: chloroform, a weak proton donor; toluene, a vapor that causes polymer …

Thermal Characterization And Vibration Of Solder Alloys, Brandon Lee Brinkmeyer

Masters Theses

"Recent legislation and growing environmental concerns have forced the electronics industry to discontinue the use of tin-lead (SnPb) solder. Although the legislation did not directly affect aerospace and defense industries, future transitions to lead-free (LF) solders are inevitable. Differences exist between these high reliability systems and consumer electronics, first of which is a very small production rate and a long life cycle which often leads to repair or rework procedures which introduce the potential for mixing of SnPb and LF solder. In this study, Sn-3Ag-0.5Cu (SAC305) was mixed with Sn-37Pb solder in amounts of 0, 25, 50, 75, and 100 …

Elevated Temperature Behavior Of A Magnesium Based Bulk Metallic Glass, Neal C. Ross

Masters Theses

"Bulk metallic glasses are a new material set that possess interesting and exceptional engineering properties. Their study has been a major focus of research in metallurgy since the early 1990s, and recently their properties have led to application in specialized applications. Limitations including material cost, maximum attainable cast diameters, and high density have prevented the widespread use of these materials. In particular, the high density of most bulk metallic glasses has significantly reduced their appeal to the aerospace community. In an effort to overcome this, research is being performed on producing lower density glass forming systems based on magnesium and …

Thermal Degradation And Aging Of High Temperature Piezoelectric Ceramics, Sunil W. Gotmare

University of Kentucky Master's Theses

Piezoelectric materials have numerous applications like high temperature accelerometers, pressure, flow and NDT transducers, acoustic emission, ultrasonic cleaning, welding, high voltage generators, medical therapy etc. The commonly used piezoelectric material, PZT continues to dominate the commercial market for piezoelectric actuators applications. The primary limitations of PZT are the lower Curie temperature T_C <390^oC and rapid thermal degradation avobe 200^oC.

Continuing efforts are focused on the development of piezoelectric materials suitable for high temperature applications >200^oC. These materials will be very useful for making sensors for space exploration, oil and geothermal well drilling tools, oil …

Composition Dependence Of The In-Plane Cu-O Bond-Stretching Lo Phonon Mode In Y⁢Ba2⁢Cu3⁢O6+X, Ferenc Stercel, Takeshi Egami, Herbert A. Mook, Mohana Yethiraj, J-H Chung, M. Arai, C. Frost, Fatih Dogan

Materials Science and Engineering Faculty Research & Creative Works

An inelastic pulsed neutron scattering study was performed on the dependence of the dispersion and spectral intensity of the in-plane Cu-O bond-stretching LO phonon mode on doped charge density. The measurements were made in the time-of-flight mode with the multiangle position sensitive spectrometer of the ISIS facility on single crystals of Y⁢Ba₂⁢Cu₃⁢O_6+x (x=0.15, 0.35, 0.6, 0.7, and 0.95). The focus of the study is the in-plane Cu-O bond-stretching LO phonon mode, which is known for strong electron-phonon coupling and unusual dependence on composition and temperature. It is shown that the dispersions for the samples with …

Thickness Effects On The Ac And Dc Electrical Behavior Of Rf-Sputtered Batio3 Nano-Capacitors With Pt And Ni Electrodes, James N. Reck, Matthew O'Keefe, Fatih Dogan

Materials Science and Engineering Faculty Research & Creative Works

Nanoscale BaTiO₃ capacitors were deposited on Si wafers at dielectric thicknesses of approximately 25, 50, 100, and 200 nm using RF-magnetron sputtering with either 25 nm thick Ni or Pt electrodes. Multiple DC and AC tests were conducted on these devices to determine the effects of BaTiO₃ thickness on the measured dielectric behaviors. All films were observed to have non-linear responses for resistance, permittivity, and loss with respect to dielectric thickness. The permittivity was found to follow a standard dead layer model behavior with measured values ranging from approximately 350 to 1700 for Ni electrodes and approximately 100 …

Progress In Effect Of Jominy End Quench On The Microstructure And Mechanical Properties Of Cast Aluminum Alloys, Qingcai Liu, C. Lu, Joseph William Newkirk

Materials Science and Engineering Faculty Research & Creative Works

In this review, the current knowledge related to the relationship between the heat treatment process and the microstructure and mechanical properties of A356 aluminum alloys are summarized. The review also examines the use of the Jominy end quench (JEQ) specimen and its application to the examination of the effects of quench rate and subsequent processing. Using the design of experimental methods combined with the Jominy end quench technique, desired changes in microstructure and mechanical properties of alloys can be obtained. So, the experimental technique of the Jominy end quench was concerned in this work.

Oligo(Vinylidene Fluoride) Langmuir-Blodgett Films Studied By Spectroscopic, Rafal Korlacki, J. Travis Johnston, Jihee Kim, Stephen Ducharme, Daniel W. Thompson, Vladimir M. Fridkin, Zhongxin Ge, James M. Takacs

Stephen Ducharme Publications

Thin films of amphiphilic vinylidene fluoride oligomers prepared by Langmuir–Blodgett deposition on silicone substrates were investigated by comparing experimental and theoretical mid-infrared (IR) spectra. The experimental spectra were obtained using infrared spectroscopic ellipsometry. Theoretical spectra were calculated using density functional theory. Excellent correspondence of major IR bands in both data sets shows that the molecular backbone is oriented with the long axis normal to the substrate plane. This is in contrast to poly vinylidene fluoride[1] LB films, in which the polymer chains are parallel to the substrate.

Enhanced Dielectric Properties In Single Crystal-Like Bifeo3 Thin Films Grown By Flux-Mediated Epitaxy, S.-H. Lim, M. Murakami, J. H. Yang, S.-Y. Young, Jason R. Hattrick-Simpers, M. Wuttig, L. G. Salamanca-Riba, I. Takeuchi

Faculty Publications

We have fabricated single crystal-like BiFeO₃ (BFO) thin films by flux-mediated epitaxy using pulsed laser deposition(PLD). The Bi–Cu–O flux composition and its thickness were optimized using composition spread, thickness gradient, and temperature gradient libraries. The optimized BFO thin films grown with this technique showed larger grain size of ∼2μm and higher dielectric constant in the range of 260–340 than those for standard PLD grown films. In addition, the leakage current density of the films was reduced by two orders of magnitude compared to that of standard PLD grown films.

The Effects Of Nanoscale Disorder On The Paramagnetic To Ferromagnetic Transition In Melt-Spun Gadolinium And Gadolinium Iron Alloys, Justin Gary Bohnet

Honors Program Theses

As nanoscale science continues to flourish, scientists strive to understand how structure and order (or disorder) on the nanoscale contribute to macroscopic properties, such as magnetism. This study examines alloys of gadolinium and iron that have been nanostructured through the process of melt-spinning. The result was a two-part system consisting of small (~70 nm) gadolinium grains surrounded by an amorphous gadolinium and iron matrix. Measurements of the samples’ DC magnetization and AC susceptibility were performed. By looking at the paramagnetic to ferromagnetic transition in the materials, the critical exponents were obtained and used to classify and understand how the addition …

Preparation And Characterization Of (Gesbte)) Semiconductors For Phase-Change Optical Storage, Hessa Ali Humeid Al-Shamisi

Theses

In the last decade, the phase change optical recording based upon chalcogenide glasses has advanced remarkably at full-scale commercial applications in the form of rewritable compact disks (CD-RWs). The principle of phase-change optical recording is based on a thermally induced reversible transformation between amorphous and crystalline phases. The search for recording materials possessing fast crystallization rate and long data retention has been pursued. Research results have revealed that Ge-Sb-Te compounds exhibit fast crystallization, which has been explained in terms of their single-phase structure.

In the present work, electrical properties of Ge-Sb-Te thin films using Impedance Spectroscopy, Current-Voltage, and Capacitance-Voltage techniques …

A New Method Of Synthesizing Black Birnessite Nanoparticles: From Brown To Black Birnessite With Nanostructures, Shizhi Qian, Marcos A. Cheney, Pradip K. Bhowmik, Sang W. Joo, Wensheng Hou, Joseph M. Okoh

Mechanical Engineering Faculty Research

A new method for preparing black birnessite nanoparticles is introduced. The initial synthesis process resembles the classical McKenzie method of preparing brown birnessite except for slower cooling and closing the system from the ambient air. Subsequent process, including wet-aging at 7◦C for 48 hours, overnight freezing, and lyophilization, is shown to convert the brown birnessite into black birnessite with complex nanomorphology with folded sheets and spirals. Characterization of the product is performed by X-ray diffraction (XRD), transmission electron microscopy (TEM), high-resolution transmission electron microscopy (HRTEM), thermogravimetric analysis (TGA), and N2 adsorption (BET) techniques. Wet-aging and lyophilization times are shown to …

Fundamental And Applied Experimental Investigations Of Corrosion Of Steel By Lbe Under Controlled Conditions: Kinetics, Chemistry Morphology, And Surface Preparation, John Farley, Allen L. Johnson

Transmutation Sciences Materials (TRP)

Advanced nuclear processes and facilities (e.g., transmutation of nuclear waste, fast reactors, and spallation neutron sources) impose special demands on materials, which must withstand high temperatures, high radiation fields, and chemical corrosion. Proposed schemes for transmuting nuclear waste require a nonmoderating coolant such as lead-bismuth eutectic (LBE) or liquid sodium. While LBE corrodes most steels, small amounts of oxygen in the LBE greatly reduces the corrosion rate, and could ideally re-grow a damaged oxide layer in situ. The protective oxide layer would thus be self-healing. However, a fundamental understanding of the role of oxygen and passivating oxide layers is presently …

Effect Of Silicon Content On The Corrosion Resistance And Radiation-Induced Embrittlement Of Materials For Advanced Heavy Liquid Metal Nuclear Systems, Ajit K. Roy

Transmutation Sciences Materials (TRP)

The beneficial effects of Si on both the metallurgical and corrosion properties of Cr-Mo steels have previously been demonstrated at UNLV. Therefore, additions of Si ranging from 0.5-2.0 weight percent (wt%) was attempted in this investigation to explore Si effect on both the high temperature tensile properties and corrosion behavior of T91 grade steel. Corrosion studies in the presence of molten LBE could not be performed due to a lack of proper experimental facilities at UNLV. Therefore, detailed corrosion studies involving Si-containing T91 grade steels were performed in an aggressive aqueous solution of acidic pH. Further, significant efforts have been …

Theoretical Modeling Of Protective Oxide Layer Growth In Non-Isothermal Lead Alloy Coolant Systems, Yitung Chen, Taide Tan, Jinsuo Zhang, Jichun Li

Transmutation Sciences Materials (TRP)

In advanced nuclear energy systems, lead alloys emerge as strong candidates for transmutation and advanced reactor systems as nuclear coolants and spallation neutron targets. However, it is widely recognized that corrosion of materials caused by lead alloys presents a critical barrier to their industrial use. A few experimental research and development projects have been set up by different groups such as at Los Alamos National Laboratory to study the corrosion phenomena in their test facilities and to develop mitigation techniques and materials. One of the central or main techniques under development is to use active control of oxygen thermodynamic activity …

Development Of Nanostructure Based Corrosion-Barrier Coatings On Steel For Transmutation Applications, Biswajit Das

Transmutation Sciences Materials (TRP)

Advanced transmutation systems require structural materials that are able to withstand high neutron fluxes, high thermal cycling, and high resistance to chemical corrosion. The current candidate materials for such structures are ferritic and ferritic-martensitic steels due to their strong resistance to swelling, good microstructural stability under irradiation, and the retention of adequate ductility at typical reactor operating temperatures.

In parallel, lead-bismuth eutectic (LBE) has emerged as a potential spallation target material for efficient production of neutrons, as well as a coolant in the accelerator system. While LBE has excellent properties as a nuclear coolant, it is also highly corrosive to …

Final Report: Phase Stability And Segregation In Alloy 22 Base Metal And Weldments, Jeffrey Lacombe

Publications (YM)

At the outset of this project, the design of the waste disposal containers relied heavily on encasement in a multi-layered container, featuring a corrosion barrier of Alloy 22, a Ni-Cr- Mo-W based alloy with excellent corrosion resistance over a wide range of conditions. The fundamental concern from the perspective of the Yucca Mountain Project, however, was the inherent uncertainty in the (very) long-term stability of the base metal and welds. Should the properties of the selected materials change over the long service life of the waste packages, it was conceivable that the desired performance characteristics (such as corrosion resistance) would …

Interaction Between Metal Fission Products And Triso Coating Materials, Clemens Heske

Fuels Campaign (TRP)

This project focuses on the chemical bonding and interface formation of metal fission products with the coating materials used in tri-isotropic (TRISO) fuel particles for gas-cooled reactors. By combining surface- and bulk-sensitive spectroscopic and microscopic methods, intermediate chemical phases at the interface, intermixing/diffusion behavior, and the electronic interface structure for different coating materials and metals are examined.

In detail, the project studies the interface formation of Pd, Cs, and Ag with SiC and pyrolytic carbon. Using SiC single crystals and highly-ordered pyrolytic carbon (HOPG) as substrates, interfaces are prepared under controlled conditions in an ultra-high vacuum environment and are studied …

Dissolution, Reactor, And Environmental Behavior Of Zro2-Mgo Inert Fuel Matrix, Kenneth Czerwinski

Fuels Campaign (TRP)

This project will examine inert fuels containing ZrO₂ and MgO as the inert matrix. Ceramics with this inert matrix, Ce, U and eventually Pu will be synthesized and examined. While the Advanced Fuel Cycle Initiative focus is on inert fuels with Pu as the fissile component, this task will perform initial laboratory experiments with Ce and U. The initial work with Ce will be performed early in the project with results used as a basis for U studies. Reactor physics calculations will be used to examine suitable quantities of burnable poisons from the candidate elements Gd, Er, or Hf. …

Mse News 2008, Department Of Materials Science And Engineering, Michigan Technological University

Department of Materials Science and Engineering Annual Reports

Table of Contents

• MSE Department Welcomes New Assistant Professor
• Lee Retires
• Peter Moran
• Michigan Tech Honors Levy for Research Efforts in Magneto-Photonics
• Student Accomplishments
• Awards and Honors
• Alumni News

Modeling And Simulations Of Diphasic Composites For Development Of High Energy Density Dielectrics, Sandeep K. Patil

Doctoral Dissertations

"This research is focused on diphasic dielectric composites for high energy density storage applications in pulsed power and power distribution systems. Composite materials are particularly attractive because they can synergistically combine high permittivity with high breakdown strength of the individual phases. Energy density, which captures permittivity and dielectric breakdown strength as vital material parameters, dominates this research challenge. Avenues for increasing the effective permittivity and breakdown strength may be found by gaining fundamental understanding of the response of diphasic dielectrics to an applied electric field. Improved understanding of these characteristics will ultimately lead to dielectrics with increased energy storage densities. …

Densification, Microstructure, And Mechanical Properties Of Zirconium Diboride Based Ultra-High Temperature Ceramics, Sumin Zhu

Doctoral Dissertations

"The first part of this dissertation was aimed at studying the densification of ZrB₂ ceramics by pressureless sintering techniques. Various processes have been applied to coat ZrB₂ powders with polymer precursors, which were used to produce C after charring. After sintering at 1900⁰C, relative density increased of ~70% for uncoated ZrB₂ to >99% for ZrB₂ coated with at least 1.0 wt% C. Thermodynamic analysis suggested that C reacted with and removed oxide impurities (ZrO₂ and B₂O₃) that were present on the ZrB₂ particle surfaces, which promoted densification by minimizing grain coarsening"--Abstract, page iv.

Design Issues For Therapeutic Ultrasound Angioplasty Waveguides, Declan Noone, Graham Gavin, Garrett Mcguinness

Conference Papers

Therapeutic ultrasound angioplasty is a new minimally invasive cardiovascular procedure for disrupting atherosclerotic lesions. Mechanical energy is transmitted in the form of ultrasound waves via long, flexible wire waveguides navigated to the lesion site through the vascular system. The underpinning principle of this technology is that plaque may be disrupted through a combination of direct contact ablation, pressure waves, cavitation and acoustic streaming, which all depend on the amplitude and frequency of displacements at the distal tip of the wire waveguide. This study identifies a number of key design issues for clinical devices of this type, and describes testing procedures …

Friction Stir Spot Welding Of Aluminum Alloys, Wei Yuan

Masters Theses

"Efforts to reduce vehicle weight and improve safety performance have resulted in increased application of light-weight aluminum alloys and a recent focus on the weldability of these alloys. Friction stir spot welding (FSSW) is a solid state welding technique (derivative from friction stir welding (FSW), which was developed as a novel method for joining aluminum alloys). During FSSW, the frictional heat generated at the tool-workpiece interface softens the surrounding material, and the rotating and moving pin causes material flow. The forging pressure and mixing of the plasticized material result in the formation of a solid bond region. The present work …

Friction Stir Form Welding Of Aluminum Structures, Kamini Ashokkumar Gupta

Masters Theses

"The objective of this work was to demonstrate the applicability of friction stir welding (FSW) technology in the automotive industry. Increasing fuel prices, stringent safety and emission norms are continuously striving automakers to make lightweight, fuel efficient vehicles. Automotive engineers are researching for alternate materials in order to meet weight savings targets. Use of aluminum in place of steel in a car has been increasing for making lightweight vehicles. Conventional welding and spot welding are used as preferred joining methods by the automotive industry. However, if aluminum is used in place of steel alternate joining methods are to be researched. …