Engineering Commons^™

Fabrication And Characeterization Of Granular Magnetic Gold Nanoparticles, Rishi Wadhwa

Material Science and Engineering Theses - Archive

In recent years, gold and magnetic nanoparticles have showed great potential in biomedical applications. Magnetic nanoparticles can be used in both in- vivo and in-vitro applications such as drug and gene delivery, hyperthermia treatment of cancer, MRI contrast enhancement, cell labeling and magnetic separation. Due to the surface plasmon resonance effect (SPR), gold nanoparticles strongly absorb and scatter visible and infrared light in resonance with SPR. They have been exploited for bioimaging and photothermal therapy applications. This is why different sizes and shapes of Au nanoparticles exhibit different colors.In this thesis, we are investigating a new type of nanoparticles, granular …

Prevention Of Environmentally Induced Degradation In Carbon/Epoxy Composite Material Via Implementation Of A Polymer Based Coati, Bradford Tipton

Electronic Theses and Dissertations

As the use of fiber reinforced plastics increases in such industries as aerospace, wind energy, and sporting goods, factors effecting long-term durability, such as environmental exposure, are of increasing interest. The primary objectives of this study were to examine the effects of extensive environmental exposure (specifically UV radiation and moisture) on carbon/epoxy composite laminate structures and to determine the relative effectiveness of polymer-based coatings at mitigating degradation incurred due to such exposure. Carbon/epoxy composite specimens, both coated and uncoated, were subjected to accelerated weathering in which prolonged outdoor exposure was simulated by controlling the radiation wavelength (in the UV region), …

Linking The Structure And Mechanical Behavior Of Nanoporous Gold, Ye Sun

University of Kentucky Doctoral Dissertations

The structure of nanoporous gold (np-Au) provides a very limited volume for deformation to occur, and thus offers an opportunity to study the role of defects such as dislocations in nanoscale metal volumes. A practical goal is to understand mechanical properties of np-Au so that it can be can produced in stable form, for use in applications that require some mechanical integrity. Bulk and thin film np-Au have been fabricated and studied here.

Bulk np-Au was prepared by electrochemically dealloying Au-Ag alloys with 25 and 30 at.% Au. In the lower Au content material, cracks always formed during dealloying. When …

Probing And Tuning The Size, Morphology, Chemistry And Structure Of Nanoscale Cerium Oxide, Satyanarayana Kuchibhatla

Electronic Theses and Dissertations

Cerium oxide (ceria)-based materials in the nanoscale regime are of significant fundamental and technological interest. Nanoceria in pure and doped forms has current and potential use in solid oxide fuel cells, catalysis, UV- screening, chemical mechanical planarization, oxygen sensors, and bio-medical applications. The characteristic feature of Ce to switch between the +3 and + 4 oxidation states renders oxygen buffering capability to ceria. The ease of this transformation was expected to be enhanced in the nanoceria. In most the practical scenarios, it is necessary to have a stable suspension of ceria nanoparticles (CNPs) over longer periods of time. However, the …

N Multilayer Thin Film Reactions To Form L10 Fept And Exchange Spring Magnets, Bo Yao

Electronic Theses and Dissertations

FePt films with the L10 phase have potential applications for magnetic recording and permanent magnets due to its high magnetocrystalline anisotropy energy density. Heat treatment of n multilayer films is one approach to form the L10 FePt phase through a solid state reaction. This thesis has studied the diffusion and reaction of n multilayer films to form the L10 FePt phase and has used this understanding to construct exchange spring magnets. The process-structure-property relations of n multilayer films were systematically examined. The transmission electron microscopy (TEM) study of the annealed multilayers indicates that the Pt layer grows at the expense …

Development And Application Study Of Nanoscale Thin Film Materials And Polymer Nanocomposites, Hui Chen

Electronic Theses and Dissertations

This dissertation demonstrated that the manipulation of substances at the molecular or nanometer level can lead to the discovery and development of new materials with interesting properties and important applications. Chapter 1 describes the development of a nanoscale molecular thin film material for corrosion protection. By using a self-assembled monolayer film with a thickness of only about 1 nanometer as a linkage, a covalent bonding was achieved between a polyurethane top coating and an aluminum alloy substrate. This covalent bonding between polymer top coating and the aluminum alloy substrate significantly improved the corrosion resistance of the substrate. Chapter 2 and …

Effect Of Composition, Morphology And Semiconducting Properties On The Efficiency Of Cuin1-Xgaxse2-Ysy Thin-Film Solar Cells Pre, Sachin Kulkarni

Electronic Theses and Dissertations

A rapid thermal processing (RTP) reactor for the preparation of graded CuIn1-xGaxSe2-ySy (CIGSeS) thin-film solar cells has been designed, assembled and is being used at the Photovoltaic Materials Laboratory of the Florida Solar Energy Center. CIGSeS films having the optimum composition, morphology, and semiconducting properties were prepared using RTP. Initially films having various Cu/(In+Ga) ratios were prepared. In the next step selenium incorporation in these films was optimized, followed by sulfur incorporation in the surface to increase the bandgap at the surface. The compositional gradient of sulfur was fine-tuned so as to increase the conversion efficiency. Materials properties of these …

Application Of Polyelectrolyte Multilayers For Photolithographic Patterning Of Diverse Mammalian Cell Types In Serum Free Medium, Vipra Dhir

Electronic Theses and Dissertations

Integration of living cells with novel microdevices requires the development of innovative technologies for manipulating cells. Chemical surface patterning has been proven as an effective method to control the attachment and growth of diverse cell populations. Patterning polyelectrolyte multilayers through the combination of layer-by-layer self-assembly technique and photolithography offers a simple, versatile and silicon compatible approach that overcomes chemical surface patterning limitations, such as short-term stability and low protein adsorption resistance. In this study, direct photolithographic patterning of PAA/PAAm and PAA/PAH polyelectrolyte multilayers was developed to pattern mammalian neuronal, skeletal and cardiac muscle cells. For all studied cell types, PAA/PAAm …

High Performance Zno Varistors Prepared From Nanocrystalline Precursors For Miniaturised Electronic Devices, Suresh Pillai, Declan Mccormack, John Kelly, Raghavendra Ramesh

Articles

An industrially viable solution-based processing route using minimal amounts of solvent has been used to prepare bulk quantity nanopowders (average particle size 15.3 nm) for the fabrication of ZnO varistors. The xerogels, calcined powders and sintered materials were fully characterised. The preparation of varistors from nanopowders has been optimised by studying the effect of temperature on grain growth, densification and breakdown voltage. The varistors are prepared by sintering at 1050 C for 2 hours, a temperature that is significantly lower than that used in the current industrial process. Highly dense varistor discs prepared from the sintered material produce devices, with …

Nano Quasicrystal Formation And Local Atomic Structure In Zr––Pd And Zr––Pt Binary Metallic Glasses, Junji Saida, Takashi Sanada, Shigeo Sato, Muneyuki Imafuku, Chunfei Li, Akihisa Inoue

Center for Electron Microscopy and Nanofabrication Publications and Presentations

Formation of the nanoscale icosahedral quasicrystalline phase (I-phase) in the melt-spun Zr₇₀Pd₃₀ and Zr₈₀Pt₂₀ binary metallic glasses were reported. Local atomic structure in the glassy and quasicrystal (QC)-formed states were also analyzed by XRD and EXAFS measurements in order to investigate the formation mechanism of QC phase. The distorted icosahedral-like local structure can be identified around Zr atom in the Zr₇₀Pd₃₀ metallic glass. In the QC formation process, a change of local environment around Zr is detected, in which the approximately one Zr atom substitutes for one Pd atom. In contrast, …

Growth Rate Calculations For Epitaxially Grown Thin Films, D. Bullock

Journal of the Arkansas Academy of Science

No abstract provided.

Anomalous Magnetic Ordering In Prba₂Cu₄O₈ And Cmba₂Cu₃O₇, H. A. Blackstead, M. P. Smylie, William B. Yelon, Qingsheng Cai, Mehmet Kahveci

Physics Faculty Research & Creative Works

A review of temperature-dependent magnetization data for nonsuperconducting PrBa2Cu4O8 and CmBa2Cu3O7 suggests that the failure of each to superconduct is related to the presence of Pr and Cm on their respective Ba sites. This defect is manifested, in each case, by short c-axis lattice parameters and anomalous high-temperature magnetic ordering which has been incorrectly attributed to ordering of the entire magnetic sublattice. Instead, it is shown that the anomalous high-temperature ordering as seen in the magnetization data is consistent with the ordering of magnetic ions substituted on the Ba site.

Thermal Analysis Of Adsorbed Poly(Vinyl Acetate) On Silica, Boonta Hetayothin, Frank D. Blum

Chemistry Faculty Research & Creative Works

The physical properties of polymers at interfaces can be quite different from those in bulk due to the interaction between the absorbed polymer and the surface. This phenomenon can be probed through the dynamic behavior of the polymer chains at the interface which can be experimentally probed by techniques such as nuclear magnetic resonance spectroscopy (NMR),1 viscoelasticity, and calorimetry. At the polymer-air interface, polymer chains have more flexibility than those at the polymer-substrate interface. On the other hand, at the silica-polymer interface, where chains are more restricted on the surface, a higher glass transition temperature (Tg) results as compared with …

Dynamics Of Adsorbed Pma-D₃ - Effect Of Substrate, Frank D. Blum, Burak Metin, Macduff O. Okuom

Chemistry Faculty Research & Creative Works

In the last few years, our group has focused much of our attention on studying the dynamics of polymers adsorbed at interfaces. Much of our work, to date has been on labeled poly(vinyl acetate)-d3 (PVAc-d3)1 and poly(methyl acrylate)-d3 (PMA-d3)2 on silica. We have been able to probe the effects of adsorbed amount,3 molecular mass,4,5 and the effect of overlayer.6 These studies have provided a view of the adsorbed polymer consistent with a motional gradient in the layer with the more mobile segments being those at the air-polymer interface and the less-mobile segments at the substratepolymer interface. However, we have not …

Characterization And Glass Formation Of Jsc-1 Lunar And Martian Soil Simulants, C. S. Ray, Sabhayu Sen, Signo Tadeu Dos Reis

Materials Science and Engineering Faculty Research & Creative Works

The space exploration mission of NASA requires human and robotic presence for long duration beyond the low earth orbit (LEO), especially on Moon and Mars. Developing a human habitat or colony on these planets would require a diverse range of materials, whose applications would range from structural foundations, (human) life support, (electric) power generation to components for scientific instrumentations. A reasonable and cost-effective approach for fabricating the materials needed for establishing a self-sufficient human outpost would be to primarily use local (in situ) resources on these planets. Since ancient times, glass and ceramics have been playing a vital role on …

Glass Transition Behavior Of Poly(Methyl Acrylate) End-Grafted By Atrp To Amorphous Silica, Manikantan B. Nair, Frank D. Blum

Chemistry Faculty Research & Creative Works

Ultra-thin polymer films attached to solid substrates (supported films) have attracted significant interest in recent years. Supported films are used in the design of advanced materials like photoresists, lubricants and other electronic devices. Glass transition temperatures (Tgs) of supported polymer films have also been of significant interest. The Tg has been shown to depend on the thickness of the polymer film on the surface and the inherent nature of the surface. The effect of end-grafting of a polymer chain to a surface, on the Tg of the polymer has been studied previously.1 Reports on the study of glass transition behaviors …

Damping Of Magnetorheological Elastomers, Lin Chen

Articles

The damping property of magnetorheological (MR) elastomers is characterized by a modified dynamic mechanical-magnetic coupled analyzer. The influences of the external magnetic flux density, damping of the matrix, content of iron particles, dynamic strain and driving frequency on the damping properties of MR elastomers were investigated experimentally. The experimental results indicate that the damping properties of MR elastomers greatly depend on the interfacial slipping between the inner particles and the matrix. Different from general composite materials, the interfacial slipping in MR elastomers is affected by the external applied magnetic field.

Thin Film Techniques For The Fabrication Of Nano-Scale High Energy Density Capacitors, James N. Reck

Doctoral Dissertations

Dielectric thin films of either TiO₂ or BaTiO₃ were sputtered in O₂/Ar plasmas on Si wafers to thicknesses ranging from approximately 25 to 200 nm with patterned Ni or Pt electrodes sputtered in Ar plasmas at thicknesses from about 20 to 250 nm to form nano-capacitors. Statistical design of experiments (DOE) was used to determine the effects of the deposition power, plasma composition, and deposition temperature on the measured electrical properties of the nano-capacitors. Additional tests to determine the effects of the dielectric and electrode thickness on the measured dielectric responses of the devices were also undertaken. Characterization was performed …

Geological Sequestration Of Carbon Dioxide By Hydrous Carbonate Formation In Steelmaking Slag, C. Hank Rawlins

Doctoral Dissertations

"The formation of carbonate solids from the alkaline earth oxide phases in steelmaking slag was investigated in dry and aqueous conditions as a vehicle for carbon dioxide sequestration. The goal of this research was to determine the process conditions that would increase the kinetics of the carbonate formation process under hydrous conditions, enabling direct removal of carbon dioxide from steelmaking offgas"--Abstract, page iv.

Modeling And Measurement Of Thermal Residual Stresses And Isotope Effects On Thermo Physical Properties Of Zrb₂-Sic Ceramics, Michael P. Teague

Masters Theses

"Commercially available finite element modeling software (ABAQUS) was used to investigate the internal residual stresses that develop as a result of cooling from processing temperatures in ZrB₂-SiC ceramics. The size and shape of the SiC particles were varied to evaluate their effect on the residual stresses. Results were compared to experimental data and showed similar trends, where increasing SiC particle size increased tensile stress and also decreased strength. Models were used to analyze benefits of novel shaped SiC inclusions and also better understand the short comings of the composites. An attempt to validate the models using neutron diffraction to measure …

Effect Of Carbon Nanofiber-Matrix Adhesion On Polymeric Nanocomposite Properties—Part Ii, Khalid Lafdi, William Fox, Matthew Matzek, Emel Yildiz

Chemical and Materials Engineering Faculty Publications

A successful integration of two independent phases with good adhesion is imperative for effective translation of superior carbon nanofiber filler properties into a physically superior carbon nanocomposite. Carbon nanofibers were subjected to electrochemical oxidation in 0.1 M nitric acid for varying times.

The strength of adhesion between the nanofiber and an epoxy matrix was characterized by flexural strength and modulus. The surface functional groups formed and their concentration of nanofibers showed a dependence on the degree of oxidation. The addition of chemical functional groups on the nanofiber surface allows them to physically and chemically adhere to the continuous resin matrix. …

Carbon Nanoadditives To Enhance Latent Energy Storage Of Phase Change Materials, Shadab Shaikh, Khalid Lafdi, Kevin P. Hallinan

Chemical and Materials Engineering Faculty Publications

Latent energy storage capacity was analyzed for a system consisting of carbon nanoparticlesdopedphase changematerials (PCMs). Three types of samples were prepared by doping shell wax with single wall carbon nanotubes(SWCNTs), multiwall CNTs, and carbon nanofibers. Differential scanning calorimetry was used to measure the latent heat of fusion. The measured values of latent heat for all the samples showed a good enhancement over the latent heat of pure wax. A maximum enhancement of approximately 13% was observed for the wax/SWCNT composite corresponding to 1% loading of SWCNT. The change in latent heat was modeled by using an approximation for the intermolecular …

Nitrogen And Hydrogen Plasma Treatments Of Multiwalled Carbon Nanotubes, John G. Jones, A. R. Waite, Christopher Muratore, Andrey A. Voevodin

Chemical and Materials Engineering Faculty Publications

This article investigates plasma treatment of vertically aligned multiwall carbon nanotube (CNT) films in different plasma environments for modification of surface chemistry and morphology. The surfaces of the CNTs were functionalized with a pulsed dc plasma treatment, where the power was directly applied to the nanotube film in low pressure argon/nitrogen and argon/hydrogen backgrounds. Optical emission spectroscopy was used to detect atomic and molecular excitations in the gas mixtures as well as in pure gases in the vicinity of the CNT films. In situx-ray photoelectron spectroscopy was performed on the treated samples to examine CNT surface chemistry after treatment. …

Effects Of Internal Oxidation On Thermo-Mechanical Properties Of Atmospheric Plasma Sprayed Conicraly Coatings, Travis Patterson

Electronic Theses and Dissertations

Thermal barrier coatings (TBC) with MCrAlY (M=Co and/or Ni) bond coats have been widely used in hot sections of gas turbines to protect underlying superalloys from high temperatures, oxidation, and hot corrosion. Deposition of MCrAlY bond coats using atmospheric plasma spray (APS), as oppose to conventionally employed vacuum/low-pressure plasma spray and high velocity oxy-fuel deposition, allows greater flexibility in ability to coat economically and rapidly for parts with complex geometry including internal surfaces. There were three objectives of this study. First, relationships between APS spray parameters and coating microstructure was examined to determine optimum spray parameters to deposit APS CoNiCrAlY …

Dynamics Of Pipa-D₇ On Silica Surface, Piyawan Krisanangkura, Frank D. Blum

Chemistry Faculty Research & Creative Works

Molecular motion of polymer chains is an important determinant in understanding the physical properties of polymeric materials. Glass transition temperature (Tg) is a physical property of polymers, which is of primary interest. The study of the dynamics of polymer segments assists in understanding the dependence of Tg on polymer structure.1 For decades, studies have addressed the molecular motion in various polymers. Some of them have probed the dynamics of polymer backbones.2,3 the properties of a polymer at an interface may change because of the type of polymer, the substrate, or other variables. The side chain of a polymer can also …

Quantitative Thickness Mapping In High-Angle Annular Dark-Field (Haadf) Scanning Transmission Electron Microscopy (Stem), Haritha Nukala

Electronic Theses and Dissertations

Only a few methods are currently available for the measurement of sample thicknesses in Transmission Electron Microscopy (TEM). These methods, Convergent-Beam Electron Diffraction (CBED) and thickness mapping in Energy-Filtered TEM (EFTEM), are either elaborate or complex. In this present work, I have investigated and come up with a simple straight-forward method to measure the local thickness of a TEM sample with the atomic number (Z-contrast) imaging using High-Angle Annular Dark Field (HAADF) Scanning Transmission Electron Microscopy (STEM). HAADF STEM shows atomic number contrast for high scattering angles of the electrons, owing to predominant electron scattering at the potential of the …

Production Of Bulk Ceramic Shapes From Polymer Derived Ceramics, Arnold Hill

Electronic Theses and Dissertations

A method has been developed to produce bulk ceramic components from a class of ceramics known as polymer derived ceramics. In the past polymer derived ceramics have been limited to thin film applications or in the fabrication of MEMS devices. The reason being that when the polymer is into a ceramic, large quantities of gas are generated which produce internal pressure that fractures the ceramic components. The method developed here solves that issue by casting into the polymer a 3 dimensional network of polymer fibers in the form of a foam which, during pyrolysis, burns out and leaves a network …

Laser Enhanced Doping For Silicon Carbide White Light Emitting Diodes, Sachin Bet

Electronic Theses and Dissertations

This work establishes a solid foundation for the use of indirect band gap semiconductors for light emitting application and presents the work on development of white light emitting diodes (LEDs) in silicon carbide (SiC). Novel laser doping has been utilized to fabricate white light emitting diodes in 6H-SiC (n-type N) and 4H-SiC (p-type Al) wafers. The emission of different colors to ultimately generate white light is tailored on the basis of donor acceptor pair (DAP) recombination mechanism for luminescence. A Q-switched Nd:YAG pulse laser (1064 nm wavelength) was used to carry out the doping experiments. The p and n regions …

Preparation And Characterisation Of Stabilized Nafion/Phosphotungstic Acid Composite Membranes For Proton Exchange Membrane Fuel Cell (Pemfc) Automobile Engines, Rohit Agarwal

Electronic Theses and Dissertations

Membrane durability is one of the limiting factors for proton exchange membrane fuel cell (PEMFC) commercialisation by limiting the lifetime of the membrane via electrochemical / mechanical / thermal degradation. Lower internal humidity in the membrane at high temperature ( > 100 °C) and low relative humidity (25-50 %RH) operating conditions leads to increased resistance, lowering of performance and higher degradation rate. One of the promising candidates is composite proton exchange membranes (CPEMs) which have heteropoly acid (HPA) e.g. Phosphotungstic acid (PTA) doped throughout the Nafion® matrix. HPA is primarily responsible for carrying intrinsic water which reduces the external water dependence. …

Synthesis And Characterization Of Polymer-Derived Porous Sicn Ceramics, Yun Wei

Electronic Theses and Dissertations

The synthesis and characterization of porous SiCN ceramics produced by the method of polymer-derived ceramics were studied in this work. The polymer-to-ceramic conversion technique is a novel revolution in the methods for fabricating porous materials with controlled morphologies and tailored properties. The porous SiCN ceramics can be successfully prepared from thermal decomposition of polymeric precursors (polysilazane) and the pore former (polyvinyl alcohol (PVA)). The fabrication procedures involved the mixing of the pre-ceramic precursor with appropriate concentration of the PVA, curing, pyrolysis and subsequent PVA removal, leaving pores in the ceramic matrix. The material obtained revealed a homogeneous amorphous microstructure consisting …