Engineering Commons^™

Analyzing The Acoustical Properties Of Alternative Materials In Guitar Soundboards To Reduce Deforestation, Chris Dunn

Materials Engineering

To mitigate the effects of deforestation, man-made alternative materials were analyzed and tested for potential use in the soundboards of acoustic guitars. The materials evaluated included 0.06 in. foamed polycarbonate, 0.12 in. single-ply honeycomb fiberglass, and 0.04 in. epoxy fiberglass. The properties of Sitka spruce, the most common tonewood, were used as a benchmark. The Young’s modulus to density ratio found in Sitka spruce is relatively high, making its properties ideal for soundboard applications. Both Young’s modulus and density were necessary to calculate the acoustic constant of each material that was tested. The samples were subject to the impact of …

Interactive Museum Exhibit To Introduce K-6 Grade Students To Circuits And The Electric Conductivity Of Various Materials, Thien Vu-Nguyen

Materials Engineering

The SciTechatorium (SciTech) is a museum filled with interactive exhibits for visitors to learn science informally. A new exhibit was developed to explore electric conductivity and circuits. The design was made based on the size of the material sample the students will use and to allow interactions with multiple users. The materials the students will use were selected using Cambridge Engineering Selector (CES) to sort the materials by resistivity, the inverse of conductivity. After sorting the materials by resistivity, five different materials (balsa wood, polystyrene, polyester, stainless steel, and copper) were chosen for the exhibit. The target size of the …

Development Of A High Precision Quantum Dot Synthysis Method Utilizing A Microfluidic Reactor And In-Line Fluorescence Cell, Harry Lafferty, Jonny Hoadley

Materials Engineering

Quantum dots show great potential for use as spectral converters in solar cells, lighting applications and biological imaging. These applications require precise control of quantum dot size to maximize performance. The fluorescence profile of quantum dots in solution correlates directly with particle size. An alternative, high precision process was developed for the synthesis of cadmium-selenide quantum dots using a microfluidic reactor and fluorescence flow through cell. The process required creating separate cadmium and selenium precursors that were then mixed in a nitrogen environment at 17± 1°C. Using an NE-300^® syringe pump, the solution was pumped through a microfluidic reactor …

Comparison Of Polyurethane And Polysiloxane Coating Systems In Marine Environments, Jake Jarman, Jessica Salvatin

Materials Engineering

This project investigates the performance benefits of polysiloxane and polyurethane coating systems for corrosion protection in marine environments. PPG Industries Amercoat 450H and International Paint Interthane 990HS were the polyurethane topcoats tested. PPG Industries Ameron PSX 700 (New Blend) and International Paint Interfine 878 were the polysiloxane topcoats tested. Each coating was sprayed onto carbon steel panels that were prepared through hand blasting with glass beads. Scribed and unscribed panels were tested in a salt fog chamber for 1,200 hours according to ASTM Standard B0117-11 and in a UV/Humidifier for 1,650 hours according to ASTM Standard D4587-11. Panels were tested …

Effect Of Carbon On Primary Alpha Percentage In Ti-6al-4v As Temperature Approaches The Beta Transus, Kyle Savage

Materials Engineering

Some Ti-6Al-4V forgings require a specific amount of α phase known as primary α in the finished product. The percentage of primary α is dependent on how close to the beta transus temperature forging is conducted. The beta transus temperature is affected by certain alloying elements. Carbon is one of the elements known to increase the beta transus temperature. Since each Ti-6Al-4V ingot contains varying amounts of carbon, testing on a variety of chemistries needs to be conducted. Cubes approximately 0.5 inches from low, medium, and high carbon chemistries were heat treated at temperatures below the beta transus in 18 …

The Optimization And Packaging Of Materials Safari Science Educational Tool For K-4 Grade Levels, Elizabeth Chandy

Materials Engineering

An interactive materials-based learning kit for K-4 grade levels was refined to effectively be used in outreach and after-school programs. Different safari animals made of different materials are packaged in the kit, along with different activities to explore physical properties. An optimized number and variety of animals and materials were determined. The volume and weight of the Materials Safari learning kit was optimized to meet the user’s needs. One way the product was optimized was reducing the number of animal pieces in the product. Also, two of the testing stations were reduced in size by about fifty percent to fit …

Structural Health Monitoring Data Transmission For Composite Hydrokinetic Turbine Blades, A. Heckman, Joshua L. Rovey, K. Chandrashekhara, Steve Eugene Watkins, Daniel S. Stutts, Arindam Banerjee, Rajiv S. Mishra

Mechanical and Aerospace Engineering Faculty Research & Creative Works

No abstract provided.

Electrospun Plant Protein Scaffolds With Fibers Oriented Randomly And Evenly In Three-Dimensions For Soft Tissue Engineering Applications, Shaobo Cai

Department of Textiles, Merchandising and Fashion Design: Dissertations, Theses, and Student Research

In this work, electrospinnable and water stable soyprotein was extracted by using a reducing agent in mild alkaline condition, and novel 3D zein and 3D pure soyprotein electrospun scaffolds with three-dimensionally and randomly oriented fibers and large interconnected pores were successfully fabricated by reducing surface resistivity of materials. This unique structure is different from most electrospun scaffolds with fibers oriented mainly in one direction. The structure of novel 3D scaffolds could more closely mimic the 3D randomly oriented fibrous architectures in many native extracellular matrixes (ECM). Confocal laser scanning microscope shows that instead of becoming flattened cells when cultured in …

Atmospheric Pressure He-Air Plasma Jet: Breakdown Process And Propagation Phenomenon, Asma Begum, Mounir Laroussi, Mohammad Rasel Pervez

Electrical & Computer Engineering Faculty Publications

In this paper He-discharge (plasma jet/bullet) in atmospheric pressure air and its progression phenomenon has been studied experimentally using ICCD camera, optical emission spectroscopy (OES) and calibrated dielectric probe measurements. The repetitive nanosecond pulse has applied to a plasma pencil to generate discharge in the helium gas channel. The discharge propagation speed was measured from the ICCD images. The axial electric field distribution in the plasma jet is inferred from the optical emission spectroscopic data and from the probe measurement. The correlation between the jet velocities, jet length with the pulse duration is established. It shows that the plasma jet …

An Investigation Of Arabinan And Cellulose Based Nano-Composite Fabrication Methods, Marianne Smithfield, Carl Petterson, Robert Miller

Materials Engineering

Microcrystalline cellulose was converted into nanocrystalline cellulose via an acid hydrolysis procedure. Scanning electron microscopy (SEM) was employed to measure the particle size and thus the effectiveness of acid hydrolysis. The nanocrystalline cellulose was poured through a 0.2μm filter to isolate the particles of ideal size. The nanocrystalline cellulose samples were stored in dimethylformamide (DMF) to prevent mold growth and agglomeration upon drying. Numerous composite samples were created by dissolving the arabinan in a solvent, suspending cellulose in the arabinan solution, and then drying the sample. Casting was performed in a silicon mold to allow sample removal without damage. Initial …

Evaluation Of Forging Strain For Maximum Grain Size In Open-Die Forged 6061 Aluminum, Eric Strehl

Materials Engineering

In an effort to maximize grain growth of open-die forged 6061 aluminum alloy parts, samples from three of Weber Metals’s suppliers (Hidal Co-Almex USA Inc., TST Inc., and Vista Metals Corp.; to be called Supplier H, Supplier T, Supplier V respectively) were cut into cylinders with diameters of 0.75˝ and heights of 2˝, and put through a simulated forging process and heat treatment. It is possible that additional alloying elements may be promoting or inhibiting grain growth in the final part. Maximizing grain growth for aluminum alloy parts results in improved resistance to intergranular corrosion. Samples from each vendor had …

Experimental Assessment Of The Impact Of Asymptomatic Gas Emboli On The Vessel Wall, Linxia Gu, Eric L. Cutler

Department of Mechanical and Materials Engineering: Faculty Publications

Quantitative evaluation of shear stress in the vessel wall due to the presence of asymptomatic gas emboli is lacking. The goal of this work was to assess the impact of chronic asymptomatic gas emboli on the risk of atherosclerosis through a custom-built cardiovascular flow simulator. Gas bubbles were created by forced air from a syringe pump. The influences of embolism injection rate, pulse rate, and time-averaged flow rate on the wall mean shear stress were investigated at resting and elevated heart rate conditions. The recorded pressure and volumetric flow rate from 24 experimental settings with four repetitions each were used …

Low Velocity Impact Tower Feasibility, Setup, And Impact Testing Of Carbon Fiber Reinforced Epoxy Thermoset And Peek Thermoplastic Matrix Composites, Brent Plehn

Materials Engineering

A low velocity impact tower was donated to Cal Poly's Materials Engineering Department along with four fiber reinforced polymer matrix composites. The tower was set up in building 192 in the Mechanical Testing Laboratory. Improvements were made to the tower including adding velocity detection capabilities, making loose hardware inclusive, adding an extra tower arm for better consistency, adding a double jawed clamp for faster testing, and rerouting the tower's compressed air system to improve performance. A standard operating procedure was drafted, tested, and redrafted for impact testing composite panels. The four composite panels consisted of two quasi-isotropic 16 ply AS-1 …

A Design Methodology For Buoyant Prescription Sunglasses, Katherine Burzynski

Materials Engineering

As a means to develop fashionable, buoyant prescription sunglasses, this project focused on identifying a system of lens and frame materials that yield sunglasses that float in water. There was an emphasis on developing a product that could be integrated into the current sunglass market. The term fashionable is used to define a sleek frame style that does not require attaching additional floatation. This methodology relies on the relationships between the strength of the user’s prescription and the volume of the desired sunglass frame style. This relationship was verified through buoyancy testing. This testing included varying the lens material in …

Design And Implementation Of A Micro Force Displacement System, Evan Cate

Materials Engineering

The design and implementation of a micro-force displacement system was completed to test various Micro-Electro-Mechanical Systems (MEMS) devices including silicon diaphragms and cantilevers. The system utilizes a World Precision Instruments Fort 10g force transducer attached to a World Precession Instruments TBM4M amplifier. A Keithley 2400 source meter provided data acquisition of the force component of the system. A micro prober tip was utilized as the testing probe attached to the force transducer with a tip radius of 5um. The displacement of samples was measured using a Newport M433 linear stage driven by a Newport ESP300 motion controller (force readings at …

Application Of Quantum Dots Onto Glass Wafers As A Feasibility Test For The Spectral Down Conversion Of Uv Light For Solar Cells, Anthony Fong

Materials Engineering

Quantum dots have the ability to convert high energy photons into multiple lower energy photons. Down conversion of such high energy photons from sources such as UV light can be beneficial for applications on solar cells which waste much of the energy in the form of thermalization. To test this theory, a solar cell was hooked up to an Amprobe Solar Analyzer and tests were run to compare power output with and without the presence of quantum dots. Additionally, quantum dots were spin coated onto a glass wafer to determine its adhesion ability. Spectrometer readings were taken of the wafer …

Surfactant Formulations For Water-Based Processing Of A Polythiophene Derivative, Cameron Dean Danesh

Master's Theses

Conjugated polymers are semiconducting materials that are currently being researched for numerous applications from chemical and biological sensors to electronic devices, including photovoltaics and transistors. Much of the novel research on conjugated polymers is performed in academic settings, where scientists are working to prepare conjugated polymers for commercially viable applications. By offering numerous advantages, inherent in macromolecular materials, conjugated polymers may hold the key to cheap and environmentally friendly manufacturing of future electronic devices. Mechanical flexibility, and solvent-based coating processes are two commonly cited advantages. Transitions in the backbone conformation of polythiophenes (PT) in organic solvents have been widely observed …

Characterization And Modeling Of An O-Band 1310 Nm Sampled-Grating Distributed Bragg Reflector (Sg-Dbr) Laser For Optical Coherence Tomography (Oct) Applications, Desmond Charles Talkington

Master's Theses

In this project, the performance aspects of a new early generation 1310 nm Sampled-Grating Distributed Bragg Reflector (SG-DBR) semiconductor laser are investigated. SG-DBR lasers are ideal for Source Swept Optical Coherence Tomography (SS-OCT), a Fourier-Domain based approach for OCT, necessitating a tunable wavelength source. Three internal sections control the frequency output for tuning, along with two amplifiers for amplitude control. These O-band SG-DBR devices are now being produced in research quantities. SG-DBR lasers have been produced at 1550 and 1600 nm for some times. Fundamental questions regarding the performance of the 1310 nm devices must be quantified. Standard metrics including …

Shelf Life Study Of Electrospun Plga Copolymers, Sean Youra, Nick Hudson

Biomedical Engineering

Poly(lactic-co-glycolic acid) (PLGA) is one of the most commonly used copolymers for electrospinning in tissue engineering applications. However, most research has not focused on the copolymer itself in regards to how long it can be used effectively and if varying the concentrations of polylactic acid (PLA) and polyglycolic acid (PGA) affect the resulting properties. Electrospinning is the method we use to create the three-dimensional constructs, or “scaffolds”, for the blood vessel mimic (BVM) in the tissue engineering lab. The aim of our project was to investigate if the morphology and mechanical properties of the scaffolds changed over time when they …

Influence Of Sinx/Si Interface States On Si Solar Cells, Santosh Sahoo

Dissertations

Impact of the SiN_x/n⁺-Si interface on silicon solar cell performance was investigated, where SiN_x is used as a passivation layer. Significant shifts in capacitance, conductance and leakage current characteristics were observed for metal/SiN:H/n⁺-Si MOS capacitor when it was subjected to a constant voltage stress (CVS) of +10V at room temperature. The interface trap density (D_it) across the SiN:H/n⁺-Si interface increased from 6.3 x 10⁹ to 7.5 x 10⁹ cm^-2 eV^-1 after a 500-second stress whereas the n⁺/p junction diode remained unaffected by the …

Synthesis And Characterization Of Novel Boron-Based Nanostructures And Composites, Rajen B. Patel

Dissertations

A number of nanomaterials have been synthesized by using a method that has been previously utilized to make pure boron nanostructures through the addition of different reactant gases to the process. This method was pioneered by Iqbal-Liu and will be referred to as the IL method in this dissertation. The IL method successfully created boron nanowires, boron nanoflakes, and boron nanotubes. In this dissertation, by adding methane, hydrogen sulfide, and ammonia to the process, an entire family of nanomaterials is prepared. These include nanowires, nano-heterostructures, and thin nanoplatelets of a variety of elemental compositions. These materials can be integrated with …

The Effects Of Rapid Stretch Injury On Rat Neocortical Cultures, George Constandinos Magou

Dissertations

Several key biological mechanisms of traumatic injury to axons have been elucidated using in vitro stretch injury models. These models, however, are based on the experimentation of single cultures keeping productivity slow. Indeed, low yield has hindered important and well founded investigations requiring high throughput methods such as proteomic analyses. To meet this need, a multi-well high throughput injury device is engineered to accelerate and accommodate the next generation of traumatic brain injury research. This modular system stretch-injures neuronal cultures in either a 24-well culture plate format or six individual wells simultaneously. Custom software control allows the user to accurately …

Foaming Of Amorphous Drug Delivery Systems Prepared By Hot Melt Mixing And Extrusion, Graciela Terife

Dissertations

Currently there is considerable interest from both academe and pharmaceutical industry in exploring foaming processes and their products in drug delivery applications. However, there is still little knowledge of the impact of the morphology of the foamed structures on the performance of drug products in spite of some publications in this area. Therefore, the main objective of this dissertation is to gain a fundamental understanding of the correlation between foam morphology and performance of amorphous drug delivery systems, which are comprised of an Active Pharmaceutical Ingredient (API) and Polymer excipient.

The Hot Melt Extrusion (HME) process is used to compound …

Measurement Of Gas Flow Through Porous Structures Using Thz Spectroscopy, Yihui Wang

Theses

Comparing THz transmission through a sample with the transmission through free-space allows one to calculate the THz absorbance of a sample. Previous studies have focused on using THz absorbance to measure the diffusion of liquid through materials. In this study, the ability of THz spectroscopy to measure the flow of gas in a porous material, packaging foam, is investigated. Specifically, Terahertz spectroscopy from 0.5 to 0.7 THz is used to measure the THz absorption of 1, 1 -difluoroethane. Several experiments are performed to test the ability of THz spectroscopy to measure the flow of gas in a porous material: (1) …

Current Measurements In Electrospinning, Clinton K. Lien

Theses

Electrospinning provides an economical method of producing nanofibers. The current carried by the main spinning jet is found to be one of the factors in determining the diameter of the fiber product. However, current sources such as the corona discharge and secondary jets will lead to a systematic overestimation of the actual current value.

In this research, experiments with different configurations are set up to investigate the influence of various parameters on the measured current. It is noticed that the measured current is nearly independent on the flow rate of the solution and the external cover. A large amount of …

Role Of Materials & Design On Performance Of Baseball Bats, Kim Benson-Worth

Theses

Baseball bat safety has become an increasing area of interest with more than 19 million people in the United States alone participating in this sport. An increase in injuries resulting from bat injuries has brought the performance of the bats into question. A review of several studies focusing on the effects of the material properties of various baseball bats designs were examined. From this review it is evident that player and spectator safety greatly rely on proper baseball bat design. There was a 30% reduction in the Multi-Piece Failures (MPF) of wooden bats once the requirement of a Slope of …

Study Of Poly (L-Lactic Acid)/Poly (D-Lactic Acid) Stereocomplex As Nucleating Agent For Poly (L- Lactic Acid) Crystallization, Yuan Lao

Theses

Poly (lactic acid) (PLA) is a biodegradable polymer with good renewability and processability. However, it has some drawbacks. The Poly (lactic acid) (PLA) stereocomplex formed via the interaction between optical isomers Poly (L-lactic acid) (PLLA) and Poly (D-lactic acid) (PDLA), provides improvements on PLA thermomechanical properties. To investigate the nucleating effect brought by the PLA stereocomplex, samples of PLLA blended with different content of PDLA are prepared by the solution casting method. With different cooling rates (5, 15, 25 °C/min), DSC non-isothermal crystallization experiments are performed. The results suggest that in the presence of the stereocomplex, the PLLA crystallization temperatures …

Fatigue Testing And Data Analysis Of Welded Steel Cruciform Joints, Alina Shrestha

LSU New Orleans Theses and Dissertations

In this study, ABS Publication 115, “Guidance on Fatigue Assessment of Offshore Structures” is briefly reviewed. Emphasis is on the S-N curves based fatigue assessment approach of non-tubular joints, and both size and environment effects are also considered. Further, fatigue tests are performed to study the fatigue strength of load-carrying and non-load-carrying steel cruciform joints that represent typical joint types in marine structures. The experimental results are then compared against ABS fatigue assessment methods, based on nominal stress approach, which demonstrates a need for better fatigue evaluation parameter. A good fatigue parameter by definition should be consistent and should correlate …

Stress Analysis Of Ramberg-Osgood And Hollomon 1-D Axial Rods, Ronald J. Giardina Jr

LSU New Orleans Theses and Dissertations

In this paper we present novel analytic and finite element solutions to 1-D straight rods made of Ramberg-Osgood and Hollomon type materials. These material models are studied because they are a more accurate representation of the material properties of certain metals used often in manufacturing than the simpler composite linear types of stress/strain models. Here, various types of loads are considered and solutions are compared against some linear models. It is shown that the nonlinear models do have manageable solutions, which produce important differences in the results - attributes which suggest that these models should take a more prominent place …

Studies On Structure And Property Of Polymer-Based Nano-Composite Materials, Yun Zhai

LSU New Orleans Theses and Dissertations

The mixing of polymers and nanoparticles makes it possible to give advantageous macroscopic material performance by tailoring the microstructure of composites. In this thesis, five combinations of nano inclusion and polymer matrix have been investigated.

The first type of composites is titanium dioxide/ polyaniline combination. The effects of 4 different doping-acids on the microstructure, morphology, thermal stability and thermoelectric properties were discussed, showing that the sample with HCl and sulfosalicylic dual acids gave a better thermoelectric property. The second combination is titanium dioxide/polystyrene composite. Avrami equation was used to investigate the crystallization process. The best fit of the mass derivative …