Engineering Commons^™

Development Of A Mechanistic Understanding Of High-Temperature Deformation Of Alloy Ep-823: Aaa Task-10 Quarterly (03/01, 2002 –05/31, 2002) Report, Ajit K. Roy, Brendan O'Toole

Transmutation Sciences Materials (TRP)

The objective of this task is to evaluate the elevated temperature tensile properties of Alloy EP-823, a leading target material for accelerator-driven waste transmutation applications. The test material will be thermally treated prior to evaluation of its tensile properties at temperatures relevant to the transmutation applications. The deformation characteristics of tensile specimens, upon completion of testing, will be evaluated by surface analytical techniques including scanning electron microscopy (SEM) and transmission electron microscopy (TEM). The overall results are expected to provide a mechanistic understanding of high-temperature deformation behavior of Alloy EP-823 as a function of heat treatment.

Highlights of Accomplishment

• …

Modeling Corrosion In Oxygen Controlled Lbe Systems With Coupling Of Chemical Kinetics And Hydrodynamics: Quarterly Progress Report 03/16/02- 06/15/02, Samir Moujaes, Yitung Chen

Transmutation Sciences Materials (TRP)

The Lead-Bismuth eutectic (LBE) has been determined from previous experimental studies by the Russians and the European scientific community to be a potential material that can be used as a spallation target and coolant for the AAA proposed application. Properly controlling the oxygen content in LBE can drastically reduce the LBE corrosion to structural steels. However, existing knowledge of material corrosion performance was obtained from point-wise testing with very limited density. Scientists have noticed that the concentration of oxygen dissolved in the liquid alloy could control the corrosion rate of steels exposed to Pb or Pb-Bi. At high oxygen concentration, …

Development Of A Model For Induction Heating, Randy Clarksean, Yitung Chen

Fuels Campaign (TRP)

There are two coupled equations that must be solved in order to determine the power deposition. The numerical solution of these equations is needed in order to apply a source term within the energy equations. These equations have previously solved in FIDAP. That implementation used modified versions of the momentum and energy equations to provide a mechanism for the solution of two coupled equations. Currently, we want to solve for the induction heating field in addition to the flow field and the energy equation. In order to do this, a mechanism has to be defined within FIDAP to solve these …

Modeling Corrosion In Oxygen Controlled Lbe Systems With Coupling Of Chemical Kinetics And Hydrodynamics-Phase Two, Samir Moujaes, Yitung Chen

Transmutation Sciences Materials (TRP)

The proposed work will combine chemical kinetics and hydrodynamics in target and test-loop lead-bismuth eutectic (LBE) systems to model system corrosion effects. This approach will result in a predicative tool that can be validated with corrosion test data, used to systematically design tests and interpret the results, and provide guidance for optimization in LBE system designs. The task includes two subtasks. The first subtask is to try to develop the necessary predictive tools to be able to predict the levels of oxygen and corrosion products close to the boundary layer through the use of Computational Fluid Dynamics (CFD) modeling. The …

Development Of A Systems Engineering Model Of The Chemical Separations Process, Yitung Chen, Darrell Pepper, Randy Clarksean

Separations Campaign (TRP)

Two activities are proposed: the development of a systems engineering model and the refinement of the Argonne code AMUSE (Argonne Model for Universal Solvent Extraction). The detailed systems engineering model will be the start of an integrated approach to the analysis of the materials separations associated with the AAA Program. A second portion of the project will streamline and improve an integral part of the overall systems model, which is the software package AMUSE. AMUSE analyzes the UREX process and other related solvent extraction processes and defines many of the process streams that are integral to the systems engineering model. …

Development Of A Mechanistic Understanding Of High-Temperature Deformation Of Alloy Ep-823 For Transmutation Applications, Ajit K. Roy, Brendan O'Toole

Transmutation Sciences Materials (TRP)

The purpose of this project is to evaluate the elevated temperature tensile properties of Alloy EP-823, a leading target material for accelerator-driven waste transmutation applications. This alloy has been proven to be an excellent structural material to contain the lead-bismuth-eutectic (LBE) nuclear coolant needed for fast spectrum operations. However, very little data exist in the open literature on the tensile properties of this alloy. The selection of Alloy EP-823 as the test material in the proposed task is based on the recommendation of our collaborator at the Los Alamos National Laboratory (LANL). The test material will be thermally treated prior …

Development Of A Systems Engineering Model Of The Chemical Separations Process: Quarterly Progress Report 2/16/02- 5/15/02, Yitung Chen, Randy Clarksean, Darrell Pepper

Separations Campaign (TRP)

Two activities are proposed in this Phase I task: the development of systems engineering model and the refinement of the Argonne code AMUSE (Argonne Model for Universal Solvent Extraction). The detailed systems engineering model is the start of an integrated approach to the analysis of the materials separations associated with the AAA Program. A second portion of the project is to streamline and improve an integral part of the overall systems model, which is the software package AMUSE. AMUSE analyzes the UREX process and other related solvent extraction processes and defines many of the process streams that are integral to …

Humidity And Temperature Boundaries For Biofilm Formation In Yucca Mountain, Terry Ann Else, Penny S. Amy, James Jay, Amy J. Smiecinski

Publications (YM)

To determine the long-term success of the recommended Yucca Mountain high-level nuclear waste repository, studies of bacterial colonization and biofilm development are needed. Bacteria involved in microbially-influenced corrosion and degradation are known to form biofilms with the potential to impact the integrity of repository packaging and structural materials. Temperature and humidity are environmental factors that can greatly affect biofilm formation. Therefore, it is necessary to determine the temperature and humidity conditions that affect biofilm formation. Microcosms, which simulated the repository environment of Yucca Mountain, were placed at temperatures ranging from 30° C to 70° C and in relative humidities ranging …

The Fission Properties Of Curium Separated From Spent Nuclear Fuel, William Culbreth, Elizabeth Bakker, Jason Viggato

Separations Campaign (TRP)

Curium poses special problems in the chemical preparation of spent nuclear fuel for transmutation. Once separated from the other minor actinides, the seven curium isotopes in spent fuel can lead to nuclear fission with the subsequent release of a large amount of radiation. Several isotopes of curium also generate a significant amount of heat by radioactive decay. Sustained fission can be avoided by preventing the accumulation by more that a critical mass of curium. The heat generation of curium presents even more restriction on the mass of curium that can safely be contained in one location.

To analyze the nuclear …

Nuclear Criticality Analyses Of Separations Processes For The Transmutation Fuel Cycle: Quarterly Report, William Culbreth, Pang Tao

Separations Campaign (TRP)

During the first two quarters of the work, the tasks included training students in the use of Monte Carlo codes used in radiation transport studies and the assessment of neutron multiplication factors for specific problems outlined by ANL-East through Drs. Laidler and Vandegrift.

The proposal also included objectives for the first year of work on this project, as listed below. The work conducted in the second quarter of the project was in partial completion of these objectives.

• Train UNLV students in the use of SCALE and/or MCNP for the assessment of nuclear criticality.

• Assess neutron multiplication factor, k …

Coalbed Methane In The San Juan Basin Of Colorado And New Mexico, Catherine Cullicott, Carolyn Dunmire, Jerry Brown, Chris Calwell

Coalbed Methane Development in the Intermountain West (April 4-5)

35 pages (includes color illustrations and maps).

Contains 6 pages of endnotes.

Coalbed Methane Development In Wyoming’S Powder River Basin, Diana Hulme

Coalbed Methane Development in the Intermountain West (April 4-5)

21 pages (includes color illustrations and maps).

Contains endnotes.

Powder River Basin Coalbed Methane Financial Model (Prb-Cbm-Fm), W. Thomas Goerold

Coalbed Methane Development in the Intermountain West (April 4-5)

12 pages (includes illustrations).

Contains references.

Overview Of Cbm Issues In The San Juan Basin, Catherine Cullicott

Coalbed Methane Development in the Intermountain West (April 4-5)

3 pages (includes some color illustrations and maps).

Impacts Of Cbm Development On Communities, Gwen Lachelt

Coalbed Methane Development in the Intermountain West (April 4-5)

2 pages.

Agenda: Coalbed Methane Development In The Intermountain West, University Of Colorado Boulder. Natural Resources Law Center

Coalbed Methane Development in the Intermountain West (April 4-5)

306 p. : ill., maps ; 28 cm

"July 2002"--Cover

Proceedings of a conference held April 4-5, 2002

Listed as no. 28 in the Research Report Series on the NRLC Recent Publications list

Includes bibliographical references

Contents:

Coalbed methane development in the Intermountain West : a primer / Gary Bryner -- Coalbed methane development in the Intermountain West : case studies. Coalbed methane in the San Juan Basin of Colorado and New Mexico / Catherine Cullicott, Carolyn Dunmire, Jerry Brown, Chris Calwell ; Coalbed methane development in Wyoming's Powder River Basin / Diana Hulme -- Keynote address / Rebecca Watson …

The Hydrology Of Coalbed Methane Reservoirs And The Interplay Of Gas, Water, And Coal In Cbm Production, Leslie Nogaret

Coalbed Methane Development in the Intermountain West (April 4-5)

7 pages (includes color illustrations and map).

Best Cbm D[R]Illing, Completion, Production, Technologies, And Management Practices, Dennis Carlton

Coalbed Methane Development in the Intermountain West (April 4-5)

3 pages.

Cbm Development And Water Issues, Dave Brown

Coalbed Methane Development in the Intermountain West (April 4-5)

7 pages (includes color illustrations).

Keynote Address, John Watts

Coalbed Methane Development in the Intermountain West (April 4-5)

5 pages.

Coalbed Methane In The Rocky Mountain Region: Yesterday, Today And Tomorrow, Matthew R. Silverman

Coalbed Methane Development in the Intermountain West (April 4-5)

8 pages (includes color illustrations and maps).

Contains references.

Developing Cbm In The Powder River Basin, William T. Brown, Jr.

Coalbed Methane Development in the Intermountain West (April 4-5)

5 pages (includes some color illustrations and maps).

Federal, State, And Local Regulatory Framework For Permitting Of Cbm Development, Kate Zimmerman

Coalbed Methane Development in the Intermountain West (April 4-5)

17 pages.

Contains 5 pages of endnotes.

Concluding Comments, Mark Pearson

Coalbed Methane Development in the Intermountain West (April 4-5)

3 pages.

Coalbed Methane Development In The Intermountain West: Primer, Gary Bryner

Coalbed Methane Development in the Intermountain West (April 4-5)

50 pages (includes color illustrations and maps).

Contains 7 pages of endnotes.

An Overview Of Cbm Exploration And Production, Steve De Albuquerque

Coalbed Methane Development in the Intermountain West (April 4-5)

9 pages (includes color illustrations and maps).

Waste Or Wasted? Rethinking The Regulation Of Coalbed Methane Byproduct Water In The Rocky Mountains: A Comparative Analysis Of Approaches To Cbm Produced Water Quantity Legal Issues In Utah, New Mexico, Colorado, Montana And Wyoming, Thomas F. Darin

Coalbed Methane Development in the Intermountain West (April 4-5)

30 pages.

Contains 13 pages of references.

Cbm Development On The Southern Ute Reservation, Bob Zahradnik

Coalbed Methane Development in the Intermountain West (April 4-5)

6 pages (includes color illustrations and maps).

The Geology And Production Characteristics Of The Powder River And Other Cbm Basins In Wyoming, Lance Cook

Coalbed Methane Development in the Intermountain West (April 4-5)

7 pages (includes some color illustrations and maps).

A Review Of Cbm Development In The Powder River And Other Wyoming Basins, Don Likwarz

Coalbed Methane Development in the Intermountain West (April 4-5)

6 pages (includes illustrations).