Open Access. Powered by Scholars. Published by Universities.®

Engineering Commons

Open Access. Powered by Scholars. Published by Universities.®

Engineering Science and Materials

Institution
Keyword
Publication Year
Publication
Publication Type
File Type

Articles 4951 - 4980 of 5683

Full-Text Articles in Engineering

Electrochemical Properties Of Nitrate Immobilized On Gold Electrodes With 2-Aminoethanethiol Sams, Ya-Ru Song, Hong Wu, Hui-Bo Shao Aug 2002

Electrochemical Properties Of Nitrate Immobilized On Gold Electrodes With 2-Aminoethanethiol Sams, Ya-Ru Song, Hong Wu, Hui-Bo Shao

Journal of Electrochemistry

Nitrate reductase (NR) and phospholipids were immobilized on gold electrodes with 2-aminoethanethio(AET) SAMs. After Au/AET/NR and Au/AET/NR/lipid were soaked in pH 7 phosphate buffers for days, a pair of pre-reversible peak appeared at around 0.202 V and 0.149 V respsctively, irregularly grew with soaking time in blank buffer.The cathodic peak current (ipcl) of Au/AET/NR system had linear relationship with scan rate between 0.02 and 0.5 V⋅s-1 ,while ipcl was proportional to V1/2 in Au/AET/NR/lipid system. The direct electron transfer of enzyme electrodes was strongly affected by pH. Compared with Au/AET, NR exhibited a higher electrochemical …


Some Consideration For Lithium-Ion Cells' Safety, Guang-Xia Hu, Jing-Ying Xie Aug 2002

Some Consideration For Lithium-Ion Cells' Safety, Guang-Xia Hu, Jing-Ying Xie

Journal of Electrochemistry

The safety is the most important problem for lithium ion cells, especially for large lithium ion cells. In this paper, some information about lithium ion cells' safety can be learned by discussing several aspects of lithium ion cells, such as, materials of lithium ion cell, manufacturing processes, using conditions and so on.


Study On Hydrogen Evolution Performance Of Nickel-Tin Electrode, Tian-Yi Chang, Bao-Hong Zhang, Wenbo Cong, Yao Luo Aug 2002

Study On Hydrogen Evolution Performance Of Nickel-Tin Electrode, Tian-Yi Chang, Bao-Hong Zhang, Wenbo Cong, Yao Luo

Journal of Electrochemistry

The cathode active material with low hydrogen evolution overvoltage was prepared by electroplating Ni-Sn alloy on the ferrous basic body.This kind of material can be applied in the diaphragm type of electrolytic tank to decrease cell voltage and save energy. On the condition according with cathode solution in the electrolytic tank (NaOH 120 g/L, NaCl 190 g/L, 90 ℃, i=150 mA/cm2), the overvoltage of hydrogen evolution was 88 mV. By the X-ray diffraction analysis, it was found that the structure of this kind of material was different from that of Ni-Sn alloy applied in traditional decoration. By using …


Electrochemical Degradation Of Organic Wastewater By Three-Dimensional Electrode Reactor, Chun He, Tai-Cheng An, Ya Xiong, Dong Shu, Hui-Ling Hu, Xi-Hai Zhu Aug 2002

Electrochemical Degradation Of Organic Wastewater By Three-Dimensional Electrode Reactor, Chun He, Tai-Cheng An, Ya Xiong, Dong Shu, Hui-Ling Hu, Xi-Hai Zhu

Journal of Electrochemistry

The electrochemical degradation of aniline was investigated using a novel electrochemical reactor, three-dimensional electrode reactor. The experimental results indicated that the reactor could efficiently remove aniline. The removal efficiency could be attributed to a combination of direct and indirect electrochemical reactions, that is, anodic oxidation and oxidation of electrogenerated H2O2 and hydroxyl radicals generated in electro-Fenton process. It was also observed that the removal efficiency was significantly dependent on applied voltage, Fe2+ concentration, pH value and electrolysis time. In the experimental range they all have a positive effect on the removal efficiency except for pH value. …


Synthesis And Characterization Of Lini0.8-XAlXCo0.2O2 As Cathodes For Lithium-Ion Batteries, Jun Zhang, Zhong-Kao Jin, Qing-He Yang, Qing-Mei Song, Xiao-Hua Ma, Xiang-Fu Zong Aug 2002

Synthesis And Characterization Of Lini0.8-XAlXCo0.2O2 As Cathodes For Lithium-Ion Batteries, Jun Zhang, Zhong-Kao Jin, Qing-He Yang, Qing-Mei Song, Xiao-Hua Ma, Xiang-Fu Zong

Journal of Electrochemistry

Single-phase solid solution of LiNi0.8-xAlxCo0.2O2 (0≤ x <0.1)had been synthesized and characterized by X-ray diffraction(XRD) and scanning electron microscopy (SEM). Their electrochemical performance was examined by charge-discharge cycling. The LiNi0.71Al0.09Co0.2O2 compound showed a discharge capacity of 152 mAh/g after 20 cycles that corresponds to 97.4% capacity retention. The beneficial effect of co-doping with Al and Co elements was corro-borated by slow scanning cyclic voltammograms(SSCV), electrochemical impedance spectrum (EIS) and differential scanning calorimetry (DSC) data on charged cathodes. These results show that the 2D-character of the crystal lattice was stabilized by co-doping with Al and Co, the phase transitions that occur during deintercalation or intercalation of Li-ions were significantly suppressed, …


Research Progress On Electrode Material In All-Vanadium Redox Battery, Hua Li, Shou-Wen Chang, Chuan-Wei Yan Aug 2002

Research Progress On Electrode Material In All-Vanadium Redox Battery, Hua Li, Shou-Wen Chang, Chuan-Wei Yan

Journal of Electrochemistry

An all-vanadium redox flow storage battery possesses many advantages over conventional storage batteries.The development statue of two types electrode materials (metal and compound type) is introduced in this article.


Modification Of Molybdenum Nitride Electrode For Supercapacitor(I)——The Effect Of Ammonium Vanadate On The Properties Of Molybdenum Nitride Electrode, Xue-Liang Li, Dao-Rong Luo, Hua-Lin Wang, Jian-Bo He, Yun-Guei Zhu Aug 2002

Modification Of Molybdenum Nitride Electrode For Supercapacitor(I)——The Effect Of Ammonium Vanadate On The Properties Of Molybdenum Nitride Electrode, Xue-Liang Li, Dao-Rong Luo, Hua-Lin Wang, Jian-Bo He, Yun-Guei Zhu

Journal of Electrochemistry

The effect of vanadium on the properties of the electrode of molybdenum nitride has been studied by using XRD, SEM and cyclic voltammetry. Modified molybdenum nitride was made as follow: films were coated by dipping titanium sheet in the solution containing different composition of molybdenum oxide, ammonium vanadate, ammonia, glycol and oxalic acid, and coated films are reacted with free ammonia. The results show that the specific capacitance of modified electrode was considerably increased and the operation voltage was broadened with the addition of ammonium vanadate in the dipping solution. The mechanism of these effects generated is the formation of …


Design And Analysis For Melt Casting Metallic Fuel Pins Incorporating Volatile Actinides, Xiaolong Wu Aug 2002

Design And Analysis For Melt Casting Metallic Fuel Pins Incorporating Volatile Actinides, Xiaolong Wu

UNLV Theses, Dissertations, Professional Papers, and Capstones

Fundamental issues related to the selection of a metallic fuel casting furnace design are presented and discussed including heating mechanisms, casting issues, crucible design, and issues related to the mass transport of americium. The process of evaluating all of these different criteria is undertaken to select a concept that would have the greatest chance of success for casting americium in a metallic fuel rod. Based on this evaluation process, a concept for the casting of metallic fuel pins containing high vapor pressure materials is selected and discussed. The important physics of this concept include mass transport of americium from the …


Classification Of Risks For International Construction Joint Ventures Projects, Yasser Abd El Ghany Azmy Elshabassy Jun 2002

Classification Of Risks For International Construction Joint Ventures Projects, Yasser Abd El Ghany Azmy Elshabassy

Archived Theses and Dissertations

No abstract provided.


On The Intrinsic Evolution Of Material Inhomogeneities, Marek Elźanowski, Marcelo Epstein Jun 2002

On The Intrinsic Evolution Of Material Inhomogeneities, Marek Elźanowski, Marcelo Epstein

Mathematics and Statistics Faculty Publications and Presentations

The evolution of a distribution of material inhomogeneities (defects, dislo-cations, etc.) is investigated. Adopting our recently developed model of the anelastic evolution law of a defective solid crystal body and using the classical methods of the theory of hyperbolic waves we analyze such phenomena as the long-term relaxation of defects and the dislocation pile-up.


Syntheses And Photoluminescence Of Zinc Oxide Polyaniline Coaxial Nanowires And Their Array, Zhi-Xin Zheng, Yan-Yan Xi, Ping Dong, Huai-Guo Huang, Jian-Zhang Zhou, Lin-Lin Wu, Zhong-Hua Lin May 2002

Syntheses And Photoluminescence Of Zinc Oxide Polyaniline Coaxial Nanowires And Their Array, Zhi-Xin Zheng, Yan-Yan Xi, Ping Dong, Huai-Guo Huang, Jian-Zhang Zhou, Lin-Lin Wu, Zhong-Hua Lin

Journal of Electrochemistry

A novel nanomaterial, zinc oxide (ZnO) and polyaniline (PANI) coaxial nanowires and their array in the template, was synthesized using anodic aluminum oxide (AAO) membrane as template. The morphology of these coaxial nanowires was observed with transmission electron microscope (TEM). The experiments on photoluminescence (PL) of coaxial nanowires and their array in AAO membrane show that the visible emission band of ZnO shifts from 530 nm to 400 nm and the luminescence is enhanced for the coaxial nanowires array in AAO membrane,and the visible emission band shifts to a lower wavelergth (385 nm) for coatial nanowires in NaOH solution. Possible …


Electrochemical Properties Of Mixed Metal Oxide Coated Titanium Anodes In Seawater, Ting-Yong Wang, Li-Kun Xu, Guang-Zhang Chen May 2002

Electrochemical Properties Of Mixed Metal Oxide Coated Titanium Anodes In Seawater, Ting-Yong Wang, Li-Kun Xu, Guang-Zhang Chen

Journal of Electrochemistry

Mixed metal oxide coated titanium anodes prepared by thermal decomposition were characterized by scanning electron microscopy and electrochemical measurement, while the consumption rate of an anode was also measured in seawater. In order to examine the practical performances of mixed metal oxide-coated anodes, a simulating test on floating dock in seawater has also been carried out. The SEM results indicate that oxide layers exhibited a cracked-mud morphology which endows the anode with good electrocatalytic activity. The electrochemical measurements showed that mixed metal oxide-coated anodes exhibit excellent electrochemical activity and electrochemical stability in seawater. Owing to good corrosion resistance and low …


Development Of 200~500 W Portable Proton Exchange Membrane Fuel Cell Power System, Li-Qing Hu, Li-Rong Zhou, Zheng Li, Jian-Wei Xia, Ming-Zhu Fu, Xin Wu, Yun Zhu May 2002

Development Of 200~500 W Portable Proton Exchange Membrane Fuel Cell Power System, Li-Qing Hu, Li-Rong Zhou, Zheng Li, Jian-Wei Xia, Ming-Zhu Fu, Xin Wu, Yun Zhu

Journal of Electrochemistry

The Properties of the Portable PEM Fuel Cell Power Source are very unique compared with the common primary or rechargeable electro-chemical battery. This paper describes the In this work, of the 200~500 W portable PEM fuel cell power system, was developed. The system mainly composed of four subsystem: 1)Fuel cell stack; 2)Air delivery; 3)Hydrogen source; 4)Heat dissipation and system control.


Studies On Sulfate Reducing Bacteria Influenced Corrosion Of 90/10 Cu/Ni Alloy, Guang-Zhou Liu, Jian-Hua Qian, Yan Ma, Jian-Hua Wu May 2002

Studies On Sulfate Reducing Bacteria Influenced Corrosion Of 90/10 Cu/Ni Alloy, Guang-Zhou Liu, Jian-Hua Qian, Yan Ma, Jian-Hua Wu

Journal of Electrochemistry

Electrochemical techniques such as measurements of corrosion potential,the polarization resistance, and potentiodynamic scanning technique were used to investigate the electrochemical behavior of 90/10 Cu/Ni alloy in Postgate C medium containing sulfate reducing bacteria(SRB). The results showed that the corrosion potential of the alloy changed from -0.20 to -0.75 V(SCE) when bacteria inocula was added, and the polarization resistance Rp decreased obviously, which corresponds to an increased corrosion rate. The shape ofthe anodic polarization curves was drastically changed in the presence of SRB, and an active-passive transition was observed. Electron probe microanalyzer was used to investigate the morphology and chemical …


Self-Assembled Monolayer Of Schiff Bases On Au Electrode, Ke-Qiang Ding, Qing-Fei Wang, Zhen-Bin Jia, Na Tian, Ning Wang, Ru-Ting Tong, Xin-Kui Wang, Hui-Bo Shao May 2002

Self-Assembled Monolayer Of Schiff Bases On Au Electrode, Ke-Qiang Ding, Qing-Fei Wang, Zhen-Bin Jia, Na Tian, Ning Wang, Ru-Ting Tong, Xin-Kui Wang, Hui-Bo Shao

Journal of Electrochemistry

Schiff bases tailored with -SH group, was self-assembled on Au substrate for the first time. The packing degree of this monolayer was described with SEM technique. Spontaneously, the self-assembled monolayer (SAM) was briefly characterized with CV and EIS methods. Though Comparing with the SAM of alkanethiol, the membrane we fabricated was relatively loose, our work is the first step to study Schiff bases by means of self-assembled monolayer.


Effect Of Cl- On The Transition Current Density Of Zn During The Electrodeposition Of Zn-Ni Alloys, Ren-He Yin, Zheng-Hua Fang, Wei-Min Cao May 2002

Effect Of Cl- On The Transition Current Density Of Zn During The Electrodeposition Of Zn-Ni Alloys, Ren-He Yin, Zheng-Hua Fang, Wei-Min Cao

Journal of Electrochemistry

There exists a transition current density of Zn when the normal co-deposition of Zn-Ni alloys at chloride baths turns to anomalous type. The value increases with Cl- concentration, but is independent of pH, this is because the existence of Cl- decreases the evolution overpotential of Ni metal and has a catalytic effect on it.


An Investigation On Sr-Doped Spinel Phase-LisrXMn2-XO4, Hui Zhan, Yun-Hong Zhou May 2002

An Investigation On Sr-Doped Spinel Phase-LisrXMn2-XO4, Hui Zhan, Yun-Hong Zhou

Journal of Electrochemistry

Sr-doped spinel phase-LiSrxMn2-xO4 was successfully prepared by solid-state method. Structural and electrochemical characterizations were carried out. Although Sr2+ has a large ion radius-1.12 , the spinel structure can be well maintained for LiSrxMn2-xO4 sample as far as the x value doesn't surpass 0.05. Electrochemical study presents supporting evidence that doping the stoichiometric LiSrxMn2-xO4 phase with Sr is an effective way to improve the cycleability of LiSrxMn2-xO4 spinel material. A remarkable enhancement of the cycleability with retention of the initial …


Electrosynthesis Of Glyoxylic Acid In A Cooled Cathode Reactor, Jin-Hong Fan, Jun Li, Xue-Yun Chen, Wei Li, Hao-Qi Gao May 2002

Electrosynthesis Of Glyoxylic Acid In A Cooled Cathode Reactor, Jin-Hong Fan, Jun Li, Xue-Yun Chen, Wei Li, Hao-Qi Gao

Journal of Electrochemistry

Glyoxylic acid was produced by electroreduction of oxalic acid in a well designed cooled cathode reactor. The cathodic and anodic electrolytes were super-saturated oxalic acid and hydrochloric acid aqueous solutions separated by a super-acid ion-exchange membrane. The current efficiency and time-space yield of glyoxylic acid were studied under different temperatures of cathode and electrolyte, current densities, materials of cathode. With the cooled cathode reactor, the energy consumption was reduced and higher oxalic acid concentration was available in solution, so that current efficiency was improved. The results indicated that the average time-space yield of glyoxylic acid was about 0.032 kg·dm-3 …


Corrosive Electrochemical Behavior Of Carbon Steel In Microbiological Medium, Jing Liu, Hong-Bo Fan, Hai-Ping Xu, Jia-Shen Zheng, Li-Ming Xu, Zong-Qiang Mao May 2002

Corrosive Electrochemical Behavior Of Carbon Steel In Microbiological Medium, Jing Liu, Hong-Bo Fan, Hai-Ping Xu, Jia-Shen Zheng, Li-Ming Xu, Zong-Qiang Mao

Journal of Electrochemistry

Sulfate-reducing bacteria (SRB)grows and propagates, PH of the solution is dropped from 7.5 to 5.8, and forms the biofilms on carbon steel in culture medium. The micro-environment on the surface of carbon steel is changed under the biofilms, the factors accelerate the formation of the pitting corrosion. When the biofilm on carbon steel is cleaned out, the surface of carbon steel have the non-uniform pitting corrosion. The activity of SRB and the porous structure of biofilms induced the initiation and development of the pitting corrosion of carbon steel. The process of microbiologically induced corrosion (MIC) involves the development of SRB …


Electrocatalytic Oxidation Of Formaldehyde On The Proline Film Modified Electrode, Yu-Rong Ma, Qiu-Xia Yang, Guo-Bao Li, Zheng-Kai Xi, Xue-Lin Wang May 2002

Electrocatalytic Oxidation Of Formaldehyde On The Proline Film Modified Electrode, Yu-Rong Ma, Qiu-Xia Yang, Guo-Bao Li, Zheng-Kai Xi, Xue-Lin Wang

Journal of Electrochemistry

The proline film modified electrode and its electrochemical behavior was studied by cyclic voltammetry and spectroelectrochemistry. After incorporation of Ni(Ⅱ), the cyclic voltammograms of the proline Ni(Ⅱ) film electrode exhibited a typical redox peak, which appeared at potential of 0.52 V anodic and 0.44 V cathodic in NaOH. The formal potentials E' were linearly dependent on the pH, and the peak currents ip were linearly dependent on the square root of the scan rates, thus charge transfer in the film was controlled by diffusion. The diffusion coefficient is figured out to be 2×10-10 cm2·s-1. The …


Preparation,Structure And Properties Of Electrochromic Rhodium Oxide Films, Hai-Hong Wang, Tao Wang, Man-Ming Yan, Zhi-Yu Jiang May 2002

Preparation,Structure And Properties Of Electrochromic Rhodium Oxide Films, Hai-Hong Wang, Tao Wang, Man-Ming Yan, Zhi-Yu Jiang

Journal of Electrochemistry

Electrochromic rhodium oxide films were prepared on ITO substrate by sol-gel method. The films exhibited reversible two-color (bright yellow at reduction and dark green at oxidation) electrochromic behavior in alkaline solution with good cycle stability. In-situ XRD, TGA-DTA, IR, XPS methods were used for studying the structure and chemical process of the films. The diffusion coefficient during the electrochromic process was measured by electrochemical impedance spectra method. It was found that the rhodium oxide films may be suitable for the use in electrochromic devices.


Recent Developments In The Electrolyte For Lic6/Electrolyte/Cathode Battery, Cui-Ying Wang, Sheng-Liang Zhao, Guang-Ming Zhu, Jin-Kua You, Zu-Geng Lin May 2002

Recent Developments In The Electrolyte For Lic6/Electrolyte/Cathode Battery, Cui-Ying Wang, Sheng-Liang Zhao, Guang-Ming Zhu, Jin-Kua You, Zu-Geng Lin

Journal of Electrochemistry

We present a reviewed the development and status of electrolyte for LiC 6/electrolyte/cathode battery. The effect of the salt, solvent, additive and impurity on the conductivity of the electrolyte, formation of the solid-electrolyte-interphase (SEI) and cycle life of the battery were described.


A Blend Conducting Membranes For Direct Methanol Fuel Cells, Lei Li, Jun Zhang, Hong Wu, Yu-Xin Wang May 2002

A Blend Conducting Membranes For Direct Methanol Fuel Cells, Lei Li, Jun Zhang, Hong Wu, Yu-Xin Wang

Journal of Electrochemistry

An attempt was made to modify membranes for direct methanol fuel cells by blending Nafion or polystyrene sulfonic acid (PSSA) with polyvinylidene fluoride (PVDF) from their solutions. The proton conductivity and methanol barrier property as a function of the membrane compositions are discussed. Compared with the Nafion 117 membrane, the PVDF-Nafion blend membranes with 25 wt% of Nafion showed a decrease in the conductivity by about 2 orders of magnitude, and the methanol barrier properties increased about 3 orders of magnitude. If the ratio (σ/P) is adopted to characterize the performance of the membrane, the PVDF-PSSA and PVDF-Nafiion blend membranes …


Yucca Mountain Ventilation Studies Support And Associated Code Enhancements, George Danko Mar 2002

Yucca Mountain Ventilation Studies Support And Associated Code Enhancements, George Danko

Publications (YM)

The Task 20 project was prematurely closed by DOE on the basis of becoming critical data to the Yucca Mountain project. Task 20 indeed delivered the first, published hydrothermal-ventilation model, MULTIFLUX V1.0 and V1.1 to BSC during 2001 to support the AMR Rev01 report. The numerical model is designed to predict temperature and humidity distributions in and around the emplacement drifts and on the waste packages stored in a ventilated, high-level nuclear waste repository.


Effects Of Shot-Peening On High Cycle Fretting Fatigue Behavior Of Ti-6al-4v, Halil I. Yuksel Mar 2002

Effects Of Shot-Peening On High Cycle Fretting Fatigue Behavior Of Ti-6al-4v, Halil I. Yuksel

Theses and Dissertations

Effects of Shot-peening on High Cycle Fretting Fatigue behavior of Ti-6Al-4V were investigated. Experiments were performed with 6.35 mm thick specimens which provided S/N curves. After the tests, it was observed that the specimens failed near the trailing edge of contact. Scanning Electron Microscopy showed that cracks initiated on the contact surface for 6.35 mm, and at the depth of specimen ranging from 200 to 300 microns for 3.81 mm thick specimens. Initial crack orientation was around 37 and 42 degrees respectively for 6.35 and 3.81 mm thicknesses. Finite Element Analysis (FEA) was conducted, and using FEA results, Smith-Watson-Topper, Findley, …


Examination Of Contact Width On Fretting Fatigue, Russell S. Magaziner Mar 2002

Examination Of Contact Width On Fretting Fatigue, Russell S. Magaziner

Theses and Dissertations

The primary goal of this study was to find the effects on the fretting fatigue life when systematically holding the fretting fatigue variables, peak contact pressure, maximum/minimum nominal bulk stress, and the ratio of shear traction to pressure force constant while varying the contact semi-width through changes in pad radius and normal load. Experimental tests were performed on a test setup capable of independent pad displacement. Analytical and finite element simulations of the different experimental tests were performed. The local mechanistic parameters were inspected. Five different critical plane based fatigue predictive parameters lacked effectiveness in predicting changes in life with …


Photocurrent Enhancement By Ticl4 Post-Treatment For Tio2 Nanoporous Film Electrode, Yan-Jie Ren, Li Zhang, Sheng-Min Cai Feb 2002

Photocurrent Enhancement By Ticl4 Post-Treatment For Tio2 Nanoporous Film Electrode, Yan-Jie Ren, Li Zhang, Sheng-Min Cai

Journal of Electrochemistry

Enhanced photocurrent in dye-sensitized photoelectrochemical cell was obtained by post-treating the TiO2 nanoporous film electrode with TiCl4. By investigating the effect of the post-treatment on surface area, pore size distribution, laser pulse induced current transient of the film electrode, photocurrent increase by the post-treatment was assigned to the improved electron percolation resulting from broadening of interparticle neck.


An Investigation Of Inhibition Mechanism Of Cerium For Aluminum Alloy 2024-T3, Min-Hua Shao, Yan Fu, Rong-Gang Hu, Chang-Jian Lin Feb 2002

An Investigation Of Inhibition Mechanism Of Cerium For Aluminum Alloy 2024-T3, Min-Hua Shao, Yan Fu, Rong-Gang Hu, Chang-Jian Lin

Journal of Electrochemistry

Cerium compounds are promising inhibitors for aluminum alloy. However, the inhibition mechanism is not very clear. Scanning microreference electrode (SMRE) technique was used to probe the potential imaging of Al 2024 T3 in NaCl and CeCl3 solution. The results of SMRE showed that in NaCl solution a severe localized corrosion occurred on the surface of Al 2024 specimen at once and maintained for a long time. The corrosion activity of Al alloy in CeCl3 decreased with immersion time and disappeared finally. Additionally, the competition of inhibition and aggression between Ce3+ and Cl- on Al alloy was …


Electrosynthesis Of Glyoxylic Acid In A Packed Bed Reactor, Jin-Hong Fan, Jun Li, Yu-Zhong Su, Hao-Qi Gao Feb 2002

Electrosynthesis Of Glyoxylic Acid In A Packed Bed Reactor, Jin-Hong Fan, Jun Li, Yu-Zhong Su, Hao-Qi Gao

Journal of Electrochemistry

Glyoxylic acid was produced by electroreduction of oxalic acid in a packed bed reator. The cathodic and anodic electrolytes were super-saturated oxalic and hydrochloric acid aqueous solutions separated by a super-acid ion-exchange membrane. The current efficiency and yield of glyoxylic acid were studied under different structured packed bed reactors and different electrode materials, temperatures and current densities. The results indicated that the current efficiency of synthsis of glyoxylic acid was over 66.2% and the concentration of glyoxylic acid could reach 2.02% after 45min electrolysis with cathode of lead particles and anode of graphite board under conditions of temperature 32 ℃, …


Effect Of The Brightener On The Behavior Of The Silver Electrodeposition, Jin Hu, Hui-Min Wu, Xiang-Ming Feng, Wei-Dong Li, Zheng-Zhong Zuo, Yun-Hong Zhou Feb 2002

Effect Of The Brightener On The Behavior Of The Silver Electrodeposition, Jin Hu, Hui-Min Wu, Xiang-Ming Feng, Wei-Dong Li, Zheng-Zhong Zuo, Yun-Hong Zhou

Journal of Electrochemistry

The effect of the brightener on the behavior of the silver electrodeposition in cyanide solution was studied by potentiostatically step and rotating dise electrode (RDE) as well as X-ray diffraction (XRD) and scanning electron microscope (SEM). It was found that the silver electrodeposition was not changed by the addition of the brightener to the fundarmental solution. But it apparently increased the solution's micro-leveling effection and remarkably improved the coating's surface lightness. The coating's orientation isn't changed by the addition of the brightener in the light of the XRD result. The effectivness of the brightener was also discussed by the half-wideth …