Engineering Commons^™

Integrating Off-Spec Scms Into Plc Blends, George A. Qubty

Civil Engineering Theses - Archive

Off-spec supplementary cementitious materials (SCMs) remain underutilized due to variability in reactivity and non-conformance with existing standards. This study evaluates the hydration behavior and fresh-state and mechanical performance of these materials in Portland limestone cement (PLC) systems. One Class F fly ash (FA), one bottom ash (BA), and two calcined clays (HACC and LACC) were evaluated as 20 % replacements to PLC. Hydration behavior was characterized using isothermal calorimetry and thermogravimetric analysis (TGA), while fresh-state and mechanical performance were assessed through flow table, Vicat setting time, load–crack mouth opening displacement (CMOD) flexural testing, and compressive strength testing. HACC increased compressive …

Machine Learning Modeling For Hydrolysis Recycling Of Pet Waste, Jie Li, Lanjia Pan, Hossein Abedsoltan, Hailong Wang, Taiyang Liu, Xiangzhou Yuan, Yong Sik Ok, Yin Wang

Chemical and Biochemical Engineering Faculty Research & Creative Works

The hydrolysis of polyethylene terephthalate (PET) into terephthalic acid (TPA) can efficiently recycle waste PET, but achieving high conversion efficiency through smart reaction design remains challenging. To develop a robust and accurate machine learning (ML) model for the in-depth understanding and intelligent design of PET hydrolysis, we compiled a new dataset comprising 942 data points and comprehensive information of 44 variables involved in heating type, acid/base catalyst (ABC), organic solvent (OS), co-solvent (CS), phase transfer catalyst (PTC), and operational conditions. The developed Neural Network model demonstrated the best performance in predicting PET conversion, with a testing determination coefficient (R^{2 …}

Thermo-Rheological And Tribological Properties Of Low- And High-Oleic Vegetable Oils As Sustainable Bio-Based Lubricants, Abiodun Saka, Tobechukwu K. Abor, Anthony C. Okafor, Monday U. Okoronkwo

Mechanical and Aerospace Engineering Faculty Research & Creative Works

Vegetable oil-based lubricants have attracted increased research attention in recent decades as sustainable alternatives to conventional petroleum-based lubricants in metal machining. However, more studies are required to fully elucidate the thermo-rheological and tribological properties. This study presents an investigation of the thermo-rheological and tribological properties of different vegetable oils, including low- and high-oleic soybean oil, high-oleic sunflower, safflower, and canola oils. The lubricity, and evolution of viscosity and thermodynamic properties as a function of temperature were investigated to obtain important parameters including the viscosity index, flow behavior index, flow activation energy, specific heat capacity, thermal conductivity, coefficient of friction, contact …

Development Of Microfluidic Device To Monitor The Contamination In Drinking Water Using Impedance Spectroscopy, Pornpipat Oupchan

Chulalongkorn University Theses and Dissertations (Chula ETD)

Microplastic contamination is a growing concern, as microplastics have been found in brain tissue and can enter the body through consumption. The objective of this research is to develop a microfluidic device to monitor microplastic particles by using electrical impedance spectroscopy principles. The device operates based on a flow-through principle. The configuration of electrode consists of copper-based cylindrical electrode with diameter of 300 micrometer and a center-to-center spacing of 2000 micrometer. The electrodes are designed to be replaceable. The microchannel has a rectangular cross-section with a width of 2000 micrometer and a height of 1000 micrometer. The microfluidic device was …

การทำความเย็นส่วนบุคคลโดยใช้วัสดุเปลี่ยนสถานะสำหรับบุคลากรที่สวมใส่ชุดป้องกันการติดเชื้อส่วนบุคคล, พรพุทธ วิสุทธิวัชรกุล

Chulalongkorn University Theses and Dissertations (Chula ETD)

ชุดป้องกันส่วนบุคคล (PPE) เป็นอุปกรณ์สำคัญที่ช่วยลดความเสี่ยงในการติดเชื้อของบุคลากรทางการแพทย์ อย่างไรก็ตาม การสวม PPE เป็นเวลานาน โดยเฉพาะในสภาพอากาศร้อนและชื้นอย่างประเทศไทย มักนำไปสู่การกักเก็บความร้อนในร่างกาย การระบายความร้อนลดลง และเกิดความไม่สบาย ความเหนื่อยล้า รวมถึงภาวะเครียดจากความร้อน งานวิจัยนี้จึงได้พัฒนาแบบจำลองชีวความร้อนอย่างง่าย (simplified bioheat model) โดยอ้างอิงโครงสร้างแบบจำลองแบบ passive ของ Fiala และเสริมด้วยการตอบสนองทางสรีรวิทยาแบบ active ที่จำเป็น เพื่อใช้ทำนายอุณหภูมิของร่างกายและประเมินความสบายทางความร้อนเมื่อสวม PPE ร่วมกับการระบายความร้อนด้วยวัสดุเปลี่ยนสถานะ (Phase Change Material: PCM) ผลการตรวจสอบความถูกต้องเทียบกับแบบจำลองอ้างอิงของ Fiala แสดงให้เห็นว่าแบบจำลองที่พัฒนาขึ้นมีความแม่นยำดี โดยมีความคลาดเคลื่อนของอุณหภูมิอยู่ภายใน ±0.2°C นอกจากนี้ผลการจำลองยังพบว่า PCM สามารถลดความเครียดจากความร้อนและเพิ่มความสบายทางความร้อนอย่างมีนัยสำคัญในช่วง 60 นาทีแรกของการทำงาน แม้ว่าประสิทธิภาพจะลดลงเมื่อ PCM หลอมละลายเต็มที่ก็ตาม ข้อจำกัดของงานวิจัยนี้ คือ แบบจำลองตั้งอยู่บนสมมติฐานของสภาวะอากาศร้อน (เริ่มต้นที่ 30°C) ทำให้ยังไม่สามารถแทนสภาวะอากาศเย็นได้อย่างสมบูรณ์ อีกทั้งไม่ได้พิจารณาการตอบสนองทางสรีรวิทยาระยะยาว เช่น ภาวะขาดน้ำ ความเหนื่อยล้า หรือความเครียดเชิงกลจากน้ำหนัก PCM ที่เพิ่มขึ้น ถึงแม้จะมีข้อจำกัดดังกล่าว แบบจำลองนี้ยังคงสามารถทำนายอุณหภูมิร่างกายและค่าความรู้สึกทางความร้อนแบบพลวัต (DTS) ได้อย่างมีประสิทธิภาพก่อนการใช้งานจริง จึงสามารถนำไปใช้เป็นเครื่องมือช่วยวางแผนระยะเวลาการทำงานที่ปลอดภัย และช่วยกำหนดปริมาณ รวมถึงตำแหน่งการติดตั้ง PCM ที่เหมาะสม ผลลัพธ์จากงานวิจัยนี้สามารถเป็นฐานข้อมูลสำคัญสำหรับการออกแบบชุด PPE ที่ปลอดภัย และช่วยลดภาระความร้อนสำหรับบุคลากรทางการแพทย์ในสภาพแวดล้อมร้อนชื้นได้ดียิ่งขึ้น

Microwave-Assisted Reduction Of Critical Metal Oxides From E-Waste Mixture, Kurundu Shavinka Jayasekera

Graduate Theses, Dissertations, and Problem Reports (ETD)

The efficient recovery of critical metals such as tantalum (Ta), manganese (Mn), gallium (Ga), and indium (In) from electronic waste (e-waste) is essential for resource sustainability and environmental protection. This research uses microwave-assisted treatment to investigate the carbothermal reduction of these four specific metals from their oxides in a simulated e-waste mixture, with carbon black serving as both a microwave coupling and reduction agent. Microwave processing is used specifically because it offers a rapid and energy-efficient alternative to conventional thermal methods, with the benefits of intrinsic heating and selective heating of materials. The first experiments centered on understanding the effects …

Enhancement Of Mechanical, Structural, And Electrical Properties In Advanced Composites And Vat Photopolymerized 3d Printing Nanocomposites, Poom Narongdej

CGU Theses & Dissertations

Advanced composites have gained significant attention across various industries, including aerospace, automotive, clean energy, and healthcare, owing to their exceptional mechanical properties and versatility. Fiber-reinforced polymer (FRP) composites, particularly those reinforced with carbon fibers, are extensively used as structural materials in spacecraft, aircraft, high-performance vehicles, and wind turbines due to their high strength-to-weight ratios, stiffness, durability, and tailorable mechanical characteristics. In healthcare, the advent of additive manufacturing (3D printing) has expanded the utility of advanced composites, enabling precise customization of components to meet patient-specific needs while offering design flexibility and ease of fabrication. Despite these advantages, several challenges hinder the …

Photocatalytic Performance Of Ba₀.₈Ca₀.₂Tio₃ Composite For Norfloxacin Removal In Aqueous Solutions, Raj Mohanty, Swayam Aryam Behera, Asima Subhadarshini, Binita Nanda, P. Ganga Raju Achary

Journal of Metals, Materials and Minerals

This study investigates the degradation of norfloxacin using a Ba0.8Ca0.2TiO3 (BCTO) perovskite composite synthesized via a simple solid-state method. Variety of characterization techniques, including photoluminescence spectra, powder X-Ray Diffraction, UV-Vis Diffuse Reflectance Spectra, FE-SEM and Fourier-Transform Infrared spectra confirm the structural and optical properties of BCTO. Electrical characterization further elucidates its conductive properties. The BCTO composite demonstrates an impressive 87% degradation rate of norfloxacin, attributed to its reduced electron-hole recombination, enhanced light harvestation, and improved charge carrier mobility. Kinetic studies indicate that the degradation process adheres to a pseudo-first-order model, with BCTO outperforming both pure BaTiO3 and conventional photocatalysts. These …

Improving The Mechanical Performance Of 45s5 3d Scaffolds Through The Particles Of Barium Titanate Ceramics, Surirat Yotthuan, Usanee Pantulap, Nuttawan Sawangboon, Ornuma Tungsanguan, Ekarat Meechoowas, Kansiree Kaewmorakot, Nathaporn Uthaichai, Theerachai Bongkarn

Journal of Metals, Materials and Minerals

Bioglass® 45S5 is widely used in bone tissue engineering due to its excellent bioactivity. However, its low mechanical strength remains a major limitation. In this study, 25 wt% barium titanate (BaTiO3; BT) was incorporated into 45S5 scaffolds to improve mechanical performance and modulate bioactivity. The 3D scaffolds were fabricated using the foam replication method and exhibited interconnected porosity, with average pore sizes of 471 ± 94 μm (45S5) and 598 ± 58 μm (45S5/BT25), closely resembling human bone. The addition of BT increased the density and compressive strength of the scaffolds to 2.89 ± 0.18 g∙cm‒3 and 2.0 ± 0.2 …

The Effect Of Pt And Pd Decoration On Sno2 Slant Nanorods Fabricated Using Dc Magnetron Sputtering With Oad Technique For Co Gas Sensing Applications, Nampueng Pangpaiboon, Thitiporn Kaewyou, Sethavut Duangchan, Kata Jaruwongrungsee, Manatsawee Srirak, Tossaporn Lertvanithphol, Viyapol Patthanasettakul, Tawee Pogfay, Mati Horprathum, Saksorn Limwichean

Journal of Metals, Materials and Minerals

This research investigates the effect of Pt and Pd decoration on the structure of SnO2 slant nanorods (SNRs) films produced using DC magnetron sputtering with Oblique Angle Deposition (OAD), as well as their impact on the films' physical properties and gas sensing applications. Pt and Pd were deposited onto the SnO2 SNRs for the same duration of 20 s each. Following deposition, all the films were heat-treated temperature at 400℃ for 2 h. The characterization of both as-deposited and annealed films involved analyzing the physical morphology using FE-SEM and the crystal structure using GI-XRD. It was observed that the structure …

Eco-Friendly Synthesis Of Flower-Like Hierarchical Structure Of Cuo Nps For Advancing Photocatalytic Efficiency And Antibacterial Applications, Yodchai Tangjaideborisut, Shanmugam Shanmugam, Supakorn Boonyuen, Govindasamy Siva, Prema Yugala, Joon Ching Juan, Choowin Phanawansombat, Atchariya Pitintharangkul, Seerangaraj Vasantharaj, Pornpan Pungpo, Pariya Na Nakorn

Journal of Metals, Materials and Minerals

In recent decades, environmental pollution caused by organic dyes and pathogenic microorganisms has posed significant challenges to both ecological and public health. Therefore, the development of multifunctional materials capable of simultaneously degrading dyes and exhibiting antibacterial properties is crucial for effective environmental remediation. Combining photocatalytic dye degradation with antibacterial activity offers a promising approach to address these dual concerns in a single process. The present study investigates the copper oxide nanparticles (CuNPs) were prepared by green synthetic method using bamboo extract for degradation of methylene blue and in inactivation of biological pathogens. The green synthesized CuONPs were characterized various spectroscopic …

Comprehensive Study On The Structural And Optical Properties Of Bismuth Manganese Oxide Composite Ceramic For Optoelectronic Applications, P. P. Nayak, B. Swain, R. R. Patro, S. S. Hota, O. P. Das, S. Bhuyan

Journal of Metals, Materials and Minerals

This work assessed the potential of bismuth manganese oxide composite ceramic for optoelectronic applications by methodically examining its structural, vibrational, and optical characteristics. X-ray diffraction (XRD) spectroscopy provided the coexistence of Bi12MnO20 (sillenite-type) and Bi2Mn4O10 (mullite-type) phases, indicating a deviation from the ideal perovskite structure and suggesting a complex crystallographic nature influencing its functional properties. Fourier transform infrared (FTIR) spectroscopy confirmed the modes of vibration of Bi–O and Mn–O bonds that were contained, supporting the structural composition. UV-Vis-NIR spectroscopy demonstrated strong optical absorption in the 300 nm to 800 nm range, affirming the suitability of the material for optoelectronic applications. …

Synthesis And Characterization Of Silica Nanoparticles From Solar Panel Glass Cullet, Pathomporn Ussawanawachat, Nithiwach Nawaukkaratharnant, Apirat Theerapapvisetpong

Journal of Metals, Materials and Minerals

The rapid growth of solar energy as a renewable resource has led to a significant increase in discarded solar panels. Recycling their glass components, especially fine cullet fragments, remains a major challenge due to impurity levels and processing limitations. This study proposes a sustainable approach to recycle solar panel glass cullet into high-purity silica nanoparticles using alkali fusion followed by acid precipitation. Process conditions including cullet to NaOH ratio, fusion temperature, and surfactant addition were optimized. The highest silica yield of 60.26% was achieved at a 1:1.4 cullet to NaOH ratio and 500℃. Polyethylene glycol (PEG 1000) was used as …

Laser Ablation Behavior And Ablation Threshold Of Entropy-Controlled Perovskite Coatings, Shuo Wang, Junyang Lu, Mengqing Zhang, Jiayi Zheng, Tong Zhang

Journal of Metals, Materials and Minerals

The protection threshold of laser ablation resistant materials lags behind the development of laser power density. Single-functional laser ablation resistant materials can no longer meet the practical needs. High-entropy perovskites with infinite chemical composition, tunable bandgap structure, and efficient thermal management capabilities provide new ideas for developing novel high-reflectivity and low-thermal-conductivity multifunctional laser ablation resistant materials. Herein, leveraging these unique advantages of high-entropy perovskites in optics and thermodynamics, four entropy-controlled perovskite coatings, Ba(Zn1/2Ta1/2)O3 (BZTO), Ba(Zn1/3Ta1/3Nb1/3)O3 (BZTNO), Ba(Zn1/4Ta1/4Nb1/4Ti1/4)O3 (BZTNTO) and Ba(Zn1/5Ta1/5Nb1/5Ti1/5Zr1/5)O3 (BZTNTZO) are designed. Through time-dependent laser ablation experiments, the optical and thermal properties are comprehensively evaluated. And laser ablation behavior …

Optically Stimulated Luminescence Dating Of Earthenware From The Nam Tok Khao Pang Archaeological Site, Kanchanaburi, Thailand, Thananan Phetkongtong, Peerasak Klubket, Santi Pailoplee, Pichet Limsuwan, Voranuch Thongpool

Journal of Metals, Materials and Minerals

The Nam Tok Khao Pang archaeological site, located in Tha Sao subdistrict, Sai Yok district, Kanchanaburi province, Thailand, is a limestone cave where numerous artifacts, including black-burnished earthenware fragments with in-curving rims, out-curving rims, and carinated bodies, have been discovered. Mineralogical and microstructural analyses using X-ray diffraction (XRD), energy-dispersive X-ray spectroscopy (EDS), and scanning electron microscopy (SEM) identified quartz (SiO₂) as the dominant mineral phase within a partially sintered silicate matrix. The absence of vitrification and the presence of mineral impurities indicate that the earthenware was fired at temperatures between 900°C and 1000°C. To determine the age of these ceramics, …

Downstreaming Of Natural Materials Huta Ginjang Quartz Sand Doped With Nd2o3 For Laser Medium Application, Juniastel Rajagukguk, Jakrapong Kaewkhao

Journal of Metals, Materials and Minerals

The QSBoBa glasses with chemical formula 10 Quartz sand + (50-x) B2O3 + 10BaO + 30Na2O + xNd2O3 (x = 0, 0.5, 1, 1.5, and 2 mol%) were prepared by a conventional melt-quenching technique. The successfully fabricated glass samples will be analyzed based on their physical, structural, optical and luminescent properties. The XRD and FTIR spectra have been included to observe the complete structural properties. Optical absorption spectra revealed several characteristic transitions, with a prominent hypersensitive transition 4I9/2→4G5/2 at 584 nm, indicating an increasing asymmetry and disorder at higher Nd3+ concentrations. The photoluminescence emission spectra demonstrated strong radiative transitions of …

Crack Development Of Electroplated Niw Alloys And Their Wettability And Tribological Properties, Jidsucha Darayen, Suwat Ploypech, Martin Metzner, Claudia Beatriz Dos Santos, Petch Jearanaisilawong, Yuttanant Boonyongmaneerat

Journal of Metals, Materials and Minerals

This study investigates how sodium tungstate concentration (20–46 wt.%) and current density (40–60 A/dm²) affect the microstructure, wettability, mechanical properties, and tribological behavior of electrodeposited Ni-W coatings. Results show that increasing current density markedly raises crack density (from <100 to >400 cracks/cm²), while tungstate concentration has minimal effect. XRD confirms Ni-W solid solution formation, with higher tungsten content refining grains and increasing hardness—peaking at 900 HV at 50 A/dm² (an 80% rise from 500 HV at 40 A/dm²). However, excessive stress at 60 A/dm² leads to microcracking and hardness plateauing (~650–700 HV). Higher crack density improves wettability (contact angle ~17°), enhancing lubricant …

Facile Bio-Synthesis Of Cerium Oxide Nanoparticles, Characterization And Their Photocatalytic Potential In The Degradation Of Real Tannery Wastewater, Ganeshkumar Govindasamy, A. Babu Ponnusami

Journal of Metals, Materials and Minerals

The sustainable metal oxide photocatalysts using plant extract presents a viable alternative to conventional chemical synthesis techniques. In this study, spherical shaped cerium oxide nanoparticles were synthesized using ammonium ceric nitrate and Peepal Leaves (PL) extracted and used as a photocatalyst to remove hexavalent chromium and chemical oxygen demand from actual tannery wastewater. The characterization of cerium oxide nanoparticles was carried out using UV-Visible spectroscopy, X-ray diffraction, Fourier-transform infrared spectroscopy, Brunauer-Emmett-Teller surface area analysis, Field Emission-Scanning Electron Microscopy with energy-dispersive X-ray spectroscopy, Raman analysis, High Resolution-Transmission Electron Microscopy and Zeta potential analysis. The band gap energy of 3.25 eV was …

Upcycled Waste-Derived Triboelectric Nanogenerator For Sustainable Energy Harvesting, Archana Panda, Basanta Kumar Panigrahi, Subhendu Pati, Sunit Gourav Mohanty, Kushal Ruthvik Kaja

Journal of Metals, Materials and Minerals

The proliferation of disposable paper-based materials in laboratories has raised significant environmental concerns due to their rapid discard and accumulation. This study explores the upcycling of commonly discarded laboratory waste, specifically butter paper and polyurethane (PU) foam, into a single-electrode triboelectric nanogenerator (TENG) for mechanical energy harvesting. The fabricated device employs butter paper as the positive triboelectric layer and PU foam as the negative layer, with an aluminium tape electrode. Electrical tests reveal a peak voltage of 21 V and current of 47 nA, reaching a maximum power of 438 nW at 500 MΩ load. The TENG demonstrates stable performance …

The Effects Of Starting Microstructure On The Results Of Double Intercritical Annealing Process Of 0.107%C-2.39%Mn-0.453%Si Dual Phase Steel, Wichayut Chumoung, Nithi Saenarjhan

Journal of Metals, Materials and Minerals

This study investigates and compares the effects of the starting microstructure on the double intercritical annealing (DIA) process on the microstructure and mechanical properties of 0.11%C-2.39%Mn-0.45%Si dual phase steel. The specimens were austenitized, followed by water quenching (WQ) or air cooling (AC), then DIA at 730°C. For the WQ method, high cooling rate results in the formation of a high strength martensitic structure. Conversely, AC method yields a moderate cooling rate, forming a bainitic structure. After single intercritical annealing (SIA), the microstructure transformed into ferrite and martensite. WQ method specimens contain high stress concentration, leading to earlier recrystallization compared to …

Effects Of Thickness On The Performance Of Sno2 Gas Sensors Using Low-Temperature Co-Fired Ceramic, Montri Aiempanakit, Kittiyaporn Singsumphan, Chutima Nakmuk, Cheewita Suwanchawalit, Manatsawee Srirak, Kata Jaruwongrungsee, Anurat Wisitsoraat, Monrudee Liangruksa, Chawarat Siriwong

Journal of Metals, Materials and Minerals

This study develops SnO2-based gas sensors integrated with a low-temperature co-fired ceramic (LTCC) micro hotplate for ethanol detection. SnO2 nanoparticles were synthesized using a simple precipitation method, and sensing layers with varying thicknesses around 0.24 µm, 0.71 µm, and 1.20 µm were applied to evaluate their influence on performance. The results show that the optimal configuration is a 0.71 µm layer, offering high sensitivity, fast response, and efficient recovery. Operating at a low voltage of 3.2 V, the sensors exhibit low power consumption, suitable for portable and battery-operated applications. The gas-sensing mechanism relies on changes in resistance due to interactions …

Atmospheric Corrosion Of Hot Dip Galvanized Structural Steel Exposed To The Tropical Climate Of Thailand, Adithep Bunphot, Pakawat Sancharoen, Somnuk Tangtermsirikul, Taweep Chaisomphob

Journal of Metals, Materials and Minerals

Hot dip galvanized steels were tested in the atmospheric tropical climate environments of Thailand for 12 month from March 2021 to March 2022. Three locations were studied, i.e. a rural area at Saraburi in the central part, an industrial area at Chonburi in the eastern part, and a coastal/urban area at Songkhla in the southern part of Thailand. The thickness loss of the galvanized steel samples was measured by the weight loss method. Types of corrosion products observed on the samples were zincite, wulfingite, hydrozincite, and simonkolleite. All of them were found on the sample at Songkhla. Three of them, …

Structural And Dynamic Analysis Of Tapered Mast Bladeless Wind Turbines Using Fea And Cfd For Renewable Energy Generation, A. Pradeep, Raman Kumar, P. S. Satheesh Kumar, Nagaraj Patil, Vijayakumar Sivasundar, P. Vijaya Kumar, Selvaraj Manickam, Debasish Shit

Journal of Metals, Materials and Minerals

The present analysis investigates the possibility of using a tapered mast profile for bladeless wind turbines (BWTs) to enhance the function of extracting wind energy through the phenomenon of vortex-induced vibrations. Conventional HAWTs which remain the most efficient are however, costly in maintenance, mechanically complicated and rather unfavourable to the environment. To overcome these challenges a prototype BWT with a 0.6 m tapered mast was developed for the currents using mild steel and hollow square steel sections. Wind tunnels were also used to compare stress distribution, structural deformation and vane vortex shedding for the building at different wind speeds. The …

Efficacy Of Bifeo3 And Bi4ti3o12 Towards Photocatalytic Degradation Of Mg And Mb Dyes: A Comparative Study Under Solar Irradiation, Rasmirekha -, Rishabh Kamal, Debapriya -, Suresh Kumar Dash

Journal of Metals, Materials and Minerals

Bismuth-based perovskite material has been used as promising photocatalysts for photo catalytic degradation of toxic dyes with tailored crystallites and fine-tuned band gap for superior activity. BiFeO3 and Bi4Ti3O12 were synthesized by a simple sol-gel method and their crystal structure, morphology, and optical property were characterized by XRD, SEM, TEM, FTIR, EDS and UV–DRS. The XRD pattern exhibits the formation of rhombohedral and orthorhombic phase of bismuth ferrite and bismuth titanate. The study confirms the formation of non-uniform BiFeO3 and Bi4Ti3O12 nanoparticles with uniform particle distribution, with band gap energy (Eg) of 2.2 eV and 2.9 eV, respectively, from UV-DRS …

Lactic Acid-Assisted Complexation For Enhanced Lithium Extraction And Its Application To Spent Libs, Sibananda Sahu, Niharbala Devi

Journal of Metals, Materials and Minerals

A novel approach for complexing lithium with lactic acid to enhance extraction efficiency and its application to spent LIBs was proposed in this study. Key parameters influencing the extraction were systematically examined, including lactic acid concentration, pH of the aqueous phase, concentration of extractant, diluent selection, phase ratio between organic and aqueous phase, and stripping efficiency. Lithium extraction showed a remarkable improvement, rising from 16% to 43%, as the lactic acid concentration enhanced from 0.01 mol∙L‒1 to 1.0 mol∙L‒1. This was achieved using D2EHPA (0.1 mol∙L‒1)  at a maintained pH of 6.5. Maximum lithium extraction of 84.5% was observed at …

Development Of Ceramic Based Novel Materials For Application In Low Temperature Solid Oxide Fuel Cell (Ltsofc) – A Critical Review, Kaliappan Tamilselvan, Arputharaj Samson Nesaraj

Journal of Metals, Materials and Minerals

In the field of renewable energy, fuel cell research has emerged as a promising source of energy for the future. Fuel cells utilize fuels more efficiently compared to other energy generation systems. Solid oxide fuel cell (SOFC) systems are gaining prominence due to their applications in military operations, mobile power supplies, and stationary power generation. Significant research efforts are being made to lower the operating temperature of SOFCs from 1000℃ to approximately 600℃, leading to the development of low-temperature solid oxide fuel cells (LTSOFCs). This is being achieved by selecting alternative electrode and electrolyte materials, particularly ceramics, to enhance their …

The Effect Of Asphalt Emulsion On The Properties Of Fly Ash Based Geopolymers, Natcha Prommityat, Chiravoot Pechyen, Pitak Laoratanakul, Benya Cherdhirunkorn

Journal of Metals, Materials and Minerals

This research aimed to study the effect of asphalt emulsion (AE) on the properties of fly ash based geopolymers. Solid waste materials used for the production of geopolymer were coal fly ash (FA) 70 wt% and bagasse ash (BA) 30 wt%. Alkaline solution used for the geopolymerization reaction was the mixture of 10 M NaOH and Na2Sio3

with the ratio of 1:2. The liquid and solid (L/S) ratios of 0.6, 0.7 and 0.8 were prepared. The AE of 1 wt%, 3 wt% and 5 wt% were added into the raw materials mixtures. Then, the mixed slurry was casted into a …

Synergistic Effects Of Co-Ni Nanoalloys On Sio2@Tio2: A Novel Approach To Photocatalytic Tetracycline Degradation, Pratyush Kumar Sahu, Alaka Rath, Aslisha Champati, Ashish Madual, Pravat Manjari Mishra, Abanti Pradhan, Brundabana Naik

Journal of Metals, Materials and Minerals

To develop a cost-effective alternative to noble metal catalysts for photocatalysis, we synthesized a series of bimetallic Co-Ni nanoalloys on core-shelled SiO2@TiO2 nanostructures via a chemical reduction approach. The research demonstrates the photocatalytic behaviour of the Co-Ni alloy-enhanced SiO2@TiO2 (ST-Co, Ni) hybrid nanocatalyst, focusing on its crystalline structures, morphological shapes, chemical conditions, and optical properties, utilizing techniques such as X-ray diffraction, field emission scanning electron microscopy, UV-visible diffuse reflectance spectroscopy, photoluminescence spectroscopy, transmission electron microscope, and electrochemical analysis. The catalyst was evaluated for its effectiveness in degrading tetracycline, an overused antibiotic that persists in aquatic environments and is known for …

Graphitic Carbon Nitride Loaded Bi4o5i2 For Elevated Photocatalytic Tetracycline Degradation, Subhasish Mishra, Barsha Marandi, Kali Sanjay, Rashmi Acharya

Journal of Metals, Materials and Minerals

As a robust photocatalyst, Bi4O5I2 have has attracted significant scientific interest owing to its narrow bandgap energy, escalated electronic properties and high stability. Nonetheless, the unfavourable band structure and higher recombination of excitons have restricted its diversified photocatalytic applications. In this context, binary heterojunction construction using Bi4O5I2 could be considered an effective strategy for spatial charge carrier separation across the hetero-interface, leading to an enhanced activity. In this study, we have prepared Bi4O5I2/g-C3N4 Z-scheme hetero-structures via a wet impregnation strategy that preserves the spherical structure of Bi4O5I2. The phase purity, chemical bonding, morphology and microstructure of the composite were confirmed …

Antibacterial, Self-Adhesive Guar Gum/Polyvinyl Alcohol/Tannic Acid Conductive Hydrogels For Flexible Strain Sensors, Noppanan Putdon, Somnuk Theerakulpistut, Rawit Jittham, Pornnapa Kasemsiri

Journal of Metals, Materials and Minerals

In this research, a multifunctional strain sensor with antibacterial properties and self-adhesion capabilities was developed using guar gum (GG), polyvinyl alcohol (PVA), and tannic acid (TA). The incorporation of TA into GG-PVA hydrogel-based strain sensors was investigated to evaluate its effects on mechanical and electrical properties, self-adhesion, and antibacterial activities. The anti-bacterial activities against Escherichia coli (E. coli) and Staphylococcus aureus (S. aureus) were enhanced with the increasing content of TA. The adhesive strength was observed in the range of 1.20 ± 0.10 kPa to 5.05 ± 0.23 kPa, and the values tended to increase as TA content increased. The …