Engineering Commons^™

Swarm Electrification: A Comprehensive Literature Review, Stephen Sheridan, Keith Sunderland, Jane Courtney

Articles

In the global North, the need to decarbonize power generation is well documented and the challenges faced are endemic to the design of the electrical grids. With networks relying on centralized generation, it can be difficult to replace fossil-fuel power plants with renewable energy sources as generation may be intermittent causing grid instability when there is no ‘spinning reserve’ [1]. In parts of the global south, however, many under-electrified nations have high levels of solar irradiance. This, combined with falling prices for solar panels, is allowing for alternative paths to electrification from costly grid extensions and has resulted in grids …

Adaptive Fuzzy Supplementary Controller For Ssr Damping In A Series-Compensated Dfig-Based Wind Farm, Mohamed Abdeen, Sayed Hosny Ahmed El-Banna, Sara Elgohary, Hend Mostafa, Nora Ghaly, Nourhan Adel, Zeinab Elkhwas, Mohamed Alahmady, Hossam Zawbaa, Salah Kamel

Articles

Although using a series compensation technique in a long transmission line effectively increases the transmittable power; it may cause a sub-synchronous resonance (SSR) phenomenon. Gate-controlled series capacitor (GCSC) is an effective method for SSR damping by controlling the turn-off angle. In the previous studies, a constant supplementary damping controller (SDC) was used for controlling the turn-off angle, which can mitigate the SSR phenomenon. However, these methods can not capture the maximum transmittable power at different operating points. In this paper, a fuzzy logic controller (FLC) is proposed to compute the gain of SDC based on the wind speed and the …

An Adaptive Vector Control Method For Inverter-Based Stand-Alone Microgrids Considering Voltage Reduction And Load Shedding Schemes, Sumit Kumar Jha, Deepak Kumar, Prabhat Ranjan Tripathi, Bhargav Appasani, Hossam Zawbaa, Salah Kamel

Articles

The droop mechanism is widely utilized in a stand-alone microgrid (MG) to regulate power-sharing among distributed generators (DG). However, over the years, the droop phenomena are continually modified to lessen the deviation in voltage and frequency parameters caused due to classical droop. This study suggests computing the droop coefficient for voltage–current (V–I) droop to take into account for proportional power distribution among DGs. In grid utility networks, the conservation voltage reduction (CVR) strategy is widely used to curtail the use of energy. Hence, this paper investigates the CVR's performance for stand-alone MG by performing the adaptive vector control scheme in …

H2020 Auto-Dan Project: Enhance The Participation Of The Community To Demand Response By Providing The State-Of-The-Art Technological And Policy Solution, Rene Peeren, Dharmesh Dabhi, John Dalton

Conference papers

The growing demand for electricity in Europe has increased the need for a more flexible and sustainable power system. In recent years, Demand Response (DR) has emerged as a promising solution to meet this need, by providing an opportunity for residential and smaller commercial consumers to actively participate in the electricity market. This research paper investigates the potential for DR among the residential community and small commercial electricity consumers in Europe and identifies the technological barriers and drivers that impact consumer engagement with DR programs in Europe. The different DR opportunities are identified and validated at the six different demo …

Quantum Classifiers For Video Quality Delivery, Tautvydas Lisas, Ruairí De Fréin

Conference papers

Classical classifiers such as the Support Vector Classifier (SVC) struggle to accurately classify video Quality of Delivery (QoD) time-series due to the challenge in constructing suitable decision boundaries using small amounts of training data. We develop a technique that takes advantage of a quantum-classical hybrid infrastructure called Quantum-Enhanced Codecs (QEC). We evaluate a (1) purely classical, (2) hybrid kernel, and (3) purely quantum classifier for video QoD congestion classification, where congestion is either low, medium or high, using QoD measurements from a real networking test-bed. Findings show that the SVC performs the classification task 4% better in the low congestion …

Optimising Electric Vehicle Charging Infrastructure In Dublin Using Geecharge, Alexander Mutua Mutiso, Ruairí De Fréin, Ali Malik, Eliel Kibanza, Marco Sahbane, Maxime Pantel

Conference papers

Range anxiety poses a hurdle to the adoption of Electric Vehicles (EVs), as drivers worry about running out of charge without timely access to a Charging Point (CP). We present novel methods for optimising the distribution of CPs, namely, EV portacharge and GEECharge. These solutions distribute CPs in Dublin, in this paper, by considering the population density and Points Of Interest (POIs) or road traffic. The object of this paper is to (1) develop and evaluate methods to distribute CPs in Dublin city; (2) optimise CP allocation; (3) visualise paths in the graph network to show the most used roads …

Architecting Future Multi-Modal Networks Coexistence, Generalization & Testbeds, Maqsood Ahamed Abdul Careem

Legacy Theses & Dissertations (2009 - 2024)

Next Generation (xG) wireless networks are poised to revolutionize the way people, devices, data and processes sense, communicate, interact, and collectively enable a wide range of emerging applications, ranging from smart cities, connected healthcare, and advanced vehicular communication to extended reality. To facilitate this seamless interoperability, these networks need to evolve to accommodate and integrate multiple modalities in communication/ sensing technologies and spectrum, heterogeneous networks, trends in signal-processing (statistical, AI-driven, and distributed systems), centralized and distributed architectures, and device/ network hardware resources. However, to cater to the high-target metrics and wide-range of applications, these multi-modal networks must efficiently address multi-faceted …

Optimal Battery Sizing For An Industrial Factory: A Hybrid Approach Using Particle Swarm Optimization And Load Estimation, Muhammad Hammad Hassan

Chulalongkorn University Theses and Dissertations (Chula ETD)

Solar photovoltaic (PV) systems are crucial in addressing global energy demands with clean and renewable electricity. However, the intermittent nature of solar energy requires integrating batteries to ensure a reliable power supply. This study focuses on optimizing battery size for solar PV systems to balance energy storage during high irradiance periods and discharge during low sunlight, thereby enhancing system efficiency and cost-effectiveness. Accurate load forecasting and load estimation, essential for effective energy storage management, is achieved using long short-term memory (LSTM) networks, which excel in handling time series data. Particle Swarm Optimization (PSO) is then employed to determine the optimal …

Single Image Super Resolution Using Deep Attention Network, Jagrati Talreja

Chulalongkorn University Theses and Dissertations (Chula ETD)

This thesis introduces two innovative frameworks for Single Image Super Resolution (SISR) that enhances image quality while optimizing computational efficiency. The motivation for this research is driven by the need to overcome the limitations of current SISR techniques like capturing long-range dependencies, enhancing multi-scale feature learning, mitigating over-smoothing, and managing computational demands. The choice to incorporate attention mechanisms in both frameworks is motivated by their proven ability to allow the model to focus on the most relevant parts of the image, thereby improving the reconstruction of high-resolution details from low-resolution inputs. By integrating attention mechanisms with inception blocks, the proposed …

A Review Of Piezoelectric Footwear Energy Harvesters: Principles, Methods, And Applications, Bingqi Zhao, Feng Qian, Alexander Hatfield, Lei Zuo, Tian-Bing Xu

Mechanical & Aerospace Engineering Faculty Publications

Over the last couple of decades, numerous piezoelectric footwear energy harvesters (PFEHs) have been reported in the literature. This paper reviews the principles, methods, and applications of PFEH technologies. First, the popular piezoelectric materials used and their properties for PEEHs are summarized. Then, the force interaction with the ground and dynamic energy distribution on the footprint as well as accelerations are analyzed and summarized to provide the baseline, constraints, potential, and limitations for PFEH design. Furthermore, the energy flow from human walking to the usable energy by the PFEHs and the methods to improve the energy conversion efficiency are presented. …

Unmanned Aircraft Systems For Precision Meteorology: An Analysis Of Gnss Position Measurement Error And Embedded Sensor Development, Karla S. Ladino

Theses and Dissertations--Biosystems and Agricultural Engineering

The overarching objective of this research was to enhance our comprehension of the three-dimensional precision of meteorological measurements obtained using small unmanned aircraft systems (UAS). Two complimentary experiments were conducted to achieve this objective.

The first experiment entailed the development and implementation of a system to determine the global navigation satellite system (GNSS) position accuracy on a UAS platform. This system was utilized to assess the static and dynamic accuracy of L1 and L1/L2 GNSS receivers in real-time kinematic (RTK) and non-RTK fix modes. Adjusted two-sample t-tests revealed significant differences in horizontal and vertical error between RTK and non-RTK receivers …

Running Shoe Pedometer, Benjamin Kasper

Williams Honors College, Honors Research Projects

Running shoe pedometer aims to solve the issue of worn out running shoes. It can be difficult to know just how many miles you have run in your shoes and when a new pair is needed. Running in old shoes and worn out shoes is heavily linked to injury. My proposed project is a device that is powered by the compressive forces on the shoes soles that counts the number of steps the wearer takes using a microcontroller. Then, when the shoe reaches milestone that indicate it has been used 75% 90% and 100% of its expected life, it will …

Comprehensive Fault Diagnostics And Performance Forecasting Of Wind Turbines Through Condition Monitoring Solutions, Shuo Zhang

Doctoral

The operation and maintenance (O&M) issues of wind turbines (WTs) are challenging because unplanned maintenance, caused by sudden component failures, can bring about durable downtimes and significant revenue losses. It is important to carry out effective fault diagnostics and prognostics schemes under the rapid development of wind power generation. Hence, Condition Monitoring (CM) solutions focus on measurements and detections of high-risk WT components, which could result in high failure rates and long downtimes. Machine Learning (ML) models have been commonly applied in CM to allocate imminent indications of failure or degradation for curtailing the O&M costs of WTs. By way …

High Energy Blue Light Induces Oxidative Stress And Retinal Cell Apoptosis, Jessica Malinsky

Capstone Showcase

Blue light (BL) is a high energy, short wavelength spanning 400 to 500 nm. Found in technological and environmental forms, BL has been shown to induce photochemical damage of the retina by reactive oxygen species (ROS) production. Excess ROS leads to oxidative stress, which disrupts retinal mitochondrial structure and function. As mitochondria amply occupy photoreceptors, they also contribute to oxidative stress due to their selectively significant absorption of BL at 400 to 500 nm. ROS generation that induces oxidative stress subsequently promotes retinal mitochondrial apoptosis. BL filtering and preventative mechanisms have been suggested to improve or repair BL-induced retinal damage, …

Pneumatic Latched Demultiplexer Circuit For Controlling Multi-Actuator Soft Robots, Arsh Noor Amin

Master’s Theses

This thesis presents a novel method for controlling multi-actuator soft robots using pneumatic latched demultiplexer circuits implemented with monolithic membrane valves. The pneumatic circuits are designed to address the problems of heavy dependence on hard electrical components and lack of feasible multi-actuator soft robotic systems that limit the potential applications of soft robotics. The proposed pneumatic demultiplexers reduce the number of solenoid valves and electrical components required to drive soft robotic systems, making soft robot control mechanisms more compliant, scalable, and versatile. The thesis demonstrates the design, fabrication, and testing of 4-bit and n-bit pneumatic demultiplexer circuits that can control …

Exploration Of Robotics Need In The Medical Field And Robotic Arm Operation Via Glove Control, Aditi Vijayvergia

Master’s Theses

This thesis project is an exercise in getting hands-on experience in redesigning and modifying a robotic system. It also involves understanding the current need for robotic applications in hospital settings. To achieve the above, a thorough literature review of the current state of robotics in a hospital setting was conducted. Moreover, a number of interviews with medical care professionals were completed. Three main themes were obtained from the literature review and five main themes were obtained from the interviews which will be presented in this thesis report. The next phase of the project involved redesigning a system that is composed …

Botsitter, Maria Hatzis, Gregory Blondheim Jr., Marian Bonto, Brett Jacobsen

Williams Honors College, Honors Research Projects

As society progresses into an era where both parents work, whether it is online or in person, children in the home may be put in dangerous situations if they are not given the attention they need. The BotSitter is an automated system that follows the child around and makes an audio alarm to alert both the child and the nearby guardian. Using RSSI trilateration, predetermined danger areas, and embedded controls, the BotSitter will be able to follow the child. The device can manage to keep track of the child for the guardian while being almost completely automated outside of setup.

Whiteboard Drawing Device, Stefan Ilic, Andrew Adams, Vaughn Richards, James Medved

Williams Honors College, Honors Research Projects

Whiteboards have become a staple in many classrooms, especially in the context of STEM courses. However, when it comes to teaching complex topics, it can be difficult or impractical to provide accurate drawings and visualizations by hand, and in extreme cases may lead to misinterpretation of a particular topic. To fix this issue, the Whiteboard Drawing Device allows users to draw preset shapes to a whiteboard automatically, both quickly and accurately. Using either a smartphone application or a set of onboard controls, the device allows users to automatically draw straight lines, rectangles, triangles, sinusoidal waves, and circles on the whiteboard. …

Wireless Kick Pedal, Jacob Wise, Ryan Kinyo, Bradley Toth, Ian Zanath

Williams Honors College, Honors Research Projects

The goal of the project is to build a wireless kick pedal that allows accessibility to drummers that have leg or foot disabilities and add versatility to multi-instrumentalists looking to add percussion while playing another instrument. The proposed pedal is designed in two main parts, a wearable band that tracks the player’s movement, and a hammer mechanism that receives actuation commands from the wearable band to move the hammer and deliver a drumbeat. The band is designed to be worn on several parts of the body, including the ankle, knee, thigh, or even the arm depending on the user’s situation. …

Wireless Environmental Weather Monitor, Joel Christie-Millett, Nathan Schroeder, Sylvester Wilson, Matthew Szijarto

Williams Honors College, Honors Research Projects

The goal of this senior design/honors project is to create a device that monitors environmental conditions in order to detect a wildfire. This device should notify a user of the status of the environment. The device should also last for 6 months without any human interaction. My role on the team is to design the power supply system that maximizes efficiency and uses renewable energy.

Development And Analysis Of A Game Play In Chulalongkorn University Central Library Metaverse, Aisha Munir

Chulalongkorn University Theses and Dissertations (Chula ETD)

Metaverse is the next generation of the internet that allows people to interact with digital content in a more immersive and interactive way. This paradigm shift extends to the realm of education, where the concept of a smart campus is reshaping traditional educational systems. This research focuses on the integration of the metaverse in education, with a specific emphasis on smart libraries. Recognizing libraries as integral components of educational systems, this study proposes a metaverse platform for Chulalongkorn University's central library. The proposed platform enables users to explore the virtual library remotely and simulate resource classification and physical service in …

การพัฒนาพิพิธภัณฑ์จุฬาลงกรณ์มหาวิทยาลัยเสมือน สำหรับการเยี่ยมชมพร้อมกันหลายราย, ญาดา อังสนานนท์

Chulalongkorn University Theses and Dissertations (Chula ETD)

วิทยานิพนธ์ฉบับนี้ได้สร้างพิพิธภัณฑ์จุฬาลงกรณ์มหาวิทยาลัยในโลกเสมือนจริงสำหรับการใช้งานบนอุปกรณ์คอมพิวเตอร์ ครอบคลุมตัวอาคารทั้งหลัง และสร้างนิทรรศการในโลกเสมือนที่จัดแสดงเรื่องราวที่เกี่ยวข้องกับประวัติศาสตร์ของจุฬาลงกรณ์มหาวิทยาลัยให้ใกล้เคียงกับนิทรรศการจริงที่จัดแสดงอยู่บนชั้น 4 ของอาคาร ในระบบที่สร้างขึ้นนี้สามารถรองรับผู้ใช้งานได้พร้อมกันได้หลายราย โดยผู้ใช้แต่ละรายสามารถสร้างสรรค์ตัวละครใหม่ ๆ ที่หลากหลายเพื่อแสดงความเป็นตัวตนบนโลกเสมือนได้อย่างอิสระและมีเอกลักษณ์ที่เป็นของตนเอง ผู้เข้าเยี่ยมชมสามารถปรับเปลี่ยนมุมมองของกล้องให้มีระยะใกล้ไกลได้ช่วยให้อ่านเนื้อหาและข้อความต่าง ๆ ได้ และสามารถเคลื่อนไหวได้อย่างอิสระ ไม่ว่าจะเป็นการเดิน วิ่ง กระโดด หรือแม้กระทั่งการเทเลพอร์ตไปยังจุดต่าง ๆ ภายในมีการนำเสนอความรู้ทางประวัติศาสตร์ในรูปแบบของ เสียงบรรยาย รูปภาพ วีดิทัศน์ และข้อความ ทำให้ผู้เยี่ยมชมสามารถเรียนรู้ประวัติศาสตร์และเหตุการณ์สำคัญของจุฬาลงกรณ์มหาวิทยาลัยร่วมกันกับผู้อื่นได้ตลอดทุกช่วงเวลาโดยไม่จำเป็นต้องอยู่ในสถานที่เดียวกัน ผลการทดลองในเบื้องต้นกับผู้ใช้งานที่ไม่คุ้นเคยกับเทคโนโลยีโลกเสมือนพบว่าผู้ใช้งานรู้สึกตื่นเต้นและพึงพอใจกับประสบการณ์ใหม่ที่ได้รับจากการท่องไปในโลกพิพิธภัณฑ์เสมือนแห่งนี้ ที่ได้รับการพัฒนาให้มีความสมจริงและเข้าถึงได้ง่าย จึงนับเป็นจุดเริ่มต้นของการนำเทคโนโลยีโลกเสมือนมาประยุกต์ใช้ให้เกิดเป็นมิติใหม่ของการเผยแพร่เรื่องราวทางประวัติศาสตร์ของจุฬาลงกรณ์มหาวิทยาลัยได้อย่างกว้างขวาง

Pattern And Polarization Diversity Multisector Annular Antenna For Iot Applications, Abel Zandamela, Nicola Marchetti, Max Ammann, Adam Narbudowicz

Articles

This work proposes a small pattern and polarization diversity multisector annular antenna with electrical size and profile of ka = 1.2 and 0.018λ, respectively. The antenna is planar and comprises annular sectors that are fed using different ports to enable digital beamforming techniques, with efficiency and gain of up to 78% and 4.62 dBi, respectively. The cavity model analysis is used to describe the design concept and the antenna diversity. The proposed method can produce different polarization states (e.g., linearly and circularly polarized patterns) and pattern diversity characteristics covering the elevation plane. Owing to its small electrical size, low-profile and …

Teaching Data Acquisition Through The Arduino-Driven Home Weather Station Project, Sheryl Dutton, Kurt Galderisi, Murat Kuzlu, Otilia Popescu, Vukica Jovanovic

Engineering Technology Faculty Publications

The main objective of this paper is to present one possible way to engage undergraduate students in designing a system that uses the Internet of Things (IoT) strategy for data acquisition and management. The MATLAB home weather station project presented here was developed by a team of students for the senior design course in the Electrical Engineering Technology undergraduate program at Old Dominion University (ODU). The main purpose of this project was for undergraduate students to learn how to create a localized, compact, and precise weather station. Utilizing various sensors, both homemade and sourced online, this weather station is capable …

Battery Energy Storage Systems Applications And Deployment In Dense Urban Areas, Mohamed K. Kamaludeen

Dissertations and Theses

Energy Storage has emerged as an important focus of the U.S. federal government, which has established the goal of developing global leadership in energy storage and has a near-term focus on strengthening the supply chain, manufacturing, and funding streams available to achieve the overarching objectives. At the state level, similar efforts are underway in which policy objectives have set aggressive targets around energy storage deployment. New York State, through its landmark climate act “CLCPA” and subsequent Energy Storage roadmap 2.0, has set one of the most aggressive goals in the Country targeting 6,000MW of energy storage by 2030. While much …

Blockchain Framework For Secured On-Demand Patient Health Records Sharing, Meryem Abouali

Dissertations and Theses

As the healthcare industry continues to digitize and share patient data for a better understanding of patient health history, cybersecurity must remain a top priority. However, patient health record (PHR) data is extremely sensitive and faces significant challenges due to its distributed nature across various healthcare facilities and providers, which creates a lack of interoperability among healthcare systems. Most patient health record systems adopt a centralized management structure and deploy PHRs to the cloud, which raises privacy concerns when sharing patient information over a network. Thus, there is a need for a framework that considers patient privacy and data security …

Lidar Remote Sensing Of Aerosol And Ozone Profiles And Application To Air Quality Studies In New York City Area, Dingdong Li

Dissertations and Theses

Ozone (O₃) and PM2.5 (Particulate Matter with a diameter less than 2.5 μm) are the main pollutants in New York City (NYC) due to high levels of anthropogenic emissions, complex urban meteorology, and regional transport. However, vertical distribution observations are still lacking. This thesis utilizes lidar remote sensing techniques to retrieve the vertical distribution of O₃ and aerosols and study air pollution episodes in the NYC metropolitan area.

The thesis includes three parts. The first part analyzes continuous ceilometer observations of aerosols and atmospheric mixed-layer height (ML). We investigate the vertical, diurnal, and seasonal characteristics of the …

Enhancing Traffic Safety In Unpredicted Environments With Integration Of Adas Features With Sensor Fusion In Intelligent Electric Vehicle Platform With Implementation Of Environmental Mapping Technology, David S. Obando Ortegon

College of Graduate Studies: Theses & Dissertations

A major objective on society is to reduce the number of accidents and fatalities on the road for drivers, and pedestrians. Therefore, the automotive engineering field is working on this problem through the development and integration of safety technologies such as advanced driving assistance systems. For this reason, this work was intended to develop and evaluate the performance of different ADAS features and IV technologies under unexpected scenarios. This by the development of safety algorithms applied to the intelligent electric vehicle designed and built in this work, through the use of ADAS sensors based on sensor fusion. Evaluation of AEB, …

Constructing Series, Parallel And Mixed Circuits With Lightbulbs And Analyzing Their Behaviors, Adaeze A. Eze

A with Honors Projects

This honors project was an experiment "to find out if the principles of a series, parallel and a mixed circuit still apply under the given condition (varying bulb resistance)."

An Investigation Of 3.5 Μm Emission In Er3+-Doped Fluorozirconate Glasses Under 638 Nm Laser Excitation, Haiyan Zhao, Ke Tian, Xin Wang, Dejun Liu, Shunbin Wang, Gerald Farrell, Pengfei Wang

Articles

Intense 3.5 μm mid-infrared emission has been achieved in Er3+-doped ZBYA glasses, which is ascribed to the Er3+: 4F9/2→4I9/2 transition. Based on the absorption spectrum of Er3+ ions, a 638 nm laser was utilized to directly pump the upper level (Er3+: 4F9/2) to achieve 3.5 μm emission with enhanced quantum efficiency. Spectroscopic parameters were predicted by Judd-Ofelt theory. The maximum emission cross-section of the Er3+-doped ZBYA glass was estimated to be 5.5×10-22 cm2 at 3496 nm. Additionally, the fluorescence spectra and energy level lifetimes of ZBYA glass samples with different Er3+ ions doping concentrations were also measured. The theoretical and …