Engineering Commons^™

Design Of Low Phase Drift Cmos Frequency Synthesisers, Cyril Patrick Hervé Florent Lahuec

Theses

This thesis presents a methodology for the development of high performance video clock synthesisers that have high (2000) input to output clock multiplication ratios. The synthesisers are required to be compatible with standard CMOS technologies and they must exhibit very low drift between their input and output clocks.

The methodology used borrows techniques established for RF synthesisers in the GHz range. In the RF domain there are significant constraints on spectral spread and because of this there has been significant interest in phase noise generated by intrinsic device noise. Simple and accurate models were developed that help understand the up …

Servo Response And Modelling Issues In Generalised Predictive Control, Ben Griffin

Theses

One of the more popular control strategies, of late, is the Generalised Predictive Controller (GPC). It has received widespread dissemination in academia and numerous successful applications in industry testify to its usefulness. Its popularity partly stems from its superiority to its predecessors, e.g. the generalised minimum variance and pole-placement controllers, but also from the GPC ‘tuning knobs’, which have simple time-domain interpretations and extremely robust default settings. However, despite the widespread interest, there would appear to be some issues relating to the specification of the closed-loop serv^o response that have not been covered in any great detail in the GPC …

Extensible Data Storage And Presentation Technology For An Ophthalmology Electronic Patient Record, Markus H. Heinrichs

Theses

The Electronic Patient Record (EPR) is a central element of practice systems used in ophthalmology. It acts as a repository for multi-media patient care data as well as billing information, serving healthcare providers and ultimately their patients. The aim of this thesis is to create both a data structure and a flexible on-screen representation of an EPR for an ophthalmology practice, and to provide an XML-based experimental prototype as a “proof of concept” which could ultimately be used as an replacement for an existing DOS- based solution. The medical background and requirements for this system will be described. The state-of-the-art …

A 0.5 Μm Thick Polysilicon Schottky Diode With Rectification Ratio Of 10^6, Elena A. Guliants, Chunhai Ji, Young J. Song, Wayne A. Anderson

Electrical and Computer Engineering Faculty Publications

Polycrystalline Si films, 0.5-mm thick, were obtained as a result of metal-induced growth by sputtering from a Si target on 25 nm thick Ni prelayers at 525 °C. Silicon grew heteroepitaxially on the NiSi2 layer formed due to the reaction between the sputtered Si atoms and Ni. Schottky diodes were fabricated on the Si films by deposition of a Schottky metal on the front surface of the film while Ni disilicide provided an intimate ohmic contact at the back. A Pd/n-Si diode using an n-Si film annealed for 2 h at 700 °C in forming gas demonstrated a rectification ratio …

Improved Energy Model For Membrane Electroporation In Biological Cells Subjected To Electrical Pulses, R. P. Joshi, Q. Hu, K. H. Schoenbach, H. P. Hjalmarson

Bioelectrics Publications

A self-consistent model analysis of electroporation in biological cells has been carried out based on an improved energy model. The simple energy model used in the literature is somewhat incorrect and unphysical for a variety of reasons. Our model for the pore formation energy E(r) includes a dependence on pore population and density. It also allows for variable surface tension, incorporates the effects of finite conductivity on the electrostatic correction term, and is dynamic in nature. Self-consistent calculations, based on a coupled scheme involving the Smoluchowski equation and the improved energy model, are presented. It is shown that E(r) becomes …

Electrical Network-Based Time-Dependent Model Of Electrical Breakdown In Water, R. P. Joshi, J. Qian, K. H. Schoenbach

Bioelectrics Publications

A time-dependent, two-dimensional, percolative approach to model dielectric breakdown based on a network of parallel resistor–capacitor elements having random values, has been developed. The breakdown criteria rely on a threshold electric field and on energy dissipation exceeding the heat of vaporization. By carrying out this time-dependent analysis, the development and propagation of streamers and prebreakdown dynamical evolution have been obtained directly. These model simulations also provide the streamer shape, characteristics such as streamer velocity, the prebreakdown delay time, time-dependent current, and relationship between breakdown times, and applied electric fields for a given geometry. The results agree well with experimental data …

Precise Chemical Analysis Development For Si And Gaas Surfaces, T. A. Briantseva, Z. M. Lebedeva, D. V. Lioubtchenko, M. Nolan, T. S. Perova, R. A. Moore, Kevin Berwick

Articles

Precise chemical analysis (PCA) was developed to allow the study of non-interconnected atoms on crystalline semiconductor surfaces, such as those produced during rapid thermal processing (RTP) of silicon and electron beam lithography on gallium arsenide (GaAs). The PCA method is based on selectively dissolving the different components present on the semiconductor surface using preferential etchant solutions. After etching, the etchant solution, containing the etched component, is analyzed by a photometric technique. In this paper, we present photometric measurements of the amount of “free” (non-interconnected) atoms that remain on semiconductor surfaces following electron beam and RTP processing. In this context, “free” …

121.6 Nm Radiation Source For Advanced Lithography, Jianxun Yan, Ashraf El-Dakrouri, Mounir Laroussi, Mool C. Gupta

Electrical & Computer Engineering Faculty Publications

A vacuum ultraviolet (VUV) light source based on a high-pressure cylindrical dielectric barrier discharge (DBD) has been developed. Intense and spectrally clean Lyman-α line at 121.6 nm was obtained by operating a DBD discharge in neon with a small admixture of hydrogen. The spectrum, optical power, stability, and efficiency of the source were measured. The influence of the gas mixture and total gas pressure on the VUV intensity has been investigated. Maximum optical power of 3.2 W and spectral width 0.03 nm was achieved. Power stability of 2% for 100 h of operation has also been obtained. The newly developed …

Modeling Of Electrofusion Coils For Performance Optimization, Steve Farmer, Robert A. Sims

Journal of the Arkansas Academy of Science

Modeling physical parameters provides a virtual design environment allowing the confirmation and optimization of electrofusion characteristics. Finite element incorporate physical parameters and their interactions along common boundaries defined within a model geometry. The electrofusion of polymeric piping is a widely accepted means of assembling piping systems with zero-leakage integrity. The key parameters in the fusion process are the coil resistance, the current passing through the coil and the time the current is applied. Modeling the coil and applying current to the model is accomplished using the MATLABpartial differential equations (PDE) toolbox. This paper presents the method of modeling and the …

Mechanism For Membrane Electroporation Irreversibility Under High-Intensity, Ultrashort Electrical Pulse Conditions, R. P. Joshi, K. H. Schoenbach

Bioelectrics Publications

An improved electroporation model is used to address membrane irreversibility under ultrashort electric pulse conditions. It is shown that membranes can survive a strong electric pulse and recover provided the pore distribution has a relatively large spread. If, however, the population consists predominantly of larger radii pores, then irreversibility can result. Physically, such a distribution could arise if pores at adjacent sites coalesce. The requirement of close proximity among the pore sites is more easily satisfied in smaller organelles than in outer cell membranes. Model predictions are in keeping with recent observations of cell damage to intracellular organelles (e.g., mitochondria), …

Self-Assembly Of Spatially Separated Silicon Structures By Si Heteroepitaxy On Ni Disilicide, Elena A. Guliants, Chunhai Ji, Wayne A. Anderson

Electrical and Computer Engineering Faculty Publications

A nonlithographic approach to produce self-assembled spatially separated Si structures for nanoelectronic applications was developed, employing the metal-induced silicon growth. Densely packed Si whiskers, 500–800 nm thick and up to 2500 nm long, were obtained by magnetron sputtering of Si on a 25 nm thick Ni prelayer at 575 °C. The nucleation of the NiSi2 compound at the Ni–Si interface followed by the Si heteroepitaxy on the lattice-matched NiSi2 is suggested to be the driving force for the whisker formation.

Robust Generalised Predictive Control - An Optimal Design For Uncertain Systems, Thomas O'Mahony

Theses

One of the more popular model predictive control approaches, of late, is the generalised predictive controller (GPC). It has received widespread dissemination in academia and numerous successful applications in industry testify to its usefulness. Its popularity partly stems from its superiority over its predecessors, its simplicity and its control acumen. However, since GPC is based on a mathematical model of the process, significant deterioration in performance or even closed-loop instability may arise due to the inevitable discrepancies that arise between the model and the true system. To ensure that the loop stability is not compromised and an adequate level of …

Symmetrically Coated Pellicle Beam Splitters For Dual Quarter-Wave Retardation In Reflection And Transmission, Rasheed M.A. Azzam, Fadi A. Mahmoud

Electrical Engineering Faculty Publications

A trilayer pellicle that consists of a high-index center layer that is symmetrically coated on both sides by a low-index film can be designed to produce differential reflection and transmission phase shifts of ∓90° at oblique incidence and equal throughput for the p and the s polarizations. Such a device splits a beam of incident linearly polarized light into two orthogonal circularly polarized components that travel in well-separated angular directions. Examples of infrared dual quarter-wave retarders that use a symmetrically coated Ge pellicle at 77° angle of incidence are presented. A 50–50% splitter requires a symmetric pellicle with at least …

Angular Range For Reflection Of P-Polarized Light At The Surface Of An Absorbing Medium With Reflectance Below That At Normal Incidence, R. M.A. Azzam, Ericson E. Ugbo

Electrical Engineering Faculty Publications

The range of incidence angle, 0 < φ < φ_e, over which p-polarized light is reflected at interfaces between transparent and absorbing media with reflectance below that at normal incidence is determined. Contours of constant φ_e in the complex plane of the relative dielectric constant ε are presented. A method for determining the real and imaginary parts of the complex refractive index, ε^1/2 = n + jk, which is based on measuring φ_e and the pseudo-Brewster angle φ_pB, is viable in the domain of fractional optical constants, n, k < 1.

Deconvolution Of Chirp Sidescan Sonar Data, Juliette W. Ioup, Maria T. Kalcic, Dale Bibee, Edit J. Kaminsky, George E. Ioup

Electrical Engineering Faculty Publications

No abstract provided.

Induced Strain Mechanism Of Current Collapse In Algan/Gan Heterostructure Field-Effect Transistors, Grigory Simin, A. Koudymov, A. Tarakji, X. Hu, J. Yang, M. Asif Khan, M. S. Shur, R. Gaska

Faculty Publications

Gated transmission line model pattern measurements of the transient current–voltage characteristics of AlGaN/GaN heterostructurefield-effect transistors(HFETs) and metal–oxide–semiconductor HFETs were made to develop a phenomenological model for current collapse. Our measurements show that, under pulsed gate bias, the current collapse results from increased source–gate and gate–drain resistances but not from the channel resistance under the gate. We propose a model linking this increase in series resistances (and, therefore, the current collapse) to a decrease in piezoelectriccharge resulting from the gate bias-induced nonuniform strain in the AlGaN barrier layer.

Arq Protocol For Joint Source And Channel Coding And Its Applications, Bin He

Dissertations

Shannon's separation theorem states that for transmission over noisy channels, approaching channel capacity is possible with the separation of source and channel coding. Practically, the situation is different. Infinite size blocks are needed to achieve this theoretical limit. Also, time-varying channels require a different approach. This leads to many approaches for source and channel coding. This dissertation will address a joint source and channel coding that suits Automatic Repeat Request (ARQ) application and applies it to packet switching networks. Following aspects of the proposed joint source and channel coding approach will be presented:

1. The design of the proposed joint source …

Saturation Routing For Asynchronous Transfer Mode (Atm) Networks, Jose Luis Ucles

Dissertations

The main objective of this thesis is to show that saturation routing, often in the past considered inefficient, can in fact be a viable approach to use in many important applications and services over an Asynchronous Transfer Mode (ATM) network. For other applications and services, a hybrid approach (one that partially uses saturation routing) is presented. First, the minimum effects of saturation routing are demonstrated by showing that the ratio, defined as f, of routing overhead cells over information cells is small even for large networks. Second, modeling and simulation and M/D/l queuing analysis techniques are used to show that …

Feedback Correction Of Angular Error In Grating Readout, Monish Ranjan Chatterjee, Sundaram Ramachandran

Electrical and Computer Engineering Faculty Publications

Angular and wavelength READ beam errors in holographic interconnection systems are often a recurrent problem. Several strategies have been proposed to minimize or eliminate such READOUT misalignments.

Some years ago, Chatterjee and co-workers proposed a method involving READ beam wavelength tuning to correct output angular errors. In this paper, we investigate the possibility of using an acousto-optic (A-O) Bragg cell with optoelectronic feedback to dynamically correct the scattered beam for deviations in the incidence direction of the READ beam of a hologram. The concept here is based on an acoustic frequency feedback strategy used recently by Balakshy and Kazaryan for …

The Effect Of Multiple Pulses On Bacteria, Ramy El-Sayed Aly

Electrical & Computer Engineering Theses & Dissertations

Pulsed electric fields are widely used for bacterial decontamination of water and liquid food [I]. Depending on pulse amplitude and duration, a certain percentage of the bacteria suffer irreversible damage and, consequently, cell death. We have explored the effect of microsecond pulses of 13 kV/cm and 15 kV/cm electric field amplitude on the viability of Escherlchia coli. The pulse duration was varied from 4 μs to 32 μs, and the pulse number of 4 μs pulses from one to eight, Finally, the effect of separation between pulses was studied. The pulses were generated by means of a generator where …

Pulsed Electron Heating Of Atmospheric Pressure Air Glow Discharges, Hisham Merhi

Electrical & Computer Engineering Theses & Dissertations

By applying electric field pulses of short duration (compared to the time constant for glow-to-arc transitions) to a weakly ionized gas, the electron energy distribution can be temporarily shifted to higher energies. This effect causes a nonlinear increase in the ionization rate and consequently a larger electron decay time. This effect has been demonstrated using single pulse operation.³ In order to generate plasma with semi-continuous electron density, repetitive operation is required. As a first step towards repetitive pulsed electric field operation, the temporal development of the voltage across the plasma for two subsequent pulses was measured. The dual pulse …

Low Frequency Noise In Gan Metal Semiconductor And Metal Oxide Semiconductor Field Effect Transistors, S. L. Rumyantsev, N. Pala, M. S. Shur, R. Gaska, M. E. Levinshtein, M. Asif Khan, Grigory Simin, X. Hu, J. Yang

Faculty Publications

The low frequency noise in GaNfield effect transistors has been studied as function of drain and gate biases. The noise dependence on the gate bias points out to the bulk origin of the low frequency noise. The Hooge parameter is found to be around 2×10⁻³ to 3×10⁻³.Temperature dependence of the noise reveals a weak contribution of generation–recombination noise at elevated temperatures.

Apparatus And Method For Two Stage Hybrid Space-Time Adaptive Processing In Radar And Communication Systems, Todd B. Hale, Michael C. Wicks, Raviraj S. Adve

AFIT Patents

A Two-Stage Hybrid algorithm offers significant improvement in the false alarm rate and detection performance of Space-Time Adaptive Processing in non-homogeneous environments for both radar and digital communications. The first stage analyzes data from a range cell of interest by direct data domain processing, suppressing discrete interferers within the range cell of interest. The second stage implements a purely statistical STAP algorithm, preferably an enhanced version of the Joint-Domain Localized ("JDL") statistical algorithm. For radar this second stage estimates the interference within the range cell of interest from the surrounding range cells. For a communications system, the second stage estimates …

Human Head-Neck Response To Impact Acceleration: Comparison Of Oblique To Combined Frontal And Lateral Response, Salvadore J. Guccione Jr., Edit J. Kaminsky

Electrical Engineering Faculty Publications

This paper relates human oblique head-neck kinematics to human frontal and lateral head-neck kinematics for three subjects of varying anthropometry. Head-neck kinematic response to indirect impact acceleration for an oblique test is compared to the superposition of the head/neck behavior of appropriate frontal and lateral tests for the same subject. The results have important implications in terms of the complexity required in the design and validation of omni-directional biofidelic crash test manikins and mathematical models of human head-neck response.

Turbo Space-Time Coded Modulation : Principle And Performance Analysis, Dongzhe Cui

Dissertations

A breakthrough in coding was achieved with the invention of turbo codes. Turbo codes approach Shannon capacity by displaying the properties of long random codes, yet allowing efficient decoding. Coding alone, however, cannot fully address the problem of multipath fading channel. Recent advances in information theory have revolutionized the traditional view of multipath channel as an impairment. New results show that high gains in capacity can be achieved through the use of multiple antennas at the transmitter and the receiver. To take advantage of these new results in information theory, it is necessary to devise methods that allow communication systems …

Scheduling Algorithms For High-Speed Switches, Jinhui Li

Dissertations

The virtual output queued (VOQ) switching architecture was adopted for high speed switch implementation owing to its scalability and high throughput. An ideal VOQ algorithm should provide Quality of Service (QoS) with low complexity. However, none of the existing algorithms can meet these requirements.

Several algorithms for VOQ switches are introduced in this dissertation in order to improve upon existing algorithms in terms of implementation or QoS features. Initially, the earliest due date first matching (EDDFM) algorithm, which is stable for both uniform and non-uniform traffic patterns, is proposed. EDDFM has lower probability of cell overdue than other existing maximum …

2d And 3d Surface Image Processing Algorithms And Their Applications, Jianlin Gao

Dissertations

This doctoral dissertation work aims to develop algorithms for 2D image segmentation application of solar filament disappearance detection, 3D mesh simplification, and 3D image warping in pre-surgery simulation. Filament area detection in solar images is an image segmentation problem. A thresholding and region growing combined method is proposed and applied in this application. Based on the filament area detection results, filament disappearances are reported in real time. The solar images in 1999 are processed with this proposed system and three statistical results of filaments are presented.

3D images can be obtained by passive and active range sensing. An image registration …

Channel Estimation And Signal Enhancement For Ds-Cdma Systems, Kun Wang

Dissertations

This dissertation focuses on topics of Bayesian-based multiuser detection, space-time (S-T) transceiver design, and S-T channel parameter estimation for direct-sequence code-division multiple-access (DS-CDMA) systems.

Using the Bayesian framework, various linear and simplified nonlinear multiuser detectors are proposed, and their performances are analyzed. The simplified non-linear Bayesian solutions can bridge the performance gap between sub-optimal linear multiuser detectors and the optimum multiuser detector.

To further improve the system capacity and performance, S-T transceiver design approaches with complexity constraint are investigated. Novel S-T receivers of low-complexity that jointly use the temporal code-signature and the spatial signature are proposed. Our solutions, which lead …

Modeling, Design And Scheduling Of Computer Integrated Manufacturing And Demanufacturing Systems, Ying Tang

Dissertations

This doctoral dissertation work aims to provide a discrete-event system-based methodology for design, implementation, and operation of flexible and agile manufacturing and demanufacturing systems. After a review of the current academic and industrial activities in these fields, a Virtual Production Lines (VPLs) design methodology is proposed to facilitate a Manufacturing Execution System integrated with a shop floor system. A case study on a back-end semiconductor line is performed to demonstrate that the proposed methodology is effective to increase system throughput and decrease tardiness. An adaptive algorithm is proposed to deal with the machine failure and maintenance. To minimize the environmental …

Joint Source Channel Coding For Progressive Image Transmission, Minyi Zhao

Dissertations

Recent wavelet-based image compression algorithms achieve best ever performances with fully embedded bit streams. However, those embedded bit streams are very sensitive to channel noise and protections from channel coding are necessary. Typical error correcting capability of channel codes varies according to different channel conditions. Thus, separate design leads to performance degradation relative to what could be achieved through joint design. In joint source-channel coding schemes, the choice of source coding parameters may vary over time and channel conditions. In this research, we proposed a general approach for the evaluation of such joint source-channel coding scheme. Instead of using the …