Engineering Commons^™

Rf Circuit Designs For Reliability And Process Variability Resilience, Ekavut Kritchanchai

Electronic Theses and Dissertations

Complementary metal oxide semiconductor (CMOS) radio frequency (RF) circuit design has been an ever-lasting research field. It has gained so much attention since RF circuits offer high mobility and wide-band efficiency, while CMOS technology provides the advantage of low cost and high integration capability. At the same time, CMOS device size continues to scale to the nanometer regime. Reliability issues with RF circuits have become more challenging than ever before. Reliability mechanisms, such as gate oxide breakdown, hot carrier injection, negative bias temperature instability, have been amplified as the device size shrinks. In addition, process variability becomes a new design …

Electron Beam Induced Deposition Of Highly Conductive Copper Nanowires From Bulk Liquids, Amjad M. Syam

Theses and Dissertations--Electrical and Computer Engineering

Electron-beam induced deposition (EBID) is a position-controlled technique that can directly fabricate nanometer-sized structures in functional materials. In the standard process, a gaseous precursor delivers the desired substance to the substrate for deposition. However, the material purity from these precursors is typically poor, which often negatively affects the functional properties of the deposit. Recently, bulk liquid precursors have been investigated as promising reactants for high purity deposition without the need for post-processing. In this work, EBID from bulk liquids is shown to yield highly conductive nanowire deposits. Aqueous solutions containing copper sulfate (CuSO₄) and sulfuric acid (H_{2 …}

Performance Evaluation Of Connectivity And Capacity Of Dynamic Spectrum Access Networks, Osama Al-Tameemi

Electronic Theses and Dissertations

Recent measurements on radio spectrum usage have revealed the abundance of under- utilized bands of spectrum that belong to licensed users. This necessitated the paradigm shift from static to dynamic spectrum access (DSA) where secondary networks utilize unused spectrum holes in the licensed bands without causing interference to the licensed user. However, wide scale deployment of these networks have been hindered due to lack of knowledge of expected performance in realistic environments and lack of cost-effective solutions for implementing spectrum database systems. In this dissertation, we address some of the fundamental challenges on how to improve the performance of DSA …

Electrosensitization Assists Cell Ablation By Nanosecond Pulsed Electric Field In 3d Cultures, Claudia Muratori, Andrei G. Pakhomov, Shu Xiao, Olga N. Pakhomova

Bioelectrics Publications

Previous studies reported a delayed increase of sensitivity to electroporation (termed "electrosensitization") in mammalian cells that had been subjected to electroporation. Electrosensitization facilitated membrane permeabilization and reduced survival in cell suspensions when the electric pulse treatments were split in fractions. The present study was aimed to visualize the effect of sensitization and establish its utility for cell ablation. We used KLN 205 squamous carcinoma cells embedded in an agarose gel and cell spheroids in Matrigel. A local ablation was created by a train of 200 to 600 of 300-ns pulses (50 Hz, 300-600 V) delivered by a two-needle probe with …

A Tool For Beamforming And Real-Time Link Budget Analysis In Aeronautical Communications Using Kinematics, M. Cenk Erturk, Yasin Aksan

Electrical Engineering Faculty Publications

Aeronautical Communication (AC) systems are likely to be a part of future tiered communication network structures. Therefore maintaining a robust AC link with a minimum power burden on the host platform has a critical importance. In this paper, we analyze the AC systems from a link budget analysis point of view and define the requirements for the parameters of link budget with an emphasize on antenna gains. First, we study the link budget analysis in an AC system. Then, we present a mathematical framework to provide an end-to-end link budget analysis utilizing the platform kinematics. Finally, we present the numerical …

Electrokinetic Phenomena In Pencil Lead-Based Microfluidics, Yashar Bashirzadeh, Venkat Maruthamuthu, Shizhi Qian

Mechanical & Aerospace Engineering Faculty Publications

Fabrication of microchannels and associated electrodes to generate electrokinetic phenomena often involves costly materials and considerable effort. In this study, we used graphite pencil-leads as low cost, disposable 3D electrodes to investigate various electrokinetic phenomena in straight cylindrical microchannels, which were themselves fabricated by using a graphite rod as the microchannel mold. Individual pencil-leads were employed as the micro-electrodes arranged along the side walls of the microchannel. Efficient electrokinetic phenomena provided by the 3D electrodes, including alternating current electroosmosis (ACEO), induced-charge electroosmosis (ICEO), and dielectrophoresis (DEP), were demonstrated by the introduced pencil-lead based microfluidic devices. The electrokinetic phenomena were characterized …

Using Photovoltaics To Power Electrochemical Chloride Extraction From Concrete, Sean Bond, Lynette O'Callaghan, Niall Holmes Dr., Brian Norton

Conference papers

Corrosion of embedded steel in reinforced concrete (RC) is a world-wide problem, that reduces structural performance and lifespan. Chloride attack may be a result of seawater, de-icing salts or contaminated admixtures, brought on by ingress of chlorides into the concrete. Electrochemical Chloride Extraction (ECE) is a non-destructive treatment for contaminated RC structures, that due to uncertainty of treatment times and applied current densities, is only 50% effective. It is often diesel powered has an environmental impact and often very costly due to the long treatment times. To improve the efficiency of ECE the influences of concrete resistance, cement type and …

Solid-State Transformers For Interfacing Solar Panels To The Power Grid: An Optimum Design Methodology Of A High Frequency Transformer For Dc-Dc Converter Applications, Kenny George

Inquiry: The University of Arkansas Undergraduate Research Journal

Nowadays the use of power electronic interfaces to integrate distributed generation with the power grid is becoming relevant due to the increased penetration of renewable energy sources like solar, and the continued interest to move to a smarter and more robust electric grid. Those interfaces, which also provide a voltage step-up or step-down function, are of particular interest because renewable energy sources do not always have voltages compatible with the connecting grid. Among them, the so-called “power electronic transformer” or “solid-state transformer” (SST) is the focus of significant research. Advantages such as bidirectional power flow, improved system control, reduced size, …

Supervision Of Community Based Microgrids: An Economic Model Predictive Control Approach, Francesco Tedesco, Lubna Mariam, Malabika Basu, Alessandro Casavola, Michael F. Conlon

Conference papers

Abstract— In this paper, an Economic Model Predictive Control (EMPC) approach has been presented to manage a Community-based microgrid (C-µGCC) at the pricing level. The main task is at satisfying the demand at prosumer sides and, at the same time, optimizing various µ-Grid contrasting objectives. Emphasis has been given to the operational constraints related to the components lifetime, whose satisfaction would be beneficial for the grid in that the maintenance and replacement costs would be reduced. A simulative analysis has been carried out on the basis of available measured data related to a location in Dublin, Ireland. Results show the …

Novel Two-Dimensional Devices For Future Applications, Pratik Agnihotri

Legacy Theses & Dissertations (2009 - 2024)

The scalability of field effect transistor has led to the monumental success of complementary metal-oxide-semiconductor (CMOS) technology. In the past, device scaling was not the major issue to a greater extent. Recently with current technology nodes, transistor characteristics show signs of reduced performance due to short channel effects and other issues related to device scaling. Device designers look for innovative ways to enhance the transistor performance while keeping up with device miniaturization. Successful inventions include the development of tri-gate technology, gate all around (GAA) field effect transistors, silicon-on-insulator substrate, and high-k dielectrics. These developments have enabled the device scaling that …

Development Of Iii-Sb Based Technologies For P-Channel Mosfet In Cmos Applications, Shailesh Kumar Madisetti

Legacy Theses & Dissertations (2009 - 2024)

The continuous scaling of silicon CMOS predicts the end of roadmap due to the difficulties such as that arise from electrostatic integrity, design complexities, and power dissipation. These fundamental and practical limitations bring the need for innovative design architectures or alternate materials with higher carrier transport than current Si based materials. New device designs such as multigate/gate-all-around architectures improve electrostatics while alternate materials like III-Vs such as III-As for electrons and III-Sbs for holes increase operational speed, lower power dissipation and thereby improve performance of the transistors due to their low effective mass and faster transport properties. Further, application of …

Reduction Of Mutual Coupling In Antenna Technology Using Elliptically Shaped Metasurfaces, Gabriel Moreno

Electronic Theses and Dissertations

This thesis is devoted to the use of metasurfaces for the goals of the reduction of mutual coupling between closely spaced antennas and the increase of antenna bandwidth. This is done first using a graphene monolayer as a cloak to decrease mutual coupling and restore radiation patterns for closely spaced antennas at THz frequencies. The introduction of the graphene monolayer was also extensively studied in regards to the effect on the radiation properties of the antennas. The use of metasurfaces also has other applications, in particular with the bandwidth of antennas, where an anisotropic metasurface can be used to drastically …

Estimating Local Average Power In A Line-Of-Sight Indoor Channel: Spatial Sampling And Processing, Israt Jahan Disha

Theses and Dissertations

Modeling of indoor radio channels has been a dynamic area of research in recent years because of the increasing demand for indoor wireless communications. In order to efficiently deploy such indoor systems, a good knowledge of the indoor wireless channel’s characteristics are required. One important characteristic is an accurate propagation path loss model. For developing such models various measurements have been carried out. In modeling propagation path loss in complex indoor environments, accurate and fast algorithms for estimating the local mean signal level are essential; these are also of use for power control and handoff decisions. These local mean power …

Applications Of Impedance Identification To Electric Ship System Control And Power Hardware-In-The-Loop Simulation, Jonathan Siegers

Theses and Dissertations

Recent advances in semiconductor technology, controls, and switching converter topologies have resulted in the increasing application of power electronics in power distribution systems. Power electronic enabled distribution systems have inspired a renewed interest in DC distribution architectures as an appealing alternative to traditional AC methods due to the significant performance and efficiency gains they offer. However, the notional power electronic based DC distribution system is a complex and extensively interconnected system consisting of multiple power converters. As a result, a number of system-level challenges related to stability arise due to interaction among multiple power converters. In addition, the power distribution …

Miniaturized Rf Components With A Novel Tunable Engineered Substrate For Wireless Communication Systems, Yujia Peng

Theses and Dissertations

There is an increasing demand for reliable sensor system capable of remote sensing and measuring interesting data. Although large communication range can be achieved, active wireless communication systems are still suboptimal in longtime applications due to their harmful battery supply. Inductively coupled passive devices, with the advantages in safe long-term implanting, structural simplicity, small fabrication footprint and low-cost production, are preferred in chronic monitoring, but little work has been done to optimize the performance of these systems, especially under some design constraints.

The model and optimization of an inductively coupled wireless pressure sensor system is presented in this dissertation. With …

A Comparison Of Fpga Implementation Of Latency-Based Solvers For Power Electronic System Real-Time Simulation, Matthew Aaron Milton

Theses and Dissertations

In the design of power systems, real-time simulation is a powerful tool to evaluate and validate designs before dedicating resources to develop such systems. Through use of real-time simulation, one can study the behavior of a power system in interaction with real, physical elements, all while avoiding the cost and risk in constructing and testing such systems before a design is finalized. In recent decades, effort has been made in the industry and academia to apply real-time simulation to that of switching power converters through use of high-speed digital signal processors (DSPs) and field programmable gate array (FPGA) devices. With …

Wireless Channel Modeling For Networks On Chips, William Rayess

Theses and Dissertations

The advent of integrated circuit (chip) multiprocessors (CMPs) combined with the continuous reduction in device physical size (technology scaling) to the sub-nanometer regime will result in an exponential increase in the number of processing cores that can be integrated within a single chip. Today’s CMPs already support tens to low hundreds of cores and both industry and academic roadmaps project that future chips will have thousands of cores. Therefore, while there are open questions on how to harness the computing power offered by CMPs, the design of power-efficient and compact on-chip interconnection networks that connects cores, caches and memory controllers …

Creating Multi-Functional G-Code For Multi-Process Additive Manufacturing, Efrain Aguilera Jr

Open Access Theses & Dissertations

Additive manufacturing (AM) started over thirty years ago and with it a manufacturing revolution that moves industrial production into the personal home. With recent interest shifting into multi-functional parts fabricated through AM technologies, unified systems are being developed. Merging different manufacturing technologies into one single machine is a challenge but undergoing research has shown promise in the development of multi-functional systems. Concurrent work is being done in the software, automation, and hardware aspect of multi-functional systems. An effort to use industry compatible Computer Aided Design (CAD) software to design multi-functional parts including circuits, micro-machining, and foil embedding then exporting and …

A Spatially Variant Metamaterial Design Process For Transformation Electromagnetic Devices, Eric Alan Berry

Open Access Theses & Dissertations

A technique for the implementation of devices designed using transformation optics (TO) is presented using metamaterial elements arranged using spatially variant lattices. A description of transformation optics, including the design of arbitrarily shaped devices by solving Laplace's equation numerically, is discussed. Analysis of a variety of metamaterial unit cells using frequency sweeps of the unit cells with the resulting permittivity and permeability values. Metamaterial unit cells are also analyzed by the scaling of all the features of the metamaterial elements in the unit cell and calculating the permittivity and permeability. Finite- difference time domain (FDTD) and finite-difference frequency domain (FDFD) …

Adaptive Switched Capacitor Voltage Boost For Thermoelectric Generation, Rene A. Brito

Open Access Theses & Dissertations

Thermoelectric generators (TEG) and other forms of energy harvesting often provide voltages that are not directly usable by traditional electronics as levels are too low from the TEG. While increasing the number of thermoelectric elements can ultimately increase the power output, there is a tradeoff between size and power. By implementing charge pumps, a proposed circuit technique is described that can boost the TEG output to levels that can be used for energy harvesting applications. Current voltage boost circuits for TEGs simply boost a voltage by a set amount. The proposed circuit consists of an analog chip, to provide several …

Numerical Calculation Of Spatially Variant Anisotropic Metamaterial, Asad Ullah Hil Gulib

Open Access Theses & Dissertations

3D printing, or additive manufacturing, is rapidly evolving into a mainstream manufacturing technology that is creating new opportunities for electromagnetics and circuits. 3D printing permits circuits to fully utilize the third dimension allowing more functions in the same amount of space and allows the devices to have arbitrary form factors. 3D printing is letting us discover new physics that is not possible in standard 2D circuits and devices. However, evolving electromagnetics and circuits into three dimensions introduces some serious problems like thermal management, interference, and mutual coupling between the components which degrades performance and hurts signal integrity.

Metamaterials are engineered …

Blind Image Deconvolution Based On Sparsity: Theoretical Justification And Improvement Of State-Of-The-Art Techniques, Fernando Cervantes

Open Access Theses & Dissertations

Observed signals and images are distorted by noise and blurring. In precise terms, blurring is a convolution of the original image with some blurring function. From this viewpoint, to reconstruct the original image, we need to reverse the effects of this convolution, i.e., to ``deconvolve'' the image. Many efficient methods for image deconvolution are known. However, most of these methods assume that we know the blurring function -- or at least that we have some partial information about the blurring function. In some practical situations, however, we do not have this information. In such situations, we need to perform, blind …

Synthesis, Device Fabrication, And Characterization Of Two-Dimensional Molybdenum Disulfide, Gustavo Alberto Lara Saenz

Open Access Theses & Dissertations

The miniaturization of electronic devices according to Moore's Law has been propelled by the continuous demand for faster and smaller devices which continue to advance technology. One recent contribution to this trend was the isolation and characterization of one atom thick of graphite, known as graphene, which led to the Nobel Prize in physics in 2010 being awarded to Andre Geim and Konstantin Novoselov. Graphene and its related nanocarbon derivatives have exceptional mechanical, thermal, optical and electronic properties, making them a potential candidate for electronics and optoelectronics applications. However, this material has no intrinsic bandgap and complicated processes are required …

Study Of Novel Power Semiconductor Devices For Performance And Reliability., Karthik Padmanabhan

Electronic Theses and Dissertations

Power Semiconductor Devices are crucial components in present day power electronic systems. The performance and efficiency of the devices have a direct correlation with the power system efficiency. This dissertation will examine some of the components that are commonly used in a power system, with emphasis on their performance characteristics and reliability. In recent times, there has a proliferation of charge balance devices in high voltage discrete power devices. We examine the same charge balance concept in a fast recovery diode and a MOSFET. This is crucial in the extending system performance at compact dimensions. At smaller device and system …

Impact Of Wireless Channel Uncertainty Upon M-Ary Distributed Detection Systems., Zahra Hajibabaei Najafabadi

Electronic Theses and Dissertations

We consider a wireless sensor network (WSN), consisting of several sensors and a fusion center (FC), which is tasked with solving an $M$-ary hypothesis testing problem. Sensors make $M$-ary decisions and transmit their digitally modulated decisions over orthogonal channels, which are subject to Rayleigh fading and noise, to the FC. Adopting Bayesian optimality criterion, we consider training and non-training based distributed detection systems and investigate the effect of imperfect channel state information (CSI) on the optimal maximum a posteriori probability (MAP) fusion rules and detection performance, when the sum of training and data symbol transmit powers is fixed. Our results …

Model Selection Via Racing, Tiantian Zhang

Electronic Theses and Dissertations

Model Selection (MS) is an important aspect of machine learning, as necessitated by the No Free Lunch theorem. Briefly speaking, the task of MS is to identify a subset of models that are optimal in terms of pre-selected optimization criteria. There are many practical applications of MS, such as model parameter tuning, personalized recommendations, A/B testing, etc. Lately, some MS research has focused on trading off exactness of the optimization with somewhat alleviating the computational burden entailed. Recent attempts along this line include metaheuristics optimization, local search-based approaches, sequential model-based methods, portfolio algorithm approaches, and multi-armed bandits. Racing Algorithms (RAs) …

Design And Characterization Of System Level Electrostatic Discharge (Esd) Protection Solutions, Yunfeng Xi

Electronic Theses and Dissertations

Electrostatic Discharges (ESD) are one of the main reliability threats in modern electronics. Design, implementation, and characterization of ESD and transient protection of these modern electronics are increasingly challenging due to the process, packaging and cost constraints. Growing communication between ‘objects’ to be sensed and controlled remotely is creating opportunities for greater integration with computer systems, resulting in improved efficiency, accuracy and economic benefits across existing and emerging network infrastructures. This tendency is driving an expansion in data communication as well as industrial applications environment. To keep up with the interconnectivity expansion, the industry requires new devices to support more …

Microgrid Control And Protection: Stability And Security, Morteza Keshavarztalebi

Electronic Theses and Dissertations

When the microgrid disconnects from the main grid in response to, say, upstream disturbance or voltage fluctuation and goes to islanding mode, both voltage and frequency at all locations in the microgrid have to be regulated to nominal values in a short amount of time before the operation of protective relays. Motivated by this, we studied the application of intelligent pinning of distributed cooperative secondary control of distributed generators in islanded microgrid operation in a power system. In the first part, the problem of single and multi-pinning of distributed cooperative secondary control of DGs in a microgrid is formulated. It …

High Average Power Nanosecond Pulsed Tm:Fiber Laser For Pumping An Optical Parametric Oscillator, Ali Abdulfattah

Electronic Theses and Dissertations

Thulium-doped fiber lasers operating with wavelengths in the vicinity of 2 µm are useful for several emerging applications including generating mid-IR light via nonlinear frequency conversion. In this study we describe the design and construction of a thulium fiber laser system comprising a master oscillator and a power amplifier. The first stage is a Q-switched, thulium-doped photonic crystal fiber oscillator utilizing an acousto-optic modulator to produce 65-80 nanosecond pulses. A diffraction grating in the cavity provides wavelength tunability from 1.8 – 2µm. The oscillator produced up to 3 W of average power and 150 µJ pulse energies, corresponding to 2.3 …

Investigation Of The Effect Of Rain On Sea Surface Salinity, Andrea Santos Garcia

Electronic Theses and Dissertations

The Aquarius/SAC-D mission provided Sea Surface Salinity (SSS), globally over the ocean, for almost 4 years. As a member of the AQ/SAC-D Cal/Val team, the Central Florida Remote Sensing Laboratory has analyzed these salinity measurements in the presence of precipitation and has noted the high correlation between the spatial patterns of reduced SSS and the spatial distribution of rain. It was determined that this is the result of a cause and effect relation, and not SSS measurement errors. Thus, it is important to understand these salinity changes due to seawater dilution by rain and the associated near-surface salinity strati?cation. This …