Engineering Commons^™

Life Cycle Cost Analysis Of High Friction Surface Treatment Applications, Eslam Deef-Allah, Korrenn Broaddus, Magdy Abdelrahman

Civil, Architectural and Environmental Engineering Faculty Research & Creative Works

Life cycle cost analyses for high friction surface treatment (HFST) applications were executed relying on a Microsoft Excel program developed by the researchers. Calcined bauxite (CB), five CB alternatives, and epoxy binder were utilized in the HFST applications. The aggregates' performances were evaluated through the aggregate image measurement system (AIMS) before and after Micro-Deval polishing. The performance of the HFST applications was evaluated by the dynamic friction tester (DFT) and British pendulum (BP). The major purpose of this program was to present a rational method for converting different input data (project and material specifics) to comparable output data (net present …

The Impact Of Offsite Construction On The Workforce: Required Skillset And Prioritization Of Training Needs, Rayan H. Assaad, Islam H. El-Adaway, Makarand Hastak, Kim Lascola Needy

Civil, Architectural and Environmental Engineering Faculty Research & Creative Works

Offsite construction has showed great potential in addressing many of the industry's problems. While multiple research efforts have been directed at examining different offsite construction aspects, few studies investigated the workforce-related aspects. Therefore, this study aims to address this knowledge gap by examining the impact of offsite construction on the workforce, as represented by the following five workforce categories: offsite, onsite, engineering and design, construction and fabrication, and administrative workforce. To this end, this paper (1) determined the impact of offsite construction on the skillset (reskilling or upskilling) and the demand (shrink or growth) for the offsite and onsite construction …

A Proactive Risk Assessment Framework To Maximize Schedule Benefits Of Modularization In Construction Projects, Mohamad Abdul Nabi, Islam H. El-Adaway

Civil, Architectural and Environmental Engineering Faculty Research & Creative Works

Various studies developed models and decision support tools to assess the feasibility and optimize the use of modularization. However, none has explored the schedule benefits of modular construction. This paper fills this knowledge gap. To this end, the authors completed the following: (1) analyzed the criticalities of the various modular risk factors on potential schedule savings using data collected from 48 industry professionals, (2) investigated the schedule savings associated with the use of modularization using data collected from 68 modular construction projects, and (3) developed an interrelated assessment model to calculate the schedule savings of using modularization. The provided model …

Classifying Mixing Regimes In Ponds And Shallow Lakes, Meredith A. Holgerson, David C. Richardson, Joseph Roith, Lauren E. Bortolotti, Kerri Finlay, Daniel J. Hornbach, Kshitij Gurung, Andrew Ness, Mikkel R. Andersen, Sheel Bansal, Jacques C. Finlay, Jacob A. Cianci-Gaskill, Shannon Hahn, Benjamin D. Janke, Cory Mcdonald, Jorrit P. Mesman, Rebecca L. North, Cassandra O. Roberts, Jon N. Sweetman, Jackie R. Webb

Michigan Tech Publications, Part 1

Lakes are classified by thermal mixing regimes, with shallow waterbodies historically categorized as continuously mixing systems. Yet, recent studies demonstrate extended summertime stratification in ponds, underscoring the need to reassess thermal classifications for shallow waterbodies. In this study, we examined the summertime thermal dynamics of 34 ponds and shallow lakes across temperate North America and Europe to categorize and identify the drivers of different mixing regimes. We identified three mixing regimes: rarely (n = 18), intermittently (n = 10), and often (n = 6) mixed, where waterbodies mixed an average of 2%, 26%, and 75% of the study period, respectively. …

Investigating The Proper Use Of Litani River Basin Based On Water Quality, Mohamad Diab, Mohamad Soliman

BAU Journal - Science and Technology

Litani River Basin (LRB) with a 170km length and annual river flow of 750 MCM is considered the most important water resource in Lebanon. Unfortunately, the river is facing water contamination as a result of human practices. Water Quality assessments was performed in the Litani River Basin using a combination of Principal Component Analysis method (PCA) and Water Quality Index method (WQI). Results revealed the improvement of the water quality significantly after passing lake Qaraoun. Moreover, according to WQI, Lower LRB water is ranked ‘’Good’’ for irrigation and ‘’BAD’ for drinking purposes. Microbial contamination is found to be the key …

Mechanical And Durability Properties Of Geopolymer Concrete – A Review, Lelian Elkhatib, Fadi Al Aridi, Adel Elkordi, Jamal Khatib

BAU Journal - Science and Technology

Owing to the ongoing increase in human population, there is a need for more construction projects including residential buildings and other amenities. Concrete is by far the dominant material used in construction and cement is a main ingredient. Cement manufacture is an energy intensive process and emit large amounts of carbon dioxide into the atmosphere. A reduction in the amount of cement used in construction is greatly beneficial. The use of geopolymer or alkali activated materials can serve this purpose as it attempts to totally replace cement in concrete. Geopolymers are materials that consist mainly of silica and alumina materials …

Production Of Low-Cost Self-Consolidating Concrete (Scc) Using Manufactured Aggregates, Rabab Raydan, Farah Chamseddine, Ali Jahami, Oussama Baalbaki, Jamal Khatib, Adel Elkordi

BAU Journal - Science and Technology

Limitations to the sources of aggregates and the unavailability of sand is becoming a problematic issue for concrete production. A novel technology of manufactured aggregates can produce well graded round aggregates that can substitute natural aggregates while maintaining the same characteristics needed and preserving the resources. Self-Consolidating Concrete (SCC) using manufactured aggregates is assessed in this experimental work to understand the variability of workability properties and mechanical properties with the changes in w/c ratio and percentages of Coarse Aggregates and Manufactured Sand to Natural Sand in order to choose the best mixture that satisfies an adequate overall performance. Targeting compressive …

Modelling Monthly Rainfall Of Calabar, Nigeria Using Box-Jenkins (Arima) Method, Francis Ogbozige

Tanzania Journal of Engineering and Technology (TJET)

Rainfall has both positive and negative effects on human activities hence, correct prediction of the period of occurrence is very essential. However, the traditional method of predicting months of heavy rainfall is gradually fading out as irregular rainfall pattern is been experienced in most regions of the world. The rainfall pattern in Calabar city in Southern Nigeria has been reported in past literatures of being irregular. Hence, this research applied the Auto-Regressive Integrated Moving Average (ARIMA) also known as Box-Jenkins method to model the rainfall pattern of Calabar. This was achieved by subjecting 50years monthly rainfall (1971 – 2020) to …

Development Of Software Tools For Efficient And Sustainable Process Development And Improvement, Jake P. Stengel

Theses and Dissertations

Infrastructure is a key component in the well-being of our society that leads to its growth, development, and productive operations. A well-built infrastructure allows the community to be more competitive and promotes economic advancement. In 2021, the ASCE (American Society of Civil Engineers) ranked the American infrastructure as substandard, with an overall grade of C-. The overall ranking suffers when key infrastructure categories are not maintained according to the needs of the population. Therefore, there is a need to consider alternative methods to improve our infrastructure and make it more sustainable to enhance the overall grade. One of the challenges …

Modified Biosand Filtration Using Aluminum Hydroxide Filter Media To Enhance Fluoride Removal, Joshelyn Guimaray

USF Tampa Graduate Theses and Dissertations

There are over 20 countries whose citizens consume groundwater containing high levels of fluoride, including Nigeria, Mexico, India, China, and Ghana, which all have major health crises when it comes to the safety of their drinking water. Minerals like fluorite contain fluoride which is often found in groundwater aquifers. The minerals release fluoride into the groundwater. Per the World Health Organization (WHO) standard, the maximum contaminant limit for fluoride consumption should be less than 1.5 mg/L. Chronic exposure of elevated levels of fluoride can cause people to suffer debilitating health effects, such as dental and skeletal fluorosis. Dental fluorosis causes …

A Convergent Approach To Aqueous Lead (Pb) Mitigation Of A Supplemental Self-Supply Shallow Groundwater Source Accessed By Handpumps In Madagascar, Adaline Marie Buerck

USF Tampa Graduate Theses and Dissertations

The World Health Organization (WHO) has consistently listed lead (Pb) as one of the ten chemicals of major public health concern. Though the toxic nature of lead has been known since the 20th century it is still utilized in a wide variety of products due to its favorable properties. Exposure to lead still accounts for approximately 900,000 deaths annually and disproportionately impacts those in low- and middle-income countries (LMIC) due to a variety of reasons such as poverty, malnutrition, and lack of knowledge on the toxic nature of lead. Lead exposure routes include air, soil, dust, diet, and water. Though …

The Effective Strategies For Mitigation The Impact Of Covid-19 On Construction Projects In Egypt, Nora Magdy Essa, Ibrahim Mahdi, Hassan Mohamed Ibrahim

Future Engineering Journal

From the time when the first narrated infections in Wuhan China, in late 2019, COVID-19 has had a substantial peal on human life and health. By the early of 2020, the World Health Organization (WHO) announced the eruption of COVID-19, a public health crisis of international concern. On 11 March 2020, the World Health Organization officially announced COVID-19 a pandemic. The first case was infected in Egypt of covid-19 on Feb 14, 2020 (Gilbert et al., 2020). On 16 March 2020, the Egyptian Government began issuing decisions as preventative courses as part of the country's inclusive plan to cope with …

Structural Dynamics Of Awt-27 Wind Turbine Blade, Amr Ismaiel

Future Engineering Journal

Wind energy is one of the world’s current leading renewable energy resources. One of the major aspects of studying wind turbines is the structural dynamics for the turbine structure including blades and support structure. In the current work, the blades of the Advanced Wind Turbine (AWT-27) are investigated in a dynamic approach. Different wind fields have been generated for the study to provide different Design Load Conditions (DLCs). Three laminar wind velocities of 5 m/s, 12 m/s, and 17 m/s were simulated. Turbulent wind flow fields have also been generated at the three standard classes A, B and C of …

Estimating The Weights Of Latticed Power Transmission Towers Using Genetic Programming, Ahmed M. Ebid Dr.

Future Engineering Journal

The recent booming in the power network industry inspired a lot of researchers to develop models to estimate the optimum cost of transmission towers. Unlike previous researches which depended on design the tower from scratch, this research depends on collecting actual database from several projects around the globe and applying the well-known (GP) technique to develop a model to predict the tower weight. The accuracy of the developed formula was about 84%. The developed model could be used in early tender stage or to check design economy.

Passive Radiative Cooling By Spectrally Selective Nanoparticles In Thick Film Nanocomposites, David Allen Young

USF Tampa Graduate Theses and Dissertations

Passive cooling of buildings is a benefit to society since no energy input is required for space cooling which reduces electricity consumption, fossil fuel burning, and greenhouse gas emissions. When a passive cooling technology radiates heat from the earth through the atmospheric windows to space higher levels of cooling power are possible -- this phenomenon is classified as passive “radiative” cooling. Spectrally selective surface coatings provide radiative cooling to lower surface temperatures by reflecting most solar radiation, while emitting infrared radiation at wavelengths between 8-13 μm through the primary atmospheric window to the cold of space. Multiple applications of radiative …

Development Of A Covid-19 Vulnerability Index (Cvi) For The Counties And Residents Of New Jersey, Remo Victor Disalvatore

Theses and Dissertations

The COVID-19 pandemic has impacted countless aspects of everyday life since it was declared a global pandemic by the World Health Organization in March of 2020. From societal to economic impacts, COVID-19 and its variants will leave a lasting impact on our society and the world. Approximately $9 trillion has been spent on fighting the pandemic around the world. During the pandemic, it became increasingly evident that indices, such as the Center for Disease Control (CDC) Social Vulnerability Index (SVI), were extremely important for predicting vulnerabilities in a community. The CDC's SVI provides important estimates on which communities will be …

Laboratory Assessement Of Emulsion-Cement Paste And Cold Recycled Mixtures At Varying Amounts Of Emulsion, Cement, And Water, Ahmed Saidi

Theses and Dissertations

The main objective of this study was to assess the performance of cold recycled mixtures (CRMs) at: (1) binder level through evaluating the rheological and mechanical properties of emulsion-cement paste (ECP), and (2) mix level through characterizing the density and performance of CRMs. The testing program for ECPs included multiple stress creep recovery (MSCR), bending beam rheometer (BBR), linear amplitude sweep (LAS), penetration test, and isothermal calorimetry. For CRMs, a balanced mix design (BMD) approach was used to develop performance interaction charts to select optimum contents of emulsion, cement, and water maximizing the resistance of CRMs to rutting and cracking. …

Fragmentation Of Chemically Herded Oil Slicks By Obstacles: Visualizations, Flow Measurements, And Spatial Distributions, Ali Alshamrani

USF Tampa Graduate Theses and Dissertations

Chemical herders are a promising technique for treatment of oil spills in icy waters at high latitudes. However, obstacles on the water surface such as floating ice affects or interferes with all spill response countermeasures including chemical herder operations by fracturing the contracting oil slick and trapping small oil patches. Chemical herders are likely to be especially useful in containing oil spills in remote, ice-infested Arctic waters, where using booms to contain an oil slick is difficult. Much of the previous research into chemical herder has focused on the effectiveness of different types of chemical herder agents to thicken oil …

Exploring Toluene Biosynthesis In Microbial Consortia Derived From Sediments And Superfund Site Groundwater, Raymond J. Poche

LSU Master's Theses

While the aromatic hydrocarbon toluene is widely regarded as a contaminant associated with discharges of crude oil and refined petroleum products (e.g., gasoline), the enzyme phenylacetate decarboxylase catalyzes the decarboxylation of phenylacetate to yield toluene. Research described in this thesis further investigated toluene biosynthesis by a microbial consortium originating from chlorinated solvent-contaminated groundwater near Baton Rouge, Louisiana. In anoxic growth media supplemented with phenylacetate as a precursor, toluene accumulation was found to be maximal at near-neutral to slightly acidic pHs (toluene accumulation greater than 1 mg/L at pH in the range of 5.6 to 7.6, but was not observed for …

Unconventional Water Resources: Global Opportunities And Challenges, Zahra Karimidastenaei, Tamara Avellán, Mojtaba Sadegh, Bjørn Kløve, Ali Torabi Haghighi

Civil Engineering Faculty Publications and Presentations

Water is of central importance for reaching the Sustainable Development Goals (SDGs) of the United Nations. With predictions of dire global water scarcity, attention is turning to resources that are considered to be unconventional, and hence called Unconventional Water Resources (UWRs). These are considered as supplementary water resources that need specialized processes to be used as water supply. The literature encompasses a vast number of studies on various UWRs and their usefulness in certain environmental and/or socio-economic contexts. However, a recent, all-encompassing article that brings the collective knowledge on UWRs together is missing. Considering the increasing importance of UWRs in …

Risks Assessment Using Structural Equation Modeling: Mega Housing Projects Construction In Egypt, Mohamed Nabawy

Civil Engineering

The Mega Housing Projects (MHP) construction in Egypt is saddled with numerous risks that emerged from the risk knowledge dearth, steering these projects to elusive failure apropos to completion time and construction cost. The research's novel contribution is a risk assessment Structural Equation Modeling (SEM) approach that spotlights the critical risk factors confronting MHP in Egypt concerning Probability of Occurrence (POO), Impact on Time (IOT), and Impact on Cost (IOC), from the contractors’ perspective. Forty-three risk factors were amassed from the literature and lessened to 25, delineating the significant risks impacting the MHP schedule and budget resentfully. The primary paper's …

Evaluation Of Aluminum Dissolution, Current Density, And Pitting Patterns During Electrocoagulation, Monica Castro Carias

USF Tampa Graduate Theses and Dissertations

Electrocoagulation (EC) is a sustainable water treatment process involving the generation of coagulants on-site through the application of a voltage on metal (usually aluminum or iron alloys). The factors that impact EC system performance have been well researched, however further research is needed on the factors that impact anodic dissolution of aluminum electrodes, especially when the technology is transferred to full-scale applications. Electrode fouling is one of the factors that can impact dissolution of the anode during EC due to the formation of a protective oxide/hydroxide layer on the electrode surface. Previous studies have addressed electrode fouling by reversing polarity, …

Degradation Performance Modeling And Optimal Maintenance Planning Of Deteriorating Critical Infrastructures, Hung Q. Nguyen

USF Tampa Graduate Theses and Dissertations

Serving as the backbone of the nation’s economy, a large and growing number of deteriorating critical infrastructures, such as transportation and water infrastructures, are underperforming, aging, becoming structurally deficient, and must be repaired or replaced. Due to the influence of a variety of factors (e.g., material structure, design, operation, and environmental conditions) at different phases of lifecycle and the costly data acquisition process, field degradation of deteriorating infrastructures is highly uncertain with limited degradation data. The co-location and spatial proximity between many infrastructures, such as road and water infrastructures, further makes them physically and operationally interdependent. The sheer deterioration of …

Simulating Flood Control In Progress Village, Florida Using Storm Water Management Model (Swmm), Azize Minaz

USF Tampa Graduate Theses and Dissertations

Flooding is a natural event caused by heavy rains, melting snow, high tides, and anthropogenic impacts such as channel clogging, improper land use, and deforestation. In this study, the strategies for controlling flooding seek to establish flood prevention systems by implementing grey infrastructure and green infrastructure practices. The main objective of this thesis is to analyze the study area, Progress Village Neighborhood in Delaney Creek Watershed, regarding flood risk and flood mitigation techniques. The analysis was performed using EPA SWMM 5.1 and Arcmap 10.7.1. The study used design storms,10-years 24 hours and 25-years 24 hours, to analyze flood risk in …

Cutting-Edge Technologies To Achieve A Higher Level Of Modular Construction – Literature Review, Seungtaek Lee, Jin Ouk Choi, Seung Song

Civil and Environmental Engineering and Construction Faculty Research

Cost overruns, schedule delays, and a shortage of skilled labor are common problems the construction industry is currently experiencing. Modularization and standardization strategies have the potential to resolve the various problems mentioned above and have been applied for various construction applications for a long time. However, the level of modularization remains low, and modular construction projects have not been getting the full benefits. Thus, this review investigated the cutting-edge technologies currently being utilized to develop the modular construction field. For this paper, qualified research papers were identified using predetermined keywords from previous related research papers. Identified literature was then filtered …

Impedance Analysis Of Anodized Aluminum And Structural Bridge Tendons, Justin Silnutzer

USF Tampa Graduate Theses and Dissertations

This is a two-part thesis with the overall investigation technique being electrochemical impedance spectroscopy (EIS). In the first part, EIS is used to estimate the layer thickness of anodized aluminum oxide. This required the development of an appropriate electrical circuit model; that with parameters that correspond to physical properties of the oxide. In this work, it was found that for thicker oxides of which the outer porous layer is greater than 12 microns, impedance may be used to estimate the outer layer thickness. However, further research is required to understand the role of outer porous layer structure on the impedance …

Design And Commissioning Of An E-Beam Irradiation Beamline At The Upgraded Injector Test Facility At Jefferson Lab, Xi Li, Helmut Baumgart, Charles Bott, Gianluigi Ciovati, Shaun Gregory, Fay Hannon, Mike Mccaughan, Robert Pearce, Matthew Poelker, Hannes Vennekate, Shaoheng Wang

Electrical & Computer Engineering Faculty Publications

The Upgraded Injector Test Facility (UITF) at Jefferson Lab is a continuous-wave superconducting linear accelerator capable of providing an electron beam with energy up to 10 MeV. A beamline for electron-beam irradiation has been designed, installed and successfully commissioned at this facility, aimed at the degradation study of 1,4-dioxane and per- and polyfluoroalkyl substances (PFAS) in wastewater treatment. A solenoid with a peak axial magnetic field of up to 0.28 T and a set of raster coils were used to obtain a Gaussian beam profile with a transverse standard deviation of ∼15.0 mm at the target location. Monte-Carlo simulations using …

An Improved Polynomial Chaos Expansion Based Response Surface Method And Its Applications On Frame And Spring Engineering Based Structures, Mhd A. Hafez

ETD Archive

In engineering fields, computational models provide a tool that can simulate a real world response and enhance our understanding of physical phenomenas. However, such models are often computationally expensive with multiple sources of uncertainty related to the model’s input/assumptions. For example, the literature indicates that ligament’s material properties and its insertion site locations have a significant effect on the performance of knee joint models, which makes addressing uncertainty related to them a crucial step to make the computational model more representative of reality. However, previous sensitivity studies were limited due to the computational expense of the models. The high computational …

Phased Construction Bridges: Monitoring And Analysis For Traffic-Induced Vibration, Khalid Al-Kady, Christine E. Wittich, Richard L. Wood, George Morcous

Nebraska Department of Transportation: Research Reports

Phased construction is a common technique utilized to allow bridges to remain partially open to traffic throughout the construction process. The segment of the bridge deck that is constructed second cures under the effect of traffic-induced vibration transmitted from the adjacent bridge-deck segment, which is open to traffic. However, subjecting bridge decks to traffic-induced vibration during early-age curing raises concerns about the durability of the decks. The primary goal of this study is to generate a fundamental understanding of the transmission of traffic-induced vibration, the extent of degradation on phased construction bridge decks, and the impact of potential mitigation measures. …

Legal Characterization Of The Challenges Faced By The Construction Industry During Covid-19 And Devaluation Of The Egyptian Pound, Riham Abuzaid

Theses and Dissertations

With all the challenges this past decade has inflicted on the economy on a global scale, Egypt had its share with two major events, starting with the Egyptian pound devaluation against the U.S dollar in 2016 and currently the emergence of the COVID-19 pandemic. These major events instigated the interference of the legal/contractual sectors in the construction market to find solutions that range from agreeable to stringent to protect the assets of their beneficiaries.

Both events are impactful and require extensive analysis to determine and classify each situation. This thesis addresses the implementation of standard internationally acknowledged legislative acts used …