Engineering Commons^™

Structural Health Monitoring Of Fatigue Cracks For Steel Bridges With Wireless Large-Area Strain Sensors, Sdiq Anwar Taher, Jian Li, Jong-Hyun Jeong, Simon Laflamme, Hongki Jo, Caroline Bennett, William N. Collins, Austin Downey

Faculty Publications

This paper presents a field implementation of the structural health monitoring (SHM) of fatigue cracks for steel bridge structures. Steel bridges experience fatigue cracks under repetitive traffic loading, which pose great threats to their structural integrity and can lead to catastrophic failures. Currently, accurate and reliable fatigue crack monitoring for the safety assessment of bridges is still a difficult task. On the other hand, wireless smart sensors have achieved great success in global SHM by enabling long-term modal identifications of civil structures. However, long-term field monitoring of localized damage such as fatigue cracks has been limited due to the lack …

The Effects Of Recycled Waste On Concrete Mixture Properties, Noral Hadbawi

Master of Science in Civil Engineering Theses

Recent years have seen an exponential increase in plastic product consumption worldwide. Manufacturing, and individuals rely on plastics in almost every aspect, as a result, a negative impact on the environment is detected due to the large quantities and low biodegradability of plastic waste. The massive amount of plastic waste and end-of-life tires produced annually required a vast area of landfills, which became a major concern far and wide. To address these issues, an eco-friendly approach consisting of incorporating plastic and rubber waste into engineering applications, such as plastic concrete, and rubberized concrete was proposed. A primary objective of this …

A Deep Learning Image Segmentation Model For Agricultural Irrigation System Classification, Ehsan Raei, Ata Akbari Asanjan, Mohammad Reza Nikoo, Mojtaba Sadegh, Shokoufeh Pourshahabi, Jan Franklin Adamowski

Civil Engineering Faculty Publications and Presentations

Effective water management requires a large-scale understanding of agricultural irrigation systems and how they shift in response to various stressors. Here, we leveraged advances in Machine Learning and availability of very high resolution remote sensing imagery to help resolve this long-standing issue. To this end, we developed a deep learning model to classify irrigation systems at a regional scale using remote sensing imagery. After testing different model architectures, hyper parameters, class weights and image sizes, we selected a U-Net architecture with a Resnet-34 backbone for this purpose. We applied transfer learning to increase training efficiency and model performance. We considered …

Construction Industry Cluster: An Investigation Of Its Existence In Pakistan, Muhammad Yanzar Sarim

2022 REYES Proceedings

Introduction: Clusters can be defined as a geographical concentration of industries and institutes that are unified and interconnected. These industries and institutes are not just physically close to each other but also gain some advantage from being near to each other.

Supporting Information For “Predictions Of Household Water Affordability Under Conditions Of Climate Change, Demographic Growth, And Fresh Groundwater Depletion In A Southwest Us City Indicate Increasing Burdens On The Poor”, Josiah Heyman, Alex Mayer, Jessica Alger

Departmental Papers (CE)

The Supporting Information contains (a) supplemental tables of annual volumes and costs for each water supply source and by year for each scenario (see Supplemental Information.pdf), (b) the census tract numbers used in the analysis of incomes spent on water (see Supplemental Information.pdf), (c) a correlation matrix for demographic variables and the fraction of households in a census tracts paying > 5% for water in 2070 for the worst case scenario (see Supplemental Information.pdf), and (d) the shapefiles for the El Paso Water utility service area boundaries (see compressed folder boundary11.24.21.gdb).

Wastewater-Derived Ammonia For A Green Transportation Fuel, Joseph Kalman, Maryam Haddad

Mineta Transportation Institute

The energy-water nexus (i.e., availability of potable water and clean energy) is among the most important problems currently facing society. Ammonia is a carbon-free fuel that has the potential to reduce the carbon footprint in combustion related vehicles. However, ammonia production processes typically have their own carbon footprint and do not necessarily come from sustainable sources. This research examines wastewater filtration processes to harvest ammonia for transportation processes. The research team studied mock wastewater solutions and was able to achieve ammonia concentrations above 80%(nanofiltration) and 90% (reverse osmosis). The research team also investigated the influence of transmembrane pressure and flow …

Contracting Strategies: A Different Approach To Address Long-Term Performance, Maria Calahorra-Jimenez

Mineta Transportation Institute

For cost-efficiency, public safety, and sustainability, improving long-term performance in highway projects is imperative for public administrations. Project delivery and procurement methods provide an opportunity to align design and construction processes with this goal. While previous studies have explored whether project delivery methods impact the long-term performance of highway projects, these studies did not focus on how core elements within project procurement relate to long-term performance. Thus, to fill this gap, this research explores how and to what extent long-term evaluation criteria are considered in design-build best-value procurement of highway projects. To this end, the team conducted content analysis on …

Dice Testing With The Running Chi-Square Distribution, Warren Campbell, Hunter Wimsatt

SEAS Faculty Publications

Dice are not fair. Producing a geometrically precise, uniform die is not possible. Casino dice come as close as possible to perfectly random dice because they are machined to an accuracy of a few ten-thousandths of an inch and the putty used for the pips (dots) is the same density as the plastic die body. Polyhedral dice used in games like Dungeons and Dragons are far more difficult to manufacture to high tolerances. Some dice are fairer than others. Since 20-sided dice (D20s) are very difficult to manufacture precisely, they were the focus of this study. The running chi-square distribution …

Influence Of Rainfall-Induced Erosion On The Stability Of Sandy Slopes Treated By Micp, Shihui Liu, Kang Du, Kejun Wen, Catherine Armwood-Gordon, Lin Li

Civil and Architectural Engineering Faculty Research

As an environmentally friendly technology, microbially induced calcite precipitation (MICP) is widely used to improve the engineering properties of soil. The goal of this study was to investigate the effect of rainfall-induced erosion on the stability of sandy slopes which were treated by MICP technology. The observation of the erosion pattern of low concentration (0.25 M Ca) and high concentration (0.5 M Ca) of MICP-treated slopes, the mechanical behaviors of MICP-treated and cement-treated samples, and the effects of rainfall-induced erosion on the roughness of 0.5 M Ca MICP-treated and 10% cement-treated slope were studied through visual observation, unconfined compressive tests, …

Experimental Study And Piezoresistive Mechanism Of Electrostatic Self-Assembly Of Carbon Nanotubes–Carbon Black/Epoxy Nanocomposites For Structural Health Monitoring, Yanlei Wang, Yao Fu, Ziping Meng, Baolin Wan, Baoguo Han

Civil and Environmental Engineering Faculty Research and Publications

Since electrostatic self-assembly carbon nanotubes–carbon black (CNTs–CB) composite fillers have good electrical conductivity and an easy dispersion process, they were incorporated into epoxy matrix to fabricate the CNTs–CB/epoxy nanocomposites. The mechanical properties, electrical conductivity, piezoresistivity, as well as microstructure characterization of the CNTs–CB/epoxy nanocomposites were experimentally investigated. The piezoresistive mechanisms of the CNTs–CB/epoxy nanocomposites were also established based on tunneling conduction and contacting conduction. The significant improvements in compressive yielding strength and elastic modulus of the nanocomposites could be attributed to the stable interfacial interaction. A moderate percolation threshold was obtained at 0.41 vol% for the CNTs–CB/epoxy nanocomposites in comparison …

Meta-Analysis Of The Prevalence Of Dissolved Organic Nitrogen (Don) In Water And Wastewater And Review Of Don Removal And Recovery Strategies, Synthia P. Mallick, Zayed Mallick, Brooke K. Mayer

Civil and Environmental Engineering Faculty Research and Publications

Most wastewater removal and recovery processes primarily target dissolved inorganic nitrogen (DIN) species, leaving the untreated non-reactive dissolved organic nitrogen (DON) in the effluent. This DON fraction can account for a substantial part of the total nitrogen (N) load. We analyzed large datasets of N species and concentrations (with a focus on quantifying the fraction of DON) in surface water, ground water, and wastewater effluent across the United States. We then reviewed strategies to remove and recover DON based on results of a range of treatment technologies reported in the literature, including laboratory-scale up to full-scale operation in wastewater treatment …

Simple Rebar Anchorage Slip Macromodel Considering Corrosion, Ahmad Soraghi, Qindan Huang

Civil and Environmental Engineering Faculty Research and Publications

Reinforcement slip in the footing of a reinforced concrete (RC) column can significantly influence the lateral displacement of the column, a critical structural response under lateral loads such as seismic loading. Many past researchers studied and developed models to capture the anchorage slip of rebar; however, there is still a need for a model that can reflect the actual bond-slip relationship (especially in the presence of corrosion) and yet is simple-to-use for structural analysis. In this study, a simple bar stress-slip macromodel is developed to predict reinforcement anchorage slip given a rebar stress. The proposed rebar anchorage slip model is …

Seasonal And Spatial Patterns Differ Between Intracellular And Extracellular Antibiotic Resistance Genes In Urban Stormwater Runoff, Kassidy N. O'Malley, Patrick J. Mcnamara, Walter M. Mcdonald

Civil and Environmental Engineering Faculty Research and Publications

Antibiotic resistance is a public health threat that is exacerbated by the dispersion of antibiotic resistance genes (ARGs) into aquatic environments. Urban stormwater runoff has been recognized as a source of and a mechanism by which intracellular ARGs (iARGs) can be transported into receiving environments. The prevalence and behavior of extracellular ARGs (eARGs) in stormwater, however, has yet to be considered. This study quantified four iARGs and eARGs under baseflow and stormflow conditions. Urban stormwater runoff was found to be a source of all the ARGs examined, with the absolute concentration of all iARGs and two eARGs (ermF …

Sequential Electrolysis And Reverse Osmosis To Improve Arsenic Removal From Water, Yizhi Hou, Brooke K. Mayer

Civil and Environmental Engineering Faculty Research and Publications

Reverse osmosis (RO) typically removes >98% arsenate (As[V]) but removes arsenite (As[III]) comparatively poorly (approximately 50%–80%). Therefore, oxidizing As(III) to As(V) can improve arsenic removal using RO. In this study, electrolytic oxidation was used to oxidize As(III) in the feed water, and an extreme low-pressure RO membrane was subsequently used to remove the arsenic. Using Ti/IrO2 electrodes under 30 mA DC current in 500 mg/L NaCl solution primarily generated free chlorine, which completely oxidized 300 μg/L As(III) to As(V). Subsequent arsenic removal by RO increased from 54.2% without oxidation to 98.2% with oxidation. Using electrolysis-RO, arsenic removal significantly increased beyond …

Impact Of Stormwater Infiltration On Rainfall-Derived Inflow And Infiltration: A Physically Based Surface–Subsurface Urban Hydrologic Model, Kun Zhang, Anthony J. Parolari

Civil and Environmental Engineering Faculty Research and Publications

The subsurface fate of stormwater infiltration enhanced by green infrastructure (GI) is unknown. GI redirects stormflows from the surface into the subsurface, which can be partitioned to evapotranspiration or baseflow, or be intercepted by buried infrastructure trenches. Stormwater that infiltrates sanitary sewer pipes is referred to as rainfall-derived inflow and infiltration (RDII) and represents a rapid pathway for infiltrated stormwater to reach receiving waters. To quantify the partitioning of infiltrated stormwater between slow and fast flows, a physically-based hydrologic model was developed integrating coupled surface–subsurface processes and urban sewer systems and applied to a sewershed near Milwaukee, WI. In this …

Ultrasonic Ndt Methods For The Evaluation Of Post-Tensioned Systems With Flexible Fillers, Denis Mcdonald

Doctoral Dissertations and Master's Theses

Non-destructive evaluation of post-tensioned structures with flexible fillers is desperately needed due to their rapid implementation in the State of Florida, primarily in roadway structures. This study provides an overview of existing evaluation methods for traditional post-tensioned structures with cementitious grouts and further explores two promising methods to be applied to flexible filler systems. The first method, diffuse ultrasound spectroscopy, indirectly evaluates posttensioned structures by quantifying the severity of microcracking in the structure. Microcrack detection is accomplished by processing received waveforms generated with a pitch-catch transducer configuration. The second method, coda-wave interferometry, measures the velocity variation at the tail end …

Quantification Of The State Of Practice Of Offsite Construction And Related Technologies: Current Trends And Future Prospects, Rayan H. Assaad, Islam H. El-Adaway, Makarand Hastak, Kim Lascola Needy

Civil, Architectural and Environmental Engineering Faculty Research & Creative Works

Although some researchers and practitioners have perceived that the current reliance on offsite construction methods is high, other studies have hypothesized that the use of offsite construction techniques is still considered to be somehow limited. To this end, this paper aims to quantify the state of practice of offsite construction in terms of current trends and future prospects for the overall industry as well as the following main sectors: industrial, building and commercial, and infrastructure. First, a questionnaire was formed, pilot-tested, distributed, and completed by 100 construction practitioners. Second, the questionnaire's internal and external validity and reliability were examined using …

Lab-Scale Data And Microbial Community Structure Suggest Shortcut Nitrogen Removal As The Predominant Nitrogen Removal Mechanism In Post-Aerobic Digestion (Pad), Fabrizio Sabba, Patrick J. Mcnamara, Eric Redmond, Mike Young, Leon Downing

Civil and Environmental Engineering Faculty Research and Publications

Implementing an aerobic digestion step after anaerobic digestion, referred to as “post aerobic digestion” (PAD), can remove ammonia without the need for an external carbon source and destroy volatile solids. While this process has been documented at the lab-scale and full-scale, the mechanism for N removal and the corresponding microbial community that carries out this process have not been established. This research gap is important to fill because the nitrogen removal pathway has implications on aeration requirements and carbon demand, that is, short-cut N-removal requires less oxygen and carbon than simultaneous nitrification–denitrification. The aims of this research were to (i) …

Oxidized Graphitic Nano-Amendment Of Cement Composites: Exploring Truly Low Concentrations And Novel Particle Morphologies, Shohana Iffat

Theses and Dissertations

Oxidized graphitic nanoparticles such as multiwalled carbon nanotubes (MWCNTs) and graphene nanoplatelets (GNPs), can produce enhancements in physicomechanical properties of cement composites that are relevant to structural and durability performance, provided that said nanoparticles are well dispersed in the composite. Lower-bound MWCNT concentrations are reported in the literature in the range 0.01-0.05% in weight of cement (wt%). Such concentrations may not be costeffective for practical applications and may also be excessive since they would result in a nanoparticle surface area at or above 105 m2 for 1 m3 of cement paste, or 104.5 m2 for 1 m 3 of concrete, …

Changes In Drought Characteristics Under Future Climate Projections, Diogo Stalin De Alcantara Araujo

Theses and Dissertations

Accumulating evidence on the impact of climate change on droughts, highlight the necessity for developing effective adaptation and mitigation strategies. Global Drought Layers were developed for historic and future runs of nine global climate models (GCM) of the Coupled Model Intercomparison Model 6th phase (CMIP6). Relative changes of drought characteristics were estimated, and hotspots were identified, especially in South America, Africa, Europe, Western USA, and Australia. Further, changes in future drought risk and severity in Australia are quantified. Historic conditions (1981-2014) and projections for mid-century (2015-2050) and end-century (2051-2100) from four shared socioeconomic pathways (SSP1-2.6, SSP2-4.5, SSP3-7.0 and SSP5-8.5) are …

Circular Reinforced Concrete Columns Damaged By Fire And Retrofitted With Cfrp And Steel Jacketing, Jia Xu

Dissertations - ALL

In recent decades, the post-fire behavior of reinforced concrete (RC) columns with normal and high-strength concrete has become an important research topic. Numerous studies have demonstrated that RC columns exhibit good fire resistance owing to the thermal properties of concrete. Therefore, reinforced concrete structures rarely collapse within a finite fire duration and can be successfully repaired. Along with the increasing number of skyscrapers, high-strength concrete (HSC) has played an equally important role as normal-strength concrete (NSC) in the industry. In this study, the thermal behavior of RC columns with NSC and HSC exposed to ISO 834 standard fire for various …

Data-Driven Prioritization And Empirical Predictions For Bridge Scour In Nebraska, Awgku Ahmad Hashim Awg Bolhasan

Department of Civil and Environmental Engineering: Dissertations, Theses, and Student Research

The effect of scour at the bridge substructure results in an increase in the vulnerability of the overall bridge stability. Previous studies have found that current guidelines are often overly-conservative with respect to scour. This project aims to provide guidance on hydraulic modeling parameters and reasonable scour estimates specific to Nebraska conditions. This will enable engineers to assess bridge sites for scour more precisely for efficient and effective design and countermeasures.

Four sites were surveyed for scour changes between the period of December 9, 2020, to April 20, 2021. At these four sites, overland and bathymetry survey data were collected. …

Dlr Covid-19 Mobility Review - Coastal Mobility Route (Ph1b): Mobility Update, Sarah Rock Dr, Dave O'Connor, Michael Banim

Reports

The Phase 1b study is a follow up to the evaluation and review of the Phase 1 'Covid-19 Mobility and Public Realm Works' undertaken by Dun Laoghaire- Rathdown County Council in 2020, which included the development of the Coastal Mobility Route (new cycle infrastructure). These works were part of the Council's response to some of the urban and transport planning challenges associated with Covid-19.

This study reports on ongoing monitoring and evaluation of the changing mobility patterns in the region of the Coastal Mobility Route throughout 2021 and 2022, as government and societal responses to the Covid-19 pandemic changed and …

Prefabrication And Modular Construction: Cm 214 Residential Construction Learning Module, Matthew V. Keeth

Construction Management

The residential construction industry in the United States has certainly stuck to the conventional methods of stick-built construction nationwide. What if there was a better way? This project seeks to educate future Construction Management students about a smarter, more efficient, and sustainable method of homebuilding: Modular Construction. Distinguishing the difference between prefabrication and modularization is a necessary standard. Prefabrication is defined as the process of manufacturing the essential structural components of a home at a factory off-site. The large scale structural components of a home are then transported to the jobsite for easy installation. In addition, Modular Construction is defined …

Connected Simulation For Work Zone Safety Application, Vahid Balali

Mineta Transportation Institute

Every year, over 60,000 work zone crashes are reported in the United States (FHWA 2016). Such work zone crashes have resulted in over 4,400 fatal and 200,000 non-fatal injuries in the last 5 years (FHWA 2016, BLS 2014). Apart from the physical and emotional trauma, the annual cost of these injuries exceeds $4 million-representing significant wasted resources. To improve work zone safety, this research developed a system architecture for unveiling high-risk behavioral patterns among highway workers, equipment operators, and drivers within dynamic highway work zones. This research implemented the use of a connected virtual environment, which is an immersive hyper-realistic …

Manual For Asphalt Pavement Repair And Resurfacing Preparation, Dingxin Cheng, Gary Hicks, Roger D. Smith

Mineta Transportation Institute

Timely repairs of pavement defects are essential in protecting an important investment and asset that public agencies have. These repairs may be made as durable “stand-alone” repairs of isolated problems, or as part of preparations for a total resurfacing. This manual provides basic information on the planning, materials and construction aspects of common pavement repairs such as crack sealing, crack filling, and patching, as well as a broader look at other preparations needed for total resurfacing a pavement, whether the resurfacing is a surface treatment or a thin hot mix asphalt (HMA) overlay.

Managing The Curb: Understanding The Impacts Of On-Demand Mobility On Public Transit, Micromobility, And Pedestrians, Susan Shaheen, Elliot Martin, Adam Cohen, Jacquelyn Broader, Richard Davis

Mineta Transportation Institute

In recent years, innovative mobility and shifts in travel and consumption behavior are changing how people access and use the curb. Shared mobility—the shared use of a vehicle, bicycle, scooter, or other mode—coupled with outdoor dining, curbside pick-up, and robotic delivery are creating new needs related to the planning, management, and enforcement of curb access. This study examines curb planning and management from several angles, such as safety, social equity, and multimodal connections. This research employs a multi-method approach to identify the changing needs for curb space management and how to meet these needs through new planning and implementation policies …

Building Services Engineering July/August 2022

Building Services Engineering

No abstract provided.

Life Cycle Cost Analysis Of High Friction Surface Treatment Applications, Eslam Deef-Allah, Korrenn Broaddus, Magdy Abdelrahman

Civil, Architectural and Environmental Engineering Faculty Research & Creative Works

Life cycle cost analyses for high friction surface treatment (HFST) applications were executed relying on a Microsoft Excel program developed by the researchers. Calcined bauxite (CB), five CB alternatives, and epoxy binder were utilized in the HFST applications. The aggregates' performances were evaluated through the aggregate image measurement system (AIMS) before and after Micro-Deval polishing. The performance of the HFST applications was evaluated by the dynamic friction tester (DFT) and British pendulum (BP). The major purpose of this program was to present a rational method for converting different input data (project and material specifics) to comparable output data (net present …

The Impact Of Offsite Construction On The Workforce: Required Skillset And Prioritization Of Training Needs, Rayan H. Assaad, Islam H. El-Adaway, Makarand Hastak, Kim Lascola Needy

Civil, Architectural and Environmental Engineering Faculty Research & Creative Works

Offsite construction has showed great potential in addressing many of the industry's problems. While multiple research efforts have been directed at examining different offsite construction aspects, few studies investigated the workforce-related aspects. Therefore, this study aims to address this knowledge gap by examining the impact of offsite construction on the workforce, as represented by the following five workforce categories: offsite, onsite, engineering and design, construction and fabrication, and administrative workforce. To this end, this paper (1) determined the impact of offsite construction on the skillset (reskilling or upskilling) and the demand (shrink or growth) for the offsite and onsite construction …