Engineering Commons^™

Predictions Of Household Water Affordability Under Conditions Of Climate Change, Demographic Growth, And Fresh Groundwater Depletion In A Southwest Us City Indicate Increasing Burdens On The Poor, Josiah M. Heyman, Alex S. Mayer, Jessica Alger

Michigan Tech Publications, Part 1

Reduced river flows and groundwater depletion as a result of climate change and population growth have increased the effort and difficulty accessing and processing water. In turn, residential water costs from municipal utilities are predicted to rise to unaffordable rates for poor residential water customers. Building on a regional conjunctive use model with future climate scenarios and 50-year future water supply plans, our study communicates the effects of climate change on poor people in El Paso, Texas, as water becomes more difficult and expensive to obtain in future years. Four scenarios for future water supply and future water costs were …

Quantifying A 21-Year Surface Water And Groundwater Interaction In A Ridge And Valley Lake Environment Using A Highly Constrained Modeling Approach, Richard T. Bowers Jr.

USF Tampa Graduate Theses and Dissertations

Karst lakes are ubiquitous in ridge terrain settings in limestone aquifer coastal plain environments. In west-central Florida, these lakes are frequently connected to the Upper Floridan aquifer and have unique aquifer recharge characteristics. They have been selectively studied because they commonly have no or very limited surface water discharge and limited drainage areas, have appreciable surface water and groundwater interaction and leak to the deep aquifer. An innovative modeling approach was developed to collectively understand and more precisely quantify this vertical leakage, both from a lake-specific and regional water budget standpoint, for a 21-year study period (2000-2020). A unique, calibrated …

The Impact Of Murals On Traffic Safety: A Behavior And Crash Analysis, Maria Cecelia Cruz

Civil Engineering ETDs

ABSTRACT

This research analyzed changes in motor vehicle volumes and motor vehicle speeds after the installation of an intersection mural in Albuquerque, NM and changes in crash frequency after mural installations in Philadelphia, PA. Data was collected manually on site for the Albuquerque study and secondary data – including installation dates and physical characteristics – were used for the Philadelphia crash analyses. Statistics were computed to determine trends in motor vehicle speeds and volumes relative to the Albuquerque mural installation. A geographic information system (GIS) spatial analysis and t-test statistical analyses were used to determine which Philadelphia murals saw significant …

Techno-Economic Analysis Of Atmospheric Water Harvesting Across Climates, Natalie Gayoso

Civil Engineering ETDs

Drinking water scarcity is a global challenge as ground water and surface water availability diminishes. The atmosphere is an alternative freshwater reservoir that has universal availability and an abundance of water within the air. This makes the atmosphere a great source to capture drinking water. In order to effectively perform Atmospheric Water Harvesting (AWH) we need to 1) understand how different climate regions (e.g., arid, temperate, and tropical) drive the amount of water being produced, and 2) determine the cost to purchase, operate, and power AWH. This research pairs thermodynamics with Techno-Economic Analysis, a method of analyzing the economic performance …

Secure Cloud-Based Iot Water Quality Gathering For Analysis And Visualization, Soin Abdoul Kassif Baba M Traore, Maria Valero, Amy Gruss

KSU Proceedings on Cybersecurity Education, Research and Practice

Water quality refers to measurable water characteristics, including chemical, biological, physical, and radiological characteristics usually relative to human needs. Dumping waste and untreated sewage is the reason for water pollution and several diseases to the living hood. The quality of water can also have a significant impact on animals and plant ecosystems. Therefore, keeping track of water quality is a substantial national interest. Much research has been done for measuring water quality using sensors to prevent water pollution. In summary, those systems are built based on online and reagent-free water monitoring SCADA systems in wired networks. However, centralized servers, transmission …

Optimizing Lake Okeechobee Watershed Management And Reservoir Operations For Water Quality Improvement, Osama Mahrous Mossad Tarabih

USF Tampa Graduate Theses and Dissertations

Rivers around the globe have been altered as people have constructed water resources infrastructure to store water for different human needs, causing negative impacts on ecosystem processes and functions. Environmental flows have been introduced to restore deteriorated riverine ecosystems; however, environmental flows have not always been practical or adequate to restore environment conditions in rivers globally. Lake Okeechobee is a large subtropical lake that plays a pivotal role in South Florida water system providing various water demands for the surrounding communities as well as providing crucial services to the ecosystem of South Florida. However, hydrologic alterations and nutrient (phosphorus and …

Numerical Investigation Of Heat Generation And Accumulation Contributing To Elevated Temperature In Msw Landfills, Alborz Fathinezhad

LSU Doctoral Dissertations

Landfills are complex geostructures which contains organic and inorganic municipal, and in some cases industrial, wastes and are expected to remain operational for long times. Due to the complex nature of physical, chemical, biological, and thermal reactions that carry on within the depths of a landfill, unexpected incidents such as elevated temperatures could become inevitable. While uncommon to happen, elevated temperatures cause health and environmental issues such as odors, rapid settlements, slope instabilities. In addition, elevated temperatures can negatively impact engineered components in composite bottom liners, cover systems, leachate collection, and gas extraction and recovery systems.

Air intrusion into municipal …

Canopycam – An Edge-Computing Sensing Unit For Continuous Measurement Of Canopy Cover Percentage Of Dry Edible Beans, Wei-Zhen Liang, Joseph Oboamah, Xin Qiao, Yufeng Ge, Robert M. Harveson, Daran Rudnick, Jun Wang, Haishun Yang, Angie Gradiz

Department of Agricultural and Biological Systems Engineering: Faculty Publications

Canopy cover (CC) is an important indicator for crop development. Currently, CC can be estimated indirectly by measuring leaf area index (LAI) using commercially available hand-held meters. However, it does not capture the dynamics of CC. Continuous CC monitoring is essential for dry edible beans production since it can affect crop water use, weed, and disease control. It also helps growers to closely monitor “yellowness”, or senescence of dry beans to decide proper irrigation cutoff timing to allow the crop to dry down for harvest. Therefore, the goal of this study was to develop a device – CanopyCAM, containing software …

G-Dam: A Distributed Data Storage With Blockchain Framework For Management Of Groundwater Quality Data, Sukrutha L. T. Vangipuram, Saraju P. Mohanty, Elias Kougianos, Chittaranjan Ray

Department of Civil and Environmental Engineering: Faculty Publications

Groundwater overuse in different domains will eventually lead to global freshwater scarcity. To meet the anticipated demands, many governments worldwide are employing innovative and traditional techniques for forecasting groundwater availability by conducting research and studies. One challenging step for this type of study is collecting groundwater data from different sites and securely sending it to the nearby edges without exposure to hacking and data tampering. In the current paper, we send raw data formats from the Internet of Things to the Distributed Data Storage (DDS) and Blockchain (BC) edges. We use a distributed and decentralized architecture to store the statistics, …

Corrosion Performance Of Carbon And Galvanized Steel In Calcium Silicate Cement, Maria Cardoso

USF Tampa Graduate Theses and Dissertations

The concrete manufacturing industry has faced challenges with reducing carbon dioxide emissions as it currently produces about 8% of the world’s anthropogenic carbon dioxide emissions. With global atmospheric carbon dioxide concentrations being higher than ever, the solution is urgent. Due to this, a more sustainable type of concrete has been proposed.Calcium silicate cement (CSC) composed of essentially the same raw materials as ordinary portland cement (OPC) cures through the consumption of carbon dioxide rather than hydration like OPC. CSC is being explored as a potential alternative to OPC, however, there is little to no information on its corrosion related durability. …

Spatiotemporal Metabolic Network Models Reveal Complex Autotroph-Heterotroph Biofilm Interactions Governed By Photon Incidences, Poonam Phalak, Hans C. Bernstein, Stephen R. Lindemann, Ryan S. Renslow, Dennis G. Thomas, Michael A. Henson, Hyun-Seob Song

Department of Agricultural and Biological Systems Engineering: Faculty Publications

Autotroph-heterotroph interactions are ubiquitous in natural environment and play a key role in controlling various essential ecosystem functions, such as production and utilization of organic matter, cycling of nitrogen, sulfur, and other chemical elements. Understanding how these biofilm metabolic interactions are constrained in space and time remains challenging because fully predictive models designed for this purpose are currently limited. Toward filling this gap, here we developed community metabolic network models for two autotroph-heterotroph biofilm consortia (termed UCC-A and UCC-O), which share a suite of common heterotrophic members but have a single distinct photoautotrophic cyanobacterium (Phormidesmis priestleyi str. ANA and …

Behavior Of Concrete Reinforced With Date Palm Fibers, Elias Ali

Faculty Scholarship

In recent decades, researchers have begun to investigate innovative sustainable construction materials for the development of greener and more environmentally friendly infrastructures. The main purpose of this article is to investigate the possibility of employing date palm tree waste as a natural fiber alternative for conventional steel and polypropylene fibers (PPFs) in concrete. Date palm fibers are a common agricultural waste in Middle Eastern nations, particularly Saudi Arabia. As a result, this research examined the engineering properties of high‐strength concrete using date palm fibers, as well as the performance of traditional steel and PPF concrete. The concrete samples were made …

Statistical Models Of Traffic Injury Severities: The Effects Of Driver Nationality And The Time-Of-Day On Pedestrian Injuries, Asim Alogaili

USF Tampa Graduate Theses and Dissertations

Roadway accidents have long been a major cause of casualties among all roadway users including drivers and pedestrians. Researchers have used various advanced methodologies to precisely identify affecting factors to help policy makers implement safety measures that effectively mitigate such losses. For a variety of reasons such factors, especially those related to roadway users, are subject to constant changes over time. This work investigates, in depth, the effect of multiple variables on the injury severity levels of both drivers and pedestrians using the most recent and advanced methodological approaches.

First, the dissertation starts by investigating factors that significantly contribute to …

Phytoextraction Of Lead (Pb) Contaminated Soil By Switchgrass (Panicum Virgatum L): Impact Of Bap And Nta Applications, Genna Hart, Austin Gilly, Marina Koether, Thomas Mcelroy, Sigurdur Greipsson

Faculty Articles

The accumulation of Pb deposits in soil is a growing global concern. Soil remediation options include phytoextraction that involves the use of plants and associated soil microorganism. Switchgrass (Panicum virgatum L.), a second-generation bioenergy crop was used in this study due to its ability to produce high biomass and grow in metal polluted soils. Plants were grown in Pb-contaminated soil (5,802.5 mg kg−1) in an environmentally controlled greenhouse. Plants were treated with exogenous application of the plant growth regulator (PGR) benzylaminopurine (BAP) or complete foliar nutrient solution (Triple-12®) twice a week until harvested. Plants also received the soil fungicide propiconazole …

Comparison Study Of Consumer’S Perception Toward Urban Air Mobility In The United States And Rest Of The World Using Social Media Information, S M Toki Tahmid

USF Tampa Graduate Theses and Dissertations

Urban Air Mobility (UAM) is a wide concept that will enable access to on-demand air mobility, cargo delivery, medical applications, and emergency services that is run through a connected and integrated transportation system. This study aims to investigate social media data to compare the major topics discussed in the United States and rest of the world and perform a sentiment analysis to see if the comments are positive, negative, or neutral. Twitter was the primary source of information that was used in this thesis, as it is a place where people interact, create, and share information and ideas online. In …

Chapter 6: Hydraulic Grade Line (Hgl) And Energy Grade Line (Egl), Donald V. Chase

Open Educational Resource: Civil Engineering Course Notes

No abstract provided.

Intelligent Control Of Groundwater In Slopes With Deep Reinforcement Learning †, Aynaz Biniyaz, Behnam Azmoon, Zhen (Leo) Liu

Michigan Tech Publications, Part 1

The occurrence of landslides has been increasing in recent years due to intense and prolonged rainfall events. Lowering the groundwater in natural and man-made slopes can help to mitigate the hazards. Subsurface drainage systems equipped with pumps have traditionally been regarded as a temporary remedy for lowering the groundwater in geosystems, whereas long-term usage of pumping-based techniques is uncommon due to the associated high operational costs in labor and energy. This study investigates the intelligent control of groundwater in slopes enabled by deep reinforcement learning (DRL), a subfield of machine learning for automated decision-making. The purpose is to develop an …

Toward A Safer Transportation System For Senior Road Users, Saba Doulabi

LSU Doctoral Dissertations

Senior pedestrians and drivers (65 years and older) are among the most vulnerable road users. As the population of seniors rise, concerns regarding older adults' traffic safety are growing. The advantages of using autonomous vehicles, innovative vehicle technologies, and active transportation are becoming more widely recognized to improve seniors' mobility and safety. This behooves researchers to further investigate senior road users’ safety challenges and countermeasures. This study contributes to the literature by achieving two main goals. First, to explore contributing factors affecting the safety of older pedestrians and drivers in the current transportation system. Second, to examine seniors’ perceptions, preferences, …

Geospatial Analysis Of Impact On Evacuation Routes And Urban Areas In South Texas Due To Flood Events, Layda B. Spor Leal, Jungseok Ho, Sara E. Davila

Civil Engineering Faculty Publications

The Lower Rio Grande Valley has historically faced a variety of hurricanes and tropical storms that have led to sever flooding. As a consequence, waves of mass evacuation of the local population with the means of transportation occur frequently. While evacuation is encouraged in some cases of disaster, the routing is not always available as water takes to roads and drainage capacities are overwhelmed. In order to dissert the most appropriate evacuation routes, it is necessary to analyze the areas that will be affected in the future based on urban locations, elevation, and historical information. This project utilizes a semi-coupled …

Interactive Industrial Energy Assessment Learning Platform Using 360-Degree Virtual Reality Contents, Laleh Ghanbari

LSU Doctoral Dissertations

The traditional passive industrial energy assessment training methods included low direct involvement of students, and they lacked an engaging learning environment. Since the main task for energy assessment is visual inspection and data collection, traditional passive training methods were not able to provide hands-on experience for the students. An active training method was needed to make the current industrial energy assessment training more efficient and effective, a method which provides the opportunity for students to have more interaction with the training environment. In this study, an interactive industrial energy assessment learning platform using 360ᵒ virtual reality contents was developed. The …

Home With Hope: Green Infrastructure Eee 495: Urban Water Projects, Madeline Mcintosh, Victoria Chillscyzn

Purdue Journal of Service-Learning and International Engagement

Urban landscapes have serious impacts on water quality through the disruption of the hydrologic cycle. The Purdue University course, Environmental and Ecological Engineering 49500: Urban Water Projects, seeks to use student-led service-learning projects to improve both water quality and quantity in the Wabash River water-shed. This year, students investigated and implemented strategies to guarantee that previous implementations succeed well into the future. Two students, Victoria Chillscyzn and Madeline McIntosh, were part of a team

working with the local nonprofit Home with Hope. Through interviews, a survey, and site visits, the team determined action items to improve the form and function …

Investigation On Enhancement Of Seismic Performance Of Unreinforced Masonry Structures, Susanta Banerjee Dr.

Technical Collection

Earthquake causes a huge loss of life and property compared to other natural disasters. Almost 75% of the casualties due to earthquake were caused due to the collapse of the building and the substantial portion was from the collapse of the unreinforced masonry (URM) buildings. However, masonry is still more popular than other construction materials due to its lower cost and availability of material, and construction of URM does not need any technical rigor. The extent of vulnerability in masonry structures is high due to its brittle nature of the failure. Primarily, URM building is designed to withstand vertical loads, …

The Impact Of Biofilms And Dissolved Organic Matter On The Transport Of Nanoparticles In Field-Scale Streams, Junyeol Kim, Kevin R. Roche, Diogo Bolster, Kyle Doudrick

Civil Engineering Faculty Publications and Presentations

The fate and transport of nanoparticles (NPs) in streams is critical for understanding their overall environmental impact. Using a unique field-scale stream at the Notre Dame-Linked Experimental Ecosystem Facility, we investigated the impact of biofilms and the presence of dissolved organic matter (DOM) on the transport of titanium dioxide (TiO₂) NPs. Experimental breakthrough curves were analyzed using temporal moments and fit using a mobile-immobile model. The presence of biofilms in the stream severely reduced the transport of the TiO₂ NPs, but this was mitigated by the presence of DOM. Under minimal biofilm conditions, the presence of DOM …

Pile-Supported Wharves Subjected To Inertial Loads And Lateral Ground Deformations. Ii: Guidelines For Equivalent Static Analysis, Milad Souri, Arash Khosravifar, Stephen E. Dickenson, Scott Schlechter, Nason Mccullough

Civil and Environmental Engineering Faculty Publications and Presentations

An equivalent static analysis (ESA) procedure is proposed for the design of pile-supported wharves subjected to combined inertial and kinematic loads during earthquakes. The accuracy of the ESA procedure was evaluated against measurements from five large-scale centrifuge tests. The wharf structures in these tests were subjected to a suite of recorded ground motions and the associated superstructure inertia, as well as earthquake-induced slope deformations of varying magnitudes. It is shown that large bending moments at depths greater than 10 pile diameters were primarily induced by kinematic demands and can be estimated by applying soil displacements only (i.e., 100% kinematic). In …

Pile-Supported Wharves Subjected To Inertial Loads And Lateral Ground Deformations. I: Experimental Results From Centrifuge Tests, Milad Souri, Arash Khosravifar, Stephen E. Dickenson, Scott Schlechter, Nason Mccullough

Civil and Environmental Engineering Faculty Publications and Presentations

Five dynamic, large-scale centrifuge tests on pile-supported wharves were used to investigate the time- and depth-dependent nature of kinematic and inertial demands on the deep foundations during earthquake loading. The wharf structures in the physical experiments were subjected to a suite of recorded ground motions and imposed superstructure inertial demands on the piles. Partial to full liquefaction in loose sand resulted in slope deformations of varying magnitudes that imposed kinematic demands on the piles. It was found that the wharf inertia and soil displacements were always in phase during the critical cycle when bending moments were at their maximum values. …

Rebar-Free 3d Printing Of Transportation Infrastructure, Ali Kazemian, Marwa Hassan, Hassan Noorvand, Gabriel Arce, Hassan Ahmed, Ilerioluwa Giwa

Data

This study investigates the fresh and hardened-state properties of printing mixtures including different dosages of steel fibers, especially at higher dosages which have not been investigated before. This study also considers the effects of other parameters such as sand-to-powder ratio and the limestone content on the properties of steel fiber reinforced printing materials, to reduce the Portland cement content which has a high carbon footprint. The obtained experimental results revealed that high-performance materials incorporating up to 2.5% steel fibers (by volume) can be successfully 3D printed. The mechanical properties of the reinforced mixtures improved significantly at high fiber dosages (2% …

Low-Cost Sustainable Engineered Geopolymer Composites (Egcs) For Repair And New Construction Of Transportation Infrastructure, Hassan Noorvand, Marwa Hassan, Miladin Radovic, Svetlana Sukhishvili, Gabriel Arce, Ruwa Abufarsakh, Adriana A. Alvarado, Oscar Huang, Sang Zhen

Data

This study evaluated the use of cost-effective alternative materials in the formulation of novel low-cost Engineered Geopolymer Composite (EGC) materials for repair and new construction of transportation infrastructure in Region 6. Previous studies and reports have shown that EGCs have excellent mechanical properties, which makes them an eco-friendly and more sustainable alternative to Engineered Cementitious Composites (ECCs). However, the mass adoption of these emerging composites is expected to be hindered by their cost, which is mainly driven by the use of PVA reinforcing fibers, silica fume (SF), and manufactured microsilica sand (MS). To address this key shortcoming, novel low-cost EGC …

Development Of Robotics & Automation Roadmap For Road Construction/Maintenance Projects, Ashrant Aryal, Chao Wang, Chintan Vijay Vora, Sueed A. Willoughby

Data

Over the past few decades, there have been no significant improvements in the construction industry's productivity. Outside the construction industry, robots have proven to be beneficial in improving productivity, safety, and quality. There is a growing interest in adopting robots in the construction industry to address these issues. As robots get introduced to the project sites, human-robot interaction becomes an important consideration for wide-scale adoption. The success of deploying robots in the construction industry depends on how well humans collaborate with the robots. This project focused on investigating the perception of various construction industry stakeholders in adopting robots in their …

Rebar-Free 3d Printing Of Transportation Infrastructure, Ali Kazemian, Marwa Hassan, Hassan Noorvand, Gabriel Arce, Hassan Ahmed, Ilerioluwa Giwa

Publications

This study investigates the fresh and hardened-state properties of printing mixtures including different dosages of steel fibers, especially at higher dosages which have not been investigated before. This study also considers the effects of other parameters such as sand-to-powder ratio and the limestone content on the properties of steel fiber reinforced printing materials, to reduce the Portland cement content which has a high carbon footprint. The obtained experimental results revealed that high-performance materials incorporating up to 2.5% steel fibers (by volume) can be successfully 3D printed. The mechanical properties of the reinforced mixtures improved significantly at high fiber dosages (2% …

Resilient 3d-Printed Civil Infrastructure With Ultra-High Performance Engineered Cementitious Composites (Uhpeccs), Hassan Noorvand, Marwa Hassan, Ali Kazemian, Gabriel Andres Arce Amador, Daniel E. Game

Publications

This study aims to develop and evaluate UHP-ECC materials for 3DP applications. To achieve this, the rheological properties of the cementitious composites were designed to accommodate 3DP functionality. Additionally, this study aimed to evaluate the hardened properties of the 3D-printed UHP-ECCs and compare them to the cast UHP-ECCs. Furthermore, the effect of variables such as sand-to-binder (S/B), fly ash-to-cement ratio (FA/C), and high-range water reducer (HRWR) content on the fresh and hardened properties of the 3D printable mixtures were evaluated. Fresh properties of mixtures were assessed by means of the flowability test, setting time test, and printability test. Hardened properties …