Engineering Commons^™

Risks Involved With Helicopter Operations On A Remote Jobsite, Noah Hohenester

Construction Management

Running a jobsite in a remote location adds unpredictable challenges and such experience is difficult to find. In mountainous terrain where road access is limited, the most efficient way to transport materials from the laydown yard to the jobsite is with a helicopter and a longline. Having an active helicopter on site comes with many detailed plans and preparations for safety risks, emergency evacuations, and lifting procedures. Many variables must be accounted for when getting a helicopter usage plan approved, and everyone in the field must be trained appropriately for any potential hazards. Projects like these are unique and many …

Rainwater Catchment System Designed For California Polytechnic State University Building 34, Jonah S. Aere

Construction Management

California Polytechnic State University currently receives its water supply from either Whale Rock Reservoir, for distilled water, or pumped from six ground wells, for agricultural use. Although the university’s Agricultural College requires a certain amount of water to grow crops, these demands are often not met due to the lack of water within these underground wells. A rainwater capture system could be constructed to ease the water supply burden which is already depleting, reduce wasted drainage, and maintain a sustainable agricultural water source without being dependent on other locations. This would benefit the institution by reducing imported water thereby saving …

Project Selection In Facility And Infrastructure Maintenance Organizations, Bayram M. Kurbanov

Theses and Dissertations

The current Air Force Civil Engineer Center (AFCEC) built infrastructure Facility Sustainment Restoration and Modernization (FSRM) portfolio management methodology results in an unbalanced project portfolio. The consequence of this unbalance is that majority of the funding goes towards buildings on the flightline and Facility Support Services activities do not get adequate funding which leads to further deterioration of those facilities. This research investigates whether decision support framework based on Value-Focused Thinking (VFT) process yields better project selection outcomes for facility and infrastructure maintenance organizations. To accomplish that, the investigation focuses on understanding current AFCEC decision support methodology, building an alternative …

Scan4façade: Automated As-Is Façade Modeling Of Historic High-Rise Buildings Using Drones And Ai, Yuhan Jiang, Sisi Han, Yong Bai

Civil and Environmental Engineering Faculty Research and Publications

This paper presents an automated as-is façade modeling method for existing and historic high-rise buildings, named Scan4Façade. To begin with, a camera drone with a spiral path is employed to capture building exterior images, and photogrammetry is used to conduct three-dimensional (3D) reconstruction and create mesh models for the scanned building façades. High-resolution façade orthoimages are then generated from mesh models and pixelwise segmented by an artificial intelligence (AI) model named U-net. A combined data augmentation strategy, including random flipping, rotation, resizing, perspective transformation, and color adjustment, is proposed for model training with a limited number of labels. As …

Development Of An Excel Model To Evaluate The Stability Of Slopes, Bradley Davis

All Graduate Plan B and other Reports, Spring 1920 to Spring 2023

This objective of this study is to determine a method or tool for taking given slope stability parameters and quickly and effectively determining the factor of safety against sliding of fully softened slopes. This study evaluates the effects of soil and geometric parameters of common slopes, and models these properties in a hypothetical model. The methodology is based on a parametric analysis using the Spencer’s Method of Slices limit equilibrium analysis used in the computer program Slide2. A parametric analysis is performed to determine which soil and/or geometric properties have a high influence on slope stability. The parametric analysis is …

Deicer Salt-Scaling Resistance Of Concrete Using Recycled Concrete Aggregates Pretreated By Silica Fume Slurry, Hossein Sasanipour, Farhad Aslani, Javad Taherinezhad

Research outputs 2022 to 2026

Highlights: - Salt-scaling resistance in the presence of recycled concrete aggregates, - A strong bond between RCAs and new mortar was obtained after a freeze-thaw test, - Pulse velocity after exposure to freezing-thawing cycles negligibly decreased, - The scaling rate increased with the increase in the water–cement ratio, - The electrical resistivity of concrete after exposure to cycles has been investigated. Concrete wastes such as recycled concrete aggregates (RCA) make up a significant part of construction and demolition waste (C&DW) which can be used to minimize usage of natural aggregates and reduce carbon footprint. This paper studies the salt-scaling resistance …

Improving Tc Drill Bit's Efficiency And Resistance To Wear By Graphene Coating, Reza Taheri, Mohsen Jalali, Ahmed Al-Yaseri, George Yabesh

Research outputs 2022 to 2026

Displaying a two-dimensional pure crystal carbon structure, Graphene is the strongest, yet thinnest substance discovered by scientists. Coating tungsten carbide (TC) drill bits with graphene to evaluate the effect of graphene on the wear, as well as the rate of penetration of the drilling bit was examined in this research. Two evaluation approaches were employed: one with employing ANSYS Software and the second by employing atomic pressure chemical vapor deposition (APCVD synthesis) in the laboratory to produce a monolayer graphene coating. The simultaneous software-based and lab-based testing were performed to increase the credibility of the results and minimize the potential …

The Influence Of Acidizing On Propped Fractures For Productivity Enhancement: Eagle Ford Laboratory Study, Mohsen Farrokhrouz, Abbas Taheri, Stefan Iglauer, Alireza Keshavarz

Research outputs 2022 to 2026

Hydraulic fracturing of tight formations and placing proppants within induced fractures are commonly performed in unconventional shale reservoirs all over the world, especially in North America. However, the overall recovery of these oil and gas resources is very low and hence, production enhancement is inevitable. This study investigated the acidizing of propped fractures as a recovery enhancement method in Eagle Ford shale samples. Experiments were designed using sample slabs having proppants between them. Differing parameters were examined to optimize the fracture conductivity through acidizing. For a range of confining pressures, the fracture conductivity was maximized by minimizing the proppant embedment. …

Energy Dissipation Of Highly Convergent Chutes In Stilling Basins Of Concrete Dams, Rafael Morán, Miguel Ángel Toledo, Jaime I. Masides

Protections Conference

This article presents the results of a combination of experimental and numerical research on the performance of stilling basins of spillways with highly convergent chutes (HCC). The comparison between the energy dissipation of the stilling basins with flat slab and baffle blocks shows that the latest are more efficient. Because of that, the cost savings of using such blocks can be significant. The results obtained could be applied in different cases such as increasing the capacity of existing spillways and protecting dams against overtopping. The application of HCC spillways in new dams could lead to a reduction in the cost …

A Novel Computational Method To Compute Rock Scour Due To Dam Overtopping, Erik F. R. Bollaert

Protections Conference

Flood events generating potential risk for dam overtopping may become more frequently in the future, especially because of increasing climate change. Crest overflows at arch dams generally impact the downstream rock mass very close to the dam foundation. As such, any scour of the rock mass generated by this phenomenon may potentially endanger the stability of the dam and its appurtenant structures. Hence, pertinent assessment of this scour formation through space and time is becoming increasingly relevant to dam safety. This paper presents a novel computational method for detachment of prismatic rock blocks from their mass when impacted by high-velocity …

Bedrock Erosion In Swedish Spillways - A Methodology For Assessing Design Pore Pressures Aimed For Design Of Erosion Mitigation Via Reinforcement Of The Rock Mass, Per Eriksson, Jonas Persson, Carol-Oscar Nilsson

Protections Conference

This article presents a collection of literature and data that enables calculations of hydraulic pressures inside a structurally simplified rock mass. The causation between the pressure in the rock mass and the near plane-parallel turbulently flowing waters on natural surfaces of igneous rock is expressed. The article is mainly aimed at rock reinforcement calculations given magmatic rock types with high durability and large block size.

Erodibility Evaluation Of An Unlined Rock Spillway: Comparison Between The Erodibility Index Method And A New Method Based On Block Theory, Michael George, Cole Christiansen, Ariel Rickel, Benjamin Israel, George W. Annandale

Protections Conference

Following the 2017 events at the Oroville Dam spillways that prompted evacuation of nearly 200,000 downstream residents and resulted in over $1B USD repair costs, there is highlighted focus on evaluation of spillways (both lined and unlined) at dams across the USA. In the case of unlined channels, flow conditions are often complex which presents several challenges for erodibility evaluation given methods are often based on idealized circumstances. High-resolution data available for the site (both in terms of 3D point cloud geometry data for the rock mass and 3D CFD model simulations of flow conditions) permitted a more detailed analysis …

Hydro-Geotechnical Rock Scour Assessment At Petit-Saut Dam, Seven E. Pells, Fanar Al-Qassab, Felicia Weir, Anaïs Faivre, Thierry Leturcq, Benoit Blancher

Protections Conference

This paper presents a recommended design procedure for assessment of rock scour which is illustrated for the case study of Petit-Saut Dam in French Guiana. The methodology, referred to as a “hydro-geotechnical scour assessment”, promotes a multi-discipline approach, applying expertise in both rock mechanics and hydraulics, and guides the diagnosis of scour and response to risk by application of currently available scour assessment techniques.

Failure Thresholds For Rcc Crest Caps, Tony L. Wahl, Bryan J. Heiner, Jacob F. Kepler

Protections Conference

Overtopping protection using roller-compacted concrete (RCC) overlays is a common improvement made to address hydrologic deficiencies at existing small- to medium-height embankment dams. Overlays allow floods to pass over the dam while preventing erosion of the original embankment. The United States has many examples of such projects on both private and public dams, including many associated with federal agencies of the Departments of the Interior and Agriculture. For one project modified with an overlay in 1993, deterioration of the RCC and poor bonding between lifts has caused concern for stability of the 0.3-m (1-ft) thick RCC lifts that cap the …

First Application Of Articulated Concrete Block Armoring With A Stabilized Stone Drainage Layer, Jeremy R. Young, Jim Nadeau

Protections Conference

Results from recent hydraulic testing of Articulated Concrete Block (ACB) systems have shown variations in the level of the ACB surface is attributed to the movement of an unconfined stone drainage layer. This movement appears to be exacerbated by thicker drainage layers, higher overtopping depths, and longer test flumes. While the apparent movement did not constitute “threshold of performance” as currently defined by ASTM D7276 and D7277, there was a desire to mitigate movement of the stone drainage layer and maintain conservatism in ACB design and construction. This paper will review the findings of Nadeau and Wedin’s paper from Protections …

Applying The Submerged Jet Erosion Test To Embankment Dam Breach Modeling, Tony L. Wahl, Blake Armstrong

Protections Conference

The submerged jet erosion test (JET) is one of several methods available for quantifying erodibility of cohesive soils, a crucial input for modeling erosion and breach of embankment dams with models such as WinDAM, EMBREA (Morris 2011), and DL BREACH (Wu 2013; 2016a; 2016b). The JET was initially developed in the late 1980s as a relatively large-scale device with a 13-mm diameter nozzle creating an impinging jet that erodes a soil sample submerged in a 61-cm diameter tank. This first device was documented in an ASTM standard (D5852-1995), but the standard was withdrawn in 2016. In the last 15 to …

Structural Failure Of The Cohesive Core Of Rockfill Dams: An Experimental Research Using Sand-Bentonite Mixtures, Ricardo Monteiro-Alves, Rafael Moran, Miguel Á. Toledo, Javier Peraita

Protections Conference

This article presents experimental research focusing on the structural failure of the central core of a rockfill dam using sand-bentonite mixtures. It comprised an extensive geotechnical characterization of soil materials and mixtures, including compaction and strength tests, as well as the construction of 1 m high and 1.5 m wide physical models. The displacements of the cohesive cores were recorded using a tailored measuring system, based on a laser pointer and a mirror, designed to amplify the real displacements. The cohesive cores were extremely sensitive to small oscillations and behaved as rigid bodies, similar to concrete slabs with three fixed …

Overtopping Erodibility Analysis For A Steep-Sloped Rockfill Embankment Dam, Ariel Rickel, Michael F. George, Rob Millar

Protections Conference

Erosion of embankment material during an overtopping event is one of the major mechanisms of failure for earthfill dams. The ability to analyze the progression of overtopping failure can prove useful in assessing the breakthrough risk of the dam, which involves understanding the behavior of the material that the dam is comprised of. While there have been studies on the behavior of smaller-grained materials such as clays and sands (e.g. Hahn et al 2000; Coleman et al. 2002; Hanson et al. 2005; Hanson et al. 2011), few have focused on erosion of larger-grained rockfill embankments.

This paper presents the erosion …

Solar Chimney Power Plants: A Mini Review, Ahmed Reda, Waseem Salah, Ahmed Suwailem, Shehab Eldin Ahmed, Omar Lasheen, Amira Elkodama, Moustafa R. Shousha, Amr Ismaiel, Anas A. Rahman

Future Engineering Journal

The main investigations of a novel solar thermal application known as SCPP are summarized in this paper. It is a method of producing electricity from solar energy that relies on the fact that air rises when it is heated. An adequate position within a tall chimney can be utilized to position a turbine to turn it, creating an updraft that can be used to generate power. This system's specifications, design, construction, and use are all covered in the paper along with experimental and analytical research related to it. It also emphasizes the development and execution of SCPP programs.

Low-Cost, Low-Weight Test Rig Design For A Laboratory-Scale Twin Rotor Wind Turbine, Ahmed Ayoub, Ahmed Elzeedy, Mahmoud Elkordy, Eslam Ayad, Mohamed Waleed, Amira Elkodama, Amr Ismaiel

Future Engineering Journal

Multi-Rotor Wind Turbine (MRWT) has been proven advantageous over Single-Rotor Wind Turbine (SRWT) in many aspects. In order to study the performance of MRWT over SRWT, this work presents a low-cost and low-weight design for a test rig for laboratory-scale wind turbine configurations. The configurations under study are a single-rotor, and a twin-rotor of the same size with a diameter of 30 cm. Aerodynamic loads have been calculated using the Blade Element Momentum (BEM) method, then the loads were used for stress analysis over the test rig proposed. The test rig is designed on Solidworks and the aerodynamic and inertial …

Performance Comparison Of Several Control Algorithms For Tracking Control Of Pantograph Mechanism, Laylaa Mahmoud Eng, Mohamed Shamseldin Dr, Mohamed Sallam Dr, Abdelghany Mohamed Prof

Future Engineering Journal

A sort of parallel manipulator known as a pantograph robot mechanism was created primarily for industrial requests that required high precision and satisfied speed. While tracking a chosen trajectory profile requires a powerful controller. Because it has four active robot links and one robot passive link in place of just two links like the open chain does, it can carry more loads than the open chain robot mechanism while maintaining accuracy and stability. The calculated model for a closed chain pantograph robot mechanism presented in this paper takes into account the boundary conditions. For the purpose of simulating the dynamics …

Relative Rate Observer Self-Tuning Of Fuzzy Pid Virtual Inertia Control For An Islanded Microgrid, Ahmed H. Mohamed, Helmy M. El Zoghby, Mohiy Bahgat, A. M. Abdel Ghany

Future Engineering Journal

Expanding the usage of renewable energy in islanded microgrids leads to a reduction in its total inertia. Low inertia microgrids have difficulties in voltage and frequency control. That affected saving its stability and preventing a blackout. To improve low inertia islanded microgrids' dynamic response and save their stability, this paper presented relative rate observer self-tuning fuzzy PID (RROSTF-PID) based on virtual inertia control (VIC) for an islanded microgrid with a high renewable energy sources (RESs) contribution. RROSTF-PID based on VIC's success in showing remarkable improvement in the microgrid's dynamic response and enhancement of its stability. Moreover, it handles different contingency …

2022 Fall Engr333 Seminar Presentation, Jordan Tuter, Aidan Bakker, Samuel Hoover, Jessica Camp

ENGR 333

File for student presentation on Carbon Neutrality for Calvin University, given by students in the Fall 2022 class of ENGR333.

Data-Driven Analysis For Facility Management In Higher Education Institution, Ashish Kumar Pampana, Jungho Jeon, Soojin Yoon, Theodore J. Weidner, Makarand Hastak

Civil and Environmental Engineering and Engineering Mechanics Faculty Publications

Planned Preventive Maintenance (PPM) and Unplanned Maintenance (UPM) are the most common types of facility maintenance. This paper analyzes current trends and status of Facility Management (FM) practice at higher education institutions by proposing a systematic data-driven methodology using Natural Language Process (NLP) approaches, statistical analysis, risk-profile analysis, and outlier analysis. This study utilizes a descriptive database entitled "Facility Management Unified Classification Database (FMUCD)" to conduct the systematic data-driven analyses. The 5-year data from 2015 to 2019 was collected from eight universities in North America. A preprocessing step included but was not limited to identifying common data attributes, cleaning noisy …

Application Of Uas‑Based Remote Sensing In Estimating Winter Wheat Phenotypic Traits And Yield During The Growing Season, Kianoosh Hassani, Hamed Gholizadeh, Saleh Taghvaeian, Victoria Natalie, Jonathan Carpenter, Jamey Jacob

Department of Agricultural and Biological Systems Engineering: Faculty Publications

Phenotyping approaches have been considered as a vital component in crop breeding programs to improve crops and develop new high-yielding cultivars. However, traditional field-based monitoring methods are expensive, invasive, and time-intensive. Moreover, data collected using satellite and airborne platforms are either costly or limited by their spatial and temporal resolution. Here, we investigated whether low-cost unmanned/unoccupied aerial systems (UASs) data can be used to estimate winter wheat (Triticum aestivum L.) nitrogen (N) content, structural traits including plant height, fresh and dry biomass, and leaf area index (LAI) as well as yield during different winter wheat growing stages. To achieve …

Investigation Of Mechanical Properties Of Recycled Fiber-Reinforced Polymer Composites Reinforcing Cement, Caleb Mull, Fnu Archie, Harry Lee, Guyuan Zhang

Discovery Undergraduate Interdisciplinary Research Internship

The usage of fiber-reinforced polymer composites in various fields has increased significantly due to their advantageous physical and mechanical properties. However, the sustainability of composite parts has not been fully solved for a long time. Most end-of-life (EOL) composite parts have been landfilled without recycling due to the recycling cost and lack of application of recycled composites. Mechanical composite recycling that shred the EOL composite part and reuse it for downgraded applications is one of the most commonly used recycling processes for the EOL composite part. In this research, mechanical composite recycling process was demonstrated for the construction application. The …

Load And Resistance Factor Design (Lrfd) Resistance Factors For Tip Grouted Drilled Shafts, Anhar Sarsour

USF Tampa Graduate Theses and Dissertations

Pressure grouting beneath the tip of drilled shafts, also known as postgrouting, has been used for more than fifty years throughout the world and has shown to be an effective means to enhance both the usable and ultimate end bearing resistance. In short, postgrouting is a form of compaction grouting beneath the shaft tip (performed after concrete has cured) that can improve the soil strength and increase the axial shaft stiffness. Until 2006, there was no published design methodology and hence the anticipated performance was speculated to be a function of injected grout volume, shaft uplift and/or the achieved grout …

Biochar Amended Biological Systems For Enhanced Landfill Leachate And Lignocellulosic Banana Waste Treatment, Xia Yang

USF Tampa Graduate Theses and Dissertations

Biochar is an inexpensive and environmentally friendly carbonaceous pyrolysis byproduct with a high surface area, pore volume, and adsorption capacities for inorganic and organic compounds. The goal of this dissertation is to evaluate the feasibility of biochar application in biological treatment systems for enhanced waste management. Three major objectives guided this research to provide a compressive understanding of biochar enhancement effects on biological treatment systems for contaminant removal, energy recovery, and environmental impacts as well as essential factors influencing biochar production and properties.

In Objective 1 a low-cost hybrid Constructed Wetland (CW) system modified with biochar/zeolite was developed for enhanced …

Influence Of Salts On The Photocatalytic Degradation Of Formic Acid In Wastewater, Azzah Nazihah Che Abdul Rahim, Shotaro Yamada, Haruki Bonkohara, Tsuyoshi Imai, Yung-Tse Hung, Izumi Kumakiri

Civil and Environmental Engineering Faculty Publications

Conventional wastewater treatment technologies have difficulties in feasibly removing persistent organics. The photocatalytic oxidation of these contaminants offers an economical and environmentally friendly solution. In this study, TiO2 membranes and Ag/TiO2 membranes were prepared and used for the decomposition of dissolved formic acid in wastewater. The photochemical deposition of silver on a TiO2 membrane improved the decomposition rate. The rate doubled by depositing ca. 2.5 mg of Ag per 1 g of TiO2. The influence of salinity on formic acid decomposition was studied. The presence of inorganic salts reduced the treatment performance of the TiO2 membranes to half. Ag/TiO2 membranes …

Structural Health Assessment Of Pavement Sections In The Southern Central United States Using Fwd Parameters, Nitish R. Bastola, Mena Souliman, Samer Dessouky, Raja Daoud

Civil Engineering Faculty Publications and Presentations

Various Departments of Transportation in the South-Central States and elsewhere have made extensive use of the Non-Destructive Testing (NDT) surface deflection bowl data. The falling weight deflectometer (FWD) test is a popular NDT-based test used by transportation authorities to evaluate the performance of flexible pavement. Nevertheless, it is rare to develop a method for evaluating pavement sections using FWD data from all sensors. There is a constant demand for DOTs and highway agencies to have a streamlined approach that can be applied directly to their databases. This research focuses on extending and verifying the concept of previously published area ratio …