Open Access. Powered by Scholars. Published by Universities.®

Engineering Commons™

Open Access. Powered by Scholars. Published by Universities.®

Chemical Engineering

Institution
Keyword
Publication Year
Publication
Publication Type
File Type

Articles 9931 - 9960 of 14163

Full-Text Articles in Engineering

Electrodeposited Cu-Based Catalysts For Alcohols From Co Hydrogenation And Electrodeposition Of Cuniw/Cuni Multilayered Alloys, Mayank Gupta Jan 2010

Electrodeposited Cu-Based Catalysts For Alcohols From Co Hydrogenation And Electrodeposition Of Cuniw/Cuni Multilayered Alloys, Mayank Gupta

LSU Doctoral Dissertations

Ethanol and higher alcohols can be used as a fuel or fuel additive in gasoline engines as well as a hydrogen carrier. One of the promising methods to synthesize these alcohols is based on thermochemical conversion of CO and H2 (CO hydrogenation). Conventional catalysts used for the conversion CO and H2 (syngas) to ethanol typically give yields less than 20% with the balance resulting mostly in the formation of the thermodynamically favored products CH4 and CO2. New catalysts with compositions designed to kinetically favor the formation of ethanol and higher alcohols are needed. Electrodeposition of nanowires offers a means to …

Go to article

A Simulation Study Of Factors That Affect Pressure Control During Kick Circulation In Managed Pressure Drilling Operations, Jose Eduardo Eduardo Chirinos Jan 2010

A Simulation Study Of Factors That Affect Pressure Control During Kick Circulation In Managed Pressure Drilling Operations, Jose Eduardo Eduardo Chirinos

LSU Master's Theses

An university-industry consortium has been studying alternative well control procedures to be used for kicks taken during managed pressure drilling (MPD) operations using the constant bottom hole pressure (CBHP) method. The CBHP method of MPD allows more precise control of wellbore pressure than conventional drilling. MPD surface equipment allows more alternatives for controlling a kick and may support faster detection of kicks and losses which can reduce the severity of a well control event. Nevertheless, the elimination of well control incidents cannot be guaranteed, and the uncertainty in downhole drilling margins are not reduced by adopting MPD methods. The primary …

Go to article

X-Ray Absorption Spectroscopy Applied To Mixed-Metal Iron-Based Fischer-Tropsch Catalysts, Andrew Allen Campos Jan 2010

X-Ray Absorption Spectroscopy Applied To Mixed-Metal Iron-Based Fischer-Tropsch Catalysts, Andrew Allen Campos

LSU Doctoral Dissertations

Synthetic fuels derived from methane, coal or biomass are essential in addressing future transportation fuel demands which are expected to exceed petroleum-derived capacities. The Fischer-Tropsch synthesis (FTS) is the most studied technique for the conversion of coal or biomass-derived syngas into transportation fuels. Fe-based catalysts are typically used for the FTS of biomass and/or coal-derived syngas due to: the relatively low cost of iron, water-gas shift activity, and low methane selectivity at industrial FTS conditions. Fe/Cu/SiO2 Fischer-Tropsch catalysts promoted with Cr, Mn, Mo, W, or Zr were studied in-situ, using Fe K-edge TPR XANES (temperature programmed reduction X-ray absorption near-edge …

Go to article

Modeling And Multiresolution Characterization Of Micro/Nano Surface For Novel Tailored Nanostructures, Rajib Mukherjee Jan 2010

Modeling And Multiresolution Characterization Of Micro/Nano Surface For Novel Tailored Nanostructures, Rajib Mukherjee

LSU Doctoral Dissertations

Nanofabrication is state of the art technology. Various chemical, mechanical, biochemical and semiconductor products have characteristics controlled by the nanostructures of the surface and interphase. Surface microscopic imaging is generally used to capture different surface features. By properly analyzing the surface image, valuable information regarding manufacturing process and product performance can be extracted. While microscopy measurements can offer very accurate qualitative information about surface features, for many applications, it is critical to obtain a quantitative description of the surface morphology. Various statistical features can be used to characterize the surface in quantitative way. Such an analysis can be done by …

Go to article

Characterization Of Rock/Fluids Interactions At Reservoir Conditions, Dayanand Saini Jan 2010

Characterization Of Rock/Fluids Interactions At Reservoir Conditions, Dayanand Saini

LSU Doctoral Dissertations

In this study, interfacial phenomena of spreading, wettability, and rock/oil adhesion interactions in complex rock/oil/water systems were characterized at reservoir conditions of elevated pressures and temperatures. Capabilities of both ambient and reservoir condition optical cells were used for measuring the oil/water interfacial tension and dynamic (the water-receding and the water-advancing) contact angles for various complex rock/oil/water systems. Well known sessile oil drop volume alteration method was successfully used in this study for evaluating the applicability of the modified Young’s equation for characterizing the line tension in complex rock/oil/water systems at reservoir conditions. This appears to be first time when rock/fluids …

Go to article

Arsenite Oxidation By Pure Cultures Of Thiomonas Arsenivorans Strain B6 In Bioreactor Systems, Aniruddha Dastidar Jan 2010

Arsenite Oxidation By Pure Cultures Of Thiomonas Arsenivorans Strain B6 In Bioreactor Systems, Aniruddha Dastidar

University of Kentucky Doctoral Dissertations

The removal of arsenic toxicity from water is accomplished by a preliminary preoxidative step transforming the most toxic form, arsenite (As (III)), to the least toxic form, arsenate (As (V)). The potential of As (III) oxidation to As (V) was initially investigated in batch reactors using the chemoautotrophic Thiomonas arsenivorans strain b6 under varying initial As (III) and cell concentrations and at optimal pH and temperature conditions (pH 6.0 and temperature 30°C). The strain b6 completely oxidized As (III) to As (V) during exponential growth phase for lower levels of As (III) concentrations (≤ 100 mg/L) but continued into stationary …

Go to article

Synthesis And Characterization Of Magnetic Hydrogel Nanocomposites For Cancer Therapy Applications, Samantha Ann Meenach Jan 2010

Synthesis And Characterization Of Magnetic Hydrogel Nanocomposites For Cancer Therapy Applications, Samantha Ann Meenach

University of Kentucky Doctoral Dissertations

Currently, cancer is the second leading cause of death in the United States. Conventional cancer treatment includes chemotherapy, radiation, and surgical resection, but unfortunately, all of these methods have significant drawbacks. Hyperthermia, the heating of cancerous tissues to between 41 and 45°C, has been shown to improve the efficacy of cancer therapy when used in conjunction with irradiation and/or chemotherapy. In this work, a novel method for remotely administering heat is presented. This method involves heating of tumor tissue using hydrogel nanocomposites containing magnetic nanoparticles which can be remotely heated upon exposure to an external alternating magnetic field (AMF). The …

Go to article

Supercritical Pyrolysis Of N-Decane, Sean Bagley Jan 2010

Supercritical Pyrolysis Of N-Decane, Sean Bagley

LSU Doctoral Dissertations

Fuels used in future generations of high-speed jet aircraft will be required to take on increasing heat loads in their role as the primary coolant for the absorption of waste heat from the engine. As a consequence, the hydrocarbon fuels will be exposed to elevated temperatures and pressures prior to their use as fuels, conditions which are beyond the critical point of the fuel and which lead to the formation of carbonaceous solid deposits in the pre-combustion environment.

Deposition of solids causes reduced engine performance and eventual failure, so understanding the mechanisms by which thermally stressed hydrocarbons become solids is …

Go to article

Transient Study Of The Wetting Films In Porous Media Using 3d X-Ray Computed Micro-Tomography: Effect Of Imbibition Rate And Pore Geometry, Pradeep Bhattad Jan 2010

Transient Study Of The Wetting Films In Porous Media Using 3d X-Ray Computed Micro-Tomography: Effect Of Imbibition Rate And Pore Geometry, Pradeep Bhattad

LSU Doctoral Dissertations

Imbibition in porous media is governed by the complex interplay between viscous and capillary forces, pore structure and fluid properties. Understanding and predicting imbibition is important in many natural and engineered applications; it affects the efficiency of oil production operations, the moisture and contaminant transport in soil science, and the formation of defects in certain types of composite materials. Majority of the studies published on the transient imbibition behavior in a porous medium were conducted in the simplified 2D transparent micromodels or the 2D projection visualization (X-ray or visible light) of the 3D porous medium. However, the pore level transient …

Go to article

Response Surface Optimization Of Crystal Violet Decolorization By Pellets Of Pyncnoporus Sanguineus., Siti Suhana Sulaiman Jan 2010

Response Surface Optimization Of Crystal Violet Decolorization By Pellets Of Pyncnoporus Sanguineus., Siti Suhana Sulaiman

Student Works (2010-2019)

Ligninolytic enzymes of white-rot fungi have broad specificities and have been implicated in transformation and mineralization of organo-pollutant with chemical structure similar to lignin e.g. synthetic dyes. This study was carried out to optimize selected parameters for decolorization of Crystal violet by Pycnoporus sanguineus in shake flasks. The parameters studied were initial dye concentration (ppm), agitation speed (rpm) and process time. They were optimized using response surface methodology (RSM). Subsequent to the optimization, the decolorization process was scaled up in stirred tank reactor (STR). Effect of different geometry of impellers on the decolorization process was studied. Curved blade and angled …

Go to article

Characteristics Of Proton Conducting Pva-Chitosan Polymer Blend Electrolytes., Mohd Fakhrul Zamani Abdul Kadir Jan 2010

Characteristics Of Proton Conducting Pva-Chitosan Polymer Blend Electrolytes., Mohd Fakhrul Zamani Abdul Kadir

Student Works (2010-2019)

The main focus of this present work is to build a good conducting solid polymer electrolyte (SPE) based on chitosan and poly(vinyl alcohol)(PVA) blend. Solution cast technique has been employed to produce sample films in this work. From the scanning electron micrographs (SEM) the surface morphology of the blend containing 40 wt.% chitosan and 60 wt.% PVA (C4P6) is homogenous and miscible in one and another. The C4P6 film is the most amorphous and is the best candidate for the polymer host in the electrolyte systems studied in the present work. Ammonium Nitrate (NH4NO3) is the doping salt that provides …

Go to article

Electrodeposition Of Tin Using Tin (Ii) Methanesulfonate From Mixture Of Ionic Liquid And Methane Sulfonic Acid., Yang Kok Kee Jan 2010

Electrodeposition Of Tin Using Tin (Ii) Methanesulfonate From Mixture Of Ionic Liquid And Methane Sulfonic Acid., Yang Kok Kee

Student Works (2010-2019)

The electrodeposition of tin from Tin(II) Methane Sulfonate (MSA) with varying concentration in air and water stable 1-butyl-1-methyl-pyrrolidinium trifluoromethanesulfonate, (BMPOTF) ionic liquid at room temperature was studied. Cyclic Voltammetry served to characterize the electrochemical behavior of tin reduction and oxidation. The diffusion coefficient of stannous ions in the mixture of BMPOTF ionic liquid and MSA based electrolyte obtained via Randles-Sevcik and Cottrell equation was 2 × 10-7 cm2/s. Electroplating on copper panel was conducted under different current densities to determine BMPOTF based tin plating solution current efficiency. Mixture of BMPOTF and MSA based tin plating solution gave current efficiency as …

Go to article

Synthesis Of Urethane Acrylate Macromer From Palm Oil-Based Polyol And Its Application As A Resin For Dental Composite., Fadhel A. A. Alsanabani Jan 2010

Synthesis Of Urethane Acrylate Macromer From Palm Oil-Based Polyol And Its Application As A Resin For Dental Composite., Fadhel A. A. Alsanabani

Student Works (2010-2019)

A slightly branched urethane acrylate macromer (UAM) was synthesized by reacting palm oil-based polyol with excess amounts of polymeric methylene diphenyl diisocyanate (MDI) to form urethane prepolymer, then reacted with 2-hydroxyethyl methacrylate (HEMA) and FT-IR spectroscopy confirmed the urethane and grafted acrylate groups. 0.2% by weight of camphoroquinone (CQ) and 0.8% by weight of ethyl-4-N,N-dimethylamino-benzoate (4EDMAB) by weight were added to render the experimental resins light-curable. Their viscosity, percentage of degree of conversion (%DC) and cross-linking density (CLD), percentage of volumetric polymerization shrinkage (%VPS), water sorption and solubility, flexural strength, modulus of elasticity and toughness were determined and compared to …

Go to article

Thermo-Electrical And Mechanical Studies On Polymer-Organically Modified Montmorillonite Composite., Norhana Abdul Halim Jan 2010

Thermo-Electrical And Mechanical Studies On Polymer-Organically Modified Montmorillonite Composite., Norhana Abdul Halim

Student Works (2010-2019)

The field of polymer-nanoclay composite has attracted a lot of attention in materials studies due to the dramatic improvement on polymers characteristics. For example mechanical and thermal properties, chemical resistance as well as the reduced gas permeability. However, structural changes and the mechanisms that may contribute to these improvements are not fully understood. In this work, the study on polymer nanoclay composite concentrates on the effects of OMON inclusion within different polymer matrix systems. The matrixes are a series of natural rubbers (Standard Malaysia Rubber – Latex grade (SMRL); Deproteinized Natural Rubber (DPNR) and Epoxidized Natural Rubber (ENR-50)), plasticized Polyvinyl …

Go to article

Electrical And Structural Studies Of Polyacrylonitrile (Pan) Complexed With Inorganic Salts., Khairul Bahiyah Md Isa Jan 2010

Electrical And Structural Studies Of Polyacrylonitrile (Pan) Complexed With Inorganic Salts., Khairul Bahiyah Md Isa

Student Works (2010-2019)

In the present study, polymer electrolyte films composed of polyacrylonitrile (PAN) as a host polymer, ethylene carbonate (EC) as the plasticizer and lithium triflate (LiCF3SO3) and sodium triflate (NaCF3SO3) as dopant salts were prepared by the solution cast technique. Five systems of polymer electrolytes films have been prepared; these systems are the plasticized-PAN system i.e. PAN-EC system, two salted-PAN systems i.e. PAN-LiCF3SO3 and PAN-NaCF3SO3, and two plasticized-salted PAN systems i.e. PAN-EC-LiCF3SO3 and PAN-EC-NaCF3SO3. The pure PAN film was prepared as a reference. The ionic conductivity for each system is characterized using impedance spectroscopy. The room temperature conductivity of the pure …

Go to article

Synthesis Of Chromium-Based Ziegler-Natta Catalysts And Thier Application In Ethylene Polymerization And Copolymerization., Wong Jun Xuan Jan 2010

Synthesis Of Chromium-Based Ziegler-Natta Catalysts And Thier Application In Ethylene Polymerization And Copolymerization., Wong Jun Xuan

Student Works (2010-2019)

Four chromium-based oxo-trinuclear carboxylate complexes were prepared by reacting Cr(NO3).9H2O with acetic acid and substituted carboxylic acids to produce [Cr3O(CH3COO)6.3H2O]NO3.7H2O,[Cr3O(ClCH2COO)6.3H2O]NO3.3H2O, [Cr3O(Cl2CHCOO)6.3H2O]NO3.H2O and [Cr3O(Cl3CCOO)6.3H2O]NO3.2H2O, which alysis (TGA).Chromium content in each complex was determined by titrimetry method and the result was in good agreement with that from TGA. Chromium(III)monochloroacetate complex[Cr3O(ClCH2COO)6.3H2O]NO3.3H2O in combination with diethylaluminium chloride formed heterogeneous catalyst system for ethylene polymerization and ethylene-propylene copolymerization. Both Al/Cr ratio and temperature influenced the catalytic activity. The maximum activity of ethylene polymerization was 1768 gPE/gCr/hr/atm, achieved by polymerizing ethylene at 29°C with Al/Cr ratio 30.8. Effect of chloro-substituent groups on carboxylic ligand was studied …

Go to article

Electrodeposition Of Tin Using Tin(Ii) Methanesulfonate From Mixture Of Ionic Liquid And Methane Sulfonic Acid., Yang Kok Kee Jan 2010

Electrodeposition Of Tin Using Tin(Ii) Methanesulfonate From Mixture Of Ionic Liquid And Methane Sulfonic Acid., Yang Kok Kee

Student Works (2010-2019)

The electrodeposition of tin from Tin(II) Methane Sulfonate (MSA) with varying concentration in air and water stable 1-butyl-1-methyl-pyrrolidinium trifluoromethanesulfonate, (BMPOTF) ionic liquid at room temperature was studied. Cyclic Voltammetry served to characterize the electrochemical behavior of tin reduction and oxidation. The diffusion coefficient of stannous ions in the mixture of BMPOTF ionic liquid and MSA based electrolyte obtained via Randles-Sevcik and Cottrell equation was 2 × 10-7 cm2/s. Electroplating on copper panel was conducted under different current densities to determine BMPOTF based tin plating solution current efficiency. Mixture of BMPOTF and MSA based tin plating solution gave current efficiency as …

Go to article

Effect Of Selected Physical And Chemical Parameters On Crystal Violet Decolorization By Immobilized Laccase., Nur Atiqah Ismail Jan 2010

Effect Of Selected Physical And Chemical Parameters On Crystal Violet Decolorization By Immobilized Laccase., Nur Atiqah Ismail

Student Works (2010-2019)

Synthetic dyes are used for coloration of various materials like textiles, leather and food. Wastewater from dyeing industries constitutes a threat to the environment as many synthetic dyes are often toxic, mutagenic and carcinogenic. Besides, light absorption is hindered by the dyes run-off creating problems to photosynthetic aquatic plants and algae. Biodegradation of waste dyestuff with enzymes provides a viable alternative compared to the often expensive physical/chemical methods. Laccase from Trametes versicolor was chosen in this study as it exhibits low substrate specificity and high ability to oxidize many pollutants which suggested its potential in wastewater treatment and bioremediation. The …

Go to article

The Surface Characteristics And Reactivity Of Residual Carbon In Coal Gasification Slag, Xianglong Zhao, Cai Zeng, Yanyan Mao, Wenhua Li, Yun Peng, Tao Wang, Boris Eiteneer, Vladimir Zamansky, Thomas H. Fletcher Jan 2010

The Surface Characteristics And Reactivity Of Residual Carbon In Coal Gasification Slag, Xianglong Zhao, Cai Zeng, Yanyan Mao, Wenhua Li, Yun Peng, Tao Wang, Boris Eiteneer, Vladimir Zamansky, Thomas H. Fletcher

Faculty Publications

In a slagging entrained-flow coal gasifier, a large portion of the inorganic matter will form liquid slag that may have strong physical and chemical interactions with char. Understanding the char-slag interaction is important for improving the modeling and design of gasifiers. This paper reports the characteristics of residual carbon in both coarse and fine slag from a typical entrained-flow coal water slurry gasifier. The surface characteristics of slag and residual carbon in slag were evaluated by scanning electron microscopy and energy dispersive X-ray spectroscopy. The reactivity of the residual carbon in slag was compared through thermal gravimetric analysis. It was …

Go to article

Optimization Of Parameters And Study Of Kinetics In Lactulose Production By Lactose Isomerization Using Strong Basic Anion Exchange Resin, Arvind Nanduri Jan 2010

Optimization Of Parameters And Study Of Kinetics In Lactulose Production By Lactose Isomerization Using Strong Basic Anion Exchange Resin, Arvind Nanduri

Masters Theses

"In this work, an experimental design was employed to investigate the effects of different operating conditions on the isomerization of lactose to lactulose by using strong basic anion exchange resin (AMBERLITE-IRA 402). Temperature, resin/lactose mass ratio and pH were considered to be the three factors affecting the conversion of lactose. Box-Behnken design was then used to optimize the operating conditions for maximum response and also to study the various interaction and main effects of the factors. The analysis of variance (ANOVA) of the experimental data showed a high correlation coefficient R² (0.99) and a low root mean square error (2.84) …

Go to article

Fabrication Of A Memory Device Using Polyaniline Nanofibers And Gold Nanoparticles, Krunal R. Waghela Jan 2010

Fabrication Of A Memory Device Using Polyaniline Nanofibers And Gold Nanoparticles, Krunal R. Waghela

Masters Theses

"Fabrication of a memory device using one-step/one-pot synthesis for making a PANI (polyaniline)/Au nanocomposite is reported. Although various devices with horizontal and vertical electrode structures were made, the basic structure used consisted of a PANI/Au thin film sandwiched between two electrodes. The ratio of the current in the OFF state to the current in the ON state was seen to be as high as 5000. These devices showed a bistable behavior, which is typical of memory devices. The PANI/Au nanocomposite thin film was constructed right on the electrode using microfabrication techniques with ultraviolet irradiation. The fabrication techniques discussed in this …

Go to article

Biodiesel Production Using Supercritical Methanol, Dhaval Nitin Modi Jan 2010

Biodiesel Production Using Supercritical Methanol, Dhaval Nitin Modi

Masters Theses

"The catalyst-free transesterification of oil (triglycerides) in supercritical methanol at a temperature and pressure above 239⁰C and 8.1MPa, respectively, provides a new way of producing biodiesel. High reaction temperature and pressure help to accelerate the transesterification because the supercritical methanol becomes non-polar and has enhanced contact with oil. The supercritical transesterification of soybean oil was carried out in a 170 ml volume high-pressure batch reactor. The pressure within the batch reactor was self-generated from heating the contents since no pumps were used. Transesterification of soybean oil with supercritical methanol readily produced biodiesel. Since the supercritical transesterification is carried out without …

Go to article

In-Plane Thermal Conductivity Modeling Of Carbon Filled Liquid Crystal Polymer Based Resins, Tayloria N. G. Adams Jan 2010

In-Plane Thermal Conductivity Modeling Of Carbon Filled Liquid Crystal Polymer Based Resins, Tayloria N. G. Adams

Dissertations, Master's Theses and Master's Reports - Open

Adding conductive carbon fillers to insulating thermoplastic resins increases composite electrical and thermal conductivity. Often, as much of a single type of carbon filler is added to achieve the desired conductivity, while still allowing the material to be molded into a bipolar plate for a fuel cell. In this study, varying amounts of three different carbons (carbon black, synthetic graphite particles, and carbon fiber) were added to Vectra A950RX Liquid Crystal Polymer. The in-plane thermal conductivity of the resulting single filler composites were tested. The results showed that adding synthetic graphite particles caused the largest increase in the in-plane thermal …

Go to article

A Microfluidic Method To Measure Diffusion In Hydrogels, Andrew Lee Litzenberger Jan 2010

A Microfluidic Method To Measure Diffusion In Hydrogels, Andrew Lee Litzenberger

Master’s Theses

A novel microfluidic method is proposed for studying diffusion of small molecules in a hydrogel. Microfluidic devices were prepared with semi-permeable microchannels defined by crosslinked poly(ethylene glycol) (PEG). Uptake of dye molecules from aqueous solutions flowing through the microchannels was observedoptically and diffusion of the dye into the hydrogel was quantified. To complement the diffusion measurements from the microfluidic studies, nuclear magnetic resonance(NMR) characterization of the diffusion of dye in the PEG hydrogels was performed. The diffusion of small molecules in a hydrogel is relevant to applications such asdrug delivery and modeling transport for tissue-engineering applications. The diffusion of small …

Go to article

Solid-State Compatibilization Of Immiscible Polymer Blends: Cryogenic Milling And Solid-State Shear Pulverization, Marc Frederick Henry Jan 2010

Solid-State Compatibilization Of Immiscible Polymer Blends: Cryogenic Milling And Solid-State Shear Pulverization, Marc Frederick Henry

Master’s Theses

The blending of common polymers allows for the rapid and facile synthesis of new materials with highly tunable properties at a fraction of the costs of new monomer development and synthesis. Most blends of polymers, however, are completely immiscible and separate into distinct phases with minimal phase interaction, severelydegrading the performance of the material. Cross-phase interactions and property enhancement can be achieved with these blends through reactive processing or compatibilizer addition. A new class of blend compatibilization relies on the mechanochemical reactions between polymer chains via solid-state, high energy processing. Two contrasting mechanochemical processing techniques are explored in this thesis: …

Go to article

A General Approach Towards The Synthesis Of Amido-Functionalized Biodegradable Polyesters, Joseph Russell Jan 2010

A General Approach Towards The Synthesis Of Amido-Functionalized Biodegradable Polyesters, Joseph Russell

Master’s Theses

The thesis presented here describes methodologies to produce pendant group functionalized polyesters from amido-functionalized α-hydroxy acids. The synthetic methods used to produce the functionalized α-hydroxy acids are compatible with a wide array of functional groups, making this technique highly versatile. The synthesis of functionalized polyesters was investigated to develop polymers with properties that may improve the capabilities of existing biodegradable polyesters for applications in controlled release pharmaceuticals. Chemically modified a-hydroxy acids were synthesized by reacting glyoxylic acid with a primary or secondary amide. To demonstrate the utility of this reaction, fourstructurally dissimilar amide substituents were examined including 2-pyrrolidione, benzamide, acetamide …

Go to article

Optimization Of Inductively Coupled Plasma Dry Etching For Planar Waveguide Fabrication., Lim Weng Hong Jan 2010

Optimization Of Inductively Coupled Plasma Dry Etching For Planar Waveguide Fabrication., Lim Weng Hong

Student Works (2010-2019)

Optimization of the Inductively Coupled Plasma (ICP) dry etching process parameters has been carried out. Seven main etching characteristics were considered in order to produce good etching quality. These characteristics are glass etching rates, selectivity of chromium to glass etching rate, channel side wall roughness, channel side wall vertical profile, channel cleanliness, critical dimension and resolution. Several ICP parameters that are affecting the etching characteristic were optimized in this work. These optimised ICP parameters obtained from this work are ICP power (880 W), bias power (45 W), operating chamber pressure (10 mtorr), reactant gas composition, reactant gas flow rate (35sccm …

Go to article

Catalytic Oxidative Desulfurization Of A Model Diesel, Dongxing Liu Jan 2010

Catalytic Oxidative Desulfurization Of A Model Diesel, Dongxing Liu

LSU Major Papers

An analysis of heterogeneous oxidation catalysts was performed to determine the activities and optimal operating conditions for the multiphase oxidative desulfurization (ODS) reactions, using a model diesel. Catalysts studied included well-characterized Pd on Al2O3 and activated carbon supports, and carbon-supported Mo2C and W2C, which were prepared by temperature programmed reaction. Several other typical oxidation catalysts were also examined. The model diesel consisted of ~1 wt% sulfur compounds (thiophene and dibenzothiophene) with appropriate amounts of aliphatic, alkylaromatic and N-heterocyclic compounds to simulate a raw number 2 diesel. With oxygen as the oxidant in ODS reactions of this model diesel (70-90ºC, 0.8-1.8 …

Go to article

Retrofit Of Distillation Columns In Biodiesel Production Plants, Nghi Nguyen, Yaşar Demirel Jan 2010

Retrofit Of Distillation Columns In Biodiesel Production Plants, Nghi Nguyen, Yaşar Demirel

Yaşar Demirel Publications

Column grand composite curves and the exergy loss profiles produced by the Column-Targeting Tool of the Aspen Plus simulator are used to assess the performance of the existing distillation columns, and reduce the costs of operation by appropriate retrofits in a biodiesel production plant. Effectiveness of the retrofits is assessed by means of thermodynamics and economic improvements. We have considered a biodiesel plant utilizing three distillation columns to purify biodiesel (fatty acid methyl ester) and byproduct glycerol as well as reduce the waste. The assessments of the base case simulation have indicated the need for modifications for the distillation columns. …

Go to article

Nonequilibrium Thermodynamics Modeling Of Coupled Biochemical Cycles In Living Cells, Yaşar Demirel Jan 2010

Nonequilibrium Thermodynamics Modeling Of Coupled Biochemical Cycles In Living Cells, Yaşar Demirel

Yaşar Demirel Publications

Living cells represent open, nonequilibrium, self organizing, and dissipative systems maintained with the continuous supply of outside and inside material, energy, and information flows. The energy in the form of adenosine triphosphate is utilized in biochemical cycles, transport processes, protein synthesis, reproduction, and performing other biological work. The processes in molecular and cellular biological systems are stochastic in nature with varying spatial and time scales, and bounded with conservation laws, kinetic laws, and thermodynamic constraints, which should be taken into account by any approach for modeling biological systems. In component biology, this review focuses on the modeling of enzyme kinetics …

Go to article

First Prev Next Last