Engineering Commons^™

Design Optimization Of Pressure Vessel With Particular Design Considerations, Artik Patel

Mechanical and Aerospace Engineering Theses - Archive

The pressure vessels in industries are generally designed with a high safety factor because the rupture of a pressure vessel can be extremely dangerous. A vessel that is poorly designed or ineffectively designed to handle high pressure pose a very significant threat to life and property. Because of this, the design and verification of pressure vessels is governed by design codes specified by the ASME (American Society of Mechanical Engineers) Boiler and Pressure Vessel Code. The objective of this thesis work is to minimize the total weight of a real-world pressure vessel structure subjected to stress constraints specified by the …

Smartwalker – Rolling Walker Instrumentation And Data Acquisition System Development To Monitor, Visualize And Store Rolling Walker Usage Data, Mauricio Jaguan Nieves

Mechanical and Aerospace Engineering Theses - Archive

The Smart Walker project was designed to fill a necessity of monitoring in real time the use of rolling walkers (RW) and study the causes that contribute to the high rate of fallings among its users. The main objectives of the project were to measure the major forces applied by RW users in real time and store it safely for further analysis. The first prototype of the Smart Walker includes the measurement of axial load, torque and gripping force applied on the handle as well as acceleration and rotation angles while it is being used. The axial load was measured …

Automated System For The Characterization Of The Biomechanical Properties Of Human Soft Tissue, Michael R. Abraham

Mechanical and Aerospace Engineering Theses - Archive

Vaginal prolapse is a common condition that affects a large number (approximately 3.3 million in the US) of women, mainly above the age of 50 years. The condition is characterized by the weakening and breakdown of the pelvic support structures such as muscles and connective tissues, leading to the dislodging and prolapse of pelvic organs. Current examinations of the pelvic tissue are manually performed by the physician who assesses its rigidity. These exams are subjective and offer qualitative rather than quantitative results of the state of the pelvic tissue. In this research, a complete system was conceptualized and designed to …

Automated Lattice Optimization Of Hinge Fitting With Displacement Constraint, Vignesh Dakshnamoorthy

Mechanical and Aerospace Engineering Theses - Archive

Additive manufacturing enables fabrication of complex lattice cell structures that are not manufacturable using conventional methods. In order to exploit this lattice capability in structural designs, the effect on structural performance must be considered. This paper uses a goose neck door hinge component to illustrate the effects of lattice structure optimization when stiffness criteria drive part design. The effect of intermediate lattice cell density parameters on resulting lattice configurations from automated lattice structure optimization are studied and it is found that the compliance of the model depends upon the range of intermediate density elements present. The paper then compares the …

Hole Size, Location Optimization In A Plate And Cylindrical Shell For Minimum Stress Points Interfacing Ansys And Matlab, Soundararaj Thangavel

Mechanical and Aerospace Engineering Theses - Archive

Discontinuities in Structures are inevitable. One such discontinuity in a plate and cylindrical shell is presence of a hole / holes. In Plates they are used for mounting bolts where as in Cylinder / Pressure Vessel, they provide provision for mounting Nozzles / Instruments. Location of these holes plays a primary role in minimizing the stress acting with out any external reinforcement. In this Thesis work, Location Parameters are optimized for the presence of one or more holes in a plate and cylindrical shell interfacing ANSYS and MATLAB with boundary constraints based on the geometry. Contour plots are generated for …

A Methodology To Develop A Control System App For Data Center Cooling, Varun Rahul

Mechanical and Aerospace Engineering Theses - Archive

DCIM (Data Center Infrastructure Management), are tools that are available in the industry to serve the purpose of controlling different parameters in the data center. But their cost is significantly high. The idea of developing a tool that is easily accessible at highly competitive costs will be the USP for its development. While developing such a software tool, there will be a few points that will be thoroughly emphasized upon: The software tool will have the flexibility of being used on any Operating System. It will be portable i.e. it can be set up on any device that supports a …

Interactive Analysis Of General Beam Configurations Using Finite Element Methods And Javascript, Christopher G. Hernandez

Mechanical and Aerospace Engineering Theses - Archive

Advancements in computer technology have contributed to the widespread practice of modelling and solving engineering problems through the use of specialized software. The wide use of engineering software comes with the disadvantage to the user of costs from the required purchase of software licenses. The creation of accurate, trusted, and freely available applications capable of conducting meaningful analysis of engineering problems is a way to mitigate to the costs associated with every-day engineering computations. Writing applications in the JavaScript programming language allows the applications to run within any computer browser, without the need to install specialized software, since all internet …

Slicing Algorithm For Complex Contour Generation From Coarse Meshed Iso-Surface Data, Divya Hareshkumar Shukla

Mechanical and Aerospace Engineering Theses - Archive

Finite element based topology optimization is used to develop complex geometric configurations for additive manufacturing. Complex coarse-meshed Iso-surface data is extracted from topology optimization results and smooth mathematical geometry must be fit to that data in order to accomplish further design development. To accomplish this geometry fitting, cross-section data must be extracted at specific locations. The stereo lithography (STL) file format is a triangular mesh format which can be developed using 3D CAD Software and is widely used for additive layer manufacturing processes. The main aim of this research work is to generate cross-section contours using a nearest tail-to-head distance …

Experimental And Numerical Study Of Heat Transfer Phenomenon In A Micro Droplet Reactor, Chintan Jitendra Gandhi

Mechanical and Aerospace Engineering Theses - Archive

Temperature is an important control parameter during chemical reaction process. Micro reactors have attracted much attention due to its capability of excellent heat and mass transfer, fast reaction, and inherent safety of small scale. Among various types of micro reactors, micro droplet as a batch reactor has its own advantages such as high multiplexing capability. However, strong heat dissipation characteristics of microscale systems (due to large surface to volume ratio) hampers the measurement and monitor of enthalpy changes during the reaction. This study mainly focuses on temperature monitoring at micro droplet reactor by using thin film resistance temperature detector (RTD). …

An Open Source App-Hardware Setup To Control The System For Data Center Cooling, Anay Satish Darekar

Mechanical and Aerospace Engineering Theses - Archive

Control systems for data center cooling exists in the proprietary form and are often sold as part of the overall unit. They provide vital information related to the cooling systems and supply information on the temperature and humidity conditions inside the data center. Since most of these control systems software are proprietary they are expensive and hence not accessible to all. This project aims to develop a control system that operates on similar lines, but is economical and easily available. Developing a desktop or mobile based application not only gives the end user control over the cooling method (ex. DEC …

Computational Study And Optimization Of Wet Cooling Media In Direct Evaporative Heat Exchanger, Tejas Vijay Bhongale

Mechanical and Aerospace Engineering Theses - Archive

Evaporative cooling media pads are the primary component of importance in direct evaporative cooling units. To increase the overall efficiency of direct evaporative cooling systems, a wet cooling media pad is considered for further optimization in design and operation. An installation technique called ‘staging’ of cooling media pads is examined and evaluated for its incremental cooling, water usage, and operational cooling efficiency. For Staging, a cooling media is divided into multiple vertical sections, and separate water distribution headers control each part. Staging of cooling media can reduce water consumption in data centers and potentially lessen the amount of cooling media …

Fabrication, Calibration And Characterization Of Micro-Scale Resistance Temperature Detectors, Kunjan Anilkumar Chaudhari

Mechanical and Aerospace Engineering Theses - Archive

Through this research, fabrication, calibration and characterization of micro-scale Resistance Temperature Detector (RTD) were studied. The RTD is meant to sense the temperature at the micro scale level on the hot spot of integrated circuit devices. Material that we focused in this study was indium tin oxide (ITO). Indium tin oxide thin films are widely used as an electrode owing to its optically transparent and electrical conducting properties. However, ITO thin film behavior as an RTD has not been well studied yet, which we aimed in this study. The commercially available ITO thin film deposited on a glass substrate was …

Fem Analysis Of Composite Stringers For An Airplane Fuselage, Akashsingh Birendrasingh Thakur

Mechanical and Aerospace Engineering Theses - Archive

With the advent of technology, materials have advanced many folds; One such technical revelation has been Fiber-reinforced Composite Materials. Composite materials have two major advantages, among many others: Improved strength and stiffness, especially compared to other materials on a unit weight basis. For example, Composite materials have stiffness comparable to the stiffness of steel but with a strength decimal order higher and more than three times lighter. These advantages have led to new aircraft and spacecraft designs that are radical departures from past efforts based on conventional materials. The stringers serve to take up(along with the skin) the compression and …

Solder Ball Reliability Assessment Of Wafer Level Chip Scale Package (Wlcsp) Through Power Cycling, Bhavna Conjeevaram

Mechanical and Aerospace Engineering Theses - Archive

Failure analysis and its effects are major reliability concerns in electronic packaging. More accurate fatigue life prediction can be obtained after the consideration of all affecting loads on the electronic devices. When an electronic device is turned OFF and then turned ON multiple times, it creates a loading condition called Power Cycling. The die is the main heat source causing non-uniform temperature distribution. The solder ball reliability assessment of wafer level chip scale package (WLCSP) is done through computational methods such as Finite element analysis. WLCSPs use wafer level package technology which is an extension of the Wafer Fab process, …

Computational Study Of Impact Of Thermal Shadowing In Non-Directed Flow For Air And Oil Cooled Servers. Form Factor Study And Customization Of Heat Sink For Data Center Application, Chinmay Hemantkumar Bhatt

Mechanical and Aerospace Engineering Theses - Archive

In today’s networking world, the usage of Servers and Data centers has been increasing significantly with a corresponding increase in power. The data center energy efficiency largely depends on thermal management of servers. Currently, air cooling is the most widely used thermal management technology in data centers. However, air cooling is starting to reach its limits due to high powered microprocessors and packaging. To overcome these limitations of air cooling in data centers, liquid cooling methods are starting to gain more traction. Thermal shadowing is the effect in which temperature of a cooling medium increases by carrying heat from one …

Static And Dynamic Fea Analysis Of A Composite Leaf Spring, Himanshu Arun Raut

Mechanical and Aerospace Engineering Theses - Archive

Composite materials are widely used in aeronautical, marine and automotive industries, because of their excellent mechanical properties, low density and ease of manufacture. Due to this increasing trend to utilize composite materials, it has become necessary to investigate the pros and cons of composites. This research investigated the static and dynamic behaviors for a composite leaf spring that are used in Chevrolet Corvette Grand and light tractor-trailers. The objective of this study was to find the cause of de-lamination/ failure of the unidirectional composite layers in varying cross sections of the leaf spring. Finite element method is used to calculate …

Trajectory Optimization Using Indirect Methods And Parametric Scramjet Cycle Analysis, Joseph Williams

Open Access Theses

This study investigates the solution of time sensitive regional strike trajectories for hypersonic missiles. This minimum time trajectory is suspected to be best performed by scramjet powered hypersonic missiles which creates strong coupled interaction between the flight dynamics and the performance of the engine. Comprehensive engine models are necessary to gain better insight into scramjet propulsion. Separately, robust and comprehensive trajectory analysis provides references for vehicles to fly along. However, additional observation and understanding is obtained by integrating the propulsion model inside the trajectory framework. Going beyond curve fitted thrusting models, an integrated scramjet cycle analysis offers rapid trade studies …

Computational Fluid Dynamics Is Key To Better Flying Aircraft, Nihad E. Daidzic

Aviation Department Publications

No abstract provided.

Numerical Investigation Of Vortex Generators And Jet In Cross-Flow Enhancements, Aditya Raman

Mechanical and Aerospace Engineering Dissertations - Archive

Vortex generators have extensively been used over the past few decades for heat transfer applications. Their passive form of enhancement coupled with the ease of their implementation is the primary reason for their growing popularity. The streamwise counter rotating vortex pair (CVP) that is formed downstream of these vortex generators act as a source of energy that can set up stirring scales to enhance heat transfer and improve mixing. The CVP can be used to energize the boundary layer in the case of wall bounded flows, and as a consequence vortex generators have also been used to delay flow separation. …

Computational Design And Flow Analysis Of Smart Flow Control Device For Dynamic Cold Plate Used In Computer Server Cooling, Sruthi Errukula

Mechanical and Aerospace Engineering Theses - Archive

One of the areas which Electronics cooling research is focusing on is high heat fluxes and non-uniform power distribution. Cooling is always required for maximum junction temperature and as such it is important to mitigate hot spots. These hot spots result in large temperature differences across the surface of high-end devices such as multi-core chip scale packages. One possible solution for non-uniform power distribution across the chip can be use of dynamic cold plate cooling along with smart flow control device and thus this project aims at developing and testing of dynamic cold plate integrated with use of smart flow …

Fiber Bragg Grating (Fbg) Sensors For The Simultaneous Measurements Of Strain And Temperature, Abhay Kumar Singh

Mechanical and Aerospace Engineering Theses - Archive

This research presents a single fiber Bragg grating (FBG) sensor that is capable of measuring the axial load and temperature simultaneously. The FBG sensor is coated with a block of recrystallized Lophine, which introduces the bandwidth modulation of the FBG reflectance spectrum. Thermal-mechanical testing of the Lophine-coated FBG sensor under different load and temperature combinations was carried out. It was discovered that the FBG bandwidth is linearly proportional to the applied load and temperature. By fitting the measured FBG bandwidths and central Bragg wavelengths as linear functions of the axial load and temperature, we demonstrated that the axial load and …

Effect Of Viscoelastic Modeling Of Pcb On The Board Level Reliability Of Wafer Chip Scale Package (Wcsp) In Comparison To Orthotropic Linear Elastic Modeling, Avinash Anaskure

Mechanical and Aerospace Engineering Theses - Archive

The assessment of board level solder joint reliability during thermal cycling is very important for electronic packages. During thermal cycling, the mismatch in Coefficient of Thermal Expansion (CTE) between the materials used in the package induces stress on the solder interconnects and result in deformation stresses. Finite element tools are widely used for rapid design optimization and also for understanding board level reliability issues. Lumped board properties approach, explicit geometry approach, and ECAD approach are the three widely used approaches for creating models for PCBs. In the lumped board properties approach, orthotropic elastic material properties are assigned to PCBs. However, …

Effect Of Manufacturing-Induced Defects And Orientation On The Failure And Fracture Mechanism Of 3d Printed Structures, Amit Khatri

Mechanical and Aerospace Engineering Theses - Archive

Additive manufacturing is a rapidly growing cutting edge technology. Number of experimental studies have shown that strength of product manufactured by additive Fused Deposition Method (FDM) is influenced by different processing parameters involved during manufacturing. This thesis work presents experimental and theoretical investigation of mechanical behavior of ABS material fabricated with variation in some of process parameters such as Axis Orientations, Raster Orientation, Infill Percentage, Layer Height and Number of Shells. Different experiments were designed to understand the basics of 3D printing manufacturing and to characterize the mechanical behavior of 3D printed structures. This study helps to understand, how different …

Development Of An Analytical Model For Beams With Two Dimples In Opposing Directions, Mofareh H. Ghazwani

Masters Theses

Structures such as beams and steel plates can produce potentially high levels of unwanted vibrations and noises in the environment. A method of improving the vibration and acoustic characteristics of beams based on introducing dimples on its surfaces will be presented in this study. This method focuses on creating two dimples in the same and opposite direction on beam’s surface where the effect of dimples on the change in beam’s natural frequencies is the problems of interest.

A boundary value model (BVM) is developed for a beam with two dimples and subjected to various boundary conditions using Hamilton’s Variational Principle. …

Design Of Flow Control Device For Dynamic Cold Plate And Optimization Of Servers To Decrease Junction Temperature Of Heat Sinks, Kunal Atulkumar Shah

Mechanical and Aerospace Engineering Theses - Archive

Electronics cooling research is facing the challenges of high heat flux removal and increased pumping power. Not much attention has been focused related to server and module level cooling. The continued increase in heat fluxes at the chip level due to new and robust technology nodes following Moore’s law is starting to push the limits of air cooling and especially for high end servers. An alternative to air cooling is liquid (water and oil immersed) cooling. The optimized dynamic cold plates that use water as the cooling fluid have shown over 28 % and 52% of reduction in pumping power …

Accumulator Volume Sensor Final Project Report, Chris Naughton, Kinwei Yu, Michael George

Mechanical Engineering

Accumulator Volume Sensing Team has developed two sensor designs aimed at detecting the position of the piston within a 4024 accumulator. The two designs include the use of a Renishaw LMA10 magnetic encoder and a SpectraSymbol HotPot linear potentiometer. The magnetic encoder solution drastically increases the accuracy of sensing the piston position compared to the current solutions of both a string-pot and linear variable differential transformer while costing slightly less. The linear potentiometer seeks to provide a solution that drastically decreases the cost compared to the present sensing methods. Both designs call for a modification to one half of the …

Numerical Investigation Of Crossflow Instability On The Hifire-5, Matthew T. Lakebrink

Open Access Dissertations

Stability analysis was performed with the Langley Stability and Transition Analysis Code (LASTRAC) on a 38.1% scale model of the HIFiRE-5 elliptic-cone forebody to study crossflow-induced transition in hypersonic boundary layers. A resolution study consisting of three grids (30e6, 45e6, and 91e6 points) indicated that the fine grid was sufficiently resolved. Results were largely insensitive to grid resolution over the acreage and near the attachment line. The percent variation in second-mode properties along the semi-minor axis was less than 1% between the medium and fine grids. The variation in crossflow-wave properties was less than 0.04% between the medium and fine …

Integration And Qualification Of The P-Pods On The Vega Maiden Flight, Ryan Nugent

Master's Theses

On February 13, 2012, California Polytechnic State University, San Luis Obispo flew three Poly-Picosatellite Orbital Deployers (P-PODs), carrying seven European University CubeSats sponsored by the European Space Agency (ESA), on the Vega Maiden Flight. This was the first time CubeSats shared a ride to space with other payloads on an ESA-owned launch opportunity. In order to meet launch requirements, it must be proven through proper documentation that the P-POD would operate properly and not interfere with the launch vehicle or other payloads on the mission. This thesis outlines the program flow, required documentation, and issues encountered during the launch campaign …

Assessing Fuel Burn Inefficiencies In Oceanic Airspace, Stephen Builta

Open Access Theses

Increasing the efficiency of aircraft operations offers a shorter term solution to decreasing aircraft fuel burn than fleet replacement. By estimating the current airspace inefficiency, we can get an idea of the upper limit of savings. Oceanic airspace presents a unique opportunity for savings due to increased separation differences vs. overland flight.

We assess fuel burn inefficiency by comparing estimated fuel burn for real world flights with the estimated optimal fuel burn. For computing fuel burn, we use the Base of Aircraft Data (BADA) with corrections based on research by Yoder (2005). Our fuel burn results show general agreement with …

Mechanism Of Shot Peening Enhancement For The Fatigue Performance Of Aa7050-T7451, Daniel James Chadwick

Open Access Theses

Shot peening is a dynamic cold working process involving the impingement of peening media onto a substrate surface. Shot peening is commonly employed as a surface treatment technique within the aerospace industry during manufacturing, in order to improve fatigue performance of structural components. The compressive residual stress induced during shot peening is understood to result in fatigue crack growth retardation, improving the performance of shot peened components. However, shot peening is a compromise between the benefit of inducing a compressive residual stress and causing detrimental surface damage. Due to the relatively soft nature of AA7050-T7451, shot peening can result in …