Engineering Commons^™

Learning Local, Quenched Disorder In Plasticity And Other Crackling Noise Phenomena, Stefanos Papanikolaou

Faculty & Staff Scholarship

When far from equilibrium, many-body systems display behavior that strongly depends on the initial conditions. A characteristic such example is the phenomenon of plasticity of crystalline and amorphous materials that strongly depends on the material history. In plasticity modeling, the history is captured by a quenched, local and disordered flow stress distribution. While it is this disorder that causes avalanches that are commonly observed during nanoscale plastic deformation, the functional form and scaling properties have remained elusive. In this paper, a generic formalism is developed for deriving local disorder distributions from field- response (e.g., stress/strain) timeseries in models of crackling …

Mechanical And Aerospace Engineering, 2017-2018, College Of Engineering And Applied Sciences

Mechanical and Aerospace Engineering News

• Letter from the Chair
• Introducing Dr. Jinseok Kim
• Use of 3D Printing at WMU Helps Borgess Cardiologist Plug Holes in the Heart
• Department of Mechanical and Aerospace Engineering Develops Semi-Virtual Reality Powered Wheelchair Simulator
• The Western Aerospace Launch Initiative (WALI)
• 2017 NSF I-Corps Experience of MAE team
• Matthew Baird's Internship Experiences at JPL and GRC
• More Department News
• Faculty Sabbaticals

Structured Light-Field Focusing 3d Density Measurements Of A Supersonic Cone, Ryonosuke Ozawa

Electronic Theses and Dissertations

This study describes three-dimensional (3D) quantitative visualization of density field in a supersonic flow around a cone spike. A measurement of the density gradient is conducted within a supersonic wind tunnel facility at the Propulsion and Energy Research Laboratory at the University of Central Florida utilizing Structured Light-Field Focusing Schlieren (SLLF). In conventional schlieren and Shadowgraph techniques, it is widely known that a complicated optical system is needed and yet visualizable area depends on an effective diameter of lenses and mirrors. Unlike these techniques, SLLF is yet one of the same family as schlieren photography, it is capable of non-intrusive …

The Effect Of Martensite-Fractions Assumptions In Shape Memory Alloy Springs, Christian Vazquez

Electronic Theses and Dissertations

This research addresses various models of a spring-mass system that uses a spring made of a shape memory alloy (SMA). The system model describes the martensite fractions, which are values that describe an SMA's crystalline phases, via differential equations. The model admits and this thesis contrasts two commonly used but distinct assumptions: a homogeneous case where the martensite fractions are constant throughout the spring's cross section, and a bilinear case where the evolution of the martensite fractions only occurs beyond some critical radius. While previous literature has developed a model of the system dynamics under the homogeneous assumption using the …

Aerodynamic Design And Analysis Of A Large-Scale Stall-Regulated H-Type Vertical Axis Wind Turbine For An Offshire Floating Installation, Brian Peter Hand

PhDs

Wind energy has witnessed a consistent expansion over the past decade, especially with the move to offshore installation. There is an increasing need to further exploit superior offshore wind resources, which is pushing multi-megawatt wind turbines into deeper water locations where the current popular horizontal axis wind turbine configuration is not entirely suitable. In particular, there has been a renewed interest in the vertical axis wind turbine (VAWT) configuration due to its inherent design attributes for an offshore floating application and also its potential to provide a significant reduction in the system cost of energy. However, challenges still remain as …

Non-Intrusive Optical Measurement Of Electron Temperature In Near Field Plume Of Hall Thruster, Peter J. Urban

ETD Archive

Currently there is a large interest in the use of more efficient means of propulsion in long term missions due to the costs and difficulties associated with placing and maintaining the needed fuel for conventional chemical systems in orbit. Mass reduction of upper stages will return large returns due to the great reduction in required lower stage fuel. Due to these factors, alternatives are undergoing active research, though this paper is concerned with the area of electrical propulsion. Electric propulsion is broadly defined as propulsion where the energization of the exhaust occurs via application of electromagnetic fields as opposed to …

Performance Trades For Multiantenna Gnss Multisensor Attitude Determination Systems, Nathan A. Tehrani, Jason N. Gross

Faculty & Staff Scholarship

We present various performance trades for multiantenna global navigation satellite system (GNSS) multisensor attitude estimation systems. In particular, attitude estimation performance sensitivity to various error sources and system configurations is assessed. This study is motivated by the need for system designers, scientists, and engineers of airborne astronomical and remote sensing platforms to better determine which system configuration is most suitable for their specific application. In order to assess performance trade-offs, the attitude estimation performance of various approaches is tested using a simulation that is based on a stratospheric balloon platform. For GNSS errors, attention is focused on multipath, receiver measurement …

Flow Control Of Tandem Cylinders Using Plasma Actuators, Jonah Larsen

Honors Undergraduate Theses

The flow over a set of tandem cylinders at a moderate Reynolds numbers (Re), and with different separation lengths has been studied. Two dimensional (2D) and three-dimensional (3D) plasma actuators were used to control the flow over the leading cylinder to change the vortex shedding, and subsequently the flow on the second cylinder. The 3D plasma actuator was segmented along the length of the cylinder with a spacing of λ = 4 while the 2D actuator simply ran straight down the span of the cylinder. Particle image velocimetry (PIV) measurements were used to investigate the flow along the central plane …

Electrostatic Potential And Valence Modulation In La0.7sr0.3mno3 Thin Films, Robbyn Trappen, A. C. Garcia- Castro, Vu Thanh Tra, Chih-Yeh Huang, Wilfredo Ibarra-Hernandez, James Fitch, Sobhit Singh, Jingling Zhou, Guerau Cabrera, Ying-Hao Chu, James M. Lebeau, Aldo H. Romero, Mikel B. Holcomb

Faculty & Staff Scholarship

The Mn valence in thin film La0.7Sr0.3MnO3 was studied as a function of film thickness in the range of 1–16 unit cells with a combination of non-destructive bulk and surface sensitive X-ray absorption spectroscopy techniques. Using a layer-by-layer valence model, it was found that while the bulk averaged valence hovers around its expected value of 3.3, a significant deviation occurs within several unit cells of the surface and interface. These results were supported by first principles calculations. The surface valence increases to up to Mn3.7+, whereas the interface valence reduces down to Mn2.5+. The change in valence from the expected …

Specific Air Range (Sar) And How To Estimate It, Nihad E. Daidzic

Aviation Department Publications

No abstract provided.

Relationship Between Airline Category, Geographical Region, And Safety Performance, Peter Simpson

Walden Dissertations and Doctoral Studies

Passengers rank safety as a key factor in airline choice. Thus, safety performance impacts an airline's ability to attract customers. The purpose of this correlational study was to examine the relationship and difference between airline category low-cost carriers (LCCs) and full-service carriers (FSCs), geographical region, and safety performance measured by accident rates. The target population comprised all airlines in all countries that had an accident during the 14-year period 2004 to 2017. Data consisted of archival data of all global airline accidents and airline departure frequencies for the 14-year period. The theory of organizational accidents in complex sociotechnical systems explains …

Characterization Of Acoustic Modes In Aeroengines, Michelle Otero

Electronic Theses and Dissertations

Acoustic instabilities remain a key design concern faced in the development of liquid rocket engines. The interaction between the acoustic modes and the occurring combustion reactions can be detrimental to the engine. The fluctuating pressure waves resulting from the flame oscillations in the system can potentially lead to engine failure. For this reason, research in acoustic instabilities and methods to minimize the influences on the engine, has maintain interest in the aerospace community. The scope of this study was to design, optimize and characterize acoustic behaviors of a scaled rocket combustion chamber simulating acoustic pressure waves. Tangential and longitudinal acoustic …

Affordable Small System Calibration & Tvac Testing, Space Dynamics Laboratory

Space Dynamics Laboratory Publications

Ensure that your sensor will perform correctly during operation by validating image quality, radiometric performance, and operation temperature performance!

The Space Dynamics Laboratory (SDL) has been calibrating electro-optical sensors for over 50 years. During this time, SDL has designed and developed a collection of specialized equipment that is available for calibrating smaller optical systems, which can be very affordable.

Neowise: Near Earth Object Wide-Field Infrared Survey Explorer, Space Dynamics Laboratory

Space Dynamics Laboratory Publications

NEOWISE began as the Wide-field Survey Explorer (WISE), a highly sensitive astronomical telescope that surveyed the entire sky in four mid‐infrared bands spanning from 2.6 to 26 microns. Launched in December 2009, WISE scanned the entire sky one and a half times and cataloged hundreds of millions of astronomical objects, including many asteroids, brown dwarf stars, and ultra‐ luminous infrared galaxies.

Gr: Geospatial Reality, Space Dynamics Laboratory

Space Dynamics Laboratory Publications

The Space Dynamics Laboratory developed Geospatial Reality (GR), a Government-owned, open software architecture that enhances military/DoD system capability by visually presenting warfighters with tactically relevant, geospatial situational awareness information in real time. GR is designed to facilitate both real-time Augmented Reality (AR) and Virtual Reality (VR) applications on a variety of systems. Most of the underlying software methods are typically the same for both AR and VR and often the location of the operator is the only difference between the two.

Theoretical Paschen's Law Model For Aerospace Vehicles: Validation Experiment, Jaysen Mulligan Aroche

Electronic Theses and Dissertations

Aerospace vehicles often experience triboelectric charging while traversing the atmosphere. Triboelectric charging occurs when a material come into frictional contact with a different material. Aerospace vehicles triboelectrically charge due to frictional contact with dust and ice crystals suspended in the atmosphere. Launch vehicles traversing ice clouds in low-pressure atmosphere are especially prone to electrostatic discharge events (i.e. sparks). These conditions are hazardous and affect the vehicle's launch commit criteria. In 2010, engineers from an ARES-I rocket launch reported concerns with triboelectric charging over their self-destruct system antenna. This concern was addressed by putting the antenna through harsh conditions in a …

The Exploration Of Rotating Detonation Dynamics Incorporating A Coal-Based Fuel Mixture, John P. Rogan

Honors Undergraduate Theses

This investigation explores the detonation dynamics of a rotating detonation engine (RDE). Beginning with the general understanding and characteristics of hydrogen and compressed air as a detonation fuel source, this study further develops the experimental approach to incorporating a coal-based fuel mixture in an RDE. There is insufficient prior research investigating the use of coal as part of a fuel mixture and insignificant progress being made to improve thermal efficiency with deflagration. The U.S. Department of Energy's Office of Fossil Energy awarded the Propulsion and Energy Research Laboratory at the University of Central Florida a grant to lead the investigation …

A Novel Approach For Missing Combat Support Aircraft Search Acceleration Using Vtol Uas, Mohammed Ba Zuhair, Wisam Yousef, Issam Samara, Vladislav Varsegov

International Journal of Aviation, Aeronautics, and Aerospace

In this paper, an approach to accelerate search operations for a missing combat support aircraft using a portable waterproof autonomous vertical takeoff and landing unmanned aerial system called “flying locator beacon” is described. The latter is connected with both flight data and cockpit voice recorders with a parallel bus and may be deployed from the empennage during extreme emergency scenarios, which is detected when few flight parameters are overrun leading to an air crash stimulating behavior. Landing of the flying locator beacon strictly takes place on global latitude and longitude coordinates only of integer values enabling significant minimization of search …

Damage Characterization Of Aircraft Fuselage Using Vibrothermography Technique-Review And Analysis, Abbasali Saboktakin

International Journal of Aviation, Aeronautics, and Aerospace

Vibrothermogrphy is a promising non-destructive technique that uses ultrasonic elastic waves to detect damages and is typically applied in the aerospace and automotive industries. This technique allows for defect selective imaging using thermal waves that are generated by ultrasound waves. In this paper, vibrothermography technique was applied to the aircraft fuselage to detect its damage. The influence of the damage on the temperature distribution at the damage region on the aluminum was investigated by finite element technique. Comprehensive understanding in edge crack in fuselage heating caused by local friction between crack surfaces was obtained.

Dust Control Examination Using Computational Fluid Dynamics Modeling And Laboratory Testing Of Vortecone And Impingement Screen Filters, Ashish R. Kumar

Theses and Dissertations--Mining Engineering

Heavy industries, such as mining, generate dust in quantities that present an occupational health hazard. Prolonged exposure to the respirable dust has been found to result in many irreversible occupational ailments in thousands of miners. In underground mining applications, a variety of scrubbing systems are used to remove dust near the zones of generation. However, the wire-mesh type fibrous screens in the flooded-bed dust scrubbers used on continuous miners, are prone to clogging due to the accumulation of dust particles. This clogging results in a reduced capture efficiency and a higher exposure to the personnel. This research establishes the Vortecone, …

Compressible Turbulent Flame Speed Of Highly Turbulent Standing Flames, Jonathan Sosa

Electronic Theses and Dissertations

This work presents the first measurement of turbulent burning velocities of a highly-turbulent compressible standing flame induced by shock-driven turbulence in a Turbulent Shock Tube. High-speed schlieren, chemiluminescence, PIV, and dynamic pressure measurements are made to quantify flame-turbulence interaction for high levels of turbulence at elevated temperatures and pressure. Distributions of turbulent velocities, vorticity and turbulent strain are provided for regions ahead and behind the standing flame. The turbulent flame speed is directly measured for the high-Mach standing turbulent flame. From measurements of the flame turbulent speed and turbulent Mach number, transition into a non-linear compressibility regime at turbulent Mach …

Development Of An Indoor Multirotor Testbed For Experimentation On Autonomous Guidance Strategies, Kidus Guye

Electronic Theses and Dissertations

Despite the vast popularity of rotary wing unmanned aerial vehicles and research centres that develop their guidance software, there are only a limited number of references that provide an exhaustive description of a step-by-step procedure to build-up a multirotor testbed. In response to such need, the first part of this thesis aims to describe, in detail, the complete procedure to establish and operate an autonomous multirotor unmanned aerial vehicle indoor experimental platform to test and validate guidance, navigation and control strategies. Both hardware and software aspects of the testbed are described to offer a complete understanding of the different aspects. …

Single Camera Photogrammetry Matlab Solver Developed For Automation Of The Oil Interferometry Process, Hunter Michael Dunn

Master's Theses

Over the last 20 years, Gregory G. Zilliac of the NASA AMES Research Center has been in continuous development of a fringe-imaging skin friction PC application used in oil interferometry analysis. This application, CXWIN5G, allows users to analyze propagation of oil smears across an aerodynamic surface using photogrammetry. The purpose of this thesis is to investigate the feasibility of increasing the level of automation currently found in CXWIN5G by developing a MATLAB solver capable of determining oil smear geometry with minimal user input.

There are two main automation goals of this thesis that are reflected in the core of the …

Simulation Of Non-Premixed Ethylene-Air Crossflow Jet Flame, Jennifer Onyinye Chikelu

Electronic Theses and Dissertations

Computational fluid dynamics tool has been employed in the past to determine and analyze efficiency or performance in combustion engines and for combustion analysis. This paper represents a systematic investigation on the best model predicts the temperature and soot production in coflow jet flame, by applying various RANS turbulent model, soot models and radiation models in presence or absence of gravity. It also applies this model predicted in crossflow jet flame and investigates the velocity ratio (ratio of the velocity of fuel jet to the velocity of air stream) variation effect on temperature and soot production. ANSYS-Fluent CFD software tool …

Iact Undergraduate Certificate In Applied Creativity (Year 1 - 2018), Brian Laduca

IACT Certificate Program

At the Institute of Applied Creativity for Transformation (IACT) at ArtStreet, we seek to empower a creatively confident 21st-century student with the ability to discover, invent and innovate ambiguous ideas through a disruptive design process that will impact today’s ever-changing global world regardless of degree focus.

IACT is home to the nation’s first undergraduate certificate in Applied Creativity for Transformation. Open to undergraduate students of any major, the certificate is a first step in achieving the University of Dayton’s vision of innovation, applied creativity, entrepreneurship and community engagement for the common good.

Development Of Ceramic 3d Printer Using Cold-Based Extrusion, Noah Naden

Summer Community of Scholars Posters (RCEU and HCR Combined Programs)

No abstract provided.

Radiation Effects In Tantalum Oxide-Based Resistive Memory Devices, Joshua Stuart Holt

Legacy Theses & Dissertations (2009 - 2024)

There is an increasing need for radiation-hardened electronics as space programs grow in number and scope. Scientific interest in long-term exploration, particularly in high-radiation environments such as Europa, as well as commercial interest in establishing permanent outposts, requires high tolerance of radiation effects. A flash memory device might survive for several years in low Earth orbit, but only a few days in orbit around Europa due to the extremely high levels of radiation encountered there. Meanwhile, commercial interests, including asteroid mining and building a base on the moon or Mars would require electronic systems that could survive for long periods …

Mechanical Wear Debris Feature, Detection, And Diagnosis: A Review, Wei Hong, Wenjian Cai, Shaoping Wang, Mileta M. Tomovic

Engineering Technology Faculty Publications

Mechanical debris is an important product of friction wear, which is also a crucial approach to know the running status of a machine. Many studies have been conducted on mechanical debris in related fields such as tribology, instrument, and diagnosis. This paper presents a comprehensive review of these studies, which summarizes wear mechanisms (e.g., abrasive wear, fatigue wear, and adhesive wear) and debris features (e.g., concentration (number), size, morphology, and composition), analyzes detection methods principles (e.g., offline: spectrograph and ferrograph, and online: optical method, inductive method, resistive-capacitive method, and acoustic method), reviews developments of online inductive methods, and investigates the …

Effects Of Terrain-Based Altimetry On Navigation Performance, Kenneth Michael Kratzer

Masters Theses

"Navigation filters used during an entry, descent, and landing scenario often receive measurements related to the terrain over which the vehicle is traversing. Models of the terrain can be presented in varying degrees of fidelity, providing increasingly realistic and accurate models of the surface. While it is ideal to provide the filter with the most realistic model possible, the performance is limited by the strict nature of the real time scenario. Therefore, it is of interest to determine what level of fidelity is necessary to achieve an accurate filtering solution. Determining how best to incorporate terrain-related data into navigation solutions …

Developing Computational Models For Pulsed-Inductive Plasma Formation, Zachary Aaron Gill

Masters Theses

"Pulsed-inductive discharges are a common method of producing a plasma. They provide a mechanism for quickly and efficiently generating a large volume of plasma for rapid use and are seen in applications including propulsion, fusion power, and high-power lasers. However, some common designs see a delayed response time due to the plasma forming when the magnitude of the magnetic field in the device is at a minimum. New designs are difficult to evaluate due to the amount of time needed to construct a new geometry and the high monetary cost of changing the power generation circuit. To more quickly evaluate …