Engineering Commons^™

Launch Vehicle Design For The Far-Mars Competition, Matthew Boban, Bryce Smoldon, Jonathan Noble, Stefan Johnson, Maxwell Kauker, Nicholas Wright, Andrew Lucka

Discovery Day - Prescott

Zenith Propulsion is constructing a launch vehicle, named Altair, to compete in a competition hosted by the Friends of Amateur Rocketry (FAR) and the Mars Society. The objective for Zenith Propulsion is to design, build and launch Altair to a qualifying altitude of 30,000 feet in the FAR-Mars competition. Altair will utilize a rocket engine that has been in development at Embry-Riddle Aeronautical University’s Prescott campus since late 2018. This engine, named Janus, uses liquid oxygen and Jet-A and is designed to deliver 1000 lbf of thrust. Altair will be launched from the FAR launch site, in Mojave, CA, on …

Space And Defense – Volume Eleven – Number One – Spring 2019, Space And Defense Journal

Space and Defense

No abstract provided.

Space And Defense – Volume Nine – Number One – Spring 2016, Space And Defense Journal

Space and Defense

No abstract provided.

Space And Defense – Volume Eight – Number One – Spring 2015, Space And Defense Journal

Space and Defense

No abstract provided.

Space And Defense – Volume Seven – Number One – Winter 2014, Space And Defense Journal

Space and Defense

No abstract provided.

Space And Defense – Volume Six – Number One – Fall 2012, Space And Defense Journal

Space and Defense

No abstract provided.

Space And Defense – Volume Five – Number One – Summer 2011, Space And Defense Journal

Space and Defense

No abstract provided.

Space And Defense – Volume Four – Number Two – Summer 2010, Space And Defense Journal

Space and Defense

No abstract provided.

Space And Defense – Volume Four – Number One – Winter 2010, Space And Defense Journal

Space and Defense

No abstract provided.

Space And Defense – Volume Three – Number Two – Fall 2009, Space And Defense Journal

Space and Defense

No abstract provided.

Space And Defense – Volume Three – Number One – Summer 2009, Space And Defense Journal

Space and Defense

No abstract provided.

Space And Defense – Volume Two – Number Three – Winter 2009, Space And Defense Journal

Space and Defense

No abstract provided.

Space And Defense – Volume Two – Number Two – Winter 2008, Space And Defense Journal

Space and Defense

No abstract provided.

Space And Defense – Volume Two – Number One – Winter 2008, Space And Defense Journal

Space and Defense

No abstract provided.

Object Detection With Deep Learning To Accelerate Pose Estimation For Automated Aerial Refueling, Andrew T. Lee

Theses and Dissertations

Remotely piloted aircraft (RPAs) cannot currently refuel during flight because the latency between the pilot and the aircraft is too great to safely perform aerial refueling maneuvers. However, an AAR system removes this limitation by allowing the tanker to directly control the RP A. The tanker quickly finding the relative position and orientation (pose) of the approaching aircraft is the first step to create an AAR system. Previous work at AFIT demonstrates that stereo camera systems provide robust pose estimation capability. This thesis first extends that work by examining the effects of the cameras' resolution on the quality of pose …

Signal Quality Monitoring Of Gnss Signals Using A Chip Shape Deformation Metric, Nicholas C. Echeverry

Theses and Dissertations

The Global Navigation Satellite System continues to become deeply em-bedded within modern civilization, and is depended on for confident, accurate navigation information. High precision position and timing accuracy is typically achieved using differential processing, however these systems provide limited compensation for distortions caused by multi-path or faulty satellite hardware. Signal Quality Monitoring (SQM) aims to provide confidence in a receivers Position, Navigation, and Timing solution and to offer timely warnings in the event that signal conditions degrade to unsafe levels. The methods presented in this document focus on implementing effective SQM using low-cost Commercial Off-the-Shelf equipment, a Software Defined Radio, …

Relational Database Design And Multi-Objective Database Queries For Position Navigation And Timing Data, Sean A. Mochocki

Theses and Dissertations

Performing flight tests is a natural part of researching cutting edge sensors and filters for sensor integration. Unfortunately, tests are expensive, and typically take many months of planning. A sensible goal would be to make previously collected data readily available to researchers for future development. The Air Force Institute of Technology (AFIT) has hundreds of data logs potentially available to aid in facilitating further research in the area of navigation. A database would provide a common location where older and newer data sets are available. Such a database must be able to store the sensor data, metadata about the sensors, …

Alternate Materials For High-Speed Projectile Casing, Andrew W. Beard

Theses and Dissertations

A high-speed projectile impact is a highly complex dynamic problem that can be simplified with the use of finite element analysis solvers. Abaqus/Explicit was used to evaluate the impact of various projectiles using a plane strain setup. Using a baseline stainless steel projectile, the proposed sandwich construction design was analyzed and compared to the baseline projectile. The overall goal was to see if a new composite casing could perform similarly to the simple baseline projectile. The sandwich construction used stainless steel, tungsten, and silicon-carbide reinforce aluminum as outer and inner shell materials. The core material was created using additive manufacturing …

Investigation Of Ultem 9085 For Use In Printed Orbital Structures, William R. Gallagher

Theses and Dissertations

Additive manufacturing is revolutionizing industries ranging from medicine to space. However, the structural characteristics of plastic parts created by these methods are not as well understood as their more established counterparts. This research explored two relevant areas: how the structural characteristics of ULTEM 9085 plastic behaved after exposure to orbital conditions and the design of the cross-sectional area of a beam to be 3-D printed in microgravity based on the expected loads from the printer. To study orbital effects, ULTEM 9085 was printed into 1/4th scale ASTM D638- 14 dogbones using a Stratasys 450mc printer. These dogbones were placed in …

Timely Near-Optimal Path Generation For An Unmanned Aerial System In A Highly Constrained Environment, Kyle J. Matissek

Theses and Dissertations

A current challenge in path planning is the ability to efficiently calculate a near-optimum path solution through a highly-constrained environment in near-real time. In addition, computing performance on a small unmanned aerial vehicle is typically limited due to size and weight restrictions. The proposed method determines a solution quickly by first mapping a highly constrained three-dimensional environment to a two-dimensional weighted node surface in which the weighting accounts for both the terrain gradient and the vehicle's performance. The 2D surface is then discretized into triangles which are sized based upon the vehicle maneuverability and terrain gradient. The shortest feasible path …

Flight Characteristic Verification Of The Variable Camber Compliant Wing, Sharee B. Acosta

Theses and Dissertations

Morphing wing technology gives aircraft the ability to change wing shape to control the aircraft and flight performance characteristics. AFIT, AFRL and USU Aero Lab have collaborated to design and test a variable camber compliant wing (VCCW) on a small unmanned aerial vehicle (UAV). Flight tests demonstrated the wing performance and provided data to refine a VCCW flight simulator. Work was completed with the USU AeroLab-generated MachUp and the actual flight data to improve the simulator to provide results close to those of the actual flight test. The research provides a tool to reduce time and cost for future flight …

Space And Defense – Volume One – Number One – Fall 2006, Space And Defense Journal

Space and Defense

No abstract provided.

Avia 201 Project 1 Windtunnel Lab Form Ver 1.20 20200323, Nihad E. Daidzic

Aviation Department Publications

To introduce aviation/aeronautics/aerospace students to wind tunnel(s) and methods used in experimental identification of various aerodynamic (and stability) coefficients of airfoils (2D), wings (3D) and scale models.

Proper Orthogonal Decomposition And Recurrence Map For The Identification Of Spatial–Temporal Patterns In A Low-Re Wake Downstream Of Two Cylinders, Meihua Zhang, Zhongquan Charlie Zheng, Huixuan Wu

Mechanical and Aerospace Engineering Faculty Publications

Flow decomposition methods provide systematic ways to extract the flow modes, which can be regarded as the spatial distribution of a coherent structure. They have been successfully used in the study of wake, boundary layer, and mixing. However, real flow structures also possess complex temporal patterns that can hardly be captured using the spatial modes obtained in the decomposition. In order to analyze the temporal variation of coherent structures in a complex flow field, this paper studies the recurrence in phase space to identify the pattern and classify the evolution of the flow modes. The recurrence pattern depends on the …

Development And Testing Of Novel Antimicrobial Materials For Additive Manufacturing With Application In Space, Michael Thompson, Jorge Zuniga, Christopher Copeland, Roberto Saavedra, Claudia Cortes Reyes, Andres Acuña Velásquez, Daniel Martínez Pereira, Claudio Soto

UNO Student Research and Creative Activity Fair

PURPOSE: The purpose of the study was twofold: (i) develop and test the antimicrobial properties of a polylactic acid- and a polyurethane-based filament, and (ii) use these filaments to manufacture a socket-based prosthesis to verify printability and longevity of the antimicrobial properties. It was hypothesized that the formulation of a novel biocidal copper-based nanocomposite with a biocompatible 3D printing polymer/copolymer can be used for the development of antimicrobial medical devices to mitigate microbial risks during long space flight missions [1, 2, 3].

METHODS: Polylactic Acid-based Filament Development-The development of a polylactic acid-based filament involved several processes, such as fermentation …

2020 Oklahoma Research Day Full Program, Southwestern Oklahoma State University

Oklahoma Research Day Abstracts

No abstract provided.

Magslam: Aerial Simultaneous Localization And Mapping Using Earth's Magnetic Anomaly Field, Taylor N. Lee, Aaron J. Canciani

Faculty Publications

Instances of spoofing and jamming of global navigation satellite systems (GNSSs) have emphasized the need for alternative navigation methods. Aerial navigation by magnetic map matching has been demonstrated as a viable GNSS‐alternative navigation technique. Flight test demonstrations have achieved accuracies of tens of meters over hour‐long flights, but these flights required accurate magnetic maps which are not always available. Magnetic map availability and resolution vary widely around the globe. Removing the dependency on prior survey maps extends the benefits of aerial magnetic navigation methods to small unmanned aerial systems (sUAS) at lower altitudes where magnetic maps are especially undersampled or …

Student Learning And Retention Using A Flight Training Device: A Case Study, Adeel Khalid

National Training Aircraft Symposium (NTAS)

Student learning and retention as a function of the mode of teaching is analyzed in this study. Different groups of students receive information about aircraft flight operations either via lecture, through directed study, a combination of the two or through a pre-recorded flight demonstration video. Their level of learning is assessed by evaluating how well they fly an aircraft and perform a predefined mission using a flight simulator. Scores of different groups are compared qualitatively and quantitatively and students are surveyed after the flight. It is hypothesized that students that learn through watching a demonstration video and have the ability …

Nothing But A Number: A Closer Look At Stall Speed, Nihad E. Daidzic

Aviation Department Publications

CFIS REPEAT IT LIKE A MANTRA: An airplane can stall at any airspeed, in any pitch attitude. Your trainer’s wing always stalls when it exceeds its critical angle of attack—and that can happen even if the airplane is pointed straight down and approaching VNE. So what do the stall speeds published in the pilot’s operating handbook mean? These only apply for the stated conditions: often level flight, maximum gross weight, and most forward center of gravity, with flaps retracted (VS1) or in the landing configuration (VS0). Factors such as total weight, load factor, power, and center of gravity location affect …

Multifidelity Modeling By Polynomial Chaos-Based Cokriging To Enable Efficient Model-Based Reliability Analysis Of Ndt Systems, Xiaosong Du, Leifur Leifsson

Mechanical and Aerospace Engineering Faculty Research & Creative Works

This work proposes a novel multifidelity metamodeling approach, the polynomial chaos-based Cokriging (PC-Cokriging). The proposed approach is used for fast uncertainty propagation in a reliability analysis of nondestructive testing systems using model-assisted probability of detection (MAPOD). In particular, PC-Cokriging is a multivariate version of polynomial chaos-based Kriging (PC-Kriging), which aims at combining the advantages of the regression-based polynomial chaos expansions and the interpolation-based Kriging metamodeling methods. Following a similar process as Cokriging, the PC-Cokriging advances PC-Kriging by enabling the incorporation of multifidelity physics information. The proposed PC-Cokriging is demonstrated on two analytical functions and three ultrasonic testing MAPOD cases. The …