Architectural Engineering Commons^™

Preliminary Bond Capacity Exploration Between Monolayer Graphene And Cementitious Composites, Yanping Zhu, Chuanrui Guo, Genda Chen

Civil, Architectural and Environmental Engineering Faculty Research & Creative Works

This Study Aims to Explore Bond Capacity between Monolayer Graphene and Cementitious Composites for the First Time through a Pullout Test. the Low-Pressure Chemical Vapor Deposition Method Was Used to Synthesize Monolayer Graphene on the Copper Substrate to Be Embedded in the Mortar Made by the Briquette Mold. the Bond Capacity between Them Was Higher Than the Tensile Strength of the Copper Sheet with As-Grown Monolayer Graphene on the Surface Since All Specimens Failed in Fracture with Embedment Length of More Than 30 Mm. the Monolayer Graphene Enhanced the Copper Tensile Fracture Stress and Normalized Energy during the Test as …

Sustainability In Concrete Masonry With Natural Pozzolans, Ceiley L. Davis

Architectural Engineering: Graduate Reports

To achieve greater sustainability in masonry construction for the Western market it is common to replace masonry grout's partial cement content with waste pozzolans. As waste pozzolans are in limited supply, as the coal burning market in the West diminishes, this research investigates viable grout mixtures which replace cement with Natural Pozzolans, a more plentiful sustainable replacement. The present work investigated the percentage of Natural Pozzolans that can be partially substituted for cement for grout mixtures to achieve an axial compressive strength of 2000psi within 28 and 56 days of curing. To determine efficacy per ASTM 476-22, “Standards Specifications for …

Xenabloom, Sophia Maglabe, Ryer Lauth, Elizabeth Shaw, Sheyna Rongong

Architectural Engineering

Proposal for an architectural and structural design of a shade structure at the Leaning Pine Arboretum, employing the Xenaform typology of Poly Shells, LLC.

Investigation Of Natural Pozzolans: Analyzing The Practicality Of Natural Pozzolans As A Partial Substitute For Cement In Grout Production, Jadyn I. Breien, Andrew J. Baro, Logan T. Marino

Architectural Engineering

This senior project aims to investigate whether natural pozzolans are more sustainable than fly ash and a sufficient substitute for cement in the production of grout. By following the intent of the ASTM (American Society of Testing and Materials) standards, a conclusion will be made to determine if natural pozzolans can contribute comparable strength in compression. The objective is to prove that natural pozzolans should be utilized in the production of grout rather than alternatives such as fly ash because it can provide similar strength while being more economical and more sustainable.

The Center For Centering Dome, Olek Piechaczek, Ryan M. Scharf

Architectural Engineering

The Center for Centering seeks to create a large-scale healing center, conducive to individual centering of the mind and body. This mobile installation provides a relaxing, enclosed space while still maintaining a connection to the outdoors. The clients liked the idea of having a pop-up installation that could be easily set up as a touring display. With a deadline for installation looming in June 2022, a team of students had five months to design and manufacture the structure.

In winter 2022, the students developed custom geometry to minimize the number of individual parts and built a ¼ scale model of …

Attainable And Sustainable Home Building Solutions, Katrina Matthews

Construction Management

Sustainability has fortunately been a recent concern in the construction industry as climate change continues to impose potentially insurmountable threats to the global environment. Although many new methods have been adopted in efforts to lessen the adverse environmental effects of construction-related activities, as a society, we still have much room for growth as the built environment accounts for almost 50% of global emissions. Many changes and standards must be adopted to make these solutions efficiently beneficial. To set industry standards, we must start with the most basic form of construction- residential building. This report covers two attainable framing solutions for …

Development Of The New Hasslein Caed Collaborative, Catie Dines

Construction Management

This paper outlines the development and execution of the new Hasslein CAED Collaborative student competition which engages students of all five majors in the College of Architecture and Environmental Design in a Request for Proposal style competition. CAED houses students studying Architecture, Architectural Engineering, City and Regional Planning, Construction Management, and Landscape Architecture. There is little opportunity for interdisciplinary collaboration within the CAED, despite our future career paths being heavily intertwined. This competition followed research by Greta Stout, class of 2022, on the benefits and support of interdisciplinary collaboration at Cal Poly SLO in CAED. The competition is named after …

Floating Dock At Santa Rita Ranch: A Design And Cost Estimate Package Prepared For The Land Conservancy Of San Luis Obispo, Sophia Ann Federico

Construction Management

The purpose of this project is to provide the Land Conservancy of San Luis Obispo with three design options for a floating fishing/boat dock system that they want to build on a small lake located on a plot of land that they own and preserve called Santa Rita Ranch. The design package that I created includes drawings, weight and buoyancy calculations, a cost estimate, and product specs. My approach was to utilize my estimating skills that I have acquired from my construction management classes and from my work at a general contractor’s office in the preconstruction department. The design and …

Sky Survey Radio Telescope, Jack E. Mcguigan

Electrical Engineering

This document outlines the design of a radio telescope designed to perform hydrogen line sky surveys. The telescope produces radio images mapping the intensity and relative velocities of hydrogen concentrations to their sky coordinates. Over the course of a day, the telescope images the regions of space visible to it, allowing sky survey imagery to be updated daily. Sky survey images are comprised of an array of pixels corresponding to specific sky coordinates. Each 8-bit RGB pixel contains information on the concentrations of hydrogen in the brightness and relative velocity in the color. Radio images mapping the concentrations and velocities …

Out-Of-Plane Flexural Behavior Of Insulatedwall Panels Constructed With Large Insulation Thicknesses, Jacob Luebke, Fray F. Pozo-Lora, Salam Al-Rubaye, Marc Maguire

Durham School of Architectural Engineering and Construction: Faculty Publications

Insulated concrete sandwich wall panels (ICSWPs) are gaining popularity as energy regulations become stricter worldwide. ICSWPs are now being constructed with thinner wythes and thicker insulation to keep up with the changing market, which is reducing material costs and increasing thermal and structural efficiency. However, there is a need for adequate experimental testing to validate the current design methods for these new panels. This research aims to provide that validation by comparing the predictions of four different methods with experimental data obtained from six large-scale panels. The study found that while current design methods adequately predict the behavior of thin …

Using Bim To Increase The Efficiency Of Energy-Driven Retrofitting Projects, Anne Grego, Shannon Chance, Barry Mcauley

Conference Papers

The building sector is responsible for nearly 40% of global energy consumption. Many existing buildings have poor thermal insulation and low energy performance, hindering sustainability goals. Energy-driven building retrofitting could address this issue and implementing Building Information Modelling (BIM) in retrofitting can reduce process time, costs, and waste associated with such undertakings. Yet, there is a lack of research and insufficient guidance for implementing BIM in energy-driven retrofitting. A BIM framework is presented to enhance decision-making processes during retrofitting. The aims of this study were to (1) identify BIM technologies and methodologies that could address existing barriers and improve efficiency …

3d Printing Of Earthen Materials: Toward The Carbon-Zero Construction, Shiva Bhusal

Civil Engineering ETDs

In recent years, digital manufacturing techniques in the architecture and construction industry have rapidly gained attention, especially with 3D printing, also called additive manufacturing. The use of cement has been common in modern construction and is now being explored for 3D printing. However, due to cement's contribution to approximately 7 percent of global carbon emissions and its high cost, research on sustainable and greener materials has gained attention. Previous studies on alternative construction have examined the mechanical and rheological properties of soil mixes, but not much attention has been given to printability evaluation, shrinkage, and cracking, which can affect the …

Predicting The Friction Coefficient Of High-Friction Surface Treatment Application Aggregates Using The Aggregates' Characteristics, Ahmed S. El-Ashwah, Korrenn Broaddus, Magdy Abdelrahman

Civil, Architectural and Environmental Engineering Faculty Research & Creative Works

Providing Sufficient Pavement Surface Friction (I.e., Skid Resistance) between Vehicle Tires and Pavement Surface throughout the Pavement Service Life is Considered to Be One of the Main Objectives of Highway Design. Moreover, Vehicle Safety, the Amount of Consumed Fuel, and the Wearing Rate of Vehicle Tires Generally Are Influenced by Pavement Surface Friction. in This Study, a Comprehensive Experimental Testing Program Was Conducted on Different Aggregate Sources, Including Calcined Bauxite and Five Alternative Local Sources, to Assess their Friction Characteristics. the Testing Program Included a British Pendulum Tester (BPT) and a Dynamic Friction Tester (DFT), Which Were Used to Evaluate …

Rilem Tc 266-Mrp: Round-Robin Rheological Tests On High Performance Mortar And Concrete With Adapted Rheology—Rheometers, Mixtures And Procedures, Dimitri Feys, Mohammed Sonebi, Sofiane Amziane, Chafika Djelal, Khadija El-Cheikh, Shirin Fataei, Markus Greim, Irina Ivanova, Helena Keller, Kamal Khayat, Laurent Libessart, Viktor Mechtcherine, Ivan Navarrete, Arnaud Perrot

Civil, Architectural and Environmental Engineering Faculty Research & Creative Works

Recent developments in understanding the rheology of mortar and concrete as well as applying this understanding in the practice of construction necessitate an accurate assessment of materials' rheological properties. It is well known that different rheometers for mortar and concrete deliver different results, as this was shown over 15 years ago in two measuring campaigns comparing concrete rheometers. Considering newly developed rheometers, including those to evaluate interface rheology and structural build-up at rest, as well as additional measurement procedures and data interpretation techniques, a new comparison campaign was carried out in 2018 at the Université d'Artois, in Bethune, France. This …

Characterizing Energy Dissipation Of Shallow-Water Wave Breaking In A Storm Surge, Hunter Boswell, Guirong Grace Yan, Wouter Mostert

Civil, Architectural and Environmental Engineering Faculty Research & Creative Works

While understanding breaking waves is crucial for the development of parametrizations used in ocean wave modeling for both deep and shallow water, the complete process of wave breaking is not well understood. Here we present direct numerical simulations of two-dimensional solitary waves that shoal and break on a uniform beach in shallow water, with the presence of storm surge represented by an inshore region. The storm surge depth, beach slope, and wave amplitude are varied to study the dependence of energy dissipation in the breaker on wave and bathymetric parameters. We classify wave breaker types and find a separation between …

Slo Botanical Garden Deck, Noah E. Demer

Architectural Engineering

This project consists of the design and construction of an outdoor-use deck. This deck is to be located in the NE corner of the Sage Meadow at the San Luis Obispo Botanical Garden at 3450 Dairy Creek Rd, San Luis Obispo, CA 93405. This deck’s intended use is as a gathering area for people to congregate. Originally, the ideal deck area was proposed as 700+ square feet, but with further site and project limitations the final design was ~480 square feet. This deck has not been constructed.

The Bridge Newsletter Spring 2023, Missouri University Of Science And Technology

The Bridge Newsletter

-Virtual reality in architectural engineering
-Steel Bridge team wins fifth consecutive competition
-S&T Volleyball star ‘jumps’ at research opportunity
-Benavides legacy continues

Remote Alignment Fixing Device With Vizir Marks In Base Lcd Indicator, Nodirbek Rustambekovich Yusupbekov, Zahidov Muratovich Nematjon

Chemical Technology, Control and Management

The article substantiates the needs to increase the level of automation of methods and geodetic support of geometric parameters during the construction of buildings and structures. In particular, the method of alignment measurements is considered. This is widely used in determining deviations from the straightness and alignment of the installation of elements in engineering building structures, including hydraulic structures, as well as in the control of process equipment installations, rolling mills, conveyor lines, crane tracks, when monitoring precipitation. and deformations of techno objects. One of the methods of alignment measurements with the use of a visual-optical device – aliniometer and …

Energy Efficient Integrated Mems Neural Network For Simultaneous Sensing And Computing, Hamed Nikfarjam, Mohammad Megdadi, Mohammad Okour, Siavash Pourkamali, F. M. Alsaleem

Durham School of Architectural Engineering and Construction: Faculty Publications

Biological systems seamlessly combine multiple functions in lightweight and energy-efficient structures. Such capability in synthetic structures would be desirable in numerous engineering applications such as aerospace, robotics and wearable devices. Here we report an integrated silicon-based structure configured to sense, perform different classification algorithms, and produce an action signal within the same physical layer. The algorithms are coded in the mechanical responses of the sensing elements of multiple coupled micro-electromechanical systems (MEMS), simultaneously capturing acceleration measurements to produce an actuated signal. This all-in-one structure operates with zero circuitry and low power consumption. As a demonstration, we designed and fabricated a …

A Unified Two Independent Stress Variable Approach To Moisture-Change-Induced Unsaturated Soil Volume Change, Sandra Houston, Xiong Zhang

Civil, Architectural and Environmental Engineering Faculty Research & Creative Works

In 1968, Matyas and Radhakrishna introduced the concept of the state surface, demonstrating that unsaturated soil volume change is dependent on two independent stress state variables, net total stress and suction. For decades the basic theory of unsaturated soils has been known, and a holistic view of the elastoplastic response of unsaturated soils, based on a modified state surface approach (MSSA), makes it clear that a method accounting for independent roles of net total stress and suction is required to quantify volume change of unsaturated soils. Still, reliance on pre-unsaturated-soil-mechanics-era methods persists, particularly within the geotechnical practice community. Unsaturated soil …

Calibration Of Bbm Parameters Using The Modified State Surface Approach, Xiong Zhang, Beshoy Riad, Eduardo E. Alonso

Civil, Architectural and Environmental Engineering Faculty Research & Creative Works

The Barcelona Basic Model (BBM) developed by Alonso et al. [1] is the first and the mostwidely used elasto-plastic model for unsaturated soils. The BBM successfully explained many key features of unsaturated soils and received extensive acceptance. However, there is lack of a well-establishedmethod for selecting parameter values for the BBM from laboratory tests, although a variety of methods have been recently developed for calibrating model parameters for the BBM. Concerns still exist on the correctness and robustness of such parameter value selection procedures. The above statements were evidenced by a recent benchmark exercise on selection of parameter values for …

Lunar In-Situ Aluminum Production Through Molten Salt Electrolysis (Lisap-Mse), Jacob Ortega, Jeffrey D. Smith, Fateme Rezaei, David Bayless, William P. Schonberg, Daniel S. Stutts, Daoru Frank Han

NASA-Missouri Space Grant Consortium

The goal of Artemis is to establish a sustained presence on the Moon. To achieve so, numerous resources are necessary. The Moon contains several essential elements needed to sustain human presence. Most of those elements are trapped in the form of minerals. To refine those minerals into useful materials, reduction methods are needed. Most reduction methods on Earth require large amounts of mass and power which is unrealistic for early stages of building a lunar base. To solve this problem, we are developing a concept of Lunar In-Situ Aluminum Production through Molten Salt Electrolysis (LISAP-MSE).

The LISAP-MSE project, if successful, …

Earthquake Resistant Buildings, Admin Stem For Success

STEM for Success Showcase

Students learn about earthquakes and engineering by building a structure that can survive an earthquake.

Reconfigurable Metatiles With Circular Maze-Like Space-Coiling-Based Acoustic Metastructure For Low-To-Mid Frequency Sound Attenuation, Sanjay Kumar, Heow Pueh Lee

Durham School of Architectural Engineering and Construction: Faculty Publications

This study presents a compact, lightweight, and reconfigurable acoustic metatile for sound mitigation applications. The metatile prototype is designed based on a circular maze-like acoustic metastructure, which utilizes a space-coiling technique for enhanced acoustic performance in low-to-mid frequencies. The proposed labyrinthine acoustic metadisk structure comprises a central hollow front face sheet and two coiling-up backing cavities. Experimental results show that the metadisk has high absorption peaks of 0.81 and 0.75 at 574 and 1436 Hz, respectively, and exhibits high sound transmission loss (STL) values (≥25 dB) in separate wide frequency bands between 100–580 Hz and 820–1600 Hz. Based on the …

Structural Testing Of Concrete Walls On-Edge With Combined Axial And Out-Of-Plane Loading, Salam Al-Rubaye, Marc Maguire

Durham School of Architectural Engineering and Construction: Faculty Publications

Full-scale testing of structural components can be time consuming and difficult. The design of full- scale slender concrete walls is highly influenced and controlled by second-order and out-of-plane bending loads. Previous experiments on out-plane bending of slender walls and insulated walls have been performed with bending in the direction of gravity (with or against). Additionally, most of the research considering out-of-plane bending does not include an axial load and suffers from inaccurate results due to not simulating the actual loading and constraining conditions or safety issues. This testing method was developed expressly for the determination of slender wall behavior in …

Performance Assessment Of Bioasphalt Mixtures Containing Guayule Resin As An Innovative Biobased Asphalt Alternative, Ahmed Hemida, Magdy Abdelrahman

Civil, Architectural and Environmental Engineering Faculty Research & Creative Works

Guayule resin was investigated through mixture to assess its role in the field performance. For performance comparisons, conventional asphalt, neat guayule, asphalt-rubber-guayule, and guayule-rubber binders were implied. Field-simulated lab mixtures were made to investigate the major distresses. Modified Lottman, rut, semicircular bending, and disk-shaped compact tension tests were used to assess stripping, rutting, fatigue, and thermal cracking resistances. Stripping and rutting susceptibilities were also assessed by Hamburg wheel-tracking test. The outcomes disclosed that when the modified Lottman test was used, guayule containing a 7% air content was more susceptible to stripping than that containing a 3.5% air content, resulting in …

Discrete-Element Modeling Of Shear-Induced Particle Migration During Concrete Pipe Flow: Effect Of Size Distribution And Concentration Of Aggregate On Formation Of Lubrication Layer, Tooran Tavangar, Masoud Hosseinpoor, Jeffrey S. Marshall, Ammar Yahia, Kamal Khayat

Civil, Architectural and Environmental Engineering Faculty Research & Creative Works

The Paper Seeks to Better Understand the Particulate Mechanics Giving Rise to the Lubrication Layer (LL) in Flows with Wide Particle-Size Distributions (PSD) Typical of Concrete Pumping Applications. the Study Uses a Soft-Sphere Discrete Element Method (DEM) to Simulate the Shear-Induced Particle Migration (SIPM) Mechanism of Formation of the LL. to Provide Realistic Understanding of SIPM and Rheological Heterogeneity of Concrete, Three Wide PSDs (Fine, Medium, and Coarse) and Three Different Concentrations (10 %–40 %) of Five Spherical-Particle Subclasses (1–17 Mm Diameter) Were Investigated. the Radial Evolution of Concentration and Particle Distribution Was Simulated over Time and the LL Formation …

Efficient Recycling Of Waste Rubber In A Sustainable Fiber-Reinforced Mortar And Its Damping And Energy Dissipation Capacity, Haodao Li, Wu Jian Long, Kamal Khayat

Civil, Architectural and Environmental Engineering Faculty Research & Creative Works

A Great Number of Waste Tires Are Discarded in Landfills, Occupying Land Resources, and Severely Endangering the Ecosystem. Upcycling These Wastes as Aggregates to Partially Substitute Natural Sand and Develop Structure-Function Integration in Concrete Structures is a Desirable Solution. in This Study, a Sustainable Fiber-Reinforced Rubberized Mortar with Superior Material Damping and Moderate Strength is Developed by Combined Use of Waste Crumb Rubber (WCR) Incorporated at 0, 30%, and 60%, by Volume of Sand, and Polyvinyl Alcohol (PVA) Fiber Added at 0, 0.5%, and 1%, by Volume, in a High-Volume Fly Ash Binder System. Low-Temperature Plasma (LTP) Pre-Treatment of the …

Inter-Wythe Slip Design Criteria For Non-Composite Insulated Walls, Abdelrahman Awawdeh, Fray F. Pozo-Lora, Marc Maguire

Durham School of Architectural Engineering and Construction: Faculty Publications

Non-composite insulated wall connector design is governed by ICC-ES AC320. This standard works entirely in the loading domain, asking the engineer to prevent connector failure due to tension and shear loading. In this paper, the authors discuss additional criteria related to thermal loading and out-of-plane wind loading that create displacement demand in the non-composite connectors. Loads suitable for such analyses are not well defined. Loads are assumed and demonstrated herein and shown to cause significant displacement demand on connectors. Limited non-composite wythe connector testing is available, and some results are presented here. A comparison indicates that outright failure of non-composite …

Closure To "Some Insights On Flow Over Sharp-Crested Weirs Using Computational Fluid Dynamics: Implications For Enhanced Flow Measurement", Joseph M. Sinclair, S. Karan Venayagamoorthy, Timothy K. Gates

Civil, Architectural and Environmental Engineering Faculty Research & Creative Works

No abstract provided.