Architectural Engineering Commons^™

Relationships Between Residence Characteristics And Nursing Home Compare Database Quality Measures, Brian J. Puckett, Erica E. Ryherd, Natalie Manley, Carey S. Ryan

Durham School of Architectural Engineering and Construction: Faculty Publications

Objective: This study evaluated relationships between physical characteristics of nursing home residences and quality-of-care measures.

Design: This was a cross-sectional ecologic study. The dependent variables were 5 Centers for Medicare & Medicaid Services (CMS) Nursing Home Compare database long-stay quality measures (QMs) during 2019: percentage of residents who displayed depressive symptoms, percentage of residents who were physically restrained, percentage of residents who experienced 1 or more falls resulting in injury, percentage of residents who received antipsychotic medication, and percentage of residents who received anti-anxiety medication. The independent variables were 4 residence characteristics: ownership type, size, occupancy, and region …

Analysis Of Eccentrically Loaded Frp Partially Wrapped Reinforced Concrete Columns Subjected To Combined Environmental Erosion, Zhiqiang Gu, Congjie Wei, Chenglin Wu, Danying Gao, Peibo You, Dong Wei

Civil, Architectural and Environmental Engineering Faculty Research & Creative Works

The Behavior of Eccentrically Loaded Fiber Reinforced Polymer (FRP) Partially Wrapped Reinforced Concrete (RC) Columns under Combined Environmental Erosion Was Investigated in This Paper. Circular RC Columns Were Firstly Subjected to Chloride Erosion Where the Target Corrosion Degree (0, 10 %, and 20 %) is Obtained with Externally Applied Current. This Was Then Followed by Partially Strengthening with 2-Ply of Glass Fiber Reinforced Polymer (GFRP) Strips as Well as 50 Freeze–thaw Cycles. Series of Eccentric Compression Tests Were Conducted with Ranging Eccentricities of 0, 5 Mm, 10 Mm, and 15 Mm. for Comparison, the Carbon Fiber Reinforced Polymer (CFRP) Partially …

Design Of Wythe Connectors For Concentrated Out-Of-Plane Loading Of Insulated Walls, Ammar Al-Maabreh, Fray F. Pozo, Marc Maguire

Durham School of Architectural Engineering and Construction: Faculty Publications

Partially composite concrete insulated wall panels must be designed to handle different types of loading, including out-of-plane concentrated loads. Currently, there is a lack of information that describes and helps engineers analyze the mechanics of axial load transfer for insulated wall panels for concentrated out-of-plane loads that may occur from lifting, handling, or floor/roof reactions. Such loading generates axial and shear forces in the wythe connectors, making it important to choose the type and quantity of connectors in the design process. This paper aims to develop a better understanding of out-of-plane point load mechanics on concrete sandwich wall panels. A …

Investigation Of Corrosion Mechanism Of Ribbed Mild Steel Bars Coated With Magnesium Potassium Phosphate Cement Paste, Fan Zhang, John J. Myers, Wenyu Liao, Cun Hui, Hongyan Ma

Civil, Architectural and Environmental Engineering Faculty Research & Creative Works

This Study Investigated the Anti-Corrosion Performance of Magnesium Potassium Phosphate Cement (MKPC) Paste Applied to the Surface of Ribbed Mild Steel Bars – Which Was Exposed to Simulated Accelerated Corrosive Environment. Four Electrochemical Approaches Were Used Including Open-Circuit Potential (OCP), Electrochemical Impedance Spectroscope (EIS), Polarization Resistance (PR) and Potentiodynamic Polarization (PDP) over a Period of 5376 H (224 Days). Moreover, Visual Inspection, Optical Microscope, and Scanning Electron Microscopy (SEM) with Energy Dispersive Spectroscopy (EDS) Were Used to Assess the Extent of Corrosion on the Samples. to Understand the Mechanism of Corrosion Protection of the Coating System, X-Ray Photoelectron Spectroscopy (XPS) …

Effect Of Green Facade On The Urban Microclimate With Different Street Canyon, Aya Mostafa Hassoun, Mary Felix

Architecture and Planning Journal (APJ)

Using simulation tools, this study investigates the effect of green walls (GWs) on the urban heat island (UHI) phenomenon within different street sizes. It can be planted without taking up more area and could enhance the microclimate environment, which is why it has a wide range of use potential in urban areas. Because Mina City has a threat of UHI, it was chosen for this study. The temperature within various street sizes in the research region was evaluated using only software called ENVI-met that simulates climate, and three common scenarios were chosen. In the first experiment, green walls extending over …

Analysis And Design Of Lateral Framing Systems For Multi-Story Steel Buildings, Husam Al Dughaishi, Jawad Al Lawati, Moad Alosta, Shaker Mahmood, Mohamed Faisal Al-Kazee, Nur Izzi Md Yusoff, Abdalrhman Milad

Durham School of Architectural Engineering and Construction: Faculty Publications

This study focused on identifying the most appropriate structural system for multi-story buildings and analyzing its response to lateral loads. The study analyzed and compared the different structural systems to determine the most suitable option. The study aims to utilize three lateral framing systems (moment, braced, and diagrid) in order to investigate which system needs the least amount of steel to meet the design requirements. Thus, in order to determine the estimated steel savings of this system as compared to the moment and braced frames, the four-story and eight-story buildings that are 96' × 96' in the plane and utilize …

Raveling Performance Of Conventional And Rubberized Chip Seal Under Field And Laboratory Traffic Loading, Alireza Pourhassan, Ahmed A. Gheni, Mohamed Elgawady

Civil, Architectural and Environmental Engineering Faculty Research & Creative Works

Raveling, or the Loss of Surface Aggregate, is a Major Concern in Chip Seal Pavement. Previous Studies Have Used the Standard Sweep, Vialit, and Pennsylvania Tests to Evaluate Raveling, But These Tests Do Not Replicate the Stresses of Rolling Vehicle Tires on Chip Seal and Have Produced Inconsistent Results. Additionally, These Tests Mainly Evaluate Early-Stage Raveling Due to their Short Curing Time. in This Study, a Small-Wheel Traffic Simulation Device (SWTS) Was Used to Apply Similar Stresses as Rolling Vehicle Tires and Produce Comparable Raveling Results. This Was Confirmed through a 13-Month Field Observation of Chip Seal, Where the Laboratory …

Photolysis Of 3-Nitro-1,2,4-Triazol-5-One: Mechanisms And Products, Hunter W. Schroer, Esteban Londono, Xueshu Li, Hans Joachim Lehmler, William Arnold, Craig L. Just

Civil, Architectural and Environmental Engineering Faculty Research & Creative Works

Insensitive munitions formulations that include 3-nitro-1,2,4-triazol-5-one (NTO) are replacing traditional explosive compounds. While these new formulations have superior safety characteristics, the compounds have greater environmental mobility, raising concern over potential contamination and cleanup of training and manufacturing facilities. Here, we examine the mechanisms and products of NTO photolysis in simulated sunlight to further inform NTO degradation in sunlit surface waters. We demonstrate that NTO produces singlet oxygen, and that dissolved oxygen increases the NTO photolysis rate in deionized water. The rate of NTO photolysis is independent of concentration and decreases slightly in the presence of Suwannee River Natural Organic Matter. …

Hyperspectral Reflectance For Determination Of Steel Rebar Corrosion And Cl− Concentration, Pengfei Ma, Liang Fan, Genda Chen

Civil, Architectural and Environmental Engineering Faculty Research & Creative Works

In This Study, a New Method is Proposed to Determine Chloride Ion (Cl−) Concentration and Steel Rebar Corrosion from Hyperspectral Spectroscopy. Three Groups of Mortar Cubes with Water-To-Cement (W/c) Ratios of 0.5, 0.6, and 0.7 Were Subjected to Rapid Corrosion Testing in 3.5 Wt% NaCl Solution to Accelerate the Transport of Chloride Ions. Embedded Along the Centerline of Each Mortar Cube Was a Steel Rebar that Corroded When the Cl− Accumulation Around It Exceeded a Critical/threshold Concentration. Open Circuit Potential Was Measured to Characterize the Corrosion Possibility of Steel Rebar. Mortar Surfaces Were Scanned with a Hyperspectral Camera in the …

Integrating Quality Assurance In Balance Mix Designs For Durable Asphalt Mixtures: State-Of-The-Art Literature Review, Yizhuang David Wang, Jun Liu, Jenny Liu

Civil, Architectural and Environmental Engineering Faculty Research & Creative Works

Delivering durable asphalt concrete within a reasonable cost is one of the great ambitions of pavement material engineers. This state-of-the-art review article documents the efforts spent in the past two decades to ensure the durability and performance of asphalt mixtures in mix design and production. A perspective with the attempt to integrate laboratory mix design, plant production quality assurance, and field place acceptance is applied in the review. The development of the performance specification and performance mix design is summarized. The paper categorizes performance specification into index-based performance specification and predictive performance specification that include performance-related specification and performance-based specification. …

Enhancement Of Heat-Cured Cement Paste With Tannic Acid, Jinrui Zhang, Ziye Kang, Youzhi Yang, Biqin Dong, Hongyan Ma

Civil, Architectural and Environmental Engineering Faculty Research & Creative Works

The Improvement of Cement-Based Materials' Performance by Natural Organic Compounds Can Greatly Promote the Green and Sustainable Development of the Construction Industry. However, Such Compounds Are Not Widely Used Yet Because of their Retarding Effect on Cement. in This Study, the Retardation Effect of Tannic Acid (TA, a Well-Known Retarding Compound) is overcome and the Enhancing Effect is Achieved by Adding Less Than 0.1% Content and Curing Samples in Thermal Regime. Then the Mechanism of TA Enhancing Heat-Cured Cement Pastes is Studied Systematically. Mechanical Properties Results Suggest that Addition of 0.025% TA Can Reduce the Compressive and Flexural Strengths of …

Synergistic Effect Of Hedp.4na And Different Induced Pouring Angles On Mechanical Properties Of Fiber-Reinforced Alkali-Activated Slag Composites, Jingjie Wei, Jianwei Liu, Kamal Khayat, Wu Jian Long

Civil, Architectural and Environmental Engineering Faculty Research & Creative Works

The Poor Flexural and Damping Properties of Building Materials Damages Concrete Structures and Affects their Service Life When Concrete Structures Are Subjected to Dynamic Loads. Three Different Dosages (I.e., 0%, 0.3%, and 0.6%) of Organic Phosphonates (HEDP.4Na) and Different Pouring Methods (I.e., Conventional Pouring Method, 90°-Induced Pouring Method, and 150°-Induced Pouring Method) Were Designed to Improve the Flexural and Damping Performance of Fiber-Reinforced Alkali-Activated Slag Composites (FR-AASC). the Enhanced Mechanism of HEDP.4Na Was Revealed by Phase Analysis (X-Ray Diffraction, XRD), Pore Structure Analysis (Mercury Intrusion Porosimetry, MIP), the Heat of Hydration, and Scanning Electron Microscopy (SEM) Analysis. the Results Showed …

Wind Effects On Dome Structures And Evaluation Of Cfd Simulations Through Wind Tunnel Testing, Tiantian Li, Hongya Qu, Yi Zhao, Ryan Honerkamp, Guirong Grace Yan, Arindam Chowdhury, Ioannis Zisis

Civil, Architectural and Environmental Engineering Faculty Research & Creative Works

In the Study, a Series of Wind Tunnel Tests Were Conducted to Investigate Wind Effects Acting on Dome Structures (1/60 Scale) Induced by Straight-Line Winds at a Reynolds Number in the Order of 106. Computational Fluid Dynamics (CFD) Simulations Were Performed as Well, Including a Large Eddy Simulation (LES) and Reynolds-Averaged Navier–Stokes (RANS) Simulation, and their Performances Were Validated by a Comparison with the Wind Tunnel Testing Data. It is Concluded that Wind Loads Generally Increase with Upstream Wind Velocities, and They Are Reduced over Suburban Terrain Due to Ground Friction. the Maximum Positive Pressure Normally Occurs Near the Base …

Precious Plastics - Plastic Brick Machine Fabrication, Timothy Ukaobasi Kanu, Evi Paraskevi Troulis

Architectural Engineering

The goal of this research is to determine the structural parameters of the recycled plastic polypropylene when molded into bricks resembling CMU blocks. To accomplish this, three mechanisms had to be assembled: the shredder, the injector, and the 1x1 mold. A tensile and compression test were to be performed on the plastic brick, and the values would be used to compare the tensile and compressive strength of PP plastic bricks, as well as their modulus of elasticity and stress vs. Strain performance. These values would be analyzed to determine whether it would be feasible to build an entire plastic wall. …

Construction Of High-Bay Lab Reaction Frame Foundations, David R. Bowen, Henry E. Miller, Blaize Twisselman

Construction Management

This paper details the construction process of two concrete modular foundations designed to meet specific design standards for various testing methods. The project, positioned within the California Polytechnic State University, San Luis Obispo (Cal Poly) High Bay Lab, will provide the Architectural Engineering (ARCE) and Construction Management (CM) departments with valuable insight into industry structural elements. The project required extensive forethought and thoroughness due to the complex designs, including 200 all-thread coupler attachments and a cumbersome rebar cage. This paper outlines the primary phases of construction, including material procurement and quality control, and discusses how the final product was obtained. …

Rheological Characterization Of Ultra-High Performance Concrete For 3d Printing, Arun R. Arunothayan, Behzad Nematollahi, Kamal Khayat, Akilesh Ramesh, Jay G. Sanjayan

Civil, Architectural and Environmental Engineering Faculty Research & Creative Works

The authors recently developed a 3D-printable ultra-high performance fiber-reinforced concrete (3DP-UHPFRC) for additive construction of structural members with significantly reduced reliance on steel bars. This study investigates the rheological behavior of the developed 3DP-UHPFRC. The effects of two major factors affecting the performance of 3DP-UHPFRC, namely steel fiber volume (0, 1%, and 2%) and nano-clay (NC) content (0, 0.1%, and 0.2% by binder mass) on workability, static yield stress, dynamic yield stress, and apparent viscosity were determined. Test results showed that the inclusion of steel fibers and NC reduced the workability and led to a significant increase in the static …

Effect Of Additional Water Or Superplasticizer On Key Characteristics Of Cement Paste Made With Superabsorbent Polymer And Other Shrinkage Mitigating Materials, Kamran Aghaee, Ricarda Sposito, Karl Christian Thienel, Kamal Khayat

Civil, Architectural and Environmental Engineering Faculty Research & Creative Works

The use of superabsorbent polymer (SAP) coupled with expansive agent (EA) or shrinkage-reducing admixture (SRA) can effectively reduce shrinkage of cement-based materials. However, SAP particles at high contents can adversely affect rheological and mechanical properties. Securing proper workability can be accomplished by additional water or adjusting the superplasticizer (SP) demand. There is an uncertainty about the efficiency of these approaches to workability compensation. This study evaluates the effect of additional water or SP on key properties of cement paste made with SAP and relatively high content of EA or SRA. Macro and micro mechanisms underlying the effect of combined shrinkage …

Homogeneous Flow Performance Of Steel-Fiber Reinforced Self-Consolidating Concrete For Repair Application: A Biphasic Approach, Naimeh Nouri, Masoud Hosseinpoor, Ammar Yahia, Kamal Khayat

Civil, Architectural and Environmental Engineering Faculty Research & Creative Works

In this study, fiber-reinforced self-consolidating concrete (FR-SCC) was considered as a diphasic suspension of fiber and coarse aggregate (F-A ≥ 5 mm) skeleton in mortar suspension with solid particles finer than 5 mm. The coupled effect of the volumetric content of fibers, coarse aggregate particle-size distribution, and rheological properties of the mortar on the passing ability and dynamic stability of various FR-SCC mixtures was investigated. Nine high-strength and 10 conventional-strength FR-SCC mixtures for repair application were proportioned with water-to-binder ratios (W/B) of 0.35 and 0.42, respectively, and macro steel fibers of 0.1%–0.5% volumetric contents. The dosages of high-range water-reducer (HRWR) …

Effect Of Class C And Class F Fly Ash On Early-Age And Mature-Age Properties Of Calcium Sulfoaluminate Cement Paste, Sukanta K. Mondal, Carrie Clinton, Hongyan Ma, Aditya Kumar, Monday Uchenna Okoronkwo

Civil, Architectural and Environmental Engineering Faculty Research & Creative Works

To Promote the Sustainable Development of Eco-Efficient Calcium Sulfoaluminate (CSA) Cements through the Partial Replacement of the CSA Clinker with Supplementary Cementitious Waste Products, the Effects of Coal Fly Ashes on the Early-Age and Mature-Age Properties of a Calcium Sulfoaluminate (CSA)-Based Cement Paste Were Investigated. the Impacts of Both Class C and Class F Fly Ashes on the Rheological Properties, Hydration Kinetics, and Compressive Strength Development of CSA Cement Paste Were Studied. Rheology-Based Workability Parameters, Representing the Rate of Loss of Flowability, the Rate of Hardening, and the Placement Limit, Were Characterized for the Pastes Prepared with Fixed Water-To-Cement (W/c) …

A Framework To Predict Variability Characteristics In Building Load Profiles, Sam Moayedi, Andrew Parker, Kevin James, Xiaoyue Cheng, Michael Hempel, Hamid Sharif, Mahmoud A. Alahmad

Durham School of Architectural Engineering and Construction: Faculty Publications

The expansion of Advanced Metering Infrastructure (AMI) has provided building operators and researchers detailed information on building energy consumption. The majority of AMI systems, however, record data at relatively low resolutions of 15, 30, or 60 minutes, due to cost, storage and bandwidth limitations. Emerging applications in power flow analysis, Quasi-Static Time-Series Simulation (QSTS), smart grid integration and load matching, however, require data at higher resolutions. Short-term energy demand can deviate significantly from long-term averages, with an unknown magnitude and frequency when only low-resolution load profile data is available. This paper presents a novel data-driven approach to predict characteristics of …

Integration Of Real-Time Semantic Building Map Updating With Adaptive Monte Carlo Localization (Amcl) For Robust Indoor Mobile Robot Localization, Matthew Peavy, Pileun Kim, Hafiz Oyediran, Kyungki Kim

Durham School of Architectural Engineering and Construction: Faculty Publications

A robot can accurately localize itself and navigate in an indoor environment based on information about the operating environment, often called a world or a map. While typical maps describe structural layouts of buildings, the accuracy of localization is significantly affected by nonstructural building elements and common items, such as doors, appliances, and furniture. This study enhances the robustness and accuracy of indoor robot localization by dynamically updating the semantic building map with non-structural elements detected by sensors. We propose modified Adaptive Monte Carlo Localization (AMCL), integrating object recognition and map updating into the traditional probabilistic localization. With the proposed …

Marshall, Il Brownfield/Superfund Site Project, Nathan Myers

2022 Fall Reports (Marshall, IL)

This course will examine modern public policymaking in the United States. We will examine the different forms that policy can take and how each branch of government can leave a lasting impact on policy. The course will investigate the environment in which policy in the U.S. is shaped and the key official and unofficial actors involved. The course will investigate how public policy issues are defined and earn a place on the policy agenda. The remainder of the course will focus on various criteria for evaluating policy: effectiveness, efficiency, equity, liberty, security, and resilience. The manner in which policy often …

Marshall Residential Development, Kimberly Smith

2022 Fall Reports (Marshall, IL)

Introduction and development of the design process through the exploration of abstract and realistic problem-solving applications. Design solutions are presented through the development of two- and three-dimensional presentation techniques.

Marshall, Il Housing Affordability Project, Nathan Myers

2022 Fall Reports (Marshall, IL)

This class is designed to provide a basic working understanding of statistical methods which are commonly used in the social sciences, including public administration. Students will learn the mathematical logic behind the procedures by calculating statistical formulas. Students will also gain proficiency in completing statistical procedures using Microsoft Excel (the Statistical Package for the Social Sciences, or SPSS, may also be used).

Internal Structure And Breakage Behavior Of Biogenic Carbonate Sand Grains, Elieh Mohtashami, C. Guney Olgun, Chenglin Wu, Tara Selly

Civil, Architectural and Environmental Engineering Faculty Research & Creative Works

This Study Investigates the Mechanical Behavior of Biogenic Carbonate Sands from Puerto Rico at Grain-Scale Level. Micro-Computed Tomography Has Also Been Used to Get Insights on the Internal Structure of These Particles Before and after Loading. the Crushing Strength of These Particles Are Smaller Comparing to the Values Reported for Silica Sands. It Has Also Been Shown that These Particles Have Complex Internal Structure Including a Network of Pores Connected with Channels. This Study Also Demonstrates the Effect of Intragrain Structure of Biogenic Carbonate Sands and Shows How Internal Grain Structure Plays a Role on Particle Fracture.

Key Factors Affecting Labor Productivity In Offsite Construction Projects, Rayan H. Assaad, Islam H. El-Adaway, Makarand Hastak, Kim Lascola Needy

Civil, Architectural and Environmental Engineering Faculty Research & Creative Works

Offsite construction has been shown to possess many advantages and benefits in dealing with the construction industry's challenges, which include poor labor productivity. Nevertheless, all previous productivity-related research studies have focused mainly on factors impacting labor productivity in traditional stick-built construction methods. This paper filled this knowledge gap by following a multistep interrelated research methodology. First, a research team of 19 construction professionals and academics developed and distributed an industry survey to (1) quantify the likelihood of occurrence and relative impact of risk factors that adversely impact labor productivity in offsite construction projects; (2) identify and prioritize key risk factors …

Efficient And Accurate Coded Target Decoding For 3d Reconstruction Of Soil Specimens In Triaxial Test, Xiaolong Xia, Xiong Zhang

Civil, Architectural and Environmental Engineering Faculty Research & Creative Works

Coded Targets Have Been Widely Used for Solving the Corresponding Problem in Photogrammetry for High-Accuracy Three-Dimensional Measurements. Accurate and Efficient Recognition and Identification of Coded Targets Are of Great Importance in Coded Target-Based Photogrammetry. in This Paper, an Efficient and Accurate Method for Coded Target Decoding Was Developed. in This Method, Blob Analysis Was Performed to Recognize the Coded Targets. Then, Image Processing, the RANSAC Algorithm, and the Interpolation Technique Were Applied Respectively to Decode the Coded Targets, Identify Falsely Identified Coded Targets, and Recover Missing Coded Targets. Interpolation Was Also Performed on the Membrane, Which Can Significantly Increase the …

Prediction Of Dynamic Mechanical Behaviors Of Coral Concrete Under Different Corrosive Environments And Its Enhancement Mechanism, Jingjie Wei, Boyuan Cheng, Lixiao Li, Wu Jian Long, Kamal Khayat

Civil, Architectural and Environmental Engineering Faculty Research & Creative Works

The marine structures are usually exposed to dynamic loadings within short periods and chemical attacks, resulting in severe dynamical damage or failure to concrete structures. The study of the time-dependent changes in the dynamic mechanical behavior of coral concrete under different corrosive environments and low-frequency waves is limited. For the safety and reliable use of coral concrete in the marine environment, different corrosion environments (chloride ions, sulfate ions, and mixed chloride-sulfate ions) and low-frequency waves (0.5–2.0 Hz) were designed to evaluate the dynamic properties of concrete. A model considering the effect of corroded age is formulated to predict the damping …

Editorial: Ultra-High Performance Concrete: Computation And Simulation Methods, Xinpeng Wang, Yitong Ma, Dongshuai Hou, Hongyan Ma, Yue Zhang

Civil, Architectural and Environmental Engineering Faculty Research & Creative Works

No abstract provided.

Identifying Design-Build Decision-Making Factors And Providing Future Research Guidelines: Social Network And Association Rule Analysis, Ramy Khalef, Islam H. El-Adaway

Civil, Architectural and Environmental Engineering Faculty Research & Creative Works

There is a dire need to rebuild existing infrastructure with strategic and efficient methods. Design-build (DB) becomes a potential solution that provides fast-tracked delivery as a more time and cost-efficient project delivery method. Past research studied factors influencing DB but without providing a holistic analytic approach. This paper fills this knowledge gap. First, a systematic literature review is performed using the preferred reporting items for systematic reviews and meta-analyses techniques, and a set of factors affecting DB projects are then identified and clustered, using k-means clustering, based on the whole literature discussions. Second, a graph theory approach, social network analysis …