Open Access. Powered by Scholars. Published by Universities.®

Digital Commons Network™

Open Access. Powered by Scholars. Published by Universities.®

2026

Discipline
Institution
Keyword
Publication
Publication Type
File Type

Articles 6661 - 6690 of 107913

Full-Text Articles in Entire DC Network

Utilization Of Mineral Sequestration For Co2 Capturing In Car Parks And Tunnels, Aymen Alsaad, Tareq Al-Attar, Basil Al-Shathr Aug 2026

Utilization Of Mineral Sequestration For Co2 Capturing In Car Parks And Tunnels, Aymen Alsaad, Tareq Al-Attar, Basil Al-Shathr

Engineering and Technology Journal

Decreasing the emissions of CO2 that come from vehicle exhaust, especially in car parking and tunnels, is so vital. CO2 emissions cause corrosion to a reinforcement of concrete. Thus, there is a need to provide a layer that protects the reinforcement from the reach of this harmful gas. This work goals to investigate the efficiency of using board units from Pozzolime concrete and pervious concrete to sequestrate CO2 from the environment and then to convert it into calcium carbonate inside the concrete. The units have dimensions of (200×400×40±5). All specimens were cured in a water tank after about 48 hours …

Go to article

Pose Estimation Of Objects Using Digital Image Processing For Pick-And-Place Applications Of Robotic Arms, Firas Hameed, Hasan Alwan, Qasim Ateia Aug 2026

Pose Estimation Of Objects Using Digital Image Processing For Pick-And-Place Applications Of Robotic Arms, Firas Hameed, Hasan Alwan, Qasim Ateia

Engineering and Technology Journal

Robot Vision is one of the most important applications in Image processing. Visual interaction with the environment is a much better way for the robot to gather information and react more intelligently to the variations of the parameters in that environment. A common example of an application that depends on robot vision is that of Pick-And-Place objects by a robotic arm. This work presents a method for identifying an object in a scene and determines its orientation. The method presented enables the robot to choose the best-suited pair of points on the object at which the two-finger gripper can successfully …

Go to article

Influence Of Fly Ash Addition On Behavior Of Soft Clayey Soil, Hussein Karim, Zeena Samueel, Adel Jassem Aug 2026

Influence Of Fly Ash Addition On Behavior Of Soft Clayey Soil, Hussein Karim, Zeena Samueel, Adel Jassem

Engineering and Technology Journal

This paper investigates the impact of the fly Ash addition on the Geotechnical properties of soft soil as well as chooses the optimum percentage added of fly ash. To understand the behavior of fly ash mixed with soil, a number of laboratory experiments testing conducted on clayey soil-fly ash mixture in several percentages (5,10,15,20,25, and 30%) as Atterberg test, Specific gravity test, compaction test, California Bearing Ratio (C.B.R) Test, Unconfined Compressive Strength (UCS) Test, Consolidation Test. Test results indicate rising in plastic limit and liquid limit as fly ash adding. Specific gravity decreased essentially by adding fly ash. Whereas there …

Go to article

Study Of Power System Load Flow Using Fpga And Labview, Ahmed Yaseen, Afaneen Abbood Aug 2026

Study Of Power System Load Flow Using Fpga And Labview, Ahmed Yaseen, Afaneen Abbood

Engineering and Technology Journal

The capability to rapidly execute the power flow (PF) calculations permit engineers in assured with stay bigger assured within the dependability, protection, and economical operation of their system within the case of planned or unplanned instrumentality failures. The purpose of this work is to investigate the use of FPGA characteristics to speed up power flow computing time for the on-line monitoring system of a power system. The work comprises which is the development of the Power flow program using the Fast-decoupled method based on FPGA (Field Programmable Gate Array), and LABVIEW (graphical programming environment). The program delivered very satisfactory results …

Go to article

Vision Improvement Using Titanium Dioxide Nanoparticles-Doped Pmma For Contact Lenses, Lina Shaker, Ali Al-Hamdani, Ahmed Al-Amiery Aug 2026

Vision Improvement Using Titanium Dioxide Nanoparticles-Doped Pmma For Contact Lenses, Lina Shaker, Ali Al-Hamdani, Ahmed Al-Amiery

Engineering and Technology Journal

Polymer-based nanocomposites exhibit various optical virtues such as a high refractive index (RI), the dispersion index (Abbe number (νd)) and visible light transmittance (T %) about 95-99%. Titanium dioxide nanoparticles (TiO2 NPs) is suggested as a good candidate to rise the RI and maintain high transparency when it is integrated with Poly(methyl methacrylate) polymer PMMA because TiO2 NPs have a high RI (2.45 and 2.7 for anatase and rutile phase, respectively). The ocular performance was evaluated by modulation transfer function (MTF) and image simulation. The used criteria show that the best visual performance is obtained when TiO2-PMMA-CL of 0.1 wt/volume …

Go to article

Flexural Performance Of Reinforced Concrete Built-Up Beams With Sifcon, Ghazwan Mohammed, Kaiss Sarsam, Ikbal Gorgis Aug 2026

Flexural Performance Of Reinforced Concrete Built-Up Beams With Sifcon, Ghazwan Mohammed, Kaiss Sarsam, Ikbal Gorgis

Engineering and Technology Journal

The study deals with the effect of using Slurry infiltrated fiber concrete (SIFCON) with the reinforced concrete beams to explore its enhancement to the flexural capacity. The experimental work consists of the casting of six beams, two beams were fully cast by conventional concrete (CC) and SIFCON, as references. While the remaining was made by contributing a layer of SIFCON diverse in-depth and position, towards complete the overall depths of the built-up beam with conventional concrete CC. Also, an investigation was done through the control specimens testing about the mechanical properties of SIFCON. The results showed a stiffer behavior with …

Go to article

A Novel Application For Parabolic Trough Solar Collector Based On Helical Receiver Tube And Nano-Fluid With A Solar Tracking Mechanism, Saad Hamidi Aug 2026

A Novel Application For Parabolic Trough Solar Collector Based On Helical Receiver Tube And Nano-Fluid With A Solar Tracking Mechanism, Saad Hamidi

Engineering and Technology Journal

Novel techniques to enhance thermal performance using a helical coil receiver tube and Nano-fluid materials are presented in this paper. Two different applied techniques to enhance thermal performance are used as a new application on parabolic trough solar collector (PTSC). In the present work, PTSC has been fabricated using Dioxide Silicon SiO2 with an average particle size of 40nm by taking volume fraction of SiO2 0.1, 0.2 and 0.3%. Distilled water based Nano-fluid as a working fluid and a helical coil receiver tube were used in this paper. Varying the flow rate of Nano-fluids 100,150 and 200l/h are used, respectively. …

Go to article

Effect Of Orientation And Pre-Tension On Stresses Distribution On V-Die Bending Processes By Finite Element Method, Adil Jabber, Aseel Abed, Anwar Zabon Aug 2026

Effect Of Orientation And Pre-Tension On Stresses Distribution On V-Die Bending Processes By Finite Element Method, Adil Jabber, Aseel Abed, Anwar Zabon

Engineering and Technology Journal

Simulation of metal forming processes using the Finite Element Method (FEM) is a well-established procedure, being nowadays possible to develop alternative approaches, such as inverse methodologies, in solving complex problems. This study investigated the effect of orientation and pre-tension on stresses distribution numerically by software ANSYS 19 using the finite element method. The pre-tension is 55% from total strained in each rolling direction. The results show that the orientation has a significant effect on stresses distribution and stress value before and after pre-tension 55%. Although there is a regular distribution of stresses in three direction, but there is significant difference …

Go to article

Fabrication Of Ni-Zro2 Nanocomposite Coating By Electroless Deposition Technique, Hiba Algailani, Adel Mahmoud, Hanna Al-Kaisy Aug 2026

Fabrication Of Ni-Zro2 Nanocomposite Coating By Electroless Deposition Technique, Hiba Algailani, Adel Mahmoud, Hanna Al-Kaisy

Engineering and Technology Journal

This work aims preparation of Ni-based nanocomposite coating by electroless deposition method onto stainless steel (316L) substrate, the present work will compare the effects of incorporation of ZrO2 nanoparticles at different percentages (1.25 wt %, 2.25 wt %, and 4.25 wt %) Ni-based electroless deposition coating of the bath nanocomposite on the phase structure, microhardness, and corrosion resistance is studied. Where the structure and chemical composition of nanocomposite coatings were studied by using (X-ray), (SEM) and (EDS). of Ni - ZrO2 nanocomposite coating exhibits much-increased microhardness and remarkably improved corrosion resistance

Go to article

Analysis And Comparison Of Dc-Dc Boost Converter And Interleaved Dc-Dc Boost Converter, Karrar Faraj, Jasim Hussain Aug 2026

Analysis And Comparison Of Dc-Dc Boost Converter And Interleaved Dc-Dc Boost Converter, Karrar Faraj, Jasim Hussain

Engineering and Technology Journal

The step-up converters are widespread use in many applications, including powered vehicles, photovoltaic systems, continuous power supplies, and fuel cell systems. The reliability, quality, maintainability, and reduction in size are the important requirements in the energy conversion process. Interleaving method is one of advisable solution for heavy-performance applications, its harmonious in circuit design by paralleling two or more identical converters. This paper investigates the comparison performance of a two-phase interleaved boost converter with the traditional boost converter. The investigation of validation performance was introduced through steady-state analysis and operation. The operation modes and mathematical analysis are presented. The interleaved boost …

Go to article

Study Of The Barreling Of Copper Solid And Hollow Cylinders Under Uniaxial Compressive Load, Abdullah Assi Aug 2026

Study Of The Barreling Of Copper Solid And Hollow Cylinders Under Uniaxial Compressive Load, Abdullah Assi

Engineering and Technology Journal

In this study, the effect of axisymmetric compression of cylindrical blocksof copper on diameter ratio, height reduction ratio and aspect ratio wasnoted. The effects of these non-dimensional parameters are verysignificant to the geometry of barreling throughout the process of plasticdeformation of a cylinder under axial compression. The barreling effectwas studied for solid and hollow copper cylindrical blocks having differentdimensions. The relationship between the parameters was also studied.The practical results obtained were compared with some of the existingtheories, and there was a good correlation of the results with thesetheories.

Go to article

A Comparison Study On The Effect Of Various Layered Sandy Soil Deposited On Final Settlement Under Dynamic Loading, Hussein Karim, Zina Samuel, Mohammed Hussein Aug 2026

A Comparison Study On The Effect Of Various Layered Sandy Soil Deposited On Final Settlement Under Dynamic Loading, Hussein Karim, Zina Samuel, Mohammed Hussein

Engineering and Technology Journal

The foundation is expansion in base of column, wall or other structure in order to transmit the loads from the structure to under footing with a suitable pressure with soil property. There are two conditions to design foundation: 1. The stress is applied by footing on soil is not exceeded allowable bearing capacity ( ). 2. The foundation settlement and differential settlement are due to applied loads are not exceeding the allowable settlement that based on the type and size of structure, the nature of soil. Rigid square machine footing with dimension 200*200 mm with two types of relative density …

Go to article

Strut Confinement Of Simply Supports Deep Beam Using Strut Reinforcement, Eyad Sayhood, Khudayer Abdullah, Sarah Kazem Aug 2026

Strut Confinement Of Simply Supports Deep Beam Using Strut Reinforcement, Eyad Sayhood, Khudayer Abdullah, Sarah Kazem

Engineering and Technology Journal

This study investigates the effect of confining the Strut region of the deep beam by using Struts Reinforcement; which consists of four main bars enclosed by stirrups. Six specimens were tested for investigating the behavior of deep beams including; ultimate load, mid-span deflection, crack pattern, first shear and first flexure cracks, concrete surface strain and mode of failure. The specimens were tested under two symmetrical points load with and of 1 and compressive strength of 38 MPa. The main parameters were: first one the diameter of the main bars of Strut Reinforcement (8, 10, 12 mm) with constant spacing of …

Go to article

Preparation Of Al2o3/Mgo Nano-Composite Particles For Bio-Applications, Hayder Sallal, Alla Abdul-Hameed, Farhad. Othman Aug 2026

Preparation Of Al2o3/Mgo Nano-Composite Particles For Bio-Applications, Hayder Sallal, Alla Abdul-Hameed, Farhad. Othman

Engineering and Technology Journal

This study describes the preparation and study of the properties of Nano composite particles prepared in a sol-gel method which consists of two materials (Αl2Ο3-MgΟ). The powder was evaluated by x-ray diffraction analysis, scanning electron microscopy analysis (SEM), particle size analysis, and energy dispersive x-ray analysis (EDX) and antibacterial test. The evaluation results of the nanocomposite particles shows a good distribution of the chemical composition between aluminum oxide and magnesium oxide, smoothness in particles size where it reached to (54.9, 59.8) nm at calcination in (550 0C and 850 0C) respectively, formation of different shapes of nanoparticles and different phases …

Go to article

Effect Of Octane Number On Performance And Exhaust Emissions Of An Si Engine, Noor Athafah, Adei Salih Aug 2026

Effect Of Octane Number On Performance And Exhaust Emissions Of An Si Engine, Noor Athafah, Adei Salih

Engineering and Technology Journal

Spark ignition engines are very popular engines that they are running millions of vehicles all over the world. This engine emits many harmful pollutants, such as CO, UHC, and NOX. In this paper, the impact of gasoline octane number on the engine performance and exhaust emissions was studied. In the tests, four-cylinder, four-stroke engine, and two variable octane numbers (RON83 and 94.5) were used. The engine was run at different engine speeds and loads. The results from the experimental study indicated that the brake specific fuel consumption (bsfc) of RON94.5 was higher than RON83 by 13.93%, while the brake thermal …

Go to article

Effect Of Pre-Tension On The Springback Behavior Of The Yellow Brass, Anwar Zabon, Aseel Abed Aug 2026

Effect Of Pre-Tension On The Springback Behavior Of The Yellow Brass, Anwar Zabon, Aseel Abed

Engineering and Technology Journal

Springback forecasting of sheet formation is constantly remarkable problem in the métier, due to their influence the great in the definitive shape of the product. Study presents effects of pretension in tow rolling direction (0, 45 degree) on the springback behavior of the (Brass 65-35) sheet under V-die bending by an experimental. The pretension ranges from five different pretensions levels starting from 11% to 55% from total strain in each rolling direction by increment of 11%. used in punching that was performed at a constant deformation velocity of (5 mm/min) then bent on a 90° V-shaped die for the springback …

Go to article

Experimental Investigation Of Combined Effect Of Particle Size And Stability Of Al2o3-H2o Nanofluid On Heat Transfer Augmentation Through Horizontal Pipe, Abdulhassan Karamallah, Hayder Abed Aug 2026

Experimental Investigation Of Combined Effect Of Particle Size And Stability Of Al2o3-H2o Nanofluid On Heat Transfer Augmentation Through Horizontal Pipe, Abdulhassan Karamallah, Hayder Abed

Engineering and Technology Journal

The stability of nanofluid plays a rule in heat transfer growth for different engineering systems. The stability and particle size of Al2O3-H2O nanofluid effects on heat transfer are studied experimentally. Two particle sizes (20 and 50 nm) with (0.1, 0.5 and 1%) concentrations were prepared and tested under constant heat flux (1404 W) with fully developed turbulent flow through a horizontal pipe. The results show an increase in Nusselt number by 20.7% and 17.6% with 1 vol.% concentration for 20 and 50 nm, respectively compared to distilled water. Examined nanofluid showed improvement in Nu number by (30.3 and 23.5) % …

Go to article

Improve The Surface Characteristics Of The Electric Discharge Machining Employing A Method Burnishing Process, Shukry Aghdeab, Ahmed Abdulameer, Ahmed Abdulwahhab, Majid Ismiel Ismiel Aug 2026

Improve The Surface Characteristics Of The Electric Discharge Machining Employing A Method Burnishing Process, Shukry Aghdeab, Ahmed Abdulameer, Ahmed Abdulwahhab, Majid Ismiel Ismiel

Engineering and Technology Journal

Electrical Discharge Machining (EDM) applies the concept of material eradication by utilizing electric spark erosion. The target of this exploration concentrates to examine the ideal procedure parameters of EDM on Aluminum 6061-T6as a workpiece with copper as a tool electrode. The effect of various process operators 'on machining rendering was examined. Internal factors with current (10, 20, 30) Ampere, pulse on time (50, 100, 150) μs was used after which takes pulse off time (25, 50, 75) μs. All parameters applied for empirical acts with influence on Ra (surface roughness ). The result showed that MRR" Material Removal Rate” is …

Go to article

Optimizing Of Coating Layers Parameters Of (Nano Hydroxyapatite/Tio2 Nps) On Nitinol Smas By Electrophoretic Deposition, Riyam Rawdan, Makarim Abdulkareem, Ali Mustafa Aug 2026

Optimizing Of Coating Layers Parameters Of (Nano Hydroxyapatite/Tio2 Nps) On Nitinol Smas By Electrophoretic Deposition, Riyam Rawdan, Makarim Abdulkareem, Ali Mustafa

Engineering and Technology Journal

This study aims to obtain the optimal variable for depositing (HA, TiO2 and Composite) Nanomaterial on NiTi SMAs. Taguchi approach (with L9 array) was used to obtain the optimal conditions for coating produced by Electrophoretic deposition (EPD) techniques. The deposition process was done in different conditions (voltage, time, concentration and degree of grinding). Voltages were used (20, 40 and 60) volts, the time is (2, 4 and 6) min, the degree of the surface roughness (180, 500 and 1200) μm while the concentration of HA and TiO2 are (2, 4, and 6) g/L for each one. Chitosan (biopolymer) was used …

Go to article

Experimental Investigation Of The Influence Of Adding Alumina To Diesel Fuel On The Engine Performance And Emission Characteristics, Sadiq Bunyan, Abed Al-Khadim Hassan Aug 2026

Experimental Investigation Of The Influence Of Adding Alumina To Diesel Fuel On The Engine Performance And Emission Characteristics, Sadiq Bunyan, Abed Al-Khadim Hassan

Engineering and Technology Journal

The present experimental work is conducted to examine the influence of adding Alumina (Al2O3) nanoparticles to diesel fuel on the characteristic of the emissions and engine performance. The size of nanoparticles which have been added to diesel fuel to obtain nano-fuel is 20 nm. Three doses of Aluminum oxide were prepared (25, 50 and 100) ppm. The nanoparticles mixed with fuel by mechanical homogenous (manual electrical mixer) and ultrasonic processor. The study reveals that the adding of Aluminum oxide (Al2O3) to gas oil (Al2O3+DF) enhances the physical properties of fuel. Also, the adding of (Al2O3) reduce CO emissions by 20.5%, …

Go to article

Hydrogeological And Hydro Chemical Evaluation Of Groundwater In Karbala Region Using Geographic Information System (Gis), Marwa Hussein, Imzahim Alwan, Tariq Hussain Aug 2026

Hydrogeological And Hydro Chemical Evaluation Of Groundwater In Karbala Region Using Geographic Information System (Gis), Marwa Hussein, Imzahim Alwan, Tariq Hussain

Engineering and Technology Journal

The study area is located in the holy governorate of Karbala, Iraq; the research studied a predictive mathematical model of groundwater within Dibdiba Formation and by fifty (50) wells distributed randomly within the boundaries of the study area, all of them fall within the unconfined aquifer. Likewise, there is no component to direct the activity of these wells, where a mathematical model for the study area has been developed using the groundwater system modeling program (GMS v.10). The area was divided into a grid where the dimensions of a single cell ranged from 250m×250m. The model of the steady flow …

Go to article

Random Forest (Rf) And Artificial Neural Network (Ann) Algorithms For Lulc Mapping, Tay Shihab, Amjed Al-Hameedawi, Ammar Hamza Aug 2026

Random Forest (Rf) And Artificial Neural Network (Ann) Algorithms For Lulc Mapping, Tay Shihab, Amjed Al-Hameedawi, Ammar Hamza

Engineering and Technology Journal

In this paper to make use of complementary potential in the mapping of LULC spatial data is acquired from LandSat 8 OLI sensor images are taken in 2019. They have been rectified, enhanced and then classified according to Random forest (RF) and artificial neural network (ANN) methods. Optical remote sensing images have been used to get information on the status of LULC classification, and extraction details. The classification of both satellite image types is used to extract features and to analyse LULC of the study area. The results of the classification showed that the artificial neural network method outperforms the …

Go to article

Preparation And Characterization Of Polymer Blend And Nano Composite Materials Based On Pmma Used For Bone Tissue Regeneration, Sally Kadhum Alsaedi, Sihama Salih, Fadhil Hashim Aug 2026

Preparation And Characterization Of Polymer Blend And Nano Composite Materials Based On Pmma Used For Bone Tissue Regeneration, Sally Kadhum Alsaedi, Sihama Salih, Fadhil Hashim

Engineering and Technology Journal

As the elderly population increases, the need for bone loss treatments is increasing. Vital substances used in such treatments are required to continue for a longer period and work more effectively. The particularly important biological material is poly methyl methacrylate (PMMA) bone cement, which is widely used in damaged bone replacement surgery. So, this study focused on the role of added some nanoparticles consist of zirconia (ZrO2), and magnesia (MgO) on the binary polymeric blend (Acrylic bone cement: 15% PMMA) for a bone scaffold. Where, ZrO2 and MgO nanoparticle was added with selected weight percentages (0, 0.5, 1, 1.5 and …

Go to article

Characterizations Of Synthetic 8mol% Ysz With Comparison To 3mol %Ysz For Ht-Sofc, Abeer Al-Attar, Saad Farid, Fadhil Hashim Aug 2026

Characterizations Of Synthetic 8mol% Ysz With Comparison To 3mol %Ysz For Ht-Sofc, Abeer Al-Attar, Saad Farid, Fadhil Hashim

Engineering and Technology Journal

In this work, Yttria (Y2O3) was successfully doped into tetragonal 3mol% yttria stabilized Zirconia (3YSZ) by high energy-mechanical milling to synthesize 8mol% yttria stabilized Zirconia (8YSZ) used as an electrolyte for high temperature solid oxide fuel cells (HT-SOFC). This work aims to evaluate the densification and ionic conductivity of the sintered electrolytes at 1650°C. The bulk density was measured according to ASTM C373-17. The powder morphology and the microstructure of the sintered electrolytes were analyzed via Field Emission Scanning Electron Microscopy (FESEM). The chemical analysis was obtained with Energy-dispersive X-ray spectroscopy (EDS). Also, X-ray diffraction (XRD) was used to obtain …

Go to article

Comparative Study Of Perturb & Observe, Modified Perturb & Observe And Modified Incremental Conductance Mppt Techniques For Pv Systems, Mohanad Mahmood, Inaam Ali, Oday Ahmed Aug 2026

Comparative Study Of Perturb & Observe, Modified Perturb & Observe And Modified Incremental Conductance Mppt Techniques For Pv Systems, Mohanad Mahmood, Inaam Ali, Oday Ahmed

Engineering and Technology Journal

This paper presents a modified maximum power point tracking algorithm (Modified MPPT) for PV systems based on incremental conductance (IC) algorithm. This method verified with the dynamic irradiance and sudden change of irradiance, the comparisons with conventional methods, for example, the perturbation and observation (P&O) and Modified perturbation and observation (Modified P&O) were performed. A photovoltaic (PV) panel was simulated and tested using MATLAB/Simulink based on PV panel at Power Electronics Laboratory. The results show that this method capable to find the maximum power point (MPP) under dynamic behavior faster than ( P&O) and Modified P&O). Reduced oscillation of MPP …

Go to article

Synthesis And Characterization Of Complexes Of New Derivative Of Cyclopentaphenanthren-3-One With Manganese (Ii), Iron (Ii), Cobalt (Ii), Nickel (Ii), And Copper (Ii) Ions, Liblab Jassim Aug 2026

Synthesis And Characterization Of Complexes Of New Derivative Of Cyclopentaphenanthren-3-One With Manganese (Ii), Iron (Ii), Cobalt (Ii), Nickel (Ii), And Copper (Ii) Ions, Liblab Jassim

Engineering and Technology Journal

This work involves the chemical preparation from a series of metal Complexes having the general composition M(L)2(H2O)2, where M = [Mn+2, Fe+2, Co+2, Ni+2 and Cu+2].The ligand used was 9-fluoro-17-(1-hydrazono-2-hydroxyethyl)-11,17-dihydroxy-10,13,16-trimethyl-6,7,8,9,10,11,12,13,14,15,16,17-dodecahydro-3H-cyclopenta[α]phenanthren-3-one (FHDTCP), who was diagnosed by H-NMR spectra.These complexes have been prepared and characterized by the ligand to metal by molar conductance, spectral (UV-Visible and FT-IR), and atomic absorption studies. The IR spectral measurements forecast interference to oxygen, nitrogen in coordination from the electron pairs to the metal ion in the center. And suggested the complexes geometry be octahedral for all.

Go to article

Semi-Quantitative Risk Assessment In The Chemical Stores Of The University Of Technology, Baghdad, Iraq, Azhar Haleem Aug 2026

Semi-Quantitative Risk Assessment In The Chemical Stores Of The University Of Technology, Baghdad, Iraq, Azhar Haleem

Engineering and Technology Journal

Chemicals are used daily at the university, by its students or staff so it’s necessary to develop a chemical management system to protect their workers and students from accidents caused by exposure to chemicals of various forms, the present study explains the methodology for assessing the health effects and risks of exposure to chemicals in the chemical stores of University of Technology (UOT) by using semi- quantitative risk assessment technique depends on a descriptive analytical approach, by collecting the requested information for seven main stores within the university by questionnaire form included inquiries about personal information about employees, level of …

Go to article

Diagnosis Of Lung Cancer Disease Based On Back-Propagation Artificial Neural Network Algorithm, Hanan Akkar, Suhad Qasim Haddad Aug 2026

Diagnosis Of Lung Cancer Disease Based On Back-Propagation Artificial Neural Network Algorithm, Hanan Akkar, Suhad Qasim Haddad

Engineering and Technology Journal

Early stage detection of lung cancer is important for successful controlling of the diseases, also to offer additional chance to the patients in order to survive. So , algorithms that are related with computer vision and Image processing are extremely important for early medical diagnosis of lung cancer. In current work ( ) computed tomography scan images were collected from several patients Classification was done using Back Propagation Artificial Neural Network ( ).It is considered as a powerful artificially intelligent technique with training rule for optimization to update the weights of the overall connections in order to determine the abnormal …

Go to article

Structural Properties Of Fe Doped Tio2 Nanorods Prepared By Low Cost Hydrothermal Method, Sattar Hashim, Khaleel Hassoon, Odai Salman Aug 2026

Structural Properties Of Fe Doped Tio2 Nanorods Prepared By Low Cost Hydrothermal Method, Sattar Hashim, Khaleel Hassoon, Odai Salman

Engineering and Technology Journal

In this work, titanium dioxide films were deposited on fluorine tin oxide (FTO)-glass substrates using Hydrothermal method. A low-cost homemade autoclave was used to fabricate pure TiO2 and Fe-doped (0.1%, 0.3%, 0.5%, 0.7% and 1.5%) films. X-ray diffraction patterns showed that the predominant phase is rutile (R-TiO2) with peaks at (101), (002) and (112). The Field Emission Scanning Electron Microscope (FESEM) top and cross-sectional images indicated that the films have vertically aligned nanorods structures with parallelogram cross-sectional areas and aspect ratio range (9.2-15.3).

Go to article

Analysis And Design Of 460 Ghz Microwave Gyrotron Oscillator, Luma Abbas, Nedal Hussain Aug 2026

Analysis And Design Of 460 Ghz Microwave Gyrotron Oscillator, Luma Abbas, Nedal Hussain

Engineering and Technology Journal

This paper is concerned with the analysis and design of a gyrotron oscillator with 460 GHz that can excite both modes (TE231) the fundamental (230GHz) and (TE061, TE261) second harmonic (near 460GHz). The oscillator is operated with 12KV beam voltage and 100mA beam current, and a computer program was developed to study the cavity in this oscillator and the wave-particle interaction inside it using the forward finite difference technique as a numerical method. The input data of the program are electron energy, velocity ratio, normalized cavity length, the normalized value of the external magnetic field, the mode number (m,n,l), and …

Go to article

First Prev Next Last