Thermal Energy Storage System Using Silica Sand As Heat Storage Medium: Simulation Of Geita Gold Mine,
2025
Department of Electrical Engineering, University of Dar es Salaam, P.O. Box 35131, Dar es Salaam, Tanzania
Thermal Energy Storage System Using Silica Sand As Heat Storage Medium: Simulation Of Geita Gold Mine, Santos Kihwele
Tanzania Journal of Engineering and Technology (TJET)
Currently, Geita Gold Mine (GGM) relies on electrical energy from the national grid and diesel power generators to generate electricity for various industrial applications. The plant currently spends a large amount of money on generating power from diesel generators. The total annual cost of power generation from diesel generators including lubricants is USD 56,057,990. The total annual fuel cost is USD 53,531,805 for a total of 54,985,473 liters per year. Most of the power generated by the generators is consumed in the industrial thermal processes. Thermal energy applications at the plant are thermal drying of the extracted ores to remove …
Wet Gas Metering Performance Using Conventional Flow Measurement Devices,
2025
Legal and Industrial Metrology, College of Business Education, P. O. Box 1968, Dar es Salaam, Tanzania
Wet Gas Metering Performance Using Conventional Flow Measurement Devices, Vitali Mwinyi
Tanzania Journal of Engineering and Technology (TJET)
The demand for and production of natural wet gas from wells has significantly risen in recent years. Although natural gas liquids hold substantial value in the oil and gas market, their presence in wet gas adversely affects gas metering, leading to overreading during measurement. A comprehensive study has been undertaken to formulate and enhance correlations for rectifying overreading in wet gas metering. Nevertheless, most current correlations are designed for horizontal configurations of traditional meters. Mitigating this constraint is crucial to consider the impact of gravity on pressure loss in vertically oriented systems. This study seeks to evaluate the efficacy of …
Fuzzy-Ahp Based Decision Support System For The Selection Of Optimal Maintenance Strategy For Meter Gauge Railway Infrastructure: A Review,
2025
Department of Mechanical and Industrial Engineering, College of Engineering and Technology, University of Dar es Salaam, P.O. Box 35131, Dar es Salaam, Tanzania.
Fuzzy-Ahp Based Decision Support System For The Selection Of Optimal Maintenance Strategy For Meter Gauge Railway Infrastructure: A Review, Hamisi J. Maulid
Tanzania Journal of Engineering and Technology (TJET)
There are many uncertainties and complexities associated with maintaining Meter Gauge Railway (MGR) infrastructure, which calls for a methodical approach to decision-making. The development and application of a fuzzy-AHP-based decision support system (DSS) to select the optimal maintenance strategy for the MGR are presented in this study. The review covers research from 2013 to 2023 and focusses on the use of Multi-Criteria Decision Making (MCDM) and Fuzzy Analytic Hierarchy Process (Fuzzy-AHP) techniques in railway infrastructure maintenance. To manage the inherent uncertainties and subjective judgements involved in maintenance decision-making, the Fuzzy-AHP methodology combines fuzzy logic with the Analytic Hierarchy Process (AHP). …
Evaluation Of Thermal And Emission Performances Of Briquettes Produced From Carbonized Corn Cob And Corn Husk,
2025
Faculty of Engineering, Department of Chemical Engineering, Eduardo Mondlane University, Maputo, P.O. Box 257, Mozambique
Evaluation Of Thermal And Emission Performances Of Briquettes Produced From Carbonized Corn Cob And Corn Husk, Karina S. Motani
Tanzania Journal of Engineering and Technology (TJET)
The Mozambican agro-industrial sector relies heavily on various crops, with maize being the most significant. During processing, substantial waste is generated, which is often discarded as organic matter or burned, contributing to environmental pollution and the loss of potential energy resources. This study evaluated the thermal and emission performance of briquettes made from carbonized corn cob (CCC) and carbonized corn husk (CCH), using cashew nut skin as a binder for clean cooking applications. The briquettes were assessed against firewood and charcoal as control fuels, focusing on several energy performance parameters: water boiling time (WBT), combustion index (CI), thermal efficiency (TE), …
Review On Gas-To-Liquids Conversion Technology: Lessons From Case Studies And Potential Strategies For Implementation In Tanzania,
2025
1Department of Mechanical and Industrial Engineering, University of Dar es Salaam, P.O Box 35131, Dar es Salaam, Tanzania
Review On Gas-To-Liquids Conversion Technology: Lessons From Case Studies And Potential Strategies For Implementation In Tanzania, Joseph H. Kihedu
Tanzania Journal of Engineering and Technology (TJET)
This review paper explores the transformative potential of Gas-to- Liquids (GTL) technology for harnessing Tanzania's vast natural gas resources. With significant discoveries of natural gas reserves totalling up to 57 Tcf in fields such as Songosongo, Mnazi Bay, Block 1, 2, 3 and 4. Tanzania is positioned to leverage GTL technology to convert these resources into high-value liquid fuels like gasoline, diesel and naphtha. Review of GTL process, its products and applications has been done. By analysing successful GTL projects globally and drawing lessons applicable to Tanzania, this paper provides strategic recommendations for policymakers and stakeholders to foster GTL development. …
Predicting The Influence Of Aggregate Size And Distribution On Cementitious Concrete Properties: A Review,
2025
Department of Mechanical and Industrial Engineering, University of Dar es Salaam, P.O Box 35131, Dar es Salaam, Tanzania
Predicting The Influence Of Aggregate Size And Distribution On Cementitious Concrete Properties: A Review, Innocent J. Macha
Tanzania Journal of Engineering and Technology (TJET)
Cement concrete has been in use for centuries as one of the primary construction materials. Its demand in the construction industry is expected to continue for several centuries before the full development of alternative products. However, one of the main areas of research interest is understanding how its constituents can be tailored to make its properties predictable to reduce risks associated with structural failures, reconstruction and reduced durability. These hindrances associated with cementitious concrete result from several attributes, including constituent material characteristics, mixing ratios and workmanship. Understanding the predictability of cement concrete properties requires computer modelling tools to provide reliable …
Towards Future Sustainable Infrastructure: The Role Of Technical Audit In Tanzania’S Public Works,
2025
Department of Mechanical and Industrial Engineering, University of Dar es Salaam, P.O Box 35131, Dar es Salaam, Tanzania
Towards Future Sustainable Infrastructure: The Role Of Technical Audit In Tanzania’S Public Works, George C. Haule
Tanzania Journal of Engineering and Technology (TJET)
This study aimed to investigate the vital role and impact of technical audits in promoting sustainable infrastructure development in Tanzania. The role and effects of technical audits in long-term infrastructure development were studied using a mixed-methods approach with both quantitative and qualitative parts. Data were collected through analysis of technical audit documentation, a semi-structured questionnaire, and stakeholder interviews. The study revealed the various dimensions of infrastructure investment projects, including initiation and planning, design, procurement of contractors and consultants, contract management, environment, health, and safety. The technical audit findings reported weaknesses or non-performance issues in infrastructure planning at the national level …
Root Cause Analysis Of Performance Degradation For An Xyz Thermal Power Plant In Tanzania,
2025
Department of Mechanical and Industrial Engineering, University of Dar es Salaam, P.O. Box 35131, Dar es Salaam, TANZANIA
Root Cause Analysis Of Performance Degradation For An Xyz Thermal Power Plant In Tanzania, Simon I. Marandu
Tanzania Journal of Engineering and Technology (TJET)
Thermal power plants in Tanzania have been experiencing performance degradation, typically arising from component and subsystem failures, which contribute to power system instability and unreliability. This paper presents a case study of the root causes of performance degradation of an XYZ thermal power plant. The study was conducted by reviewing plant documentations, including maintenance and operational data logbooks, and by standardising the approach through the adoption of ISO 14224:2016 for maintenance and reliability data exchange. Data evaluation was carried out using principal component analysis and scree plot analytical techniques to enhance the depth and accuracy of root cause identification. Additionally, …
Assessment Of Digital Solutions For Conformity Assessment Of Legally Controlled Measuring Instruments In Tanzania,
2025
Department of Legal and Industrial Metrology, College of Business Education, P.O Box 1968 Dar es Salaam, Tanzania
Assessment Of Digital Solutions For Conformity Assessment Of Legally Controlled Measuring Instruments In Tanzania, Faraja Nyoni
Tanzania Journal of Engineering and Technology (TJET)
The advent of state-of-the-art digital technologies since 2011 has led to the digital transformation of legal metrology practices to ensure the trustworthiness of software-controlled measuring instruments globally. Despite the digital transformation in legal metrological practices, the conformity assessment of legally controlled measuring instruments is manually done (i.e., paper-based) in Tanzania. The paper-based conformity assessment of legally controlled measuring instruments is prone to error and lacks efficiency and effectiveness. This study aimed to assess digital solutions for improving conformity assessment through a comprehensive survey conducted across various regions in Tanzania, targeting a stratified sample of 51 respondents from organizations involved in …
Optimizing The Processing Temperature For Synthesis Of Silver Nanoparticles Within Cellulose-Wool Keratin Supramolecular Matrix Using Butylmethylimmidazolium Chloride Ionic Liquid,
2025
Department of Mechanical and Industrial Engineering, College of Engineering and Technology, University of Dar es Salaam, P.O Box 35131, Dar es Salaam, Tanzania
Optimizing The Processing Temperature For Synthesis Of Silver Nanoparticles Within Cellulose-Wool Keratin Supramolecular Matrix Using Butylmethylimmidazolium Chloride Ionic Liquid, Ngesa E. Mushi
Tanzania Journal of Engineering and Technology (TJET)
To date, the synthesis of silver nanoparticles on the surface of cellulose and wool keratin biopolymer, while dissolved in ionic liquid, is attractive because of its biomedical potential. However, the optimal processing temperature for the nanoparticle formation is unclear. The previously reported temperature of approximately 120°C gives unpredictable results. The current study employs a combination of 50% cellulose and 50% keratin, along with 69 mg of silver chloride, in Butylmethylimidazolium Chloride BMImCl ionic liquid, using a single-pot process to produce a supramolecular film via non-derivatized mechanochemical interactions. The primary objective is to experimentally establish the processing temperature to achieve stable …
Development Of An Ann-Based Predictive Model For The Efficient Treatment Of Industrial Wastewater,
2025
Karshi State Technical University. Address: 20, Shahrisabz street, Shahrisabz, Uzbekistan, 181306. E-mail: [email protected], Phone: +998993015567;
Development Of An Ann-Based Predictive Model For The Efficient Treatment Of Industrial Wastewater, Alisher Khudoyberdi Ugli Rakhimov, Hasan Siddiq Ugli Murodov, Farrukh Bakhtiyorovich Igitov, Shuhrat Ahmadjonovich Mutalov, Jaloliddin Abdurazzakovich Eshbobaev
Chemical Technology, Control and Management
The effective removal of free chlorine ions from industrial wastewater is critical to ensure process safety, minimize equipment corrosion, and protect aquatic environments. In this study, a laboratory-scale activated carbon filtration system was developed and tested to treat chlorine-contaminated water collected from sludge collectors at industrial facilities. A total of 200 experimental trials were conducted under varied operational conditions, including changes in flow rate, initial chlorine concentration, pressure, pH, temperature, and activated carbon dosage. The resulting dataset was used to train a predictive model based on a feedforward backpropagation artificial neural network (ANN) implemented in MATLAB. The ANN model demonstrated …
Modeling Of Carbonization And Absorption Processes In Soda Ash Production,
2025
Tashkent state technical university. Adress: Uzbekistan, Tashkent city, University street 2. E-mail: [email protected];
Modeling Of Carbonization And Absorption Processes In Soda Ash Production, Nadirbek Rustambekovich Yusupbekov, Djalolitdin Paxritdinovich Mukhitdinov, Fatima Faxritdinovna Iskhakova
Chemical Technology, Control and Management
The article considers the problem of modeling the ammonia-soda process of soda ash production and presents the chemistry of sodium bicarbonate (NaHCO₃) formation. The equation of the kinetics of the reaction, used as a model of the carbonation process, is derived from a system of equations and its computer model is compiled. The system of differential equations reflecting the kinetics of the process was solved in the Mathcad package. The result of the modeling is presented. Based on the experimental data, the dependence of the absorption column performance on temperature and the dependence reflecting the optimal value of the absorption …
Design Of Automation For The Absorption Process In Hydrogen Purification From Carbon Dioxide,
2025
Tashkent State Technical University. Address: 2 Universitetskaya st., 100095, Tashkent city, Republic of Uzbekistan. E-mail: [email protected], Phone:+ 998-98-304-19-51;
Design Of Automation For The Absorption Process In Hydrogen Purification From Carbon Dioxide, Azizbek Nodirbekovich Yusupbekov, Saidamirkhon Oripov, Diyoraxon Zokirxon Qizi Oripova
Chemical Technology, Control and Management
This article discusses the automation of the methanol-acetone mixture absorption process to improve control efficiency. The existing local automatic control system (ACS) was upgraded to a cascade system, reducing component concentration deviations by 12% and decreasing the transition process time from 1606 to 1592 seconds. A mathematical model of the gas absorption process was developed, incorporating material balance equations, mass transfer equations, and transfer functions. The parameters of the PI controller were calculated to ensure system stability under ±10% coefficient variations. A comparative analysis of system characteristics before and after modernization confirmed a reduction in overshoot to 0% and an …
The Importance Of The Analog-To-Digital Converter In The Measurement System,
2025
Tashkent State Transport University, Tashkent, Uzbekistan. Adilxujaev 1 str. E-mail: [email protected];
The Importance Of The Analog-To-Digital Converter In The Measurement System, Aliev Ravshan, Anvar Djalilov
Chemical Technology, Control and Management
At the moment, many scientific researches are being conducted all over the world on the economical use of water and energy resources. Most of the scientific research works are aimed at improving measurement techniques and technologies, that is, increasing their accuracy. With this in mind, a high-precision analog-to-digital converter due to its unique metrological and technical characteristics was studied in this research paper. As a result of the study, it became clear that the use of a small-sized, high-precision sigma-delta analog-to-digital converter in modern measuring technology has a positive effect on its accurate and efficient operation.
Energy Conversion In Nuclear Batteries,
2025
Tashkent State Technical Unversity. Address: 2 Universitetskaya st., 100095, Tashkent city, Republic of Uzbekistan. E-mail: [email protected], Phone: +998-94-673-11-85.
Energy Conversion In Nuclear Batteries, Suhrob Vahob O'G'Li Ibrohimov
Chemical Technology, Control and Management
The transformation of energy in nuclear reactors or processes involves converting mass into energy as a result of nuclear reactions. This can include nuclear fission (splitting heavy atomic nuclei) or nuclear fusion (combining light nuclei). In these processes, energy is released in the form of heat, which can be used for electricity generation or other purposes.
Optimisation Of Astatic Controllers In Automatic Control Systems,
2025
Tashkent State Technical University. Address: 2 Universitetskaya st., 100095, Tashkent city, Republic of Uzbekistan. E-mail: [email protected], Phone: +998-90-359-52-68;
Optimisation Of Astatic Controllers In Automatic Control Systems, Isamiddin Xakimovich Siddikov, Dilnoza Maxamadjanovna Umurzakova
Chemical Technology, Control and Management
This article examines the influence of various factors on the efficiency of optimizing station controllers in automatic control systems. The main focus is on minimizing static errors and improving the reliability of controllers. Optimization methods for PID and PI2D controllers are discussed, including the use of modern approaches such as genetic algorithms. The necessity of compromise solutions to achieve high-quality system responses to various impacts is investigated. It was also suggested that there is a need for an integrated approach to setting up controllers in order to increase their reliability and flexibility in conditions of dynamically changing processes. …
Algorithms For Making Control Systems Based On Neural Network Technology To Automate Dynamic Plants,
2025
Tashkent state technical university. Adress: Uzbekistan, Tashkent city, University street 2. E-mail: [email protected],
Algorithms For Making Control Systems Based On Neural Network Technology To Automate Dynamic Plants, Jasur Sevinov, Abdishukurov Maqsudovich Shavkat
Chemical Technology, Control and Management
This paper examines the stages of multilayer neural network technology for the control and identification of dynamic systems. It is seen many ways to use multilayer neural networks in control systems. Neural controllers are based on several models and algorithms. Examples of such algorithms include the predictive model-based control algorithm, the Narma-L2 control algorithm, and the benchmark model-based control algorithm. These controllers illustrate various general ways to use multilayer neural networks in control systems. Common, standard linear control architectures have been proposed for many neural controllers.
Finite-Time Robust Anti-Disturbance Control For Steer-By-Wire System,
2025
Beijing Automotive Research Institute Co. , Ltd, Beijing 100176, China
Finite-Time Robust Anti-Disturbance Control For Steer-By-Wire System, Jingyi Zhang, Xin Chen, Jingang Ding, Jianguo Luo, Shuo Feng
Journal of System Simulation
Abstract: To eliminate the influence of parameter perturbations and external disturbances on the wheel angle tracking control performance of steer-by-wire (SbW) system, a fractional-order integral terminal sliding mode control scheme based on a finite-time disturbance observer is proposed. A sliding modebased second order finite-time disturbance observer (FDO) is designed to precisely estimate the total disturbance of the SbW system, and the estimated total disturbance is compensated into the system control input to reduce the wheel angle tracking error. A fractional-order fast integral terminal sliding mode control (FOFITSMC) scheme is designed to ensure fast convergence of the wheel angle tracking error …
Research On Obstacle Avoidance Of Substation Robot Based On Spatiotemporal Networks,
2025
Electric Power Planning Institute Co., Ltd, Beijing 100120, China
Research On Obstacle Avoidance Of Substation Robot Based On Spatiotemporal Networks, Chong Cheng, Lixia Wang, Songtao Duan, Xiaoguang Xiong, Xianjun Ge
Journal of System Simulation
Abstract: In order to improve the visual obstacle avoidance ability of substation robots in complex environments, a robot visual obstacle avoidance method based on spatiotemporal networks is proposed. The method utilizes traditional image processing techniques to enhance road information and designs a lightweight deep convolutional neural network structure to extract road features from a spatial domain perspective; based on the spatial characteristics of the road, a long short-term memory network is introduced to mine the changes in the road from a temporal perspective, and a classification regression prediction structure is used to predict the robot's obstacle avoidance direction and angle; …
Research On Scenario-Driven Virtual Simulation Test Method For Autonomous Escort Function Of Habor Tugs,
2025
School of Transportation and Logistics Engineering, Wuhan University of Technology, Wuhan 430063, China; State Key Laboratory of Maritime Technology and Safety, Wuhan University of Technology, Wuhan 430063, China
Research On Scenario-Driven Virtual Simulation Test Method For Autonomous Escort Function Of Habor Tugs, Shijie Li, Jialin Li, Jialun Liu, Chengqi Xu, Zhilin Dong
Journal of System Simulation
Abstract: In order to comprehensively construct the test scenarios and verify the reliability of the tugboat autonomous companionway function, a scenario-driven virtual simulation test method for the tugboat autonomous companionway function is proposed. Based on the relative heading, relative speed and relative position of the target ship and the tugboat, the test cases of the tugboat autonomous companionway scenario are generated, and the complexity of the test cases is evaluated by using the fifthorder Bessel curve. The autonomous companion navigation function of the tug is verified through simulation experiments on the complex typical test scenarios without and with obstacles. The …
