Effects Of Exit Doors And Number Of Passengers On Airport Evacuation Effeciency Using Agent Based Simulation,
2019
Embry-Riddle Aeronautical University - Daytona Beach
Effects Of Exit Doors And Number Of Passengers On Airport Evacuation Effeciency Using Agent Based Simulation, Jie Chen, Dahai Liu, Sirish Namilae, Sang-A Lee, Jennifer E. Thropp, Younho Seong
International Journal of Aviation, Aeronautics, and Aerospace
Many factors determine the efficiency of evacuation at an airport during emergencies. These factors are very complicated and many times, unpredictable. The Federal Aviation Administration provides numerous advisory circulars and regulations for managing airport evacuation. However, a thorough literature review suggests that research on airport evacuation is still very limited. A study was designed to simulate an airport evacuation to address this problem. This study selected a local certificated airport in the United States for this purpose. We developed and validated a situation model using AnyLogic to investigate evacuation time at this airport. Using different variables, such as the number …
Process Improvement Of Housing Loan Product In Thailand Commercial Bank,
2019
Faculty of Engineering
Process Improvement Of Housing Loan Product In Thailand Commercial Bank, Araya Santitrakulvech
Chulalongkorn University Theses and Dissertations (Chula ETD)
According to digital disruption has become key factor that stimulates changing in business nowadays including banking business. To respond through rapid change in customer behavior and become competitive among rivals, this research is aimed to improve business process of housing loan product in one of commercial banks in Thailand which is mainly operated in manual operation and paper process and believed to be main symptoms of bottleneck in lending process. The main objective of this research is to reduce lead time of housing loan business by going through the detail of business process to reveal wastes or non-value-added activities using …
A Study Of Price Elasticity Of Demand And Its Application In First Mile/Last Mile Service Collaboration Between Mass Transit And Ride Sharing Providers,
2019
Faculty of Engineering
A Study Of Price Elasticity Of Demand And Its Application In First Mile/Last Mile Service Collaboration Between Mass Transit And Ride Sharing Providers, Voragorn Warapiankul
Chulalongkorn University Theses and Dissertations (Chula ETD)
Since today, Bangkok faces the big pollution and low mobility. One main reason is Bangkok people tend to travel by automobiles instead of the transit. The main problem of Bangkok transit especially Bangkok metro is the low accessibility to travel to/from the transit nodes and between nodes or as called First Mile Last Mile problem. Moreover, Bangkok metro transit fare is claimed that is too expensive compared to the cost of living and minimum wages in Bangkok. This research aims to study the price elasticity of demand for Bangkok metro which is the indicator of fare demand management in Bangkok …
การประยุกต์ใช้ตะกอนจากอุตสาหกรรมเหมืองแร่หินเพื่อการผลิตอิฐเผา,
2019
คณะวิศวกรรมศาสตร์
การประยุกต์ใช้ตะกอนจากอุตสาหกรรมเหมืองแร่หินเพื่อการผลิตอิฐเผา, ณัฐวุฒิ ธงชัย
Chulalongkorn University Theses and Dissertations (Chula ETD)
งานวิจัยนี้มีวัตถุประสงค์เพื่อทำการวิเคราะห์หาสัดส่วนดินตะกอนจากอุตสาหกรรมเหมืองหินไปขึ้นรูปผลิตภัณฑ์เป็นอิฐดินตะกอนโดยใช้ดินเหนียวเป็นส่วนผสม งานวิจัยเริ่มจาก1) วิเคราะห์คุณสมบัติของตะกอนเพื่อหาองค์ประกอบของแร่ธาตุและสารประกอบที่พบในดินตะกอน 2) ทำการออกแบบการทดลองเพื่อพัฒนาผลิตภัณฑ์อิฐดินตะกอนจากเหมืองหิน โดยมีตัวแปรต้นได้แก่ สัดส่วนผสมระหว่างตะกอนจากเหมืองและดินเหนียวตั้งแต่ร้อยละ 40 ถึง80 โดยน้ำหนัก และเผาที่อุณหภูมิ 900, 1000 และ1100 องศาเซลเซียส 3) ทำการทดสอบคุณสมบัติเชิงกลและเชิงกายภาพของผลิตภัณฑ์แล้วสรุปผลงานวิจัย จากการศึกษาพบว่าที่อุณหภูมิ 1100 องศาเซลเซียส และสัดส่วนของดินตะกอนต่อดินเหนียวเป็น 60:40 ให้ความต้านแรงอัดสูงสุด เท่ากับ 43.67 เมกกะปาสคาล ซึ่งสูงกว่าอิฐมอญและอิฐดินเผา คิดเป็น 49.95 และ33.6 เปอร์เซ็นต์ ตามลำดับ ในขณะที่ค่าอัตราการดูดซึมน้ำของอิฐดินตะกอนจากเหมืองที่สัดส่วนดังกล่าวมีค่าเท่ากับ 11.53 เปอร์เซ็นต์ ซึ่งสูงกว่าอิฐมอญและอิฐดินเผาถึง 53.87 และ 67.63 เปอร์เซ็นต์ ส่วนค่าความหนาแน่นและค่าสูญเสียน้ำหนักของอิฐดินตะกอนจากเหมืองมีค่าเท่ากับ 1.37 กรัมต่อลูกบาศก์เซนติเมตร และ 17.37 เปอร์เซ็นต์ ตามลำดับ นอกจากนี้ต้นทุนการผลิตของอิฐดินตะกอนจากเหมืองมีค่าต่ำกว่าอิฐดินเผา 24.76 เปอร์เซ็นต์
Performance Study Of An Unconventional Breathresponse Papr Against A N95 Ffr And Conventional Paprs,
2019
West Virginia University
Performance Study Of An Unconventional Breathresponse Papr Against A N95 Ffr And Conventional Paprs, Huihui Yang
Graduate Theses, Dissertations, and Problem Reports (ETD)
Healthcare workers (HCWs) are the first responders when infectious pathogens occur. Powered air-purifying respirators (PAPRs) are one of the most widely used personal protective equipment for healthcare workers. Currently, few studies have been performed with HCWs in the actual healthcare work environments to assess discomforts, acceptance and protective efficiency towards wearing and use of PAPRs. The main purpose of this dissertation was to introduce and assess a brand new unconventional PAPR (Koken breath-response PAPR). The protection performance and user preferance of this unconventional PAPR were studided and compared to that of a N95 FFR and traditional PAPRs.
Firstly, a laboratory …
Pharmaceutical Scheduling Using Simulated Annealing And Steepest Descent Method,
2019
West Virginia University
Pharmaceutical Scheduling Using Simulated Annealing And Steepest Descent Method, Bryant Jamison Spencer
Graduate Theses, Dissertations, and Problem Reports (ETD)
In the pharmaceutical manufacturing world, a deadline could be the difference between losing a multimillion-dollar contract or extending it. This, among many other reasons, is why good scheduling methods are vital. This problem report addresses Flexible Flowshop (FF) scheduling using Simulated Annealing (SA) in conjunction with the Steepest Descent heuristic (SD).
FF is a generalized version of the flowshop problem, where each product goes through S number of stages, where each stage has M number of machines. As opposed to a normal flowshop problem, all ‘jobs’ do not have to flow in the same sequence from stage to stage. The …
Space Dynamics Laboratory Payload Challenge: Autonomous Water Sampling Uav,
2019
The University of Akron
Space Dynamics Laboratory Payload Challenge: Autonomous Water Sampling Uav, Thomas Wheeler, Zachary Williams, Joseph Stack
Williams Honors College, Honors Research Projects
The following report has been completed over the course of the Fall 2018 and Spring 2019 semesters at The University of Akron by Joseph P. Stack (Aerospace Systems Engineering), Thomas J. Wheeler (Mechanical Engineering) and Zachary M. Williams (Mechanical Engineering). The purpose of this project was to create a payload system for the Akronauts Rocket Design Team to use at the Intercollegiate Rocket Engineering Competition (IREC) Spaceport America Cup. The Competition as a challenge that is sponsored by Space Dynamics Laboratory specifically regarding payload systems. The challenge in very open-ended and allows student to identify their own scientific experiment and …
Analysis Of Bus Ride Comfort Using Smartphone Sensor Data,
2019
Singapore Management University
Analysis Of Bus Ride Comfort Using Smartphone Sensor Data, Hoong-Chor Chin, Xingting Pang, Zhaoxia Wang
Research Collection School Of Computing and Information Systems
Passenger comfort is an important indicator that is often used to measure the quality of public transport services. It may also be a crucial factor in the passenger’s choice of transport mode. The typical method of assessing passenger comfort is through a passenger interview survey which can be tedious. This study aims to investigate the relationship between bus ride comfort based on ride smoothness and the vehicle’s motion detected by the smartphone sensors. An experiment was carried out on a bus fixed route within the University campus where comfort levels were rated on a 3-point scale and recorded at 5-second …
The Development Of The Human-Automation Behavioral Interaction Task (Habit) Analysis Framework,
2019
Wright State University
The Development Of The Human-Automation Behavioral Interaction Task (Habit) Analysis Framework, Isabelle Catherine Baird
Browse all Theses and Dissertations
Complex systems involve the collaboration of automated agents and goal-oriented human operators in a dynamic environment, and dynamic environments required dynamic automation. The implementation of automation fundamentally changes the nature of the cognitive demands by means of changing the role of the human operator. The augmentation of operator situation awareness has become a major design objective in the development of human-automated systems. Extensive literature identified the out-of-the-loop performance problem as a human-automation interaction challenge. This thesis presents the Human-Automation Behavioral Interaction Task (HABIT) Analysis, as a novel approach to assessing human-automation interaction challenges, such as out-of-the-loop consequences. The novel framework …
Agent-Based Simulation Of Artificial-Intelligence-Assisted Transfer Of Care,
2019
Wright State University
Agent-Based Simulation Of Artificial-Intelligence-Assisted Transfer Of Care, Paul B. Stone
Browse all Theses and Dissertations
This study demonstrates the application of Agent-Based Simulation as a potential training aid for Transfer of Care (ToC) between EMS and a hospital triage department. The specific aim was to develop a simulation to increase the efficiency and accountability of information communication during ToC to test the suitability of Agent-Based Simulation to address training requirements in complex, health provision settings. This paper focuses on the design of the training simulation, including the development of individual agents within the simulation through the user interface elements and the evaluation and verification of the prototype simulator. The primary objective is for the simulation …
A Model To Optimize Major Trauma Network Considering Patient Safety,
2019
Wright State University
A Model To Optimize Major Trauma Network Considering Patient Safety, Monit D. Vaishnav
Browse all Theses and Dissertations
Trauma is any physical injury that has the potential to cause prolonged disability and death if the appropriate level of care is not administered in a timely fashion. Existing approaches in the literature and by the American College of Surgeons (ACS) to optimize the network of trauma centers are limiting. To address this challenge, we introduce the Trauma Network Design Problem, a bi-objective mathematical model that aims at determining the optimal trauma network by minimizing the weighted sum of mistriages. We use the trauma network data from 2012 for the state of Ohio to illustrate the use of our approach …
Analysis Of User Preference With N95 And Powered Air-Purifying Respirators In A Healthcare Work Environment,
2019
West Virginia University
Analysis Of User Preference With N95 And Powered Air-Purifying Respirators In A Healthcare Work Environment, Brittany Renee Carver
Graduate Theses, Dissertations, and Problem Reports (ETD)
For those working in the healthcare field, personal protective equipment is vital. Healthcare workers are often first responders when it comes to dealing with patients who are infected or when a disease outbreak occurs. The Occupational Safety and Health Administration (OSHA) requires all healthcare operations to provide employee protection against blood borne pathogens. With the increase of life-threatening disease outbreaks, such as SARS in 2003 and Ebola in 2014, it is of the upmost importance to make sure respirators are best suited for users and acceptable for long term use. It has been shown through previous studies that due to …
Weld Penetration Identification Based On Convolutional Neural Network,
2019
University of Kentucky
Weld Penetration Identification Based On Convolutional Neural Network, Chao Li
Theses and Dissertations--Electrical and Computer Engineering
Weld joint penetration determination is the key factor in welding process control area. Not only has it directly affected the weld joint mechanical properties, like fatigue for example. It also requires much of human intelligence, which either complex modeling or rich of welding experience. Therefore, weld penetration status identification has become the obstacle for intelligent welding system. In this dissertation, an innovative method has been proposed to detect the weld joint penetration status using machine-learning algorithms.
A GTAW welding system is firstly built. Project a dot-structured laser pattern onto the weld pool surface during welding process, the reflected laser pattern …
Curricular Optimization: Solving For The Optimal Student Success Pathway,
2019
University of Kentucky
Curricular Optimization: Solving For The Optimal Student Success Pathway, William G. Thompson-Arjona
Theses and Dissertations--Electrical and Computer Engineering
Considering the significant investment of higher education made by students and their families, graduating in a timely manner is of the utmost importance. Delay attributed to drop out or the retaking of a course adds cost and negatively affects a student’s academic progression. Considering this, it becomes paramount for institutions to focus on student success in relation to term scheduling.
Often overlooked, complexity of a course schedule may be one of the most important factors in whether or not a student successfully completes his or her degree. More often than not students entering an institution as a first time full …
A Game-Theoretic Approach To Share The Costs Of Cooperating Healthcare Networks,
2019
University of Northern Colorado
A Game-Theoretic Approach To Share The Costs Of Cooperating Healthcare Networks, Jay M. Lightfoot
Journal of International Technology and Information Management
The growing demand for healthcare services combined with the disarray in the health insurance market in the United States has created a situation where rival health networks are aggressively competing by building duplicate health facilities and providing redundant services in localized geographic regions. Unfortunately, this strategy can reduce the quality of patient care and decrease profits (Kaissi & Charland, 2013). A solution to this problem is for health networks to cooperate and share healthcare equipment, facilities, and personnel. Toward that end, this paper presents a game-theoretic method that can share these costs in a fair, efficient, and repeatable manner.
A Systematic Review Of Process Modelling Methods And Its Application For Personalised Adaptive Learning Systems,
2019
University of East London
A Systematic Review Of Process Modelling Methods And Its Application For Personalised Adaptive Learning Systems, Kingsley Okoye
Journal of International Technology and Information Management
This systematic review work investigates current literature and methods that are related to the application of process mining and modelling in real-time particularly as it concerns personalisation of learning systems, or yet still, e-content development. The work compares available studies based on the domain area of study, the scope of the study, methods used, and the scientific contribution of the papers and results. Consequently, the findings of the identified papers were systematically evaluated in order to point out potential confounding variables or flaws that might have been overlooked or missing in the current literature. In turn, a critical structured analysis …
Table Of Contents Jitim Vol 27 Issue 4, 2018-2019,
2019
California State University, San Bernardino
Table Of Contents Jitim Vol 27 Issue 4, 2018-2019
Journal of International Technology and Information Management
ToC JITIM - Special Issue on ICT4D
Table Of Contents Jitim Vol 28 Issue 1, 2019,
2019
California State University, San Bernardino
Table Of Contents Jitim Vol 28 Issue 1, 2019
Journal of International Technology and Information Management
Table of contents
Agent-Based Modeling And Simulation Approaches In Stem Education Research,
2019
Eastern Michigan University
Agent-Based Modeling And Simulation Approaches In Stem Education Research, Shanna R. Simpson-Singleton, Xiangdong Che
Journal of International Technology and Information Management
The development of best practices that deliver quality STEM education to all students, while minimizing achievement gaps, have been solicited by several national agencies. ABMS is a feasible approach to provide insight into global behavior based upon the interactions amongst agents and environments. In this review, we systematically surveyed several modeling and simulation approaches and discussed their applications to the evaluation of relevant theories in STEM education. It was found that ABMS is optimal to simulate STEM education hypotheses, as ABMS will sensibly present emergent theories and causation in STEM education phenomena if the model is properly validated and calibrated.
A Multilayer Secured Messaging Protocol For Rest-Based Services,
2019
Dr
A Multilayer Secured Messaging Protocol For Rest-Based Services, Idongesit Efaemiode Eteng
Journal of International Technology and Information Management
The lack of descriptive language and security guidelines poses a big challenge to implementing security in Representational State Transfer (REST) architecture. There is over reliance on Secure Socket Layer/Transport Layer Security (SSL/TLS), which in recent times has proven to be fallible. Some recent attacks against SSL/TLS include: POODLE, BREACH, CRIME, BEAST, FREAK etc. A secure messaging protocol is implemented in this work. The protocol is further compiled into a reusable library which can be called by other REST services. Using Feature Driven Development (FDD) software methodology, a two layer security protocol was developed. The first layer is a well hardened …
