Evaluation Of Thermal And Emission Performances Of Briquettes Produced From Carbonized Corn Cob And Corn Husk,
2025
Faculty of Engineering, Department of Chemical Engineering, Eduardo Mondlane University, Maputo, P.O. Box 257, Mozambique
Evaluation Of Thermal And Emission Performances Of Briquettes Produced From Carbonized Corn Cob And Corn Husk, Karina S. Motani
Tanzania Journal of Engineering and Technology (TJET)
The Mozambican agro-industrial sector relies heavily on various crops, with maize being the most significant. During processing, substantial waste is generated, which is often discarded as organic matter or burned, contributing to environmental pollution and the loss of potential energy resources. This study evaluated the thermal and emission performance of briquettes made from carbonized corn cob (CCC) and carbonized corn husk (CCH), using cashew nut skin as a binder for clean cooking applications. The briquettes were assessed against firewood and charcoal as control fuels, focusing on several energy performance parameters: water boiling time (WBT), combustion index (CI), thermal efficiency (TE), …
Comprehensive Review Of Sensible Thermal Storage Systems For Cooking Applications,
2025
Department of Energy and Process Engineering, Norwegian University of Science and Technology, Norway
Comprehensive Review Of Sensible Thermal Storage Systems For Cooking Applications, Anna K. Shariishoy
Tanzania Journal of Engineering and Technology (TJET)
This paper reviewed the sensible thermal storage systems specifically designed for cooking applications. The review focuses on the characteristics of storage materials, their practical applications, and the overall performance of the systems. The review consolidated an array of experimental and numerical research published across various sources such as journals, conferences, books, online resources, and professional reports. A systematic review is used to reach the conclusion of this paper. Significant findings from this study include the wide range of storage capacities attained from small-scale systems that can store ~1–5 MJ of energy for a single meal to bigger systems that can …
Review On Gas-To-Liquids Conversion Technology: Lessons From Case Studies And Potential Strategies For Implementation In Tanzania,
2025
1Department of Mechanical and Industrial Engineering, University of Dar es Salaam, P.O Box 35131, Dar es Salaam, Tanzania
Review On Gas-To-Liquids Conversion Technology: Lessons From Case Studies And Potential Strategies For Implementation In Tanzania, Joseph H. Kihedu
Tanzania Journal of Engineering and Technology (TJET)
This review paper explores the transformative potential of Gas-to- Liquids (GTL) technology for harnessing Tanzania's vast natural gas resources. With significant discoveries of natural gas reserves totalling up to 57 Tcf in fields such as Songosongo, Mnazi Bay, Block 1, 2, 3 and 4. Tanzania is positioned to leverage GTL technology to convert these resources into high-value liquid fuels like gasoline, diesel and naphtha. Review of GTL process, its products and applications has been done. By analysing successful GTL projects globally and drawing lessons applicable to Tanzania, this paper provides strategic recommendations for policymakers and stakeholders to foster GTL development. …
The Importance Of The Analog-To-Digital Converter In The Measurement System,
2025
Tashkent State Transport University, Tashkent, Uzbekistan. Adilxujaev 1 str. E-mail: [email protected];
The Importance Of The Analog-To-Digital Converter In The Measurement System, Aliev Ravshan, Anvar Djalilov
Chemical Technology, Control and Management
At the moment, many scientific researches are being conducted all over the world on the economical use of water and energy resources. Most of the scientific research works are aimed at improving measurement techniques and technologies, that is, increasing their accuracy. With this in mind, a high-precision analog-to-digital converter due to its unique metrological and technical characteristics was studied in this research paper. As a result of the study, it became clear that the use of a small-sized, high-precision sigma-delta analog-to-digital converter in modern measuring technology has a positive effect on its accurate and efficient operation.
Algorithms For Making Control Systems Based On Neural Network Technology To Automate Dynamic Plants,
2025
Tashkent state technical university. Adress: Uzbekistan, Tashkent city, University street 2. E-mail: [email protected],
Algorithms For Making Control Systems Based On Neural Network Technology To Automate Dynamic Plants, Jasur Sevinov, Abdishukurov Maqsudovich Shavkat
Chemical Technology, Control and Management
This paper examines the stages of multilayer neural network technology for the control and identification of dynamic systems. It is seen many ways to use multilayer neural networks in control systems. Neural controllers are based on several models and algorithms. Examples of such algorithms include the predictive model-based control algorithm, the Narma-L2 control algorithm, and the benchmark model-based control algorithm. These controllers illustrate various general ways to use multilayer neural networks in control systems. Common, standard linear control architectures have been proposed for many neural controllers.
Development Of An Ann-Based Predictive Model For The Efficient Treatment Of Industrial Wastewater,
2025
Karshi State Technical University. Address: 20, Shahrisabz street, Shahrisabz, Uzbekistan, 181306. E-mail: [email protected], Phone: +998993015567;
Development Of An Ann-Based Predictive Model For The Efficient Treatment Of Industrial Wastewater, Alisher Khudoyberdi Ugli Rakhimov, Hasan Siddiq Ugli Murodov, Farrukh Bakhtiyorovich Igitov, Shuhrat Ahmadjonovich Mutalov, Jaloliddin Abdurazzakovich Eshbobaev
Chemical Technology, Control and Management
The effective removal of free chlorine ions from industrial wastewater is critical to ensure process safety, minimize equipment corrosion, and protect aquatic environments. In this study, a laboratory-scale activated carbon filtration system was developed and tested to treat chlorine-contaminated water collected from sludge collectors at industrial facilities. A total of 200 experimental trials were conducted under varied operational conditions, including changes in flow rate, initial chlorine concentration, pressure, pH, temperature, and activated carbon dosage. The resulting dataset was used to train a predictive model based on a feedforward backpropagation artificial neural network (ANN) implemented in MATLAB. The ANN model demonstrated …
Strategies For Overcoming Product Certification Challenges Faced By Food Manufacturing Small And Medium Enterprises In Tanzania,
2025
Department of Mechanical and Industrial Engineering, University of Dar es Salaam, P.O Box 35131, Dar es Salaam, Tanzania
Strategies For Overcoming Product Certification Challenges Faced By Food Manufacturing Small And Medium Enterprises In Tanzania, Peresi M. Bulemo
Tanzania Journal of Engineering and Technology (TJET)
Small and Medium-sized Enterprises (SMEs) in Tanzania face significant regulatory challenges within bureaucratic, costly, and centralized environments. These challenges contribute to an increase in unregistered enterprises and substandard products in the market. This study aimed to address the challenges SMEs encounter in obtaining product certification to improve their product quality and market competitiveness. A mixed-methods approach was employed, combining qualitative and quantitative research through surveys, interviews, and document analysis, with respondents from the Tanzania Bureau of Standards (TBS), Small Industries Development Organization (SIDO), and SMEs in the food manufacturing sector. Data analysis was conducted using SPSS and JASP. Findings revealed …
Predicting The Influence Of Aggregate Size And Distribution On Cementitious Concrete Properties: A Review,
2025
Department of Mechanical and Industrial Engineering, University of Dar es Salaam, P.O Box 35131, Dar es Salaam, Tanzania
Predicting The Influence Of Aggregate Size And Distribution On Cementitious Concrete Properties: A Review, Innocent J. Macha
Tanzania Journal of Engineering and Technology (TJET)
Cement concrete has been in use for centuries as one of the primary construction materials. Its demand in the construction industry is expected to continue for several centuries before the full development of alternative products. However, one of the main areas of research interest is understanding how its constituents can be tailored to make its properties predictable to reduce risks associated with structural failures, reconstruction and reduced durability. These hindrances associated with cementitious concrete result from several attributes, including constituent material characteristics, mixing ratios and workmanship. Understanding the predictability of cement concrete properties requires computer modelling tools to provide reliable …
Towards Metrology 4.0 In Developing Countries’ Manufacturing Industries,
2025
Department of Legal and Industrial Metrology, College of Business Education, P.O Box 1968 Dar es Salaam, Tanzania
Towards Metrology 4.0 In Developing Countries’ Manufacturing Industries, Jailos Nzumile
Tanzania Journal of Engineering and Technology (TJET)
A systematic literature review was conducted to unveil the status of the digital transformation of metrology in developing countries, as they are lagging in utilising fourth industrial revolution (IR4.0) technologies to transform manufacturing industries. A PRISMA technique was employed using various keywords to identify, screen, and select the relevant literature. Forty publications were selected for the review, mainly discussing IR 4.0 technologies in metrological operations. The results indicate that the digital transformation of metrology has yet to be initiated in developing countries. However, the employment of IR4.0 technologies in advancing metrological operations in manufacturing industries is mostly discussed in the …
Towards Future Sustainable Infrastructure: The Role Of Technical Audit In Tanzania’S Public Works,
2025
Department of Mechanical and Industrial Engineering, University of Dar es Salaam, P.O Box 35131, Dar es Salaam, Tanzania
Towards Future Sustainable Infrastructure: The Role Of Technical Audit In Tanzania’S Public Works, George C. Haule
Tanzania Journal of Engineering and Technology (TJET)
This study aimed to investigate the vital role and impact of technical audits in promoting sustainable infrastructure development in Tanzania. The role and effects of technical audits in long-term infrastructure development were studied using a mixed-methods approach with both quantitative and qualitative parts. Data were collected through analysis of technical audit documentation, a semi-structured questionnaire, and stakeholder interviews. The study revealed the various dimensions of infrastructure investment projects, including initiation and planning, design, procurement of contractors and consultants, contract management, environment, health, and safety. The technical audit findings reported weaknesses or non-performance issues in infrastructure planning at the national level …
Root Cause Analysis Of Performance Degradation For An Xyz Thermal Power Plant In Tanzania,
2025
Department of Mechanical and Industrial Engineering, University of Dar es Salaam, P.O. Box 35131, Dar es Salaam, TANZANIA
Root Cause Analysis Of Performance Degradation For An Xyz Thermal Power Plant In Tanzania, Simon I. Marandu
Tanzania Journal of Engineering and Technology (TJET)
Thermal power plants in Tanzania have been experiencing performance degradation, typically arising from component and subsystem failures, which contribute to power system instability and unreliability. This paper presents a case study of the root causes of performance degradation of an XYZ thermal power plant. The study was conducted by reviewing plant documentations, including maintenance and operational data logbooks, and by standardising the approach through the adoption of ISO 14224:2016 for maintenance and reliability data exchange. Data evaluation was carried out using principal component analysis and scree plot analytical techniques to enhance the depth and accuracy of root cause identification. Additionally, …
Effects Of Cutting Conditions On Tool Temperature And Material Removal Rate In Turning Operations,
2025
Department of Mechanical and Industrial Engineering, University of Dar es Salaam, P.O. Box 35131, Dar es Salaam, TANZANIA
Effects Of Cutting Conditions On Tool Temperature And Material Removal Rate In Turning Operations, Simon I. Marandu
Tanzania Journal of Engineering and Technology (TJET)
Cutting conditions in manufacturing processes have effects on tool temperature and material removal rate. The objective of this study was to investigate the effects of cutting conditions namely spindle speed, feed rate, depth of cut and tool nose radius on tool temperature and material removal rate in turning operations. A total of 81 experiments were conducted to measure tool temperature and material removal rate in order to determine the effects of cutting conditions on tool temperature and material removal rate using ANOVA and regression analysis. The results show that tool nose radius, depth of cut, and spindle speed are significant …
Potential Use Of Pump As Turbine Coupled To Self-Excited Induction Generator For Micro-Hydro Cooking And Cooling Applications,
2025
Mechanical & Industrial Engineering Department, University of Dar es Salaam, TANZANIA
Potential Use Of Pump As Turbine Coupled To Self-Excited Induction Generator For Micro-Hydro Cooking And Cooling Applications, Emanuel J. Nyirenda
Tanzania Journal of Engineering and Technology (TJET)
Clean cooking and efficient cooling in developing countries have recently become areas of great focus. Further, the environmental impact of flooding in high-capacity hydroelectric plants has become a major concern. As a result, there is growing emphasis on developing sustainable and decentralized energy solutions, focusing on the potential of micro-hydro systems, especially in rural and remote areas. Although there are several alternative energy generation methods, their application is not straightforward. One of the latest technologies under research is using pumps as turbines coupled to an induction generator. This paper explores through a rigorous experimental approach the possibility of using a …
The Role Of Internal Factors On Vehicular Mobility,
2025
Department of Mechanical and Industrial Engineering, University of Dar es Salaam, P.O Box 35131, Dar es Salaam, Tanzania
The Role Of Internal Factors On Vehicular Mobility, Aziz Mdimi
Tanzania Journal of Engineering and Technology (TJET)
Vehicle mobility internal factors are influenced by the performance state of the road surface quality, governor, engine, gear train, differential unit and mobility unit. Studies on vehicular mobility models exist for off-road external factors but absent on on-road internal factors. The on-road internal factors model describes the vehicular mobility performance as a function of internal factors. In the current undertaking, results are generated by the determination of mobility performance characteristics with the application of 2nd Order Ordinary Differential Equations and using Laplace operator with MATLAB Software simulation. The effect of road surface against the time taken varies accordingly. At a …
Comparative Analysis Of The Efficiency Of Reverse Osmosis And Hydroxyapatite For Fluoride Removal In Water: A Case Of Auwsa,
2025
Department of Mechanical and Industrial Engineering, University of Dar es Salaam, P.O Box 35131, Dar es Salaam, Tanzania
Comparative Analysis Of The Efficiency Of Reverse Osmosis And Hydroxyapatite For Fluoride Removal In Water: A Case Of Auwsa, Innocent J. Macha
Tanzania Journal of Engineering and Technology (TJET)
Water treatment technology selection depends on contaminant type and budget. Fluoride removal from water is particularly challenging, requiring non-conventional treatment technologies (Radwan, 2023). Several regions in Tanzania, including Arusha City, are affected by fluoride contamination. With a population of 617,631 (Census, 2022), only 117,763 people currently have access to clean water supplied by AUWSA. This study aimed to compare the efficiency of Reverse Osmosis (RO) and Hydroxyapatite (HAP) in fluoride removal as a strategy to address water quality and supply challenges. Experiments were conducted using 6 m³ of raw water with fluoride concentrations ranging from 5.1 mg/L to 6.83 mg/L, …
Towards Effective Academia-Industry Collaborations: The Case Of Higher Learning Institutions In Tanzania,
2025
Department of Computer Sciences and Engineering, University of Dar es Salaam, P.O. Box 33335, Dar es Salaam, Tanzania
Towards Effective Academia-Industry Collaborations: The Case Of Higher Learning Institutions In Tanzania, Fatuma S. Ikuja
Tanzania Journal of Engineering and Technology (TJET)
Industries are the main consumers of products from higher learning institutions (HLIs); graduates for employment and research outputs for socio-economic development. Research outputs from HLIs are commercialized as services or products facilitated by academia-industry collaborations. The collaborations are expected to address mismatch between labour market needs and HLIs’ products, which has resulted in graduates’ employability challenges. Despite their importance, effective academia-industry collaborations remain challenging. This study explores the effectiveness of Academia-Industry collaborations established by HLIs in implementing the Higher Education Economic Transformation (HEET) project (2021-2026) in Tanzania. One of the project objectives is to build functional linkages between industry and …
The Royal Academy Of Engineering, Uk And The Enriching Of Engineering Education Training And Practice Programme In Sub-Saharan Africa,
2025
Department of Mechanical and Industrial Engineering, College of Engineering and Technology, University of Dar es Salaam, P.O Box 35131, Dar es Salaam, Tanzania
The Royal Academy Of Engineering, Uk And The Enriching Of Engineering Education Training And Practice Programme In Sub-Saharan Africa, Bavo B. Nyichomba
Tanzania Journal of Engineering and Technology (TJET)
This paper elucidates initiatives taken by the Royal Academy of Engineering, UK, to overcome barriers in education and training in Sub-Sahara African higher learning engineering institutions. The said barriers include mismatches of curriculum, ineffectual teaching and learning and little exposure of academic staff to engineering practice. In order to overcome such barriers, the Royal Academy of Engineering established the two programmes in the region. The first one, Enriching Engineering Education Programme (EEEP) from 2014/15 to 2015/16 where the University of Dar es Salaam coordinated this programme as a hub for East African universities namely; Makerere University (Uganda), Moi University (Kenya), …
Performance Dynamics Of Activated Carbon-Methanol Pair In Adsorption Refrigeration Systems,
2025
Department of Mechanical and Industrial Engineering, University of Dar es Salaam, P.O Box 35131, Dar es Salaam, Tanzania
Performance Dynamics Of Activated Carbon-Methanol Pair In Adsorption Refrigeration Systems, Ibrahim J. Mwasubila
Tanzania Journal of Engineering and Technology (TJET)
Adsorption refrigeration systems have shown potential for addressing the adverse effects of traditional compressor-based refrigeration systems. Adsorption refrigeration systems that utilise activated carbon and methanol demonstrate good performance, especially at temperatures below 0 °C. This combination significantly improves the cooling performance of the system, making it a dependable option for freezing applications. Despite having the potential to meet cooling demand and be eco-friendly, the adsorption refrigeration system has several drawbacks that hinder its commercialisation. This paper discusses the properties of the activated carbon methanol pair in the adsorption refrigeration system. The focus is on the desorption temperature, thermal stress, repeatability …
Assessment Of Digital Solutions For Conformity Assessment Of Legally Controlled Measuring Instruments In Tanzania,
2025
Department of Legal and Industrial Metrology, College of Business Education, P.O Box 1968 Dar es Salaam, Tanzania
Assessment Of Digital Solutions For Conformity Assessment Of Legally Controlled Measuring Instruments In Tanzania, Faraja Nyoni
Tanzania Journal of Engineering and Technology (TJET)
The advent of state-of-the-art digital technologies since 2011 has led to the digital transformation of legal metrology practices to ensure the trustworthiness of software-controlled measuring instruments globally. Despite the digital transformation in legal metrological practices, the conformity assessment of legally controlled measuring instruments is manually done (i.e., paper-based) in Tanzania. The paper-based conformity assessment of legally controlled measuring instruments is prone to error and lacks efficiency and effectiveness. This study aimed to assess digital solutions for improving conformity assessment through a comprehensive survey conducted across various regions in Tanzania, targeting a stratified sample of 51 respondents from organizations involved in …
Optimizing The Processing Temperature For Synthesis Of Silver Nanoparticles Within Cellulose-Wool Keratin Supramolecular Matrix Using Butylmethylimmidazolium Chloride Ionic Liquid,
2025
Department of Mechanical and Industrial Engineering, College of Engineering and Technology, University of Dar es Salaam, P.O Box 35131, Dar es Salaam, Tanzania
Optimizing The Processing Temperature For Synthesis Of Silver Nanoparticles Within Cellulose-Wool Keratin Supramolecular Matrix Using Butylmethylimmidazolium Chloride Ionic Liquid, Ngesa E. Mushi
Tanzania Journal of Engineering and Technology (TJET)
To date, the synthesis of silver nanoparticles on the surface of cellulose and wool keratin biopolymer, while dissolved in ionic liquid, is attractive because of its biomedical potential. However, the optimal processing temperature for the nanoparticle formation is unclear. The previously reported temperature of approximately 120°C gives unpredictable results. The current study employs a combination of 50% cellulose and 50% keratin, along with 69 mg of silver chloride, in Butylmethylimidazolium Chloride BMImCl ionic liquid, using a single-pot process to produce a supramolecular film via non-derivatized mechanochemical interactions. The primary objective is to experimentally establish the processing temperature to achieve stable …
