Optimal Operation For Park Integrated Energy System Considering Interruptible Loads,
2022
School of Mechanical Engineering, University of Shanghai for Science and Technology, Shanghai 200093, China;
Optimal Operation For Park Integrated Energy System Considering Interruptible Loads, Lixin Ma, Ying Cheng
Journal of System Simulation
Abstract: The operating mode of thermal power generation units has certain limitations in peak shaving capacity. Interruptible load (IL), as a power resource to be tapped, can be applied to the park integrated energy management and microgrid systems to guide users to reduce peak electricity consumption. The IL function is introduced into the park integrated energy system with combined heat and power units to improve the system's peak shaving ability, and the corresponding model is established with the optimization goal of economy. Taking an ecological park of northern region as the example, the adaptive chaotic particle swarm algorithm is used …
Radar Remote Sensing Data Augmentation Method Based On Generative Adversarial Network,
2022
Beijing Institute of Remote Sensing Equipment, Beijing 100854, China;
Radar Remote Sensing Data Augmentation Method Based On Generative Adversarial Network, Xu Kang, Xiaofeng Zhang
Journal of System Simulation
Abstract: In the research field of radar remote sensing, both the completeness and diversity of radar data samples cannot meet the requirement of effective training of deep learning models, and the models are prone to over-fitting, which significantly limits the wide application of deep learning techniques in this field. Targeting on the needs of intelligent application in radar remote sensing, a microwave imaging radar suited data augmentation method is proposed to solve the issue of insufficient radar data samples by leveraging the general framework of generative adversarial network. Aiming at the features of radar samples being not obvious, the label …
A Devs-Based Formal Description Method For Complex Product Behavior Models,
2022
Department of Automation, Tsinghua University, Beijing 100084, China;
A Devs-Based Formal Description Method For Complex Product Behavior Models, Qingquan Lin, Jiaran Yang, Heming Zhang
Journal of System Simulation
Abstract: For the online optimization of pedestrian flow control in subway station, an algorithm frame for pedestrian flow control in subway station based on machine learning is designed. The pedestrian flow control process of a subway station during morning rush hour is selected,and the agent-based model is built to simulate the control process. The training data is collected through the multiple runs of the model, which is used as the input of deep reinforcement learning network, and the mature net is obtained through adequate training to provide the optimizing scheduling policy. Linking the actual data with the mature net …
An Unmanned Swarm Search Method Based On Human-Robot Cooperation,
2022
National University of Defense Technology, Changsha 410073, China;
An Unmanned Swarm Search Method Based On Human-Robot Cooperation, Xin Zhou, Weiping Wang, Yifan Zhu, Tao Wang, Tian Jing
Journal of System Simulation
Abstract: Human-robot collaboration is a research hotspot and the human and unmanned swarm collaborative search is a typical scenario. It can carry out the more complex tasks by combining the human complex reasoning capabilities with repeated and precise execution capabilities of unmanned swarm. Based on the high-value target search of the uncertain scenarios, the concept definition for the collaborative search of human and unmanned swarm is given. A multi-agent dynamic programming model under uncertain with unknown prior knowledge is proposed, established to describe how the multi-agent system carries out the search under human support. A dynamic programming algorithm …
Research On Space Launch Visualization Simulation Analysis Technology And Application,
2022
1.Beijing Institute of Tracking and Communication Technology, Beijing 100094, China;
Research On Space Launch Visualization Simulation Analysis Technology And Application, Feng Wu, Xiuluo Liu, Jia Wang, Yang Liu, Sujiang Li, Yan Zhong
Journal of System Simulation
Abstract: Through the typical cases in the field of military, society, manufacturing etc., this paper introduces the concept and features of complex engineering system of systems as well as the significance of modeling and simulation for the study of complex engineering system of systems. Taking complex product manufacturing as an example, the evolution process from systems engineering to model-based systems engineering (MBSE) and then to modeling and simulation-based system of systems engineering is analyzed. The characteristics and challenges of modeling and simulation of complex engineering system of systems is discussed. Some research topics in filed of MSBS2E is introduced, which …
Hybrid Variable Neighborhood Search Algorithm For The Multi-Trip And Heterogeneous-Fleet Electric Vehicle Routing Problem,
2022
1.School of International Trade and Economics, University of International Business and Economics, Beijing 100029, China;3.Department of Information Management, University of International Business and Economics, Beijing 100029, China;
Hybrid Variable Neighborhood Search Algorithm For The Multi-Trip And Heterogeneous-Fleet Electric Vehicle Routing Problem, Weiquan Wang, Ding Ding, Shuyan Cao
Journal of System Simulation
Abstract: Based on the real business practice, the multi-trip and heterogeneous-fleet electric vehicle routing problem (MTHF-EVRP) with time windows in green logistics is studied. A path-based mixed-integer linear model is built for the precise solution to the small-scale instances. A hybrid variable neighborhood search algorithm (Hybrid VNS) combined the variable neighborhood search algorithm with the labeling algorithm is proposed for the large-scale instances. The algorithm generates a modified insertion heuristic with random factor to construct the initial solution, allows the time window and range violation, adopts the neighborhood operators for the local search, and applies a labeling algorithm to solve …
Design And Implementation Of A Hybrid Solver On Cpu And Gpu Multi-Target Machines,
2022
College of Computer Science and Technology, Jilin University, Changchun 130012, China;
Design And Implementation Of A Hybrid Solver On Cpu And Gpu Multi-Target Machines, Lin Ma, Xuesong Zhang, Xinlin Lei, Tie Bao
Journal of System Simulation
Abstract: The traditional parallel solving methods for the ordinary differential equations mainly include the task-oriented parallelism and the method-oriented parallelism. However, these two solving algorithms have serious shortcomings, which can only use CPU resource or just design for the homogeneous form of ODE(ordinary differential equations) clusters. By using RIDC(revisionist integral deferred correction) algorithm, a hybrid solver based on CPU and GPU multi-target machine is designed, which solves the differential equation system based on the pipeline form. Meanwhile, the parallel calculation within a single equation group and between the different equation groups is realized, which can give full play to the …
Design And Development Of A Simulation System For Scheduling In Cloud Manufacturing Based On Microservice Architecture,
2022
1.School of Mechano-Electronic Engineering, Xidian University, Xi'an 710071, China;
Design And Development Of A Simulation System For Scheduling In Cloud Manufacturing Based On Microservice Architecture, Yongkui Liu, Ming Zeng, Lin Zhang, Jinwei Guo, Siyang Yuan, Yaoyao Ping
Journal of System Simulation
Abstract: In view of the lack of the low coupling and highly extensible cloud manufacturing scheduling simulation system, that leads to inconvenience of the performance test on scheduling algorithms, a scalable cloud manufacturing scheduling model with the scheduling goal of the minimization of cost and completion time and the maximization of quality of service is proposed. A micro-service architecture based cloud manufacturing scheduling simulation system is designed and developed, which realizes the functions of system management, resource management, task management and simulation management, and has the characteristics of flexible autonomy, stability and scalability. The simulation system facilitates the …
Image Reconstruction Of Electrical Capacitance Tomography Based On Convolutional Neural Network And Finite Element Simulation,
2022
Department of Automation, North China Electric Power University, Baoding 071003, China;
Image Reconstruction Of Electrical Capacitance Tomography Based On Convolutional Neural Network And Finite Element Simulation, Lifeng Zhang, Huiren Wang
Journal of System Simulation
Abstract: To address the issues related to the mixed hybrid telemetry, track and command(TT&C) resource, including multiple attributes, large differences in preferences and scheduling conflicts when resources are limited in joint scheduling, on the basis of the description method in the single system TT&C network scheduling research, the characteristics of the hybrid TT&C task requirements are analyzed and the standardized description of the hybrid TT&C resource scheduling task requirements is provided. With the goal of maximizing the return value of TT&C scheduling, a hybrid resource joint scheduling model is established. A solution strategy based on an improved genetic …
Indoor Positioning Algorithm Based On Xgboost Prediction And Elastic Net Error Compensation,
2022
College of Communication and Information Engineering, Xi'an University of Science and Technology, Xi'an 710054, China;
Indoor Positioning Algorithm Based On Xgboost Prediction And Elastic Net Error Compensation, Xiaofei Kang, Xuan Zeng, Wei Qiao
Journal of System Simulation
Abstract: Aiming at the multi-depot half-open vehicle routing problem and consideringthe soft time window constraints and vehicle speed changes, an optimization model with the goal of maximizing average customer satisfaction, shortest distribution distance and minimum distribution cost is established and a two-stage solution algorithm is designed. The self-adaptive grid density method and neighborhood crowding density method are used to maintain the external archives and to select the global optimal particles, and the convergence of the multi-objective particle swarm optimization (MOPSO) and the diversity of the later population can be improved to obtain the initial feasible solution. The initial feasible …
Feature Matching Algorithm Based On Optimal Geometric Constraints And Ransac,
2022
1.Institute of Computer Science and Engineering, Xi'an University of Technology, Xi'an 710048, China;2.Shaanxi Key Laboratory for Network Computing and Security Technology, Xi'an 710048, China;
Feature Matching Algorithm Based On Optimal Geometric Constraints And Ransac, Xiaojuan Ning, Jieru Li, Fan Gao, Yinghui Wang
Journal of System Simulation
Abstract: In order to solve the problem that it's hard to reconcile the quality and computational efficiency of feature point matching. The initial matching for the extracted feature points is implemented through k-nearest neighbor (KNN) algorithm. According to the characteristics of equal length and same slope of the connecting line between matching points, the optimal geometric constraint is constructed based on the statistical sorting strategy to eliminate the obvious matching errors. Then random sample consensus (RANSAC) algorithm is utilized for further filtering to ensure the accuracy of the feature matching point pairs. Experimental results show that the method can obtain …
Motion Simulation And Performance Analysis Of 2d Variable Stiffness Snake-Like Robot,
2022
1.School of Instrument Science and Engineering, Southeast University, Nanjing 210096, China;
Motion Simulation And Performance Analysis Of 2d Variable Stiffness Snake-Like Robot, Yanqin Long, Guifang Qiao, Guangming Song, Ying Zhang, Linlin Cheng
Journal of System Simulation
Abstract: Mutual interference of vehicular laser radar causes serious performance reduction of target detection and tracking. From spatial, time and modulation frequency, various possible interference of lidars of pulse and frequency modulated continuous wave method in road environments are studied by simulation. The possibility of the interference is calculated, the features and performance reduction of the interference are analyzed. For the possible interference, using a method of pseudo random noise code to modulate the output amplitude of the continuous wave laser can effectively reduce the probability of interference and ensure the reliable operation of lidar in road environments.
Optimization Of Dynamic Post-Disaster Emergency Distribution Network Under Perspective Of Rescue Efficiency,
2022
University of Shanghai for Science and Technology, Shanghai 200082, China;
Optimization Of Dynamic Post-Disaster Emergency Distribution Network Under Perspective Of Rescue Efficiency, Xinyu Gao, Jing Ni
Journal of System Simulation
Abstract: Aiming at the emergency rescue, a dynamic directed rescue network is established with the dynamic changes of the location, demand, and affected population of disaster site, and a mathematical model is constructed with the maximum rescue efficiency. A data envelope analysis model is applied to evaluate the efficiency of each rescue route segment. An efficiency-based dynamic routing model is established to transform the dynamic routes into the multi-stage static routes through the time slice division. An improved hybrid greedy-ant colony optimization algorithm is designed to solve the model, and the proposed algorithm is compared with the genetic algorithm, particle …
Idea Of Infinitesimal Method-Introduced Hybrid Tt&C Resources Joint Scheduling,
2022
1.Graduate School, Space Engineering University, Beijing 101416, China;
Idea Of Infinitesimal Method-Introduced Hybrid Tt&C Resources Joint Scheduling, Naiyang Xue, Dan Ding, Hongmin Wang, Yile Fan, Zhongqian Liu
Journal of System Simulation
Abstract: Aiming at the study on the motion performance of a two-dimensional variable stiffness snake-robot, a Simulink/Adams co-simulation model is established, and the effects of the damping coefficient, the stiffness parameters and the angular frequency of the variable stiffness actuator on the motion energy consumption are analyzed. To realize the synchronous control of joint trajectory and stiffness, a motion controller based on two-layer CPG is proposed. The results show that the damping coefficient can effectively reduce the proportion of starting energy consumption of the variable stiffness snake-like robot, and the ratio of starting energy consumption increases with the stiffness parameter …
Research On Multi-Depot Half-Open Vehicle Routing Problem With Time-Varying Speed,
2022
School of Information and Control Engineering, Xi'an University of Architecture and Technology, Xi'an 710399, China;
Research On Multi-Depot Half-Open Vehicle Routing Problem With Time-Varying Speed, Kaiqing Zhang, Qichun Ji
Journal of System Simulation
Abstract: Based on the analysis of operation concept and its elements, this paper proposes a framework of operation effectiveness simulation evaluation under the guidance of operation concept. Based on this framework, the basic idea of operation effectiveness simulation evaluation index construction under the guidance of operation concept is put forward. The specific methods of operation task modeling based on description, operation activity modeling based on decomposition, and operation effectiveness index selection based on effect are studied. The operation effectiveness simulation evaluation index system is constructed by taking the ground assault unit mountain key point capture and attack operation task guided …
Continuous Simulation Technology For Multi-State Evolution Of Urban Road Traffic,
2022
School of Traffic and Transportation, Chongqing Jiaotong University, Chongqing 400074, China;
Continuous Simulation Technology For Multi-State Evolution Of Urban Road Traffic, Qinglu Ma, Lin Zhang, Xinxin Yuan, Fengjie Liu
Journal of System Simulation
Abstract: Arming at the decreased positioning accuracy caused by the environment dynamic change of indoor positioning system, an error compensation algorithm based on XGBoost fusion elastic net is proposed. XGBoost positioning model is used to make a preliminary prediction on the target position. When the indoor environment changes, the elastic net algorithm is used to construct an error compensation model to correct the positioning error of XGBoost positioning model. The experimental results show that when only 15% of the fingerprint database samples need to be updated, the positioning accuracy of the proposed algorithm is controlled in 0.73m at the 80% …
Simulation On Critical Conditions Of Delay Diffusion In Scale-Free Logistics Network,
2022
Shanghai University of Engineering Science, Shanghai 201620, China;
Simulation On Critical Conditions Of Delay Diffusion In Scale-Free Logistics Network, Hongguang Yao, Huihui Xiao, Hang Zhang
Journal of System Simulation
Abstract: Aiming at the critical condition of delay diffusion in scale-free logistics network, a susceptible-infected-susceptible(SIS) model based on the density of delay nodes is established by mean field theory, and the critical value is solved. By designing the delay diffusion simulation system in logistics network, a virtual network with scale-free attribute is generated, and the critical condition is verified by simulation. The results show that there are a few key nodes with high value in scale-free logistics network. Once these nodes have service obstades, compared with other nodes, it will lead to a larger range of delay and faster …
A Deep Reinforcement Learning Approach With Prioritized Experience Replay And Importance Factor For Makespan Minimization In Manufacturing,
2022
Louisiana State University and Agricultural and Mechanical College
A Deep Reinforcement Learning Approach With Prioritized Experience Replay And Importance Factor For Makespan Minimization In Manufacturing, Jose Napoleon Martinez
LSU Doctoral Dissertations
In this research, we investigated the application of deep reinforcement learning (DRL) to a common manufacturing scheduling optimization problem, max makespan minimization. In this application, tasks are scheduled to undergo processing in identical processing units (for instance, identical machines, machining centers, or cells). The optimization goal is to assign the jobs to be scheduled to units to minimize the maximum processing time (i.e., makespan) on any unit.
Machine learning methods have the potential to "learn" structures in the distribution of job times that could lead to improved optimization performance and time over traditional optimization methods, as well as to adapt …
An Elliptical Cover Problem In Drone Delivery Network Design And Its Solution Algorithms,
2022
Wayne State University
An Elliptical Cover Problem In Drone Delivery Network Design And Its Solution Algorithms, Yanchao Liu
Industrial and Systems Engineering Faculty Research Publications
Given n demand points in a geographic area, the elliptical cover problem is to determine the location of p depots (anywhere in the area) so as to minimize the maximum distance of an economical delivery trip in which a delivery vehicle starts from the nearest depot to a demand point, visits the demand point and then returns to the second nearest depot to that demand point. We show that this problem is NP-hard, and adapt Cooper’s alternating locate-allocate heuristic to find locally optimal solutions for both the point-coverage and area-coverage scenarios. Experiments show that most locally optimal solutions perform similarly …
Advancements Of Autonomous Applications,
2022
Southwestern Oklahoma State University
Advancements Of Autonomous Applications, Jessica Massey, Jeremy Evert
Student Research
This material is based upon work supported by the National Aeronautics and Space Administration under Grant Agreement No. 80NSSC20M0114 issued through Oklahoma Space Grant Consortium. This research is in support of the Fire Dawgs competition team for this year’s SpeedFest competition at Oklahoma State University. This NASA OK Space Grant Consortium funded competition team will compete in the Charlie Class, where an autonomous vehicle will navigate a course and put out a fire.
Robots and self-driving vehicles are useful, especially for hazardous jobs, such as firefighting. The use of high-tech sensing technology is a small part of how self-driving vehicles …
