Transportation Engineering Commons^™

Transforming Dredged Sediment Into Reactive Clay: Critical Review Of Calcination, Reactivity, And Sustainable Valorization As Supplementary Cementitious Material, Seongho Han, Sanghwon Wi, Koochul Ji, Keun Hyeok Yang, Farshad Rajabipour, Kamal H. Khayat, Jinyoung Yoon

Civil, Architectural and Environmental Engineering Faculty Research & Creative Works

Dredged sediment (DS) is generated worldwide in large volumes through routine port and waterway maintenance, yet its disposal presents environmental and economic challenges. Recently, calcined dredged sediment (CDS) has emerged as a supplementary cementitious material (SCM), offering a viable alternative to traditional SCMs, such as fly ash and slag cement. This review synthesizes current knowledge on the physical, chemical, and mineralogical characteristics of raw DS and pretreatment strategies aimed at dewatering, organic matter removal, and contaminant stabilization. The effects of calcination on the production of reactive amorphous aluminosilicates are also discussed. Emphasis is placed on physicochemical changes revealed by experimental …

Low-Carbon Concrete For Sustainable Construction: A Comprehensive Review Of Performance Characteristics, Implementation Challenges, And Decarbonization Pathways, Fazel Azarhomayun, Jingjie Wei, Kamal H. Khayat

Civil, Architectural and Environmental Engineering Faculty Research & Creative Works

Reducing the carbon footprint of concrete has become a central objective in sustainable construction. Low-carbon concrete (LCC), developed primarily through clinker reduction, supplementary cementitious materials, and alternative binder strategies, offers a promising route for lowering embodied emissions while maintaining the performance requirements of structural concrete. This comprehensive review consolidates the current state of knowledge on LCC, identifies critical research and implementation gaps, and examines its material composition, mixture-design methodologies, performance characteristics, structural applications, implementation challenges, and decarbonization pathways. Single-SCM systems have been reported at clinker-replacement levels approaching 50%, although durability at these replacement levels, particularly carbonation resistance, remains system- and …

Research And Assessment Of Needs For Sign And Signal Maintenance, Megan White, Eric Green

Kentucky Transportation Center Research Report

Kentucky Transportation Cabinet (KYTC) sign and signal crews have expressed multiple concerns related to compensation, expertise, and having the financial and personnel resources needed to help the agency comply with Manual on Uniform Traffic Control Devices (MUTCD) guidelines while continuing to perform routine job duties. Internal reorganizations and personnel changes have reduced staffing and budgets available to underwrite the activities of sign and signal crews even as workloads have remained steady or increased. To document the challenges facing sign and signal crews and associated engineering staff, Kentucky Transportation Center (KTC) researchers administered a statewide survey. Respondents gave their perspectives on …

Building And Facility Asset Inventory Assessment And Maintenance, Catherine Keathley, Bethany Paris, Jon Wilcoxson

Kentucky Transportation Center Research Report

The Kentucky Transportation Cabinet (KYTC) manages approximately 1,500 buildings statewide, including facilities such as office buildings, maintenance and equipment garages, and storage sheds. Because managing buildings and properties requires considerable effort, agency decision makers need reliable monitoring and management tools that generate and organize data which can be used to determine the best course of action for facility maintenance and replacement. In addition to assessing the Cabinet’s building inventory, this report advances recommendations to improve the collection, management, and reporting of facility-related data. Assessment of the inventory managed by KYTC included geolocation of all properties and the buildings therein. Once …

Kytc Crash Modification Factor Recommendation List Online Tool, William Staats, Reginald Souleyrette, Teng Alex Wang, Mohammad Zana Majidi

Kentucky Transportation Center Research Report

Transportation practitioners use crash modification factors/functions (CMFs) to calculate the number of crashes expected once a countermeasure has been implemented. When evaluating design alternatives, CMFs can be used in conjunction with safety performance functions (SPFs) to derive crash predictions. The Federal Highway Administration (FHWA) maintains the CMF Clearinghouse as a repository for CMFs. Contributions are submitted by researchers across the U.S., Canada, and throughout the world. Typically, individual countermeasures are associated with multiple CMFs. Some CMFs only apply to a specific facility or crash types. CMF quality varies, and some only apply to a specific facility and/or crash types, regions, …

Development Of Kytc’S Context Classification Network, Jill Asher, Megan White, Eric Green, Christopher Van Dyke

Kentucky Transportation Center Research Report

Transportation agencies have adopted context-based classification systems that classify roadways based on the surrounding environment and user types. This offers a more comprehensive and multimodal perspective than traditional functional classification. While the Kentucky Transportation Cabinet (KYTC) has begun using project-level context classification, the agency will benefit from introducing network-level context classification. This will improve guidance, enhance project prioritization, and support the development of projects that better address the needs of all users. Responding to this need, Kentucky Transportation Center (KTC) researchers, in conjunction with KYTC staff, created a GIS-based model to build a context classification network that covers all state-maintained …

Recent Advances In The Rheological Properties Of Ultra-High-Performance Concrete: A Critical Review, Le Teng, Kamal H. Khayat, Jiaping Liu

Civil, Architectural and Environmental Engineering Faculty Research & Creative Works

Ultra-high-performance concrete (UHPC) with adapted rheology continues to attract interest considering the requirement for novel processing techniques such as self-consolidating, pumping, spraying, and three-dimensional (3D) printing. The rheology of UHPC is complex due to its high solid volume fraction, low water content, and wide range of constituent materials that affect its flow properties. This work provides guidance for tailoring the mixture proportioning of UHPC to secure proper rheological properties and performance of UHPC for various applications. In the first part of this work, key physical, physicochemical, and chemical factors that can affect the rheological properties of UHPC are discussed. Rheological …

Significant Crash Characteristics Associated With E-Scooter And E-Bike Crashes, Aimee Jefferson

Dissertations

Micromobility devices—namely e-scooters and e-bikes—have rapidly gained popularity in the United Sates, rising from 35 million annual shared rides in 2017 to over 133 million in 2023 (NACTO 2024). But also increasing is the number of injuries associated with these devices; however, most research emphasizes injury and demographic patterns rather than crash characteristics that would inform prevention strategies. Most existing crash research also relies on small sample sizes, lacks nuance distinguishing between involved parties (motorists, pedestrians, single device), and fails to distinguish between bicycle and micromobility crash patterns despite micromobility devices often being instructed to use conventional bicycle facilities. These …

An Analytical Framework For Quantifying Urban And Community Resilience To Natural Hazards From Cell-Phone Gps-Location And Traffic-Flow Data, Georgios Chatzikyriakidis

Civil and Environmental Engineering Theses and Dissertations

Urban areas are increasingly exposed to natural hazards while accommodating a growing share of the global population, yet a consistent science-based framework for quantifying urban and community resilience remains lacking. This dissertation develops a physics-based analytical framework grounded in statistical mechanics and the quantitative theory of Brownian motion. A city is conceptualized as a complex medium in which citizens move analogously to Brownian particles within a viscoelastic environment, influenced by socioeconomic interactions and infrastructure functionality.

A central premise is that urban resilience, interpreted as engineering resilience (an outcome), can be quantified through a single metric: the mean-square displacement MSD=⟨r²(t)⟩, of …

Quantitative Assessment Of Cybersecurity Risk Variability Across Transportation Modes, Paulo Carreon

Doctoral Dissertations and Master's Theses

Transportation systems are increasingly dependent on digital technologies, networked communications, and cyber-physical integration, making cybersecurity an important issue for operational continuity, resilience, and safety. Although cybersecurity risks in transportation are widely recognized, much of the existing research remains mode-specific and lacks a standardized quantitative framework for comparing risk across transportation systems. This study develops a quantitative, incident-based approach for assessing cybersecurity risk variability across four major transportation modes: Aviation, Maritime, Rail, and Road. The study is based on a manually constructed dataset of 189 publicly reported transportation cybersecurity incidents collected from 2000 to 2025. Each incident was coded into structured …

Calibration Refinement Of Aashto Paveme For Kentucky Asphalt Overlays, Clayton S. Cook, Kean H. Ashurst Jr., Clark Graves

Kentucky Transportation Center Research Report

The Kentucky Transportation Cabinet (KYTC) uses AASHTOWare’s Pavement ME Design Version 3.0 (PaveME) to develop mechanistic-empirical designs for new and reconstructed pavements. Transfer functions used for estimating pavement distress in PaveME rely on national calibration values derived from the Long-Term Pavement Performance (LTPP) database. However, these often fail to reflect Kentucky’s local conditions, materials, and practices. To address this issue, Kentucky Transportation Center (KTC) researchers completed local calibrations for several key transfer functions (rutting, reflective fatigue cracking, and roughness (IRI)) to improve the predictive accuracy of and reduce bias in pavement performance models developed for rehabilitation projects that involve placing …

Behavior Of A Mildly Skewed Network Tied-Arch Bridge During Construction And Early Service Life, Harsha Amunugama

Dissertations

This dissertation work investigated the structural performance of the 2nd Avenue Bridge in Detroit, Michigan, the first skewed, unbraced network tied-arch bridge in the U.S. The 245-ft long, 96.5-ft wide bridge features an 18-degree skew. The bridge was constructed using accelerated bridge construction (ABC) techniques, including off-site fabrication at a bridge staging area (BSA) and installation via self-propelled modular transporters (SPMTs) and lateral launching, enabling the completion of construction with minimal disruptions to I-94 traffic and improved safety.

Given the unique structural configuration of the bridge, the use of innovative construction techniques, and differences observed in structural responses predicted by …

Computer Vision And Machine Learning Approaches For Defect Detection In 3d-Printed Cementitious Materials: A Systematic Review, Muhammad Ali Musarat, Ruben Paul Borg, Jingjie Wei, Carl James Debono, Kamal Khayat

Civil, Architectural and Environmental Engineering Faculty Research & Creative Works

3D printing is evolving at a fast pace in both the manufacturing and construction sectors. These advancements can greatly benefit these industries. However, the 3D printing of concrete structures presents some challenges due to defects in the 3D concrete printed elements. Hence, this study systematically reviews Artificial Intelligence (AI)-driven techniques, such as Computer Vision and Machine Learning, to identify surface defects that can occur in 3D-printed cementitious material structures. The adopted methodology was the PRISMA statement with the aim of reporting the systematic review and meta-analysis. Two well-known databases, Web of Science and Scopus, were utilised for data extraction of …

Factors Affecting Pedestrian-Vehicle Conflicts: An Empirical Analysis, Christo D. Jamo

Honors Scholar Theses

The number of pedestrian deaths increased by 78% between 2009 and 2023, while other motor vehicle crash deaths increased by 13% in the same period [1]. To identify potential pedestrian safety measures, this study analyzed the effects of location-based demographics, pedestrian phasing type, and other physical infrastructure and behavior variables on the probability of pedestrian-vehicle conflicts at signalized intersections, which is a surrogate measure of crash risk. Data were collected from 55 intersections in Connecticut, and the pedestrian-vehicle interactions were classified by severity based on the Swedish Traffic Conflict Technique: undisturbed passage, potential conflict, minor conflict, or serious conflict. Because …

Robust Hardware Trojan Detection Leveraging Dual‑Domain Features And Stacked Ensemble Learning, Sefatun-Noor Puspa

All Theses

In Cyber-physical systems rely on sensors, communication, and computing, all powered by integrated circuits (ICs). These ICs are vulnerable to malicious hardware attacks, with hardware Trojans being one of the stealthiest threats. Trojans are malicious implants in the circuitry, which are often inserted during design or fabrication stages. This stealthy addition remains dormant until triggered and might cause functional disruptions or sensitive information leakage once triggered. Traditional IC validation methods, such as functional testing and logic analysis, usually fail to capture these subtle anomalies because hardware Trojans are intentionally designed to mimic normal circuit behavior. They often remain dormant under …

Robustness Of Vision Language Models For Pedestrian Detection Tasks, Ostonya K. Thomas

All Theses

Autonomous vehicle (AV) systems typically employ modular systems in which discrete components handle separate tasks such as perception, computation, and path planning. While flexible, this approach allows errors to propagate and compound across the pipeline, and many AI systems offer little transparency into their internal decision-making. Such limitations are particularly concerning in safety-critical domains where failures can carry lethal consequences. Vision Language Models (VLMs) have emerged as a promising alternative because they support end-to-end implementations that bypass compounding error risks and provide natural language explanations of their outputs. Despite these advantages, prior research has demonstrated that both computer vision systems …

Spatial And Temporal Patterns Of Bike-Share Use In A Small City: A Case Study Of Fort Smith, Arkansas, Brianna L. Buenger

Civil Engineering Undergraduate Honors Theses

Many small and mid-sized cities in the United States face ongoing transportation challenges due to limited public transit options. This can prevent residents from being able to reach essential destinations. While bikeshare systems have been widely studied in large metropolitan areas, there is limited understanding of how usage patterns vary across space, time, and trip characteristics in small-city contexts. This study addresses this gap by examining spatial and temporal patterns of bikeshare use in a small U.S. city through a case study of the Fort Smith, Arkansas, SMILIES bikeshare program. Using approximately 10,000 trips over three years, the analysis examines …

Critical Arteries: Prioritizing Economic Vitality And Emergency Access In Local Networks, Jeremy Hunter

Local Transportation Asset Management Conference

Standard Asset Management Plans (AMPs) often rely heavily on Pavement Condition Index, Paser ratings, and Bridge Condition Ratings to dictate repair schedules. However, a strictly condition-based approach may neglect the economic and safety criticality of specific routes. This presentation proposes a multi-variable evaluation framework for counties, cities, and towns. I will explore methods for overlaying industrial data—specifically for heavy-haul sectors like logging, masonry, and agriculture—to identify and fortify the "economic lifelines" that sustain local revenue. Furthermore, I will address the necessity of resiliency planning within the AMP. By integrating hydraulic data and flood-prone area mapping, agencies can ensure that routes …

Data Analysis For A Regional Department Of Transportation, Maxwell Cook, Kendall Klewer, Jocelyn Wood

2026 Student Academic Showcase

The given client is the regional office of a state department of a transportation agency that oversees five counties within the state. The regional office has provided information pertaining to areas such as financials, car accidents, and contractors which will be used to explore a variety of data trends and insights. The goal of the data exploration is to determine if there are other ways in which money can be reallocated to create an optimized spending plan for future projects. Actual award cost versus estimated award cost, contractor versus timeliness of projects, and type of job versus employers in a …

Assessing Passenger Electric Vehicle Growth Strategies And Their Impacts On Electricity Demand Load And Co2 Emissions In Aceh Province To Achieve Net Zero Emission Target By 2060, Taufik Hidayat, Widodo Wahyu Purwanto

Journal of Materials Exploration and Findings

The electrification of the transport sector is a crucial pathway for achieving Indonesia’s Net Zero Emissions (NZE) target by 2060. This study assesses the potential impact of passenger electric vehicle (EV) penetration on electricity demand and CO2 emissions in Aceh Province through a scenario-based modelling approach. Two policy-aligned scenarios are assessed: a low-penetration (LP) scenario and a high-penetration (HP) scenario. Using the Gompertz model and the ASIF framework, total CO2 emissions were projected from 2020 to 2060. Results show that although higher EV penetration reduces direct emissions from internal combustion engine (ICE) vehicles, total CO2 emissions increase more significantly under …