Transportation Engineering Commons^™

Performance And Cost-Effectiveness Of Chip Seal And Microsurfacing In Flexible Pavements, Mohammad Zobair Ibne Bashar

LSU Master's Theses

Chip seal and microsurfacing are pavement maintenance activities typically used in relatively low traffic roads with the aim to reduce the rate of deterioration and to defer the need for costly rehabilitation activities. Chip seal is widely used in Louisiana, and Louisiana’s $6.3 million microsurfacing program is amongst the largest microsurfacing programs in the United States. As these surface treatments seal the road surface, the effectiveness of this treatment in such a setting has been a concern in recent years by linking it to moisture damage caused by the trapped moisture underneath the pavement. Furthermore, the cost-effectiveness and optimal timing …

Effects Of Moving Bottlenecks On Traffic Operations On Four-Lane Level Freeway Segments, Jianan Zhou

Department of Civil and Environmental Engineering: Dissertations, Theses, and Student Research

The Highway Capacity Manual (HCM) was developed to provide capacity and level of service analyses for roadway facilities. Trucks may adversely affect the quality of traffic flow on a roadway. In HCM, the passenger car equivalent (PCE) of a truck, which represents the number of passenger cars that have an equivalent effect on traffic flow, is used to account for the impacts of trucks. However, in the past ten years rural freeways in the western rural U.S. have experienced conditions that lie outside the standard HCM conditions. Also, the current HCM truck PCEs may not be appropriate for the western …

Ship’S Autopilot Design For Automatic Collision Avoidance Based On Adaptive Neural Networks, Jun Ning

World Maritime University Dissertations

No abstract provided.

Modeling Socio-Economic Determinants Of Traffic Fatalities, Amin Azimian, Deogratias Eustace

Civil and Environmental Engineering and Engineering Mechanics Faculty Publications

Over several decades, traffic growth has caused an increased number of traffic crashes, which are associated with economic losses and human sufferings. According to the National Highway Traffic Safety Administration [1] in 2016 there were a total of 34,247 fatal traffic crashes in the United States that resulted into 37,133 fatalities. Risk factors relating to the occurrence of fatal and injury severity of motor vehicle crashes have been extensively studied. Most studies [2-7] that have attempted to model the occurrences of traffic crashes and fatalities have been mainly confined to factors related to driver characteristics, roadway geometry characteristics, traffic characteristics, …

Self-Healing Microcapsules As Concrete Aggregates For Corrosion Inhibition In Reinforced Concrete, Homero Castaneda, Marwa Hassan, Miladin Radovic, Jose Milla

Publications

Reinforced Concrete (RC) structures are vital to the US’s civil infrastructure for their strength and versatility. Unfortunately, RC elements deteriorate rapidly when exposed to corrosive environments. One possible solution is to extend the life of RC elements and systems using microencapsulated corrosion inhibitors to reduce the rebar corrosion rate. The capsules house an anodic corrosion inhibitor agent including calcium nitrate (CN) and triethanolamine (TEA). The integration of such microencapsulated materials will enhance the durability and extend the useful life by controlling the corrosion precursors and the corrosion process during damage evolution. Therefore, this work aims to develop and characterize the …

Development, Training, Education, And Implementation Of Low-Cost Sensing Technologies For Bridge Structural Health Monitoring (Shm), Fernando Moreu, Chris Lippitt, Dilendra Maharjan, Marlon Aguero, Roya Nasimi

Publications

Transportation infrastructure needs continuous monitoring. However, traditional inspections cost money and are conducted visually. New technologies for bridge monitoring are expensive and complex. This project involved developing cost-effective sensor technologies that can be applied towards the maintenance of railroad bridges by recording reference-free transverse displacement. More specifically, this project developed new applications of new technologies (Arduino, wireless smart sensors, drones, Hololens) and promoted workforce development with an emphasis on outreach of high-school students. This project was carried out in three main phases: (1) development and validation of technologies, (2) education and outreach to students, and (3) outreach to industry consisting …

Sustainability-Based Long-Term Management Of Bridges Under Multi-Hazard Exposure, Mohamed Soliman

Publications

Bridges are under deterioration due to various mechanical and environmental stressors. Hydraulic-related hazards (e.g., flood and scour), aggressive environmental conditions, and seismic events (e.g., earthquake) are recognized as the most significant threats to the safety of bridges. In traditional risk assessment methods for structures susceptible to damage due to floods and other natural hazards (e.g., corrosion and seismic events), future hazard predictions are conducted using historic return periods and climate records. However, recent increase in flood intensity in central-southern states indicate that future hazard occurrence rate may not necessarily follow past trends. Accordingly, current design, assessment, and management methodologies should …

Statistical Investigation Of Road And Railway Hazardous Materials Transportation Safety, Amirfarrokh Iranitalab

Department of Civil and Environmental Engineering: Dissertations, Theses, and Student Research

Transportation of hazardous materials (hazmat) in the United States (U.S.) constituted 22.8% of the total tonnage transported in 2012 with an estimated value of more than 2.3 billion dollars. As such, hazmat transportation is a significant economic activity in the U.S. However, hazmat transportation exposes people and environment to the infrequent but potentially severe consequences of incidents resulting in hazmat release. Trucks and trains carried 63.7% of the hazmat in the U.S. in 2012 and are the major foci of this dissertation. The main research objectives were 1) identification and quantification of the effects of different factors on occurrence and …

Driver Comprehension Of Permissive Right-Turns With A Flashing Yellow Arrow (Fya), Christopher Monsere, David Hurwitz

PSU Transportation Seminars

This research explored driver comprehension and behaviors with respect to right-turn signal displays with a focus on the Flashing Yellow Arrow (FYA) in a driving simulator and a comprehension survey. Flashing yellow arrows are used in place of other turn signals, such as solid green or flashing yellow or red circles, to indicate that drivers may turn after yielding to oncoming traffic. These turns are considered “permissive.” Turns where no conflicting traffic is present, such as those indicated with a green arrow, are “protected” turns. The flashing yellow arrow’s inclusion in the 2009 Manual on Uniform Traffic Control Devices sped …

17-01 An Intersection Database Enhances Blind Pedestrians' Access To Complex Signalized Intersections: Stage 2 Analysis & Database Development, Dave Guth, Janet Barlow, Paul Ponchillia, Lee Rodegerdts, Dae Shik Kim, Kevin Lee

Transportation Research Center Reports

This project investigated the effects of providing verbal descriptions of intersections and crosswalks on the performance of street-crossing subtasks by individuals who are totally blind. The intersections included crosswalks that varied widely in geometric and operational characteristics, including the presence or absence of accessibility features. In the no-database condition, participants used their typical street-crossing procedures. In the database-condition, participants additionally listened to database-generated descriptions of the intersections and crosswalks before crossing. The database descriptions had significant positive effects on some subtasks (primarily “crossing” subtasks such as deciding when to cross) and not others (primarily “wayfinding” subtasks such as remaining in …

Webinar: Addressing Bicycle-Vehicle Conflicts With Alternate Signal Control Strategies, Sirisha Kothuri

TREC Webinar Series

There is nationwide interest in supporting sustainable and active transportation modes such as bicycling and walking due to the many benefits associated with them, including reduced congestion, lower emissions and improved health. Although the number of bicyclists is increasing, safety remains a top concern. In urban areas, a common crash type involving bicycles at intersections is the “right hook” where a right-turning vehicle collides with a through bicyclist. While geometric treatments and pavement markings have been studied, there is a lack of research on signal timing treatments to address right-hook bicycle-vehicle conflicts.

Addressing Bicycle-Vehicle Conflicts with Alternate Signal Control Strategies …

Machine Learning Tools For Optimization Of Fuel Consumption At Signalized Intersections In Connected/Automated Vehicles Environment, Saleh Ragab Mousa

LSU Doctoral Dissertations

Researchers continue to seek numerous techniques for making the transportation sector more sustainable in terms of fuel consumption and greenhouse gas emissions. Among the most effective techniques is Eco-driving at signalized intersections. Eco-driving is a complex control problem where drivers approaching the intersections are guided, over a period of time, to optimize fuel consumption. Eco-driving control systems reduce fuel consumption by optimizing vehicle trajectories near signalized intersections based on information of the SpaT (Signal Phase and Timing). Developing Eco-driving applications for semi-actuated signals, unlike pre-timed, is more challenging due to variations in cycle length resulting from fluctuations in traffic demand. …

Crash/Near-Crash: Impact Of Secondary Tasks And Real-Time Detection Of Distracted Driving, Peter Ramzy Zaki Bakhit

LSU Doctoral Dissertations

The main goal of this dissertation is to investigate the problem of distracted driving from two different perspectives. First, the identification of possible sources of distraction and their associated crash/near-crash risk. That can assist government officials toward more informed decision-making process, allowing for optimized allocation of available resources to reduce roadway crashes and improve traffic safety. Second, actively counteracting the distracted driving phenomenon by quantitative evaluation of eye glance patterns.

This dissertation research consists of two different parts. The first part provides an in-depth analysis for the increased crash/near-crash risk associated with different secondary task activities using the largest real-world …

Unobserved Heterogeneity And Spatial Correlation: Statistical And Econometric Analyses Of Heavy-Vehicle Hard Braking And Crash Frequency, Jason Anderson

PSU Transportation Seminars

In heavy-vehicles (a truck with a gross vehicle weight rating of greater than 10,000 pounds), a hard braking event is described as an event that prompts the vehicle’s “black box” to record an abrupt change in speed. More specifically, this occurs when the driver applies excess force to the vehicle’s brake. These hard braking events can then serve as a proxy for several factors, such as economic impacts, environmental impacts, and impacts on safety. In the context of the present study, being that approximately one-third of all heavy-vehicle-caused crashes in 2014 were attributed to faulty brakes, there is a need …

Tncs & Congestion, Joe Castiglione, Drew Cooper, Bhargava Sana, Dan Tischler, Tilly Chang, Gregory D. Erhardt, Sneha Roy, Mei Chen, Alex Mucci

Civil Engineering Reports

From the executive summary:

This document:

• Identifies common measures of roadway congestion;
• Discusses factors that contribute to roadway to congestion; and
• Quantifies the relative contributions of different factors, including population, employment, road network changes and TNCs, to observed changes in congestion in San Francisco between 2010 and 2016, by location and time of day.

The report utilizes a unique TNC trip dataset provided to the Transportation Authority by researchers from Northeastern University in late 2016, as well as INRIX data, a commercial dataset which combines several real-time GPS monitoring sources with data from highway performance monitoring systems. These data are …

Modeling The Impact Of Traffic Conditions And Bicycle Facilities On Cyclists' On-Road Stress Levels, Àlvaro Caviedes, Miguel A. Figliozzi

Civil and Environmental Engineering Faculty Publications and Presentations

Past research efforts have shown that cyclists’ safety, stress, and comfort levels greatly affect the routes chosen by cyclists and cycling frequency. Some researchers have tried to categorize cyclists’ levels of traffic stress utilizing data that can be directly measured in the field, such as the number of motorized travel lanes, motorized vehicle travel speeds, and type of bicycle infrastructure. This research effort presents a novel approach: real-world, on-road measurements of physiological stress as cyclists travel across different types of bicycle facilities at peak and off-peak traffic times. By matching videos with stressful events, it was possible to observe the …

Prediction And Rehabilitation Of Highway Embankment Slope Failures In Changing Climate, Navid Jafari, Anand Puppala

Publications

Highway slopes constructed with clayey soil are prone to desiccation cracks due to wetting and drying weather cycle, which allows greater moisture infiltration into the embankment from precipitation. Fissures formed due to extended wetting and drying cycles allow water to seep deeper into the soil than surficial wetting and increase the water content. This increases the moisture content in the soil and results in reduction in shear strength to the fully softened strength. On the other hand, development of desiccation cracks and reduction of the soil matric suction ultimately result in higher hydraulic conductivity value which causes development of higher …

Enhancing The Durability And The Service Life Of Asphalt Pavements Through Innovative Light-Induced Self-Healing Materials, Marwa Hassan

Publications

The objective of this study was to evaluate the efficiency of a new generation of Ultraviolet (UV) light-induced selfhealing polymers in enhancing the durability and self-healing properties of asphalt mixtures. Self-healing polymers were successfully synthesized in the laboratory and were characterized using Fourier Transform Infrared Spectroscopy (FTIR). In addition, Thermogravimetric Analysis (TGA) results showed that the synthesized polymers achieved the required thermal stability to resist asphalt mixture production processes. Viscosity results showed that addition of 5% Recycled Asphalt Shingle (RAS) and/or 20% Reclaimed Asphalt Pavement (RAP) caused an increase in the viscosity of the binder blends. However, a reduction in …

Evaluation Of The Performance And Cost-Effectiveness Of Engineered Cementitious Composites (Ecc) Produced From Region 6 Local Materials, Gabriel Andres Arce Amador, Tyson Rupnow, Marwa Hassan

Publications

The project objective is to develop cost-effective Engineered Cementitious Composites (ECC) with locally available ingredients in Region 6 to address the deficiencies observed in ordinary concrete materials. The study explored the utilization of two types of river sands (coarse and fine), two types of PVA fibers (long and short), four levels of cement replacement with Class F fly ash, and the implementation of recycled crumb rubber in the performance of ECC materials. A total of 24 mix designs were prepared and evaluated in compression, tension, and bending to assess its mechanical properties. Furthermore, the cracking characteristics of the materials produced …

In-Situ Mechanical Characterization For Compacted Aggregates, Douglas Cortes, Paola Bandini

Publications

The evaluation of compacted unbound aggregate layers is perhaps the most common undertaking in transportation-related projects. The assessment of compaction compliance in engineered fills, subgrades, subbases, and bases in roadways and railways is central to ensure longevity of ground transportation infrastructure. In many cases, premature failures in roadways that originate in the unbound aggregate layers can be traced back to inadequate compaction. These failures are preventable, provided the problem areas can be identified by a suitable field test during construction. The most widely used method for compaction assessment during construction is the nuclear density gauge (NDG) test. While the device …