Transportation Engineering Commons^™

Reports From The United States Of North America On Railroads, Steamship Travel, Banks And Other Public Undertakings By Franz Anton Ritter Von Gerstner And Description Of A Journey Through The United States Of North America By Clara Von Gerstner, Née Von Epplen-Härtenstein Translated, With An Introduction, By Steven Rowan, Steven Rowan, Franz Anton Ritter Von Gerstner, Clara Von Gerstner, Née Von Epplen-Härtenstein

History Faculty Works

What follows contains a translation of the Berichte aus den Vereinigten Staaten von Nordamerika… [= Reports from the United States of North America] by Franz Anton Ritter von Gerstner, published in Leipzig in August 1839, and posted on the website of “austrian literature online.” It is the companion piece to two other classics of contemporary travel literature, one of them Ritter von Gerstner’s massive description of the transportation system of the United States published by F. A. von Gerstner’s assistant, Ludwig Klein,1 as well as the touching detailed travel narrative of his widow, Clara von Gerstner, Beschreibung einer Reise durch …

Redefining Construction “As-Built” Plans To Meet Current Kentucky Transportation Cabinet Needs, Victoria Lynn Lasley

Theses and Dissertations--Civil Engineering

As-built drawings are the traditional method used by the construction industry to record changes made during construction. As-builts provide valuable information for new design projects as well as rehabilitation and remediation projects. The completeness and accuracy of these plans are essential for transportation industries and their success. While the importance of as-builts is widely recognized, the process of creating them has proven to be difficult. It is a time consuming process and entities often lack the resources necessary to complete accurate and detailed as-builts. After an investigation of current as-built operations within State Transportation Agencies, recommendations have been made to …

An Assessment Of Historical Traffic Forecast Accuracy And Sources Of Forecast Error, Jawad Mahmud Hoque

Theses and Dissertations--Civil Engineering

Transportation infrastructure improvement projects are typically huge and have significant economic and environmental effects. Forecasts of demand of the facility in the form of traffic level help size the project as well as choose between several alternatives. Inaccuracy in these forecasts can thus have a great impact on the efficiency of the operational design and the benefits accrued from the project against the cost. Despite this understanding, evaluation of traffic forecast inaccuracy has been too few, especially for un-tolled roads in the United States. This study, part of a National Cooperative Highway Research Program (NCHRP) funded project, bridges this gap …

Connected And Autonomous Vehicles Effects On Emergency Response Times, Austin William Obenauf

Theses and Dissertations--Civil Engineering

Emergency response times have been shown to be directly correlated with mortality rates of out-of-hospital patients. Studies have been conducted to show the relationship between time and mortality rates until patients receive the proper treatment. With more cardiac arrests and other life threatening illnesses occurring in the United States, more emergency calls will be required as well. As of today, technological advancements have been made to reduce response times, but human factors still require certain procedures, causing delays in the run time and increasing the rate of mortality. Here we show the results of emergency response times with the market …

Adapting Crash Modification Factors For The Connected And Autonomous Vehicle Environment, Federico Valentin Lause Iii

Theses and Dissertations--Civil Engineering

The Crash Modification Factor (CMF) clearinghouse can be used to estimate benefits for specific highway safety countermeasures. It assists safety professionals in the allocation of investments. The clearinghouse contains over 7000 entries of which only 446 are categorized as intelligent transportation systems or advanced technology, but none directly address connected or autonomous vehicles (CAVs). Further, the effectiveness of highway safety countermeasures is assumed to remain constant over time, an assumption that is particularly problematic as new technologies are introduced. For example, for the existing fleet of human-driven vehicles, installation of rumble strip can potentially reduce “run-off-road” crashes by 40%. If …

Improving Bicycle Infrastructure With The Use Of Bicycle Share Travel Data, Jennifer Mintao Weast

Theses and Dissertations--Civil Engineering

Bicycling as a mode of transportation has been increasing in recent years due to its environmental and health benefits. The availability of bicycles through bicycle share programs has made bicycling a more viable option. With this increase, there is a need for complementary improvements of bicycle infrastructure. Many local and regional transportation agencies are recognizing this need and developing a master plan or safety action plan to improve the city’s bicycle and walking facilities. This study examines bicycle travel demands and travel patterns in Lexington, Kentucky as generated by SPIN bicycle share users. It is hypothesized that the SPIN users …

Investigation Of The Effect Of Vehicle Color On Safety, Deogratias Eustace, Fayez Khalaf Alanazi, Peter W. Hovey

Civil and Environmental Engineering and Engineering Mechanics Faculty Publications

No abstract provided.

Safety, Operational, And Design Analyses Of Managed Toll And Connected Vehicles' Lanes, Moatz Saad

Electronic Theses and Dissertations

Managed lanes (MLs) have been implemented as a vital strategy for traffic management and traffic safety improvement. The majority of previous studies involving MLs have explored a limited scope of the impact of the MLs segments as a whole, without considering the safety and operational effects of the access design. Also, there are limited studies that investigated the effect of connected vehicles (CVs) on managed lanes. Hence, this study has two main objectives: (1) the first objective is achieved by determining the optimal managed lanes access design, including accessibility level and weaving distance for an at-grade access design. (2) the …

Development Of Decision Support System For Active Traffic Management Systems Considering Travel Time Reliability, Whoibin Chung

Electronic Theses and Dissertations

As traffic problems on roadways have been increasing, active traffic management systems (ATM) using proactive traffic management concept have been deployed on freeways and arterials. The ATM aims to integrate and automate various traffic control strategies such as variable speed limits, queue warning, and ramp metering through a decision support system (DSS). Over the past decade, there have been many efforts to integrate freeways and arterials for the efficient operation of roadway networks. It has been required that these systems should prove their effectiveness in terms of travel time reliability. Therefore, this study aims to develop a new concept of …

A System Dynamics Approach On Sustainability Assessment Of The United States Urban Commuter Transportation, Tolga Ercan

Electronic Theses and Dissertations

Transportation sector is one of the largest emission sources and is a cause for human health concern due to the high dependency on personal vehicle in the U.S. Transportation mode choice studies are currently limited to micro- and regional-level boundaries, lacking of presenting a complete picture of the issues, and the root causes associated with urban passenger transportation choices in the U.S. Hence, system dynamics modeling approach is utilized to capture complex causal relationships among the critical system parameters affecting alternative transportation mode choices in the U.S. as well as to identify possible policy areas to improve alternative transportation mode …

Developing A Traffic Safety Diagnostics System For Unmanned Aerial Vehicles Usingdeep Learning Algorithms, Ou Zheng

Electronic Theses and Dissertations

This thesis presents an automated traffic safety diagnostics solution using deep learning techniques to process traffic videos by Unmanned Aerial Vehicle (UAV). Mask R-CNN is employed to better detect vehicles in UAV videos after video stabilization. The vehicle trajectories are generated when tracking the detected vehicle by Channel and Spatial Reliability Tracking (CSRT) algorithm. During the detection process, missing vehicles could be tracked by the process of identifying stopped vehicles and comparing Intersect of Union (IOU) between the tracking results and the detection results. In addition, rotated bounding rectangles based on the pixel-to- pixel manner masks that are generated by …

Effect Of Moisture Condition On Concrete Core Strengths, Wally Heyen, Lieska Halsey

Nebraska Department of Transportation: Research Reports

The main purpose of this study was to determine if there would be any major differences between curing methods of cores taken for acceptance testing from a highway slab on a project. The comparison provided data to determine the effect of the moisture gradients created by these different curing treatments on core strength and core permeability. The strengths were measured of moist cured cores and sealed plastic bag cured cores from the day cores were obtained (14, 21 and 26 days) until they reached 28 days. Permeability was also measured at 26, 28 and 32 days. According to ASTM C42, …

Investigating The Interaction Of Ndot Hot-Pour Pcc Joint Sealant And Penetrating Concrete Sealers, Bruce Barrett, Dale Byre, Wally Heyen, Lieska Halsey, David Hansen

Nebraska Department of Transportation: Research Reports

Based on the field observations on NE-83, PCS potentially impacts the bond between the concrete and hot-pour sealant after application. If penetrating sealers break the interfacial bond after application, concrete pavements could become compromised and subject to freeze-thaw damage, chloride attack, and other deleterious effects.

The results show that discoloration occurred when applying the five PCS products to the NE-3405 hot-pour sealed testing blocks. All three test methods of application; spraying, 1-min, and 5-min soaks, caused discoloration. The level of discoloration increased with the duration of contact with the PCS. Despite discoloration, none of the five PCS products caused de-bonding …

Research On High-Rap Asphalt Mixtures With Rejuvenators - Phase Ii, Hamzeh Haghshenas, Gabriel Nsengiyumva, Yong-Rak Kim, Kommidi Santosh, Soroosh Amelian

Nebraska Department of Transportation: Research Reports

A previous study by the authors have demonstrated effectiveness of three rejuvenators: R1 (triglyceride/fatty acid: agriculture-tech based), R2 (aromatic extract: petroleum-tech based), and R3 (tall oil: green-tech based) on rejuvenating properties of the aged binder. In that study, it was observed that the rejuvenators made high-RAP mixtures softer and more compliant, which may increase the rutting potential, while they simultaneously improve cracking resistance of the high-RAP materials. Research outcomes and findings from the previous study resulted in consequential research needs for more specific investigation of high-RAP mixtures with rejuvenators in order to achieve realistic implementation into future high-RAP paving projects …

Validation Of The Mechanical Rocker Test Method For Ice Melting Capacity (Mrt-Imc), Lieska Halsey, David Hansen

Nebraska Department of Transportation: Research Reports

The anti-icing and deicing industry has interest in the development of an objective, repeatable test procedure for the evaluation and comparison of anti-icing and deicing products. Pursuant to this goal, the Nebraska Department of Transportation (NDOT) funded research at the University of Nebraska-Lincoln (UNL) to investigate methods for evaluating deicing products, beginning in 2011[1]. Researchers at UNL developed the procedure for the Mechanical Rocker Test for Ice Melting Capacity (MRT or MRT-IMC) in 2014[2].

From 2017-2019, NDOT evaluated the MRT-IMC procedure for validity and suitability as a standard test procedure for assessing deicer performance. NDOT also explored opportunities to improve …

Cpt-Based Pile Design, Chung R. Song, Seunghee Kim, Binyam Bekele, Jingtao Zhang, Alex Silvey

Nebraska Department of Transportation: Research Reports

The geotechnical design of a pile foundation is concerned with the determination of the safe magnitude of an external load that the foundation can carry without jeopardizing the stability of the supported structure. In recent years, in-situ sounding tests are becoming a more attractive method to predict pile capacity due to the rapid development of testing instruments, improved understanding of their mechanics and interpretation, and cost efficiency. The cone penetration test (CPT) and its upgraded version, the piezocone penetration test (PCPT), are the most widely used in situ sounding tests to predict pile capacity. This research report compared eight CPT-based …

Modeling Changes In Public Transit And Private-For-Hire Usage When Implementing A Spatial Tax, Ty Lazarchik

REU Final Reports

Private-for-Hire (PfH) transportation options, such as Uber, Lyft, and taxicabs, are consistently growing in popularity. With this expanded utilization, cities are struggling to maintain usage of their public transit systems. While PfH transportation has been heavily researched, there is a need to further study how its effects on transit usage may be minimized. In this paper, previous work in traffic modeling and analysis of transit and PfH differences are expanded to develop an agent-based decision model in order to simulate and analyze the effectiveness of implementing a location-based tax in and around the city center of Portland, Oregon. The results …

Autonomous Vehicles, Sarah Flis

Williams Honors College, Honors Research Projects

Some research objectives to be considered in this paper will include: What are the general advantages and disadvantages of having fully autonomous vehicles? What research has been done on the safety of them and what needs to be done to improve that safety? In order to have the safest and most efficient system for autonomous vehicles, will there be a place for older vehicles that require a human to operate in this new transportation system? Where does Ohio stand in the development of autonomous vehicles and what steps are they taking to prepare for such technology?

Another important research objective …

Understanding And Modeling Taxi Demand Using Time Series Models, Sabiheh Faghih

Dissertations and Theses

The spatio-temporal variations in demand for transportation, particularly taxis, are impacted by various factors such as commuting, weather, road work and closures, disruption in transit services, etc. Identifying the factors that influence taxi demand and understanding its dynamic provide planners with the information necessary to improve the transportation systems and also help drivers to reduce their vacant time.

This dissertation focuses on important factors affecting the demand. In the beginning, the impact of price changes on the demand is studied. Chapter One discusses how the seasonal effects and trends are removed from the demand, and then price elasticity for demand …

Designing An On-Demand Dynamic Crowdshipping Model And Evaluating Its Ability To Serve Local Retail Delivery In New York City, Shirin Najaf Abadi

Dissertations and Theses

Nowadays city mobility is challenging, mainly in populated metropolitan areas. Growing commute demands, increase in the number of for-hire vehicles, enormous escalation in several intra-city deliveries and limited infrastructure (road capacities), all contribute to mobility challenges. These challenges typically have significant impacts on residents’ quality-of-life particularly from an economic and environmental perspective. Decision-makers have to optimize transportation resources to minimize the system externalities (especially in large-scale metropolitan areas). This thesis focus on the intra-city mobility problems experienced by travelers (in the form of congestion and imbalance taxi resources) and businesses (in the form of last-mile delivery), while taking into consideration …