Civil and Environmental Engineering Commons^™

Utilizing Waste Paper Ash As Partial Cement Replacement In Concrete, Karim Hassan

Thesis/ Dissertation Defenses

The concrete industry has a considerable environmental impact. The manufacture of ordinary Portland cement (OPC) emits a large amount of carbon dioxide, while the extensive extraction of virgin natural aggregates further burdens the environment during concrete production. This thesis is concerned with the development of low-carbon concrete through the combined utilization of waste paper ash (WPA), recycled aggregates, and accelerated carbonation curing. The main objective is to reduce the environmental footprint of concrete products, including masonry units, by enhancing their carbon sequestration potential, decreasing the use of cement, and alleviating reliance on virgin aggregates, while also maintaining adequate mechanical and …

Optimizing Graphene Oxide In Self-Compacting Concrete: A Sustainable Nano-Material Strategy For Enhanced Durability And Structural Performance, Mohammed Shakeebulla Khan, Vijaya G. S

Journal of Sustainable Construction Materials and Technologies

In order to reduce the environmental impact of the constructed world, advanced and sustainable construction materials are needed. This work is a summary of the comprehensive study on a novel self-compacting concrete with nano-engineered material (graphene oxide) modified self-compacting concrete (GO-SCC). The optimum dosage of GO was determined using Taguchi method, Analysis of Variance (ANOVA) and Response Surface Methodology (RSM) multi-objective statistical optimization method, and was found to be 0.10% by weight of cement (bwoc). This dosage of 0.10% GO led to the overall desirability score of 0.87, which confirmed that this was the optimum dosage for six response variables …

Deep Q Network For Adaptive Pelican Crossing Signal Optimization Balancing Pedestrian Safety And Vehicular Efficiency, Amalia Yasmin Chairunnisa, Andyka Kusuma, Jachrizal R. Sumabrata

Smart City

Static pelican crossing systems often fail to accommodate the stochastic arrival patterns prevalent in high-density transit-oriented development (TOD) zones, creating operational inefficiencies between pedestrian clearance and vehicular flow. At the Cikini Station transit hub in Jakarta, existing fixed signal cycles contribute to pedestrian delays and peak-hour congestion. This study evaluates an adaptive signal control model for mid-block pelican crossings using a Deep Q-Network (DQN) algorithm. To calibrate the simulation, empirical data were extracted from field CCTV footage using the YOLOv8 algorithm, accurately capturing 15-minute peak flow fluctuations and commuter surges. The system is formulated as a Markov Decision Process (MDP) …

Development Of An Adaptive Pelican Crossing Model Using Fuzzy Logic In Mixed Traffic Conditions, Manazil Adam, Andyka Kusuma, R. Jachrizal Sumabrata

Smart City

Traffic management at at-grade pedestrian crossing facilities (pelican crossings) in highly populated areas, such as the Universitas Indonesia Station, faces significant inefficiency challenges. During peak hours, the fixed-time system is frequently disabled and replaced with subjective manual control by security personnel, thereby triggering irregular stop-and-go cycles and a high accumulation of vehicle delays. This study aims to develop a hybrid adaptive control model integrating Computer Vision, Genetic Algorithm (GA), and Fuzzy Logic to optimize intersection performance under mixed traffic conditions. The research methodology begins with the extraction of traffic and pedestrian characteristic data, calculated manually through recorded field observations. This …

Quantifying The Impacts Of The Covid-19 Pandemic And Water Tariff Reforms On Domestic Water Consumption In The Emirate Of Abu-Dhabi, Darin Ibrahim Khedr

Thesis/ Dissertation Defenses

The study of domestic water consumption is of critical importance, particularly in hot and arid regions where limited natural water resources and growing demand place increasing pressure on water supply systems. The Emirate of Abu Dhabi, represents an important case study, as domestic water demand is a major concern for policymakers and water resource managers. The emirate experiences an extremely arid climate and depends heavily on desalination to satisfy water requirements across all sectors. The primary objective of this study is to investigate the impacts of the COVID-19 pandemic on domestic water consumption in the Emirate of Abu Dhabi and …

Beneficial Investigation Of Sustainable Recycled Waste Plastic In Treating The Consolidation Behavior Of Fine Soil, Aram Mohammed Raheem, Cumaraswamy Vipulanandan, Mohammed Hiwa Abdullrahman, Ali Tariq Omer

Journal of Sustainable Construction Materials and Technologies

Recycled waste plastic is one of the regular garbage utilized as a sustainable material in soil remediation. This study examines the efficacy of utilizing local recycled waste plastic as an ecological quantifiable along with soil containing fine particles to analyze the consolidation behavior. Various recycled waste plastic contents ranging from 2% to 10% were employed experimentally in two patterns where in the first pattern the recycled waste plastic were mixed as dry material with the fine soil particles while in the second pattern a sandwich layer of 10% of the recycled waste plastic was placed in the middle of the …

Enhanced Thermal Energy Storage In Buildings: Impregnation, Leakage, And Environmental Performance Of Organic And Inorganic Pcm Composites, Gökhan Genç, Esra Yılmaz, M. Yusuf Yazıcı

Journal of Sustainable Construction Materials and Technologies

This study experimentally investigates the impregnation and leakage performance of various organic (tobacco, sawdust, bay leaf, black cumin) and inorganic (vermiculite, perlite, bentonite, sepiolite) carrier materials used for phase change material (PCM) integration in building applications. The commercial paraffin-based PCM RT-31 was used as the thermal storage medium. Impregnation and leakage tests were conducted to evaluate the PCM absorption capacity, form stability, and energy storage potential of each carrier. The results revealed that perlite (C = 80%) and bay leaf (C = 78%) exhibited the highest impregnation capacities due to their porous and fibrous structures; however, they also demonstrated significant …

Modeling Of Tensile Stress-Strain Response For Steel Fiber Reinforced Self-Compacting Concretes, Anıl Niş, Nilufer Özyurt, Turan Özturan

Journal of Sustainable Construction Materials and Technologies

Main aim of the research was to further understand self-compacting concrete reinforced with steel fibers (SFR-SCC) behavior and to contribute modeling of the tensile stress-strain diagrams for the standardization of the fiber reinforced materials for structural utilization. Fiber reinforced materials has not been used without structural rebar because of the absence of stress-strain curve in tension required for the structural design codes. Hence, an inverse analysis (multi-layer model) was further modified for various steel fibers to predict tensile stress-strain behaviour. For this purpose, 5 different mixes; control, reinforced with long fibers with 0.5% and 1%, short fiber with 0.5% and …

Transforming Dredged Sediment Into Reactive Clay: Critical Review Of Calcination, Reactivity, And Sustainable Valorization As Supplementary Cementitious Material, Seongho Han, Sanghwon Wi, Koochul Ji, Keun Hyeok Yang, Farshad Rajabipour, Kamal H. Khayat, Jinyoung Yoon

Civil, Architectural and Environmental Engineering Faculty Research & Creative Works

Dredged sediment (DS) is generated worldwide in large volumes through routine port and waterway maintenance, yet its disposal presents environmental and economic challenges. Recently, calcined dredged sediment (CDS) has emerged as a supplementary cementitious material (SCM), offering a viable alternative to traditional SCMs, such as fly ash and slag cement. This review synthesizes current knowledge on the physical, chemical, and mineralogical characteristics of raw DS and pretreatment strategies aimed at dewatering, organic matter removal, and contaminant stabilization. The effects of calcination on the production of reactive amorphous aluminosilicates are also discussed. Emphasis is placed on physicochemical changes revealed by experimental …

Low-Carbon Concrete For Sustainable Construction: A Comprehensive Review Of Performance Characteristics, Implementation Challenges, And Decarbonization Pathways, Fazel Azarhomayun, Jingjie Wei, Kamal H. Khayat

Civil, Architectural and Environmental Engineering Faculty Research & Creative Works

Reducing the carbon footprint of concrete has become a central objective in sustainable construction. Low-carbon concrete (LCC), developed primarily through clinker reduction, supplementary cementitious materials, and alternative binder strategies, offers a promising route for lowering embodied emissions while maintaining the performance requirements of structural concrete. This comprehensive review consolidates the current state of knowledge on LCC, identifies critical research and implementation gaps, and examines its material composition, mixture-design methodologies, performance characteristics, structural applications, implementation challenges, and decarbonization pathways. Single-SCM systems have been reported at clinker-replacement levels approaching 50%, although durability at these replacement levels, particularly carbonation resistance, remains system- and …

From Aspiration To Obligation: A Contractual Sustainability Framework For The Egyptian Construction Industry, Salma Ali

Theses and Dissertations

The construction industry is responsible for approximately 40% of global energy consumption and 35% of total waste generation, making it one of the most significant contributors to the global sustainability challenge. In Egypt, that challenge takes a specific contractual form. Egypt’s construction sector contributes approximately 23% of national energy consumption, yet the survey findings reveal that 63.5% of construction professionals report that sustainability clauses rarely or never appear in contracts, and only 11.5% confirm the presence of enforceable provisions with measurable targets. This gap is structural rather than attitudinal. Competitive procurement penalises voluntary sustainability investment, and without contractual obligation, awareness …

Flexible-Mode Multi-Skilled Resource-Constrained Project Scheduling Problem With Setup Times: Application In The Oil And Gas Industry, Safinaz M. El Dawody

Theses and Dissertations

Turnaround maintenance (TAM) in the petroleum refining sector requires coordinating geographically dispersed project portfolios under stringent resource, schedule, and budget constraints. Conventional scheduling models treat tasks in isolation, failing to account for shared resources, crew fatigue, or inter-site transit. To bridge this gap, this study introduces and empirically validates a Flexible-Mode Multi-Skilled Resource-Constrained Project Scheduling Problem with Setup Times (FM-MS-RCPSP-ST). Applied to a real-world portfolio of 76 TAM projects across five governorates in Egypt, the framework is operationalized through an 11-stage pipeline integrating NSGA-II multi-objective optimization, GIS-based routing, and 500-trial Monte Carlo disruption simulations.

Results demonstrate that incorporating mandatory crew-rest …

Assessing Planetiq Gnss-Ro Ionospheric Electron Density And Tecusing Ground-Based Ionosondes And Cosmic-2, Mohammed Alheyf, Mohamed S. Yamany, Ibrahim F. Ahmed

Faculty Publications

Radio occultation (RO) has become a key technique for monitoring the ionosphere by deriving electron density (Ne) profiles and total electron content (TEC) from GNSS signals. This study assesses the newly deployed PlanetiQ GNOMES constellation by validating its ionospheric Ne profiles and profile-based TEC against collocated measurements from ionosondes and the COSMIC-2 mission under both quiet and disturbed geomagnetic conditions. Data matching for the statistical validation uses conservative spatial thresholds of less than 1◦ in latitude and longitude and temporal limits of 30 min for ionosondes and 1 hfor COSMIC-2, supported by a dedicated sensitivity analysis, whereas storm-time case studies …

Sustainable Surface Treatments Using Dry-Process Rubber-Modified Asphalt In Cold Regions: A Laboratory, Field, And Lca Study, Sepehr Mohammadi, Dongzhao Jin, Meng Wu, Zhongda Liu, Zhanping You

Michigan Tech Publications

The incorporation of crumb rubber derived from waste tires in asphalt pavements has gained increasing attention as a strategy to enhance performance while reducing environmental impacts, particularly in cold regions such as the Midwestern United States, where pavements are subjected to severe thermal stresses and freeze–thaw cycles. Despite the numerous performance benefits observed in previous laboratory-scale studies, field demonstrations can play a critical role in validating the use of recycled waste tires as asphalt additives. This study examines the performance benefits and environmental impacts of incorporating recycled tire rubber into asphalt mixtures via a dry modification process for cold-climate applications. …

An Integrated Sensor-Fusion Framework For Performance-Based Compensation In Construction, Aly Ayman El-Ashry

Theses and Dissertations

Construction productivity has historically stagnated due to a reliance on subjective labor monitoring and “lagging” performance indicators. This research proposes a novel compensation model with the use of Total Energy Management System (TEMS) to translate labor effort and efficiency into payment incentives with the integration of Internet of Things (IoT) wearables and Statistical Process Control (SPC) charts.

This research addresses the systemic problem of declining construction productivity caused by industry’s inability to objectively quantify human effort. While traditional models rely on post-facto production tallies, a significant research gap exists in real-time physiological labor monitoring. To bridge this, the proposed TEMS …

Moisture-Induced Degradation And Mechanical Durability Of Mineral-Filled Polylactide (Pla) Composites, Barbara Szaraniec, Aleksandra Ptaszkowska, Alicja Rapacz-Kmita

Journal of Sustainable Construction Materials and Technologies

This study investigates the influence of mineral fillers on the hydrolytic stability and mechanical durability of polylactide (PLA) composites under accelerated aqueous ageing conditions. Composites containing halloysite nanotubes (HNT) and bentonite-based fillers (BM, BS, BSP) at 2 wt.% were prepared using a powder-coating and injection moulding approach. Accelerated hydrolytic degradation was conducted at 50 °C for up to six weeks. The degradation behaviour was evaluated through mass variation, water absorption, incubation medium analysis (pH and electrical conductivity), mechanical testing, surface observations, and contact angle measurements. The results revealed a clear filler-dependent response. Bentonite-filled composites exhibited increased water absorption and accelerated …

Methylglyoxal And Glyoxal In High-Puff Disposable Electronic Cigarette Liquids: Unexpected Accumulation And Enhanced Cytotoxicity, Esther E. Omaiye, Wentai Luo, Kevin J. Mcwhirter, Man Wong, Prue Talbot

Civil and Environmental Engineering Faculty Publications and Presentations

Despite concerns regarding the potential health risks associated with EC use, their design, puff count, and e-liquid formulations have continued to evolve. Aldehydes are a key class of thermal degradation byproducts generated during the vaporization of EC fluids. This study tested the hypothesis that aldehyde concentrations would be elevated in used ECs with high puff numbers. Devices from multiple brands were analyzed to assess the impact of extended use on aldehyde formation. E-fluids were extracted from field-collected and user-donated devices and analyzed using gas chromatography/mass spectrometry to quantify 178 flavor chemicals, two synthetic coolants, nicotine, solvents, and aldehydes (methylglyoxal (MGO), …

The Impact Of Using Microencapsulated Phase Change Materials In Asphalt Binder And Mixtures, Ayyaz Fareed

Theses and Dissertations

Asphalt concrete is a widely used paving material for roadway construction; however, pavement distresses such as thermal cracking (non-load associated), fatigue cracking (load-associated), and rutting (permanent deformation) continue to challenge the performance and longevity of flexible pavements. These issues diminish ride quality, reduce service life, and contribute to increased maintenance needs. Several modifiers, including polymers and fibers, have been used to mitigate pavement deterioration, yet improving the thermal response of asphalt mixtures remains a significant concern, particularly in climates with substantial temperature fluctuations. Microencapsulated Phase Change Materials (MPCMs) have recently emerged as a promising solution due to their ability to …

Applications Of Geosynthetics In Tunnels Construction: A Sustainable Approach To Carbon Footprint Reduction, Ibraheem Rais, Abdullah H. Alsabhan, Md. Rehan Sadique, Shamshad Alam

Journal of Sustainable Construction Materials and Technologies

The use of geosynthetics has transformed tunnelling practices by enhancing structural integrity, durability, and environmental sustainability. This review adopts a systematic literature review design, covering publications from 2000 to 2025 sourced from Scopus, Web of Science, ScienceDirect, and Google Scholar. The selected studies were screened based on relevance, quality, and focus on tunnelling applications, then thematically analyzed into four domains: geosynthetic types, applications, sustainability, and performance evaluation. This review focuses on the applications of various geosynthetics, including geotextiles, geogrids, geocomposites, geocells, and geomembranes, in tunnelling projects. These materials play crucial roles in reinforcing tunnel walls and slopes, improving load distribution, …

Sustainable Waste Valorization: Chitosan From Shrimp Shells For Eco-Friendly Cement Mortars And Global Nexus, Dalia A. Ali Associate Prof., Rahma H. Thabet Dr., Norah Alwadai Associate Prof., Fekri Abdulraqeb Ahmed Ali Prof., Ahmed S. Al-Fatesh Prof., Zeinab A. Etman Prof.

Chemical Engineering

This study addresses environmental and economic challenges by investigating the valorization of green shrimp shell biowaste into chitosan for application as an eco-friendly, sustainable, and multifunctional cement mortar additive. Chitosan synthesized from shrimp shells was systematically incorporated into high early-strength hydraulic cement mortar specimens ranging from 0 wt% to 1.5 wt% in the presence of silica sand. The influence of chitosan incorporation on the properties of cement mortars was systematically investigated, including mechanical performance (compressive strength and setting time), the underlying mechanism of chemical interactions, and microstructural development. X-ray diffraction (XRD) analysis was performed on the extracted chitosan to confirm …