Other Civil and Environmental Engineering Commons^™

Analysis Of Pervious Oyster Shell Habitat (Posh) Unit Performance Using Computational Fluid Dynamics, Lauren E. Cope

UNF Graduate Theses and Dissertations

In recent years, pervious oyster shell habitat (POSH) units have been developed and deployed as part of living shoreline projects in Northeast Florida. POSH units are modular artificial oyster reef structures made from cement and recycled oyster shells. POSH units aim to attenuate wave energy, trap sediment, restore salt marsh habitat, and improve oyster recruitment. Previous studies demonstrated the units’ ability to attract oyster larvae and reduce shoreline bed stress in some areas. This paper looks to further understand the effect of POSH unit placement on bed stress under boat wake conditions using computational fluid dynamics (CFD). Results indicated that …

Hdd Dataset: Optimising Retrofitted Insulation For Irish Residential Building Walls, Rakshit D. Muddu, Aimee Byrne, Anthony James Robinson

Datasets

In this study, a thermal-economic analysis was conducted to determine the optimum insulation thickness of retrofitted insulation walls in different regions in Ireland. This was based on the Heating Degree Day method (HDD). This dataset contains optimum insulation thickness, payback period, cost savings and carbon emission for all 25 counties in the Republic of Ireland

Phosphorus Release And Recovery From Simulated Ferric Wastewater Sludge, Aseel Alnimer

Theses and Dissertations (Comprehensive)

Phosphorus (P) is a fundamental element necessary for all life forms and a key component in the fertilizer industry. Meanwhile, the excessive load of P to water bodies due to human activities has the potential to promote eutrophication. Wastewater treatment plants remove P either biologically or chemically and produce P rich sludge which could be a potential renewable source for P. At present, commercial technologies exist for P recovery from biological wastewater sludge. However, P recovery from chemical sludge particularly iron(III)-phosphate (Fe-P) sludge generated in chemical P removal plants that use iron(III) salts remains a challenge.

This study explored, in …

The Combined Impact Of Redcedar Encroachment And Climate Change On Water Resources In The Nebraska Sand Hills, Yaser Kishawi, Aaron R. Mittelstet, Zablon Adane, Nawaraj Shrestha, Paolo Nasta

Department of Agricultural and Biological Systems Engineering: Faculty Publications

The Nebraska Sand Hills (NSH) is considered a major recharge zone for the High Plains Aquifer in the central United States. The uncontrolled expansion of the eastern redcedar (Juniperus Virginiana) under climate warming is posing threats to surface water and groundwater resources. The combined impact of land use and climate change on the water balance in the Upper Middle Loup River watershed (4,954 km²) in the NSH was evaluated by simulating different combination of model scenarios using the Soil Water Assessment Tool (SWAT) model. A total of 222 climate models were ranked according to the aridity …

Evaluation For Using Expended Bioelectrochemical Systems As Soil Amendments For Improved Corn Plant Growth And A Drought Resistant Soil., Jackson Lee Sauers

Theses and Dissertations

A long-held practice is to mix agricultural soil with a soil amendment to improve growing conditions in crops. A common soil amendment is biosolids produced from both municipal and dairy wastewater due to the macro- and micronutrients within it. Both the agricultural and wastewater industries are participating in the Circular Economy concept (CEC). Two experiments explored using expended bioelectrochemical systems (BES) that treated either synthetic dairy wastewater (DWW) or synthetic municipal wastewater (SWW) as soil amendments to improve corn plant growth when treated with three different nutrient treatments: 100%- 50%- and 0% Hoagland Nutrient Solutions. Biochar and used terracotta clay …

Estimation Of Cotton Canopy Parameters Based On Unmanned Aerial Vehicle (Uav) Oblique Photography, Jinyong Wu, Sheng Wen, Yubin Lan, Xuanchun Yin, Jiantao Zhang, Yufeng Ge

Department of Agricultural and Biological Systems Engineering: Faculty Publications

Background: The technology of cotton defoliation is essential for mechanical cotton harvesting. Agricultural unmanned aerial vehicle (UAV) spraying has the advantages of low cost, high efficiency and no mechanical damage to cotton and has been favored and widely used by cotton planters in China. However, there are also some problems of low cotton defoliation rates and high impurity rates caused by unclear spraying amounts of cotton defoliants. The chemical rate recommendation and application should be based upon crop canopy volume rather than on land area. Plant height and leaf area index (LAI) is directly connected to plant canopy structure. …

Comparative Study Of Differentiating Human Pluripotent Stem Cells Into Vascular Smooth Muscle Cells In Hydrogel-Based Culture Methods, Qing Liu, Zhen Liu, Hongyu Gu, Yuxia Ge, Xuesheng Wu, Fuxing Zuo, Qian Du, Yuguo Lei, Zhanqi Wang, Haishuang Lin

Department of Agricultural and Biological Systems Engineering: Faculty Publications

Vascular smooth muscle cells (VSMCs), which provides structural integrity and regulates the diameter of vasculature, are of great potential for modeling vascular-associated diseases and tissue engineering. Here, we presented a detailed comparison of differentiating human pluripotent stem cells (hPSCs) into VSMCs (hPSCs-VSMCs) in four different culture methods, including 2-dimensional (2D) culture, 3-dimensional (3D) PNIPAAm-PEG hydrogel culture, 3-dimensional (3D) alginate hydrogel culture, and transferring 3- dimensional alginate hydrogel culture to 2-dimensional (2D) culture. Both hydrogel-based culture methods could mimic in vivo microenvironment to protect cells from shear force, and avoid cells agglomeration, resulting in the extremely high culture efficiency (e.g., high …

Behavior Of Completely Automated Evapotranspiration Estimation (Eemetric), Atiqullah Atif

Department of Civil and Environmental Engineering: Dissertations, Theses, and Student Research

Evapotranspiration (ET) is the second-largest component in the water balance equation, globally consuming 70% of the earth’s annual precipitation. Accurate and consistent estimation of ET is essential for ensuring water resources sustainability, proper management, planning, and regulations of water resources. Though a 100% accurate estimation of ET may not be feasible with the current technology, there are proven techniques that give us estimates of ET we can heavily rely on. Mapping Evapotranspiration at High Resolution with Internalized Calibration (METRIC) is a widely used surface energy balance model that produces relatively accurate ET maps utilizing remote sensing data and requires skilled …

Project Selection In Facility And Infrastructure Maintenance Organizations, Bayram M. Kurbanov

Theses and Dissertations

The current Air Force Civil Engineer Center (AFCEC) built infrastructure Facility Sustainment Restoration and Modernization (FSRM) portfolio management methodology results in an unbalanced project portfolio. The consequence of this unbalance is that majority of the funding goes towards buildings on the flightline and Facility Support Services activities do not get adequate funding which leads to further deterioration of those facilities. This research investigates whether decision support framework based on Value-Focused Thinking (VFT) process yields better project selection outcomes for facility and infrastructure maintenance organizations. To accomplish that, the investigation focuses on understanding current AFCEC decision support methodology, building an alternative …

Measuring Acoustic Nonlinearity Of Elastic Materials Using Thermal Modulation Of Ultrasonic Waves, Bibo Zhong

Department of Civil and Environmental Engineering: Dissertations, Theses, and Student Research

Nonlinear acoustic techniques have been used to determine the nonlinear properties of materials. Existing methods either require complex equipment to measure absolute nonlinear coefficients or can only be used on laboratory-sized specimens. A recently developed thermal modulation method addresses the limitations of existing methods, but further theoretical analysis and validation are required.

In this dissertation, theoretical analyses were first conducted to study the mechanically and thermally induced acoustoelastic effect. Beginning with the wave equation, the relationship of the ultrasonic wave velocity with respect to mechanical strain and the thermal strain was derived in detail. These analyses provided theoretical support for …

Erosion And Resuspension Of Cohesive Sediments In Coastal Louisiana, Laith Qasem Shamaileh

LSU New Orleans Theses and Dissertations

The research presented in this study is motivated by the need to improve the predictions of cohesive sediment erosion and subsequent transport. In addition, the knowledge of the geotechnical engineering soil properties related to the erosion of sediments in coastal Louisiana has broad implications as these properties are used in transport models guiding the current restoration efforts. The erosion measuring device used in the study is the Cheng-Han Tasi and Wilbert Lick Shaker. Previous studies have been conducted before using the Shaker, but challenges with the calibration of the shear stress hampered the resuspension results produced by the Shaker. Therefore, …

Mango Surface Color Features Measurement Using Digital Image Processing, Md Towfiqur Rahman, Goutom Kumar, Md Abdul Momin

Department of Agricultural and Biological Systems Engineering: Faculty Publications

Summary

Postharvest processing of agricultural produce is still done the conventional way in Bangladesh. Manual grading of agricultural produce, especially fruits and vegetables, is laborious and costly due to acute shortage of labor during the peak season, as well as difficulty maintaining the product quality. Machine vision system (MVS) applications are widely used nowadays as a non-destructive and cost-effective technology for automatically grading and sorting large volumes of produce in the packing house according to size, shape, color, texture, and surface defects. In this study, a simple MVS was constructed measuring different color features of mango fruit surface as a …

Framework For The Use Of Extended Reality Modalities In Aec Education, Barbara Oliveira Spitzer, Jae Hoon Ma, Ece Erdogmus, Ben Kreimer, Erica Ryherd, Heidi Diefes-Dux

Department of Agricultural and Biological Systems Engineering: Faculty Publications

The educational applications of extended reality (XR) modalities, including virtual reality (VR), augmented reality (AR), and mixed reality (MR), have increased significantly over the last ten years. Many educators within the Architecture, Engineering, and Construction (AEC) related degree programs see student benefits that could be derived from bringing these modalities into classrooms, which include but are not limited to: a better understanding of each of the subdisciplines and the coordination necessary between them, visualizing oneself as a professional in AEC, and visualization of difficult concepts to increase engagement, self-efficacy, and learning. These benefits, in turn, help recruitment and retention efforts …

Active Rheological And Stiffening Control Of Cementitious Systems For Additive Manufacturing, Abdul Basit Peerzada

All Dissertations

Technological advancements and automation in the last two decades have made additive manufacturing of cementitious systems a reality. Among all the additive manufacturing techniques used for cementitious materials, layer-by-layer extrusion-based printing is the most used technique. For a layer-by-layer printing process, the requirements of cementitious materials vary from those of a conventional construction process. Typically, the cementitious materials are pumped to a print head using a positive-displacement pump. The pumpability of the cementitious material for a specific pumping system depends on its rheological properties. For effective pumping, the yield stress and plastic viscosity of a cementitious system should be low. …

Empirical Fragility Functions And Numerical Parametric Study For Buckling Of Steel Grain Bins Under High Wind Loads, Andrew Ruder

Department of Civil and Environmental Engineering: Dissertations, Theses, and Student Research

While rural infrastructure is critical to the agricultural industry, it has been historically more susceptible to damage and slower to recover following natural disasters than its urban and suburban counterparts. This has been made evident most recently by the events of the August 10, 2020, derecho in which rural regions in Iowa were among the hardest hit areas with sustained windspeeds exceeding 120 mph. Among the most frequently damaged structures in this event were corrugated steel grain bins, which farmers and co-ops use to dry and store certain commodities. Unlike most other critical structures, steel grain bins are not designed …

Evaluation Of Swelling Pressure And Shear Strength Of Inorganic Microfiber-Reinforced Bentonite For The Engineered Barrier System, Jose Maria Ferdinand Victoria Calaunan

Department of Civil and Environmental Engineering: Dissertations, Theses, and Student Research

Nowadays, the permanent disposal of high-level radioactive waste materials has been a primary concern in several countries. The deep geological repository, being the preferred disposal method across the globe, utilizes a network of engineered barriers to prevent the radioactive material from spreading throughout the facility and harming the natural environment. Part of this engineered barrier system (EBS) is the buffer material, which essential function is holding the radioactive waste-containing canister in place. However, the potential generation of desiccation cracks in this buffer material is imminent due to the heat emitted from the radioactive waste. Knowing the capability of inorganic fibers …

The Living Breakwaters Pdr Efforts Econcrete Resource Analysis, Guianina Ferrari, Shervon Stephens, Calvin O. Walters Jr.

Publications and Research

On October 29, 2012, Superstorm Sandy impacted 443,000 people and caused nearly $19 billion (about $58 per person in the US) worth of damage within New York City. As part of the New York City infrastructure reparation plan, the Living Breakwaters project in Tottenville addressed coastal resilience, allocating $100M of public funds to a series of artificial breakwaters by the southwest coast of Staten Island. Each breakwater is constructed and designed to mitigate water flow in storm events. ECOncrete, a primary element of the breakwater, is a specialty cast cementitious product that is marine organism-friendly that encourages biocalcification and photosynthesis. …

Data-Driven Analysis For Facility Management In Higher Education Institution, Ashish Kumar Pampana, Jungho Jeon, Soojin Yoon, Theodore J. Weidner, Makarand Hastak

Civil and Environmental Engineering and Engineering Mechanics Faculty Publications

Planned Preventive Maintenance (PPM) and Unplanned Maintenance (UPM) are the most common types of facility maintenance. This paper analyzes current trends and status of Facility Management (FM) practice at higher education institutions by proposing a systematic data-driven methodology using Natural Language Process (NLP) approaches, statistical analysis, risk-profile analysis, and outlier analysis. This study utilizes a descriptive database entitled "Facility Management Unified Classification Database (FMUCD)" to conduct the systematic data-driven analyses. The 5-year data from 2015 to 2019 was collected from eight universities in North America. A preprocessing step included but was not limited to identifying common data attributes, cleaning noisy …

Application Of Uas‑Based Remote Sensing In Estimating Winter Wheat Phenotypic Traits And Yield During The Growing Season, Kianoosh Hassani, Hamed Gholizadeh, Saleh Taghvaeian, Victoria Natalie, Jonathan Carpenter, Jamey Jacob

Department of Agricultural and Biological Systems Engineering: Faculty Publications

Phenotyping approaches have been considered as a vital component in crop breeding programs to improve crops and develop new high-yielding cultivars. However, traditional field-based monitoring methods are expensive, invasive, and time-intensive. Moreover, data collected using satellite and airborne platforms are either costly or limited by their spatial and temporal resolution. Here, we investigated whether low-cost unmanned/unoccupied aerial systems (UASs) data can be used to estimate winter wheat (Triticum aestivum L.) nitrogen (N) content, structural traits including plant height, fresh and dry biomass, and leaf area index (LAI) as well as yield during different winter wheat growing stages. To achieve …

Canopycam – An Edge-Computing Sensing Unit For Continuous Measurement Of Canopy Cover Percentage Of Dry Edible Beans, Wei-Zhen Liang, Joseph Oboamah, Xin Qiao, Yufeng Ge, Robert M. Harveson, Daran Rudnick, Jun Wang, Haishun Yang, Angie Gradiz

Department of Agricultural and Biological Systems Engineering: Faculty Publications

Canopy cover (CC) is an important indicator for crop development. Currently, CC can be estimated indirectly by measuring leaf area index (LAI) using commercially available hand-held meters. However, it does not capture the dynamics of CC. Continuous CC monitoring is essential for dry edible beans production since it can affect crop water use, weed, and disease control. It also helps growers to closely monitor “yellowness”, or senescence of dry beans to decide proper irrigation cutoff timing to allow the crop to dry down for harvest. Therefore, the goal of this study was to develop a device – CanopyCAM, containing software …