Loading On Long Span Bridges In Heavily Trafficked Areas,
2020
School of Engineering, University of Limerick, Limerick, Ireland
Loading On Long Span Bridges In Heavily Trafficked Areas, Michael Quilligan, Eugene O'Brien
Civil Engineering Research in Ireland 2020
The critical traffic loading condition for long-span bridges is congestion when vehicles may be closely spaced together. Data on very high traffic flows is limited however, as induction loops which are typically used to collect traffic data, are ineffective when traffic flow breaks down. A number of long span bridges are located in areas of high traffic with periods of recurring congestion occurring daily. While the inter-vehicle gap distances are greater than those occurring during non-recurring full stop accident type events, the high frequency of the recurring congestion events can increase the probability of a critical load case occurring.
A Numerical Study Of The Effect Of Wind Barriers On Traffic And The Bridge Deck,
2020
School of Civil Engineering, University College Dublin, Ireland
A Numerical Study Of The Effect Of Wind Barriers On Traffic And The Bridge Deck, Yuxiang Zhang, Philip Cardiff, Jennifer Keenahan
Civil Engineering Research in Ireland 2020
Wind actions can have a great impact on both bridges and traffic on bridges. However, structures designed to shelter the traffic from wind can influence the aerodynamic performance of the bridge deck, especially for long-span bridges. This study compares the effect of non-perforated walls and perforated walls used as wind barriers for traffic by conducting Computational Fluid Dynamics (CFD) simulations on three-dimensional geometries of a four-lane bridge deck. Steady-state simulations employ the Reynolds-Averaged Navier Stokes (RANS) method with the k-epsilon turbulence model and all simulations use parallel computing. An open-sourced software OpenFOAM is used.
Long-Run Traffic Simulations For Multi-Lane Road Bridges,
2020
Roughan & O’Donovan Innovative Solutions, Dublin, Ireland
Long-Run Traffic Simulations For Multi-Lane Road Bridges, Róisín Donnelly, Lorcan Connolly, Ilaria Bernardini
Civil Engineering Research in Ireland 2020
The maintenance and repair of ageing bridges is a concern for road infrastructure managers. This issue is amplified by the increasing weights and frequency of travel of freight vehicles in recent times. In order to accurately assess the risk of damage for road bridges, it is essential to have knowledge of both historical and current bridge loading. When available, site-specific Weigh-in-Motion (WIM) data can be effective in creating representative load models for a structure. However, for cases where WIM data is not available and in cases where future damage must be predicted, it is necessary to simulate appropriate data using …
Simulation Of Traffic Loading On Long Span Bridges,
2020
School of Engineering, University of Limerick, Ireland
Simulation Of Traffic Loading On Long Span Bridges, Hang Zhang, Michael Quilligan
Civil Engineering Research in Ireland 2020
Existing long span load models have typically been developed using a number of conservative assumptions, and as such are more applicable to the design of new bridges rather than the assessment of existing structures. Excessive conservatism in such assumptions can lead to expensive and unnecessary interventions in existing bridges. Furthermore, existing load models do not always allow for correlations in traffic weights and vehicle positions on the bridge.
Repair & Rehabilitation Of Daly's (Shakey) Bridge, Cork City,
2020
RPS Group Ltd., Innishmore, Ballincollig, Cork, Ireland
Repair & Rehabilitation Of Daly's (Shakey) Bridge, Cork City, Michael Minehane, John Gamble
Civil Engineering Research in Ireland 2020
This paper describes the rehabilitation of (Shakey) Bridge, an existing single-span suspension bridge crossing the northern channel of the River Lee in Cork City. The bridge was opened in 1927 to replace an earlier ferry crossing at the same location. Daly’s bridge is included on the Record of Protected Structures and the National Inventory of Architectural Heritage. It remains the only suspension bridge in Cork City and is the only surviving bridge of its kind in Ireland. It is considered to be a significant contributor to the architectural heritage of the city. This case study describes the project development including …
Development And Testing Of A Deployable Double Layer Tensegrity Grid,
2020
School of Engineering, University of Limerick, Limerick, Ireland
Development And Testing Of A Deployable Double Layer Tensegrity Grid, Michael Quilligan, Valentin Gomez-Jauregui, Cristina Manchado, Cesar Otero
Civil Engineering Research in Ireland 2020
Tensegrity is a structural principle based on the use of isolated or contiguous pin jointed components in compression inside a net of continuous tension. Although the concept has been studied for many decades, relatively few examples of tensegrity structures have been used for civil engineering purposes.
Reinforcement Of Timber Elements In Compression Perpendicular To The Grain Using Compressed Wood Dowels,
2020
Collage of Science and Engineering & Ryan Institute, National University of Ireland Galway, University Road, Galway, Ireland
Reinforcement Of Timber Elements In Compression Perpendicular To The Grain Using Compressed Wood Dowels, Michael Conway, Conan O'Ceallaigh, Sameer Mehra, Annette M. Harte
Civil Engineering Research in Ireland 2020
In the past decade, there has been an increased focus on the environmental impacts of construction and a movement towards more sustainable construction products. Timber is one such sustainable product that can achieve these environmental targets but, while timber has a high strength-to-weight ratio parallel to the grain, it demonstrates poor strength perpendicular to the grain. As a result, stress perpendicular to the grain is an important factor in the design of timber structures, especially in areas of concentrated loading, such as supports. This paper describes a study, which examines the use of compressed wood dowels as a sustainable alternative …
An Evaluation Of Design Issues Identified During Reviews Of Structural Designs Of Buildings From 2015 To 2020,
2020
School of Civil and Structural Engineering, Technological University Dublin, Bolton St., Dublin 1, Ireland
An Evaluation Of Design Issues Identified During Reviews Of Structural Designs Of Buildings From 2015 To 2020, Patrick Crean, Richard Osborne
Civil Engineering Research in Ireland 2020
A recent study on failures of structures in Ireland indicated that approximately 40% could be apportioned to designer error. A 2019 report into recent structural cracking of a high-rise building in Sydney Australia recommended that Independent third party checking by a Chartered Engineer should be a requirement on all major projects prior to construction. The report also stated that the critical elements of the design on these projects should be identified. It is obvious that a certain percentage of buildings constructed each year contain design flaws and only a small proportion of these ever result in a failure. However there …
A Review Of The Engineering Constraints And Project Management Challenges Involved In Utilising Scot’S Church As A Heritage Asset Through Responsible Adaptive Reuse And Conservation Strategies,
2020
School of Engineering, Trinity College, University of Dublin
A Review Of The Engineering Constraints And Project Management Challenges Involved In Utilising Scot’S Church As A Heritage Asset Through Responsible Adaptive Reuse And Conservation Strategies, Óisín Smith
Civil Engineering Research in Ireland 2020
In the field of structural building, there has been a rising popularity in adaptive reuse of older structures, which stems from a variety of stimuli. Apart from preserving built heritage, providing old buildings with new functions promotes sustainability while preventing and containing urban sprawl. Target 11.4 of the United Nation’s Sustainable Development Goals Agenda 2030 explicitly outlines that “more efforts to protect and safeguard the world’s cultural and natural heritage” are required. In order to valorise and regenerate obsolescent structures, intervention is often required. The dissertation provides a comprehensive overview of conservation engineering and demonstrates the importance of an engineer’s …
Potential Of A Low-Calcium Fly Ash (Fa) For The Production Of Alkali-Activated Materials.,
2020
Dept of Civil Engineering, Trinity College Dublin, Dublin, Ireland
Potential Of A Low-Calcium Fly Ash (Fa) For The Production Of Alkali-Activated Materials., Omar Alelweet, Sara Pavia
Civil Engineering Research in Ireland 2020
Coal-FA from power stations is an industrial waste abundantly produced in the world. FA can be used as a silicate precursor, and activated with an alkali-metal source to produce alkali-activated materials (AAMs). AAMs are more sustainable than other traditional products, as the use of waste for their production, reduces carbon emissions, and raw materials and energy consumption. This paper studies the properties, composition and reactivity of an Irish FA to establish its potential for the production of AAMs. The results clearly evidenced that the FA is reactive. It is ultrafine, it has a high specific surface area and is partially …
Maximising The Potential Use Of Ground Granulated Blast-Furnace Slag (Ggbs) In Cement: An Irish Investigation,
2020
School of Engineering, Schrodinger Building, University of Limerick, Limerick, Ireland
Maximising The Potential Use Of Ground Granulated Blast-Furnace Slag (Ggbs) In Cement: An Irish Investigation, Brendan Higgins, Michael Curran, John P. Spillane
Civil Engineering Research in Ireland 2020
The production of cement is estimated to account for around 8% of carbon dioxide (CO2) emissions worldwide, and the Irish construction industry yields fifteen million tonnes of CO2 annually. Measures must be employed to reduce these emissions by incorporating less CO2 intensive admixtures such as blast-furnace slag, however, the Irish construction industry can often be resistant to change. Therefore, this study aims to investigate the potential implementation of ground granulated blast-furnace slag (GGBS) into the use of cement in Ireland, on the basis of maximisation over optimisation. This research is based on the hypothesis that if GGBS produces drastically less …
Durability And Sustainability Of Pavement Quality Concrete In Airfields,
2020
Ecocem Ireland Limited, Block F1, Eastpoint Business Part, Dublin 3, D03 E0C0, Ireland
Durability And Sustainability Of Pavement Quality Concrete In Airfields, Aidan Fogarty, Mark Richardson
Civil Engineering Research in Ireland 2020
Direct emissions from the aviation industry accounts for 2% of global emissions. If global aviation was a country it would be in the top 10 emitters. The International Civil Aviation Organization (ICAO) forecasts that emissions could grow by a further 300-700% by 2050. In 2010 global cement manufacture released 3270 million metric tonnes of CO2 into our atmosphere. In 2020 that amount is estimated to be 4370 million metric tonnes of CO2. This will account for around 8% of global CO2. Replacing Portland cement with 70% GGBS in concrete reduces the carbon footprint associated with the cement content in concrete. …
Preliminary Investigation On The Use Of Dolomitic Quarry By-Product Powders In Grout For Self-Compacting Concrete Applications,
2020
School of Natural and Built Environment, Queens University Belfast, Belfast, Northern Ireland; Tracey Concrete Ltd, Old Rossorry, Sligo Road, Enniskillen BT74 7LF, Northern Ireland
Preliminary Investigation On The Use Of Dolomitic Quarry By-Product Powders In Grout For Self-Compacting Concrete Applications, Ahmed Abdalqader, Katrina Wilson, Neil Thornton, Kieran Mchugh, Mohammed Sonebi, Su Taylor
Civil Engineering Research in Ireland 2020
Self-compacting concrete (SCC) flows under its own weight without requiring external vibration for compaction. This is very useful in applications where normal vibrated concrete cannot be used such as narrow forms and reinforcement congested members. To attain the self-compacting property, it is required that the concrete have adequate viscosity, high deformability and high resistance to segregation. This is can be achieved by adding mineral admixtures (fillers) and/or viscosity modifying agents (VMAs). The former is the main practice in Europe and processed limestone powder is the most commonly used filler in the production of SCC. However, the quarrying process of the …
Thermodynamic Cement Hydration Modelling Using Hydcem,
2020
School of Surveying & Construction Management, Technological University Dublin, Bolton Street, Dublin 1
Thermodynamic Cement Hydration Modelling Using Hydcem, Niall Holmes, Denis Kelliher, Mark Tyrer
Civil Engineering Research in Ireland 2020
Thermodynamics have been successfully applied to the field of cement hydration science to predict the formation of phase assemblages and pore solution chemistry. For any cement hydration model to be accepted, it must provide accurate forecasts of which solids may form and how the cement will dissolve over time. This is particularly important for the ongoing development of new sustainable cements and understanding their hydration behaviour in service.
Predicting Mortar Compressive Strength Using Hydcem,
2020
School of Civil & Structural Engineering, Technological University Dublin, Ireland
Predicting Mortar Compressive Strength Using Hydcem, Ewoma Ogoro, Niall Holmes, Denis Kelliher, Mark Tyrer
Civil Engineering Research in Ireland 2020
The compressive strength of mortar is a significant property that will influence its performance in concrete or masonry. Being able to accurately model and predict the mortar compressive strength would be of great benefit to suppliers and end users alike that could possibly reduce the need for multiple physical testing.
Environmental Impact On Corrosion Rates Of Steel Piles Employed In Marine Environment,
2020
Malachy Walsh and Partners, Park House, Bessboro Rd, Mahon, Cork, Ireland; Department of Civil, Structural and Environmental Engineering, Cork Institute of Technology, Cork, Ireland
Environmental Impact On Corrosion Rates Of Steel Piles Employed In Marine Environment, Rebecca Galvin, Ciaran Hanley, Kieran Ruane, John J. Murphy, Vesna Jaksic
Civil Engineering Research in Ireland 2020
Steel piles employed in a marine environment will deteriorate over their lifetime owing to corrosive effects of the sea. The focus of this research are the causes, effects, and magnitude of the corrosion of steel piles, supporting an on shore jetty. The governing codes of practice in Ireland for designing steel piles are: (i) European Standard I.S. EN 1993-5 – Eurocode 3: Design of steel structures - Part 5: Piling, and (ii) I.S. EN 1993-1-1 – Eurocode 3: Design of steel structures - Part 1-1: General rules and rules for buildings. These codes are discussed, including all aspects of the …
Computational Modelling Of Next Generation Materials For Steel Catenary Risers In The Offshore Industry,
2020
School of Engineering, National University of Ireland, Galway, Galway, Ireland
Computational Modelling Of Next Generation Materials For Steel Catenary Risers In The Offshore Industry, Padraic O'Donoghue, Ronan Devaney, Seán B. Leen
Civil Engineering Research in Ireland 2020
Production risers are used to conduct oil or gas from the wellhead to an offshore production facility. Due to technical challenges with flexible marine pipe at large depths, there has been a move to steel catenary risers (SCRs) in recent years, due to the availability of high strength low alloy (HSLA) steels, such as bainitic X100. HSLA steels make SCRs a viable option for deep water due to the reduction in complexity and hence cost, compared to flexible pipes. However fatigue response is an important factor in their design, particularly in the vicinity of welded connections.
Fish Farm Monitoring For Blue Growth,
2020
Dynamical Systems and Risk Laboratory, School of Mechanical and Materials Engineering, University College Dublin
Fish Farm Monitoring For Blue Growth, Vikram Pakrashi, Wenliang Qiu, Michael O'Byrne, Paul Cahill, Basuraj Bhowmik, Bidisha Ghosh
Civil Engineering Research in Ireland 2020
Fish farms are structures which require unique monitoring. There are problems related to marine growth and overloading, along with breaks in nets. These can lead to damage in fish or attacks of worms, which in turn is responsible for loss of fish. Such loss can be extremely expensive.
Instrumented Trains As A Probe For Structural Health Monitoring Of Railway Infrastructure,
2020
Dynamical Systems and Risk Laboratory, School of Mechanical and Materials Engineering, University College Dublin
Instrumented Trains As A Probe For Structural Health Monitoring Of Railway Infrastructure, Vikram Pakrashi, Claire Mcgeown, Rohit Chawla, David Hester, Alexandra Micu, Eugene O'Brien
Civil Engineering Research in Ireland 2020
Railway infrastructure throughout the world is degrading and the Structural Health Monitoring (SHM) of this infrastructure can be effective. As a part of INTERREG project SIRMA, it is being investigated in instrumented trains can be used as a moving sensor for SHM of bridges and rail lines. Off-the-shelf calibrated sensors will be connected to trains and the instrumentation regime will be decided based on each SHM need. Output-only algorithms for anomaly detection and system identification will be implemented. Damage Sensitive Features (DSF) will be investigated to assess the best markers for the proposed SHM. A combined set of instrumentation and …
Implementation Of A Low-Cost Rtk Positioning System For Drone-Assisted Structural Inspections,
2020
Department of Civil Engineering, National University of Ireland Galway, Galway, Ireland
Implementation Of A Low-Cost Rtk Positioning System For Drone-Assisted Structural Inspections, Aidan Keaveney, Patrick Mcgetrick
Civil Engineering Research in Ireland 2020
Technological developments of unmanned aerial vehicles (UAVs) have been rapid and significant in recent years, and thus the scope of use has increased across a broad spectrum of industries, including the fields of structural and civil engineering. A key part of structural engineering is ensuring that a structure can be inspected during its service life to determine if there is any defect that could diminish its structural integrity. In practice, the procedures involved in such inspections to locate defects can be dangerous, time consuming and expensive to conduct. The aim of this study is to establish a system that is …
