Geotechnical Engineering Commons^™

Development Of Deep Site Specific And Reference Shear Wave Velocity Profiles In The Canterbury Plains, New Zealand, Michael Ryan Deschenes

Graduate Theses and Dissertations

Deep (typically >1000 m) shear wave velocity profiles were developed across the Canterbury basin at nine strong motion stations using a combination of active and passive surface wave methods and horizontal to vertical spectral ratio measurements. A multi-mode, multi-method joint inversion process, which included Rayleigh and Love wave dispersion and horizontal to vertical spectral ratio data, was used to estimate the shear wave velocity profiles at each site. A-priori geologic information was utilized in defining preliminary constraints on the complex geologic layering of the Canterbury basin. At sites where interbedded layers were present, velocity reversals were considered in the inversion. …

Geophysical Assessment Of Kinion Lake Dam, Tim Allen Moody

Graduate Theses and Dissertations

Geophysical methods including Capacitively-Coupled Resistivity (CCR), Electrical Resistivity Tomography/Imaging (ERT/ERI), Multichannel Analysis of Surface Waves (MASW) with Love and Rayleigh waves and a Full-Waveform Inversion (FWI) were performed on Kinion Lake Dam, an earth-filled embankment dam that has historically experienced significant seepage and internal erosion issues. Surveys were completed along the crest and downstream toe of the dam. Results from the surveys indicate that each method is capable of resolving the bedrock depth within 1-2 m of locations shown on previous drilling logs, though some discrepancies between the methods exist. A weathered bedrock layer is believed to have led to …

Engineering Applications Of Organic Surfactant Modified Bentonite In Sorptive Soil Barriers., Sadra Javadi

Electronic Theses and Dissertations

Earthen barriers such as CCLs and GCLs have been employed in geotechnical practices to provide a low permeability hydraulic barrier since long time ago. These types of barriers exhibited satisfactory performance for many applications such as landfills. The performance of low permeability barriers is based on the swelling potential of their component, which is mostly Na-bentonite, in contact with polar fluids such as water. However, the acceptable range of conductivity cannot be achieved by traditional earthen barriers when they are permeated by non-polar fluids such as gasoline. This phenomenon occurs due to the incompatibility of earthen barrier constituent with non-polar …

Cationic Surfactant Modification And Its Impact On The Engineering Behaviors Of Montmorillonite., Mohammad Ghavami

Electronic Theses and Dissertations

This study focuses on the microstructure of organoclays after organic surfactant modifications and the potential use in geoenvironmental engineering applications including waste containment in earthen barrier, rheological control agents for drilling fluid and soil stabilization. Organoclays, or clays modified by organic matters, are often synthesized by exchanging the naturally occurring interlayer inorganic cations (e.g., Na+, Ca²⁺) of the clay with organic cationic surfactants. In this research, montmorillonites intercalated with two quaternary ammonium surfactants, hexadecyltrimethylammonium (HDTMA+) and bis (hydrogenated tallow alkyl) dimethyl ammonium were used as the representative organo-rich, partitioning clays. The laboratory characterization techniques including XRD, TEM and …

Effect Of Particle Size Distribution And Packing Characteristics On Railroad Ballast Shear Strength: A Numerical Study Using The Discrete Element Method, S. M. Naziur Mahmud

Boise State University Theses and Dissertations

Railroad infrastructure plays a significant role in sustaining the economy of a country, and facilitates fast, safe and reliable transportation of passengers as well as commodities. Significant capital investments are required for the construction and maintenance of a railroad network that is structurally and functionally adequate. The ballast layer is one of the main structural components of a conventional rail track system, and comprises coarse-grained unbound particles, often as large as in size. The ballast as a load-bearing layer resists train-induced stresses through particle-particle interaction. Accordingly, particle-size distribution and packing characteristics are important factors that govern the mechanical behavior of …

Subsurface Characterization Of Flexible Pavements Constructed Over Expansive Soil Subgrades And Selection Of Suitable Rehabilitation Alternatives, Kazi Moinul Islam

Boise State University Theses and Dissertations

Expansive soils present significant engineering challenges, with annual costs associated with repairing structures constructed over expansive soils estimated to run into several billion dollars. Volume changes in expansive soil deposits induced by fluctuations in the moisture content can result in severe damage to overlying structures. A flexible pavement section near the Western Border of Idaho has experienced recurrent damage due to volume changes in the underlying expansive soil layer; traditional stabilization methods have provided partial success over the years. The main objective of this research effort was to characterize the problematic soil layer contributing to the recurrent pavement damage and …

Characterization Of Unknown Bridge Foundations, Saman Rashidyan

Civil Engineering ETDs

The National Bridge Inventory (NBI) recognized 86,133 bridges in the United States have no foundation data on record in 2003. It is evident that an unknown percentage of the 86,133 bridges identified by NBI with missing foundation data could also be highly vulnerable to scouring induced by water flow coupled with erodible soils. Conventional excavation, coring and boring excavations to identify unknown bridge foundation depths and types are deemed to be expensive, destructive, and limited in their application to the unknown foundation problem. Many surface and borehole nondestructive testing (NDT) technologies have been developed for this purpose. Three economical proven …

Effects Of Vegetation On Slope Stability: A Review, Roberto José Marín Sánchez, Juan Pablo Osorio

Articles

Slope stability is usually affected by factors that reduce soil strength and increase driving forces acting on the slope material, sometimes generating mass movements. Among these factors, vegetation has an important role related to hydrological (e.g. evapotranspiration and infiltration) and mechanical (e.g. tree surcharge and root reinforcement provided by trees) mechanisms. In this review, vegetation influences associated to slope stability are identified, describing the mechanisms involved in the occurrence of mass movements. Finally, the way these factors affect slope stability is explained according to soil properties, climatic conditions and environmental characteristics.

Fluid Isolator, Purdue Ect Team

ECT Fact Sheets Archive

The reliability of concrete infrastructure is vital to ensuring daily life, as well as commerce, can progress without interruption. From the pavement of interstate highways to the driveways and sidewalks in a local neighborhood, concrete is expensive to install and often even more expensive, and intrusive, when it needs to be replaced. Unfortunately, to maintain functionality in winter climates concrete is heavily exposed to deicing salts. This not only affects the roads, driveways, and sidewalks where salt is applied directly, but many other areas such as parking and residential garages where vehicles (and people) will track salt along with water …

Netpoint®, Purdue Ect Team

ECT Fact Sheets Archive

The vast majority of construction scheduling software uses a combination of spreadsheets and Gantt charts for developing and depicting Critical Path Method (CPM) schedules. While this paradigm works for the expert scheduler, it is not conducive to collaboration, and it is prohibitively difficult for non-scheduling experts to understand.

NetPoint® provides a dynamic, visual interface conducive to touch and gestural input. Activities are drawn directly on a time-scale and may be placed on the same row or arranged automatically using codes or the WBS. Such control of the presentation makes it easier to communicate the plan to any type of audience. …

Induced Earthquakes And Public Safety, Lyndsey L. Dickson

Civil Engineering Undergraduate Honors Theses

Like the number of earthquakes felt in Oklahoma, the number of media reports regarding large-magnitude earthquakes in Oklahoma has increased in recent years. News headlines that mention property damage and question who is responsible have sparked heated debated. In this document, a discussion is presented over the responsibility of engineers for the public’s safety in relation to earthquakes. Input from various groups is discussed, the action taken in Oklahoma is outlined, and ethical obligations presented by the American Society of Civil Engineers are considered. The United States Geological Survey (USGS) has reported a major grievance against building-code committees, but many …

Feasibility Of Additive Manufactured Materials For Use In Geotechnical Laboratory Testing Applications, Matthew P. Watters

Graduate Theses and Dissertations

The factors affecting the positive volumetric strain, or dilatancy, typically observed in response to shearing of a dense granular material have long been investigated; however, there still lacks a direct relationship between particle shapes and the resulting dilatant response. The typical Mohr-Coulomb strength parameter associated with granular material is known as the effective friction angle (φ’). For a dense granular assemblage, the peak friction angle has been described as being comprised of a dilatant friction angle (φ’d) component and a critical state friction angle (φ’cv) component. While the topic of dilatancy and factors (both inherent and extrinsic) affecting its behavior …

Development Of A Multiband Remote Sensing System For Determination Of Unsaturated Soil Properties, Cyrus D. Garner

Graduate Theses and Dissertations

A multiband system including active microwave sensing and visible-near infrared reflectance spectroscopy was developed to measure unsaturated soil properties in both field and laboratory environments. Remote measurements of soil volumetric water content (θv), soil water matric potential (ψ), and soil index properties (liquid limit [LL], plastic limit [PL], and clay fraction [CF]) were conducted. Field-based measurement of θv was conducted using a ground-based radar system and field measurements within 10 percentage points of measurements acquired with traditional sampling techniques were obtained. Laboratory-based, visible and near infrared spectroscopy was found to be capable of obtaining empirical, soil specific regression functions (partial …

Effectiveness Of Small Strain Shear Wave Velocity As A Property For Assessing Damage Associated With Alkali-Silica Reaction In Concrete, Dillon K. Self

Civil Engineering Undergraduate Honors Theses

This research paper details the monitoring of expansion and shear wave velocity for fifteen concrete prisms cast in accordance with ASTM C1293 utilizing five mix designs with varying levels of ASR reactivity. Jobe sand and sodium hydroxide pellets were added in various quantities to increase the reactivity of the prisms. Strain measurements of the prisms were taken according to ASTM C129 and the shear wave velocity of the prisms was measured using ASTM C215. These measurements were taken weekly, then monthly for over a year. It was determined that shear wave velocity of the prisms decrease linearly as strain in …

A Spreadsheet For Estimating Soil Water Characteristic Curves (Swcc), Ghada Ellithy

Publications

SWCC can be measured in the lab; however, due to the cost, time, and high variability in the results, empirical equations were developed using multiple regression approaches on databases consisting of a large number of measured SWCCs. The spreadsheet presented herein utilizes different methods that use basic soil properties, such as grain size distribution and Atterberg limits, to calculate the input parameters for van Genuchten and Fredlund and Xing equations. These parameters are required by numerical models, such as SEEP/W, to perform transient seepage analysis. The spreadsheet allows copying the generated curve data points as well as an input into …

Re-Evaluation Of Acceptance Testing Criteria For Structural Masonry Using The Prism Test Method, James Bristow

UNLV Theses, Dissertations, Professional Papers, and Capstones

The current acceptance criteria for structural masonry in accordance with International Building Code allows for the prism test method to be used. However, without a proper understanding of the effects of variable material properties such as individual masonry unit compressive strength and the various material moduli of elasticity, as well as the effect of field conditions on the unit’s performance, masonry prisms may “fail” to reach the design compressive strength (f’m).

By identifying causes of failure and evaluating the failure magnitude, it is concluded that when the masonry prism test method is utilized for acceptance testing of as-built masonry structures, …

Smartvid.Io, Purdue Ect Team

ECT Fact Sheets Archive

The collection, organization, and retrieval of industrial media is a pervasive challenge that is especially glaring for companies in the AEC industry. Construction projects often generate large volumes of pictures & videos from the field for tracking progress and communicating between engineers, contractors, and subcontractors. It is not uncommon for field personnel to capture hundreds of photos per week on any given jobsite.

Smartvid.io is a cloud-based software solution designed for the specific needs of industrial media. The application’s internal deep-learning engines, collectively nicknamed VINNIE (for ‘Very Intelligent Neural Network for Insight and Evaluation’), use speech and image recognition to …

Hillman Composite Beam (Hcb®), Purdue Ect Team

ECT Fact Sheets Archive

The Hillman-Composite Beam (HCB®), is an innovative structural member for use in highway and railroad bridges as well as marine facilities. The HCB is essentially a lightweight reinforced concrete beam strengthened and protected by a corrosion-resistant and resilient Fiberglass Reinforced Polymer (FRP) shell.

The beam is comprised of three main components, a concrete arch (compression reinforcement), an FRP bottom flange encapsulating steel strands tying the ends of the arch together (tension reinforcement) and the FRP shell. Galvanized Rebar “shear connectors” are used to make the beam composite with the concrete deck in the same manner as pre-stressed concrete beams.

The …

Industrial-Grade Monitoring Solution: Hoistcam, Purdue Ect Team

ECT Fact Sheets Archive

Safety and productivity are top priorities for contractors and industrial operations. Improving either makes a company more profitable and competitive. Technology advancements that can do both are important for every company to consider. HoistCam^TM industrial-grade video monitoring solutions can improve employees’ productivity and workplace safety in the construction industries. HoistCam also improves efficiency of operations and reduces job site accidents resulting in substantial cost savings to a contractor.

HoistCam™ is an integrated, wireless video system. The use of HoistCam eliminates blind lifts, blind spots and can share the live video with anyone, anywhere with solid security and easy control. …

Numerical And Experimental Studies On Coastal Marsh Erosion Under Hurricane Induced Wave And Current, Minhaz M. Shahriar

Doctoral Dissertations

Considering the past history and future risks of hurricanes in the USA, well understood storm protection plans are needed to shelter the important areas of the population and economy, especially within southeastern Louisiana. It is extensively assumed that marshes offer protection from hurricane though the degree of this protection is not well measured or understood due to the complex physics involved in this overall system. Moreover, marshes experience significant erosion while serving as a barrier for important areas. Consequently, a particular method to quantify the effects on marshes during a coastal hurricane period is necessary to mitigate major marsh loss. …