Geotechnical Engineering Commons^™

Geotechnical And Geothermal Properties Of Louisiana Coastal Sediments, Myriam Bou-Mekhayel

LSU New Orleans Theses and Dissertations

Land loss in South Louisiana is increasing at a fairly rapid rate. In an effort to reduce land loss and save the marshes of Louisiana, marsh creation projects have been proposed in carefully selected regions around the coast as part of the CPRA Coastal Master Plan 2017. Properties and characteristics of the soil obtained from soil borings were analyzed and used to determine the various design parameters that allow the marsh creation process to occur. Other properties that were taken into consideration for Louisiana coastal sediment are the geothermal properties.

This research analyses those different properties obtained from geotechnical reports …

Analytical And Numerical Modeling Of Cavity Expansion In Anisotropic Poroelastoplastic Soil, Kai Liu

LSU Doctoral Dissertations

Cavity expansion/contraction problems have attracted intensive attentions over the past several decades due to its versatile applications, such as the interpretation of pressuremeter/piezocone penetration testing results and the modelling of pile installation/tunnel excavation in civil engineering, and the prediction of critical mud pressure required to maintain the wellbore stability in petroleum engineering. Despite the fact that various types of constitutive models have been covered in the literature on this subject, the soils and/or rocks were usually treated as isotropic geomaterials.

In recognition of the above fact, this research makes a substantial extension of the fundamental cavity expansion theory by considering …

Point Cloud Technology For Analysis Of Existing Structures, Jacob Cano

Electronic Theses and Dissertations

For this thesis, a study was completed on two different structures on the UCF Orlando campus through the use of both structural plans and point cloud technology. The results sought to understand the viability of point cloud technology as an accurate tool for the static and dynamic modal analysis of existing structures. For static analysis, a portion of the framing of Spectrum Stadium was rendered, modeled, analyzed and compared to a previous case study. The results emphasized how different users can render dissimilar member sizes and lengths due to human judgment on point cloud visuals. The study also found that …

Tension Splitting Strength Of Bcsa Concrete Cylinders, Andrew Steven Deschenes

Civil Engineering Undergraduate Honors Theses

The focus of this research was to compare the tension splitting strength (TSS) of belitic calcium sufloaluminate (BCSA) cement concrete to tensile strength predicted by the American Concrete Institute (ACI) and to similarly proportioned portland cement (PC) concrete. BCSA is a rapid-setting cement with higher early strength, higher ettringite content, and lower calcium silicate hydrate (C-S-H) content than PC. PC and BCSA cement concrete cylinders were broken at different ages in both uniaxial compression and TSS. It was found that BCSA had a similar TSS to both the ACI prediction and PC TSS, but the results require further testing for …

A Unified Risk-Based Framework For Assessing Sustainability And Resiliency Of Civil Infrastructure, Thomas Adam Robbins

Boise State University Theses and Dissertations

As of February 2019, the National Aeronautics and Space Administration (NASA) has reported since 1880 the average global temperature has increased 1°C, with the warmest year on record being 2016. As the years continue to pass, it is becoming more evident that climate change is occurring, which is known to be a catalyst for climatic weather events. Statistically speaking, these events are more prevalent, and catastrophic exemplified as hurricanes, earthquakes, flooding, and fires. In addition to the increase of potentially catastrophic events, society as a whole has become more conscientious in the use and preservation of natural resources, waste generation, …

Urban Underground Infrastructure Monitoring Iot: The Path Loss Analysis, Abdul Salam, Syed Shah

Faculty Publications

The extra quantities of wastewater entering the pipes can cause backups that result in sanitary sewer overflows. Urban underground infrastructure monitoring is important for controlling the flow of extraneous water into the pipelines. By combining the wireless underground communications and sensor solutions, the urban underground IoT applications such as real time wastewater and storm water overflow monitoring can be developed. In this paper, the path loss analysis of wireless underground communications in urban underground IoT for wastewater monitoring has been presented. It has been shown that the communication range of up to 4 kilometers can be achieved from an underground …

Unl-Cc Outdoor Education Center Master Plan, Marie Wagner

Honors Program: Senior Projects (Public)

The following report contains the work done by the group Griswold Engineering in completion of the Senior Design requirements for Civil Engineering and the Honors Requirements of the Project Manager. As the project manager, my job was to organize the project as a whole and to work alongside the Structural Engineer on the project. One of the main problems to overcome was the division of labor amongst the group. The project was originally conceived as a group project with one project manager and five other students to serve as the project engineers in each subdiscipline. Since this group only had …

Seismic Performance Of Earth Slopes Subjected To Earthquake Mainshock – Aftershock Sequences, Alisha Khanal

Civil Engineering Theses

Mainshocks are usually followed by aftershocks. Aftershocks continue over a period of time with a decreasing frequency and there is not sufficient time for repair and retrofit between a mainshock – aftershock sequence. Typically, aftershocks are smaller in magnitude; however, aftershock ground motion characteristics such as the intensity and duration can be greater than the mainshock due to the changes in the earthquake mechanism and location with respect to the site. The seismic performance of slopes is typically evaluated based on the sliding displacement predicted to occur along a critical sliding surface. Various empirical models are available that predict sliding …

Experimental Investigation Of The Thermochemical Reduction Of Arsenite And Sulfate: Low Temperature Hydrothermal Copper, Nickel, And Cobalt Arsenide And Sulfide Ore Formation, Nicholas Allin

Graduate Theses & Non-Theses

Experiments were conducted to determine the relative rates of reduction of aqueous sulfate and aqueous arsenite (As(OH)₃,aq) using foils of copper, nickel, or cobalt as the reductant, at temperatures of 150ºC to 300ºC. At the highest temperature of 300°C, very limited sulfate reduction was observed with cobalt foil, but sulfate was reduced to sulfide by copper foil (precipitation of Cu₂S (chalcocite)) and partly reduced by nickel foil (precipitation of NiS₂ (vaesite) + NiSO₄·xH₂O). In the 300ºC arsenite reduction experiments, Cu₃As (domeykite), Ni₅As₂, or CoAs (langisite) …

Behavior Of Geothermal Energy Piles Embedded In Rock, Ehab Sabi

Civil and Environmental Engineering Theses and Dissertations

Geothermal energy piles are categorized as closed systems. Energy piles are a relatively new technology which couples the structural role of traditional pile foundations to that of heat exchangers to fulfill the required energy demand of buildings and infrastructures. These foundations are equipped with pipes embedded in the concrete forming the pile. While connected to a heat pump, the fluid circulating inside these pipes provides the exchange of heat with the ground for heating and cooling purposes. As the undisturbed temperature at the shallower depths of the ground stays comparatively constant the whole year, being warmer than the surrounding temperature …

Civil Engineering Design Of Cornhusker Council's Outdoor Education Center, Kelly Weiler

Honors Program: Senior Projects (Public)

A team of geotechnical, structural, hydraulic, environmental, and transportation experts collaborated to provide engineering solutions to the Cornhusker Council in an effort to solve the current problems facing their Outdoor Education Center. This results of this project provided the structural design of three bridges on the property, transportation plans for two parking lots and roadway design, geotechnical recommendations for soil testing and erosion prevention, and an environmental and hydraulic analysis of the property. A major challenge in the design of this project is the consideration of the dangers and regulations that accompany the floodway and floodplain regions on site. Various …

Monometric Mapping Flotation Process At Mikheevskiy Furniture Factory, Yu.G. Nikitina, I.P. Poyezhaev, G.A. Myrzabek, R.A. Musaev

Gorniy vestnik Uzbekistana

An integrated study on the sandstone hosted uranium deposits on the base of hydrodynamic simulation has been carried out to define optimal field opening schemes. The reservoir simulation and mass-transfer models for selected field opening schemes, ways of optimizing existing facilities and building of optimized scheme are the main results of this investigation.

Prospects Of Chatkalo-Kuramin's Diamond Presence Zones And Correlated Territories, Uzbekistan, A.M. Azizov, R.G. Yusupov, S.D. Fatkhullaev

Gorniy vestnik Uzbekistana

The Middle and South Tien Shan as orogenic regions with accompanying sharp changes in temperature and pressure (Koshmansai diatreme) are characterized by conditions for the formation of diamond manifestations. Prospects of Uzbekistan for radical manifestations of diamonds are assigned to the activated regions of the Archean (?) With manifestations of Lower Proterozoic eclogite-like formations with a complex of associated alpinotype ultrabasites, as well as alkaline intraplate basaltoids, K1.

Modeling Of Fluid Injection For Hydraulic Fracturing Initiation In Porous Rock Formations, Krishna Adhikari

LSU Master's Theses

Hydraulic fracturing has been widely opted in recent times to simulate the unconventional reservoirs and thus, has become key a subject of interest in petroleum engineering. The stress concentration around the borehole affects the breakdown pressure and fracture reopening pressure during the hydraulic fracturing treatments. Thus, the state of stress around borehole wall and its surrounding rocks due to instantaneous drilling and a fluid injection at borehole surface needs to be determined accurately to initiate the hydraulic fractures. This research intends to derive the analytical stress solution of inclined borehole subjected to time-dependent fluid injection and in-situ stress, verify the …

Seismic Landslide Hazard Mapping For Greater Vancouver, British Columbia, Ali Fallah Yeznabad, Sheri E. Molnar, Hesham M. El Naggar

Western Research Forum

The lower Mainland of southwest British Columbia (BC) hosts about 3.5 million people and significant infrastructures of national importance. Southwestern BC has the highest seismic risk in Canada with significant potential to cause earthquake-induced hazards including tsunamis, liquefaction and landslides. A Cascadia mega-thrust (M_W 9) earthquake is predicted to generate $75 billion Canadian dollars in losses. This damage can be resulted from ground shaking or its secondary phenomena like landslides; ground shaking during earthquakes may trigger landslides that can damage or destroy buildings, bury roads and highways and kill and injure people. In Canada, during the past century and …

Changes In Snow Phenology From 1979 To 2016 Over The Tianshan Mountains, Central Asia, Tao Yang, Qian Li, Sajjad Ahmad, Hongfei Zhou, Lanhai Li

Civil and Environmental Engineering and Construction Faculty Research

Snowmelt from the Tianshan Mountains (TS) is a major contributor to the water resources of the Central Asian region. Thus, changes in snow phenology over the TS have significant implications for regional water supplies and ecosystem services. However, the characteristics of changes in snow phenology and their influences on the climate are poorly understood throughout the entire TS due to the lack of in situ observations, limitations of optical remote sensing due to clouds, and decentralized political landscapes. Using passive microwave remote sensing snow data from 1979 to 2016 across the TS, this study investigates the spatiotemporal variations of snow …

Discussion: Effect Of Bentonite Slurry Pressure On Interface Friction Of Pipe Jacking, Ciaran Reilly, Trevor Orr

Articles

Pipe jacking is a technique used to construct tunnels by pushing prefabricated pipes through the ground from an entrance shaft to an exit shaft. This technique is referred as microtunneling in U.S. terminology, therefore, in the rest of the text, pipejacking and microtunneling will be used as having the same meaning. Pipe jacking is a more economical alternative to segmental lined tunnels. However, the main limitation of pipe jacking is the jacking distance, which is directly dependent on the friction between the pipe and the soil. Therefore, reducing the friction between the pipe and soil is a critical issue in …

Design And Evaluation Of Iot-Enabled Instrumentation For A Soil-Bentonite Slurry Trench Cutoff Wall, Jeffrey C. Evans, Alan Marchiori, Yadong Li

Faculty Journal Articles

In this work, we describe our approach and experiences bringing an instrumented soil-bentonite slurry trench cutoff wall into a modern IoT data collection and visualization pipeline. Soil-bentonite slurry trench cutoff walls have long been used to control ground water flow and contaminant transport. A Raspberry Pi computer on site periodically downloads the sensor data over a serial interface from an industrial datalogger and transmits the data wirelessly to a gateway computer located 1.3 km away using a reliable transmission protocol. The resulting time-series data is stored in a MongoDB database and data is visualized in real-time by a custom web …

Influence Of Limit Equilibrium Methods In The Design Of Contiguous Cantilever Sheet Pile Walls Through Reliability-Based Analysis, Alvaro J. Mattos, Juan Camilo Viviescas, Juan Pablo Osorio

Conference papers

In geotechnical engineering the design of bored- pile walls is commonly performed in terms of the embedment length (D) defined according to the limit equilibrium methods (also known as balance methods) formulated by Krey, Blum, Rowe, Hansen and the empirical method of Look in sandy soils. The limit equilibrium methods are calculations associated with the shape of the earth pressures distributions in the shaft, earth pressures theories, geotechnical properties and safety factors, while the empirical criteria establish that the relationship between embedment and the free height (H) is of the order of D/H = 1.5. These design methods are complemented …

Analysis Of The Pile Load Tests At The Us 68/Ky 80 Bridge Over Kentucky Lake, Edward Lawson

Theses and Dissertations--Civil Engineering

Large diameter piles are widely used as foundations to support buildings, bridges, and other structures. As a result, it is critical for the field to have an optimized approach for quality control and efficiency purposes to measure the suggested number of load tests and the required measured capacities driven piles. In this thesis, an analysis of a load test program designed for proposed bridge replacements at Kentucky Lake is performed. It includes a detailed site exploration study with in-situ and laboratory testing. The pile load test program included monitoring of a steel H-pile and steel open ended pipe pile during …