Environmental Engineering Commons^™

Experimental And Numerical Characterization Of Multiphase Subsurface Oil Release, Feng Gao

Dissertations

Subsurface oil release is commonly encountered in the natural environment and engineering applications and has received the substantial attention of researchers after the disastrous Deepwater Horizon Blowout oil spill in 2009. The main focus on the present research is to systematically study the hydrodynamics of underwater oil jet under a variety of conditions, including the effect of dispersant and different gas to oil ratios (GOR) by using experimental measurement as well as a Computational Fluid Dynamics (CFD) approach, from which the measured turbulent characteristics (e.g., velocity, turbulent kinetic energy, turbulence dissipation rate, etc.) of underwater oil jet are thoroughly examined …

2018 Fall Engr333 Project Final Report (Section A), 2018 Fall Engr333 Section A

ENGR 333

Calvin College currently spends 2.35 million dollars on energy every year. Physical Plant is under pressure to reduce the amount of energy that Calvin purchases from the electrical grid since the college is facing many budget constraints. In addition, President Le Roy signed the President’s Carbon Commitment to achieve carbon neutrality by 2057. With this need to save money on energy and reduce the college’s carbon footprint, the objective of this project was to determine the largest possible reduction in Calvin’s annual energy costs given a five-million-dollar investment in renewable energy.

2018 Fall Engr333 Project Final Report (Section B), Alexander Cooper, Katie Diekema, Grace Fasipe, Daniella Sugijanto, Alec Dejonge, Timothy Dykhuis, Breanna Kooiman, Samuel Olson, Brennan Boice, Tyler Gustman, Daniel Norton, Christopher Vanwhye, Robert Capozzoli, Jared Minderhoud, Clark Richeson, Nathan Schuyten

ENGR 333

What is the largest possible reduction in Calvin College’s annual energy costs from a $5M initial investment in renewable energy? Renewable energy systems are essential for Calvin College to reduce greenhouse gas emissions and achieve carbon neutrality to meet the Carbon Commitment that President Le Roy signed in December 2017. Also, a significant cost reduction could be a positive result of transitioning to renewable energy sources such as geothermal, wind, solar, and biomass. Four renewable energy sources were studied throughout the semester to determine a feasible renewable energy plan for Calvin with a $5M investment.

Spatial Exploration Of Trace Metals In Near-Surface Water And Soil In The Bolivian Altiplano, Lizzie Wilson

Civil and Environmental Engineering Theses and Dissertations

We analyzed soil and groundwater samples from the Bolivian Altiplano for trace metal concentrations, correlations and partitioning trends. Total digestion, sequential extraction and loss on ignition experiments were performed on soil samples. We ran aqueous samples on an ICP-MS. Results were analyzed to identify trace metal concentrations and find any significant correlations. We generated interpolated maps in ArcGIS to spatially analyze results. Results for elevated concentrations of interest were divided into sub-groups of organophilic metals, oxoanions and divalent metals and include vanadium, arsenic, selenium, zinc, nickel, lead, cobalt, uranium, copper and manganese. These elements are likely naturally sourced. We found …

Mechanisms Of Calcium Phosphate Mineralization On Biological Interfaces And Their Engineering Applications, Doyoon Kim

McKelvey School of Engineering Graduate Student Theses & Dissertations

All living organisms utilize phosphorus (P) as an essential component of their cell membranes, DNA and RNA, and adenosine triphosphate. Bones, in addition to bearing loads, play an important role in balancing P levels in our bodies. In bones, a network of collagen templates and calcium phosphate (CaP) nanocrystals builds hierarchical levels, from nano- to macroscale. Within this architecture, the thermodynamic properties of CaP minerals are influential. Despite the importance of nucleation, growth, and crystallization in collagen structures for tissue development, little kinetic study of these processes has been conducted due to the limited in situ techniques for monitoring these …

Epics Gaqt: Nandi Clean Kitchen Study, Yichen Fan

Engagement & Service-Learning Summit

No abstract provided.

2018 Fall Engr333 Poster, Alexander Cooper, Katie Diekema, Grace Fasipe, Daniella Sugijanto, Alec Dejonge, Timothy Dykhuis, Breanna Kooiman, Samuel Olson, Brennan Boice, Tyler Gustman, Daniel Norton, Christopher Vanwhye, Robert Capozzoli, Jared Minderhoud, Clark Richeson, Nathan Schuyten, 2018 Fall Engr333 Section A

ENGR 333

• $158k initial investment in Geothermal systems for various Calvin-owned residential buildings
• $3.34M initial investment in solar panels for Calvin’s rooftops
• The overall savings would be $233,850 per year
• Emissions would be reduced by 864 tons of CO2 emissions per year
• The recommended investment would be fully paid back in 11-15 years

College Of Engineering Senior Design Competition Fall 2018, University Of Nevada, Las Vegas

Fred and Harriet Cox Senior Design Competition Projects

Part of every UNLV engineering student’s academic experience, the senior design project stimulates engineering innovation and entrepreneurship. Each student in their senior year chooses, plans, designs, and prototypes a product in this required element of the curriculum. A capstone to the student’s educational career, the senior design project encourages the student to use everything learned in the engineering program to create a practical, real world solution to an engineering challenge. The senior design competition helps focus the senior students in increasing the quality and potential for commercial application for their design projects. Judges from local industry evaluate the projects on …

2018 Fall Engr333 Seminar Presentation, Rachel Evans, Alex Gross, Daniella Sugijanto, Jake Shaarda

ENGR 333

File for student presentation, given by students in the Fall 2018 class of ENGR333.

Community-Scale Water Treatment Systems In The Dominican Republic, Jonathan Racey, Annabelle Papai, Elise Fischer, Becca Johnson

Engagement & Service-Learning Summit

Engagement and Service-Learning Summit: Reciprocal and Sustainable Partnerships

Attributing Accelerated Increases In Salinity In The Mediterranean Coastal Zone To Climate Change And Seawater Desalination Brine And The Resultant Unsustainability Of Modern Desalination Technology, Brandon W. Harper

HCNSO Student Capstones

Anthropogenic climate change influences our oceans on a global scale and has brought about increased salinity levels in large areas of our oceans such as the North Atlantic (Dunbar 2009). Concentrations of large scale desalination plants around small bodies of water add to this pattern and have shown even larger increases in salinity due to desalination brine discharge (Purnama et al., 2005). Salinity profile data over time should show similar increases in salinity in the Mediterranean Sea due to climate change and localized data should show increased salinity due to brine discharge. This study aims to pinpoint the extent of …

Novel Materials Can Radically Improve Whole-System Environmental Impacts Of Additive Manufacturing, Jeremy Faludi, Cory M. Van Sice, Yuan Shi, Justin Bower, Owen M.K Brooks

Dartmouth Scholarship

Additive manufacturing often has higher environmental impacts per part than traditional manufacturing at scale, but new materials can enable more sustainable 3D printing. This study developed and tested novel materials for paste extrusion printing, and tested materials invented by others. Testing compared their whole-system environmental impacts to standard ABS extrusion, measured by life cycle assessment (LCA); testing also assessed material strength, printability, and cost. Materials were chosen for low print energy (chemical bonding, not melting), low toxicity, and circular life cycle (biodegradable, ideally sourced from waste biomaterial). Printing energy was reduced 75% (from 160 to 40 Wh/part), and embodied impacts …

Accumulation Of Lead By Biofilms In Drinking Water Distribution Systems, Kaleb Oren Belcher

Graduate Theses and Dissertations

Recent crises, such as the one in Flint, MI, indicate that lead exposure from drinking water is a major health concern in the United States. Over six million lead service lines are still in use in the United States, and a universal protocol to safely remove these lead service lines from drinking water distribution systems has not yet been established. This paper calls to attention the potential hazard that biofilms pose as a source of lead in distribution systems, even after the removal of lead pipes. This study used a simulated water distribution system containing a lead source pipe and …

Towards Environmentally Sustainable And Cost-Effective Food Distribution In The U.S., Jasmina Burek

Graduate Theses and Dissertations

Distribution centers (DCs) and supermarkets have an important role in food sustainability, but no previous research has accounted for their environmental impact. The purpose of this research was to assess environmental sustainability of grocery, perishables, and general merchandise DCs; to estimate food storing and retailing impact; and to provide cost-effective strategies to reduce DCs’ environmental impacts. The importance and relevance of the research is threefold: improving sustainability of DCs, food storing, and food retailing. The main method used in this research was the life cycle assessment (LCA) method. An initial study calculated environmental impacts of the Wal-Mart Stores, Inc. DCs, …

Assessing Biofiltration Without Ozonation For Removal Of Trihalomethane Precursors In Drinking Water At The Beaver Water District Drinking Water Treatment Plant, Sana Ajaz

Graduate Theses and Dissertations

Biofiltration without pre-ozonation has the capability to remove natural organic matter (NOM) fractions that serve as precursors of disinfection byproducts (DBPs), which include the four regulated trihalomethanes (THMs) and dichloroacetonitrile (DCAN). Rapid small-scale column tests (RSSCTs) and Pilot Plant filters operated at empty-bed contact times (EBCTs) of 4, 8, and 16 minutes were used to evaluate the performance of nutrient-amended (free ammonia and phosphorus) biofiltration for THM and DCAN precursor removal, as measured using formation potential (FP) tests. NOM surrogates – which include dissolved organic carbon (DOC), specific ultraviolet absorbance (SUVA254) and fluorescence-PARAFAC components – were measured weekly throughout the …

Midpoint And Endpoint Sustainability Assessment Of U.S. And China Manufacturing: A Comparative Mrio+Recipe Analysis, Mustafa Saber

Master's Theses

Manufacturing is among the most important industries for an economy, which creates value-added, fosters innovation, stimulates employment and economic growth. Therefore, manufacturing industries are crucial for a country’s sustainable development not only for economic reasons but also for social (.e.g. employment, tax, etc.) and environmental ones. Thus, manufacturing activities’ contribution to the economy is critically related with environmental and social impacts. Sustainable economic growth is essential and necessary for a country to provide all necessary goods and services to its growing population.

And, this is highly linke with the creation of new jobs and in this context, manufacturing jobs have …

Global Renewable And Nonrenewable Energy Use Impact Assessment Of U.S. Manufacturing: An Integrated Cradle-To-Gate Lca And Dea Approach, Bahadir Ezici

Master's Theses

In this thesis, U.S. manufacturing industries` global supply chain-linked energy use and economic output are investigated considering a total of 16 renewable and nonrenewable energy carriers. A multiregion input output (MRIO) framework is employed to conduct the global supply chain-linked energy use impact assessment. The study period was between 1995 and 2014 based on data availability. Thus, 20 MRIO models were developed. Each MRIO model consists of the 40 largest economies of the world and the rest of the world (ROW) as the 41st country. Each country’s economy was structured into 35 manufacturing and service industries based on the Worth …

Application Of Winslamm To Evaluate The Effect Of Green Infrastructure Implementation In Northern Utah, Rosa A. Fernández Velásquez

All Graduate Theses and Dissertations, Spring 1920 to Summer 2023

This study provides an evaluation of the performance of the WinSLAMM model in two cities of northern Utah, a region in which it has not been validated to date. Runoff volumes for a series of events from 2015 to 2017 were calculated for six study areas. These results were compared to model outputs to evaluate the prediction accuracy. The model performed poorly when default parameters where used, as expected. Thus, the calibration of runoff coefficient was done with local data. Total suspended solids (TSS), total phosphorus (TP) and total dissolved phosphorus (TDP) were also evaluated and calibrations were developed. The …

Enabling Robust Distributed Real-Time Hybrid Simulation Method And Expanding Its Applications In Floating Wind Turbine Systems, Mehmet Cinar

Masters Theses

Real-time hybrid simulation (RTHS), which integrates physical experiment and numerical simulation, plays an essential role in understanding the time-dependent behavior of structures when subject to hazardous loadings. On the other hand, RTHS might not yield accurate results for complex structural systems due to experimental and computational limitations. Distributed real-time hybrid simulation (dRTHS), which takes the advantage of distributed laboratory facilities using network communications, was proposed and proven to address some limitations in RTHS. During dRTHS, Internet delay due to the network communication is added to the actuator delay in RTHS, which may cause inaccurate results or even unstable tests. To …

Comparative Analysis Of Mosquito Trap Counts In The Peruvian Amazon: Effect Of Trap Type And Other Covariates On Counts And Diversity, George W. Peck, Fanny Castro-Llanos, Victor Lopez-Sifuentes, Erica Lindroth

Civil and Environmental Engineering Faculty Publications and Presentations

Efficient detection of multiple species of adult mosquitoes in various habitats using effective traps is a crucial 1st step in any disease prevention program. Novel trap types that target tropical vectors of human diseases require field testing in the habitat of the vector–disease system in question. This paper analyzes a series of mosquito trapping studies conducted at Mapacocha, San Juan Bautista District, Loreto, Peru, during August–September 2013 and April–May 2014. Six trap configurations were evaluated in forest and rural locations. Adult mosquito counts were analyzed using full Bayesian inference of multilevel generalized linear models and posterior probability point estimates of …