Construction Engineering and Management Commons^™

City Of Guadalupe Cultural Arts & Education Center Veterans Memorial Wall, Alejandra Arroyo Perez

Construction Management

As a student in Construction Management, the importance of firsthand experience in the construction industry should not be taken lightly. The responsibility of every construction manager is to learn how to take a project from concept to reality. The primary five elements of construction management entail project programming, design development, material specifications, estimating, and scheduling. This paper documents the construction management process related to a Veterans Memorial Wall. Through coordination with the project stakeholders (i.e. property owners, engineer consultants, material fabricators, and vendors) a fully immersive construction management experience is gained. One of the stakeholder requirements was to establish a …

Classification Des Sols Et Sélection Des Systèmes D’Étançonnement Pour L’Excavation Des Tranchées, Bertrand Galy, Denis Lebœuf, Omar Chaallal, André Lan

Rapports de recherche scientifique

Les travaux de fouilles en tranchée exposent les travailleurs à de nombreux risques. L’éboulement est le risque le plus grave et le plus fréquent présent pendant ces travaux, mais hélas, il est très souvent sous-estimé, alors qu’un éboulement mineur de moins d’un mètre cube de terre peut blesser mortellement un travailleur. Une analyse de 50 rapports d’accidents graves et mortels de la Commission des normes, de l’équité, de la santé et de la sécurité du travail (CNESST), survenus entre mai 1974 et juin 2017 lors de travaux d’excavation et de fouilles en tranchées, montre qu’il y a eu 48 décès …

Measurement Of Resilience Performance For Infrastructure Construction Project Delivery, Fei Han

Civil Engineering ETDs

In the past decade, infrastructure resilience in the U.S. has become critical due to increasing disruptions to the built environment and the resultant consequences on economic, social, and environmental goals. This attention to resilience research is drawn to investigating the ability of existing structures and facilities to resist and recover from natural and human-caused hazards. From a broader view, resilience also applies to processes, such as infrastructure project delivery processes. During these processes, a project often suffers inevitable threats and disruptions, which can significantly delay or derail the project if the process is not resilient.

This research aimed to conceptualize …

Application Of Using Fault Detection Techniques In Different Components In Power Systems, Mohamed Yahia Abd-Alkader, Ahmed M. Ebid Dr., Ibrahim Mahdi, Ibrahim Abdelrashed Nosseir

Future Engineering Journal

Throughout the years, Fault detection has been one of the most frequently discussed topics in the scientific community at present. Consequently, it has been extensively studied and focused on in recent years. This scientific paper presents some of this research, what they have reached, and the methods used for their studies. The literature review provides that these problems are not covered yet. It needs more works to develop fault detection techniques for better performance.

Analyzing Internships In Construction Management Based On Student/Industry Interest And Experience, Jared C. Gormley

Construction Management

The goal of this research paper is to analyze feedback from both student interns, and the industry on whether there is a disconnect between what each group feels makes an internship beneficial or not. Research was done evaluating current Construction Management students with internship experience at Cal Poly, while also evaluating companies that have internship programs. This paper will provide student interns with insight from industry members regarding internship programs, and it will provide companies with insight from students regarding their experiences within internship programs. Two surveys were sent out, one to all Construction Management Students at Cal Poly, and …

Building Services Engineering November/December 2021

Building Services Engineering

No abstract provided.

A Construction Workforce Training Partnership Between The State Of Wyoming, Industry, And University During Covid-19, Francois Jacobs, Renxiang Lu

Online Journal for Workforce Education and Development

Objective: To illustrate the development and implementation of a statewide construction workforce training program between the state, industry, and university during the COVID-19 pandemic. Background: Over the last 20 years, there has been a statewide construction workforce shortage, which not only creates an imbalance on the demands in this sector but impairs the profitability of Wyoming-based construction companies. Method: The team developed and implemented an online training platform, consisting of five modules, in support of training for construction companies and their workers across the state. Results: 149 successful learners received certificates of completion for the online training modules. The success …

Epics Lakota: Promoting Food Sovereignty On Pine Ridge Indian Reservation, Samantha Bijonowski, Kathleen Johnson, Jonathan Damon

Purdue Journal of Service-Learning and International Engagement

EPICS Team Lakota was started as a way for students to help promote food sovereignty and combat loss of cultural knowledge as felt by the residents of Pine Ridge Reservation, which is located in one of the poorest counties in the United States and is a food desert. In partnership with EPICS students at Oglala Lakota College (OLC) and South Dakota School of Mines (SDSM), students at Purdue came up with the idea of putting up a greenhouse on the Rapid City Campus of OLC. This greenhouse was meant not as a direct solution to food scarcity, but as a …

Performance-Based Building System Manufacturer Selection Decision Framework For Integration Into Total Cost Of Ownership Evaluations, Sarah L. Brown, Steven J. Schuldt, Michael N. Grussing, Louis B. Bartels, Michael A. Johnson, Justin D. Delorit

Faculty Publications

Facility managers are often faced with building system procurement or replacement decisions, requiring them to select a system from among competitive manufacturers. Total cost of ownership (TCO) criteria, informed by built assets in operation in the manager’s portfolio, provides some information to select the right asset manufacturer. However, managers must also consider technical performance to complete a more comprehensive analysis. Performance can be calculated using asset parameters like condition, age, and variation in condition to aid in TCO assessments. Leveraging past research and approaches, performance is calculated using an additive model that scales each parameter using a standard normalization technique …

The Professional Constructor, Full Issue, Volume 46, Number 02

The Professional Constructor

No abstract provided.

Arise (Certcoin)- Inspiring Demand For Sustainable Energy Skills, Barry Mcauley, Paul Mccormack, Andrew Hamilton, Eduardo Rebelo

Conference papers

The European AEC Sector now faces impending challenges over the next decade concerning escalating climate targets. To reach these targets, it vital that the green economy deliver a better-skilled workforce and develops new competencies and methods of working. Training in the domain of digital construction technologies and processes, such as Building Information Modelling (BIM), are now seen as essential upskilling vehicles that must be embraced if the sector is to transition towards a greener agenda. To assist in meeting these training needs a selection of partners from the BIM EPA will partake in the Horizon 2020 ARISE project, aiming to …

An Exploration Of Lean And Bim Synergies With A Focus On Smes In Construction, Barry Mcauley, Marina Andreou, Alan V. Hore, Avril Behan

Conference papers

Small and Medium Enterprises (SME) account for 99.7% of the Irish Construction Industry and contribute to 68% of all employment in the sector. These organisations now find themselves facing the challenge of returning to productive business post the Covid 19 shutdown. More than ever, SMEs must modernise and adapt their business models to embrace new ways of working, such as Lean Construction and Building Information Modelling (BIM), in the absence of clear business incentives. It has proved difficult to persuade SMEs to change their ways of working due to limited finances, internal resources and above all, the cultural shift required …

Introduction To Prefabrication And Automation In Construction, Luciana Debs, Jiansong Zhang, Yunfeng Chen

Bowen School of Construction Open Educational Resources

New developments and recent advances in construction methods have the potential to change the future of the architecture, engineering and construction industry. Prefabrication, along with modular construction, provides a safe and controlled environment for the production of building construction elements and raises the need for improved collaboration and coordination from design to manufacturing and from transportation to final assembly. Prefabrication also provides relief from the skilled construction labor shortage while opening up new opportunities for mass customization within the building industry. Prefabrication and modular construction automation are emerging expansion routes for the construction industry. In addition, integral to developing the …

Building Services Engineering September/October 2021

Building Services Engineering

No abstract provided.

Prefabrication In Buildings With Focus On Emerging Mep Rack Systems, Mark Daniels, M.G. Matt Syal

The Professional Constructor

The growth in technology and automation has influenced the construction industry to explore prefabrication alternatives in building design and construction. In addition, the shortage of skilled labor is accelerating the push for the adoption of prefabrication in building industry. This paper provides an overview of the present construction market and labor trends and summarizes various levels and categories of prefabrication. It then provides detailed information on an emerging MEP prefabricated solution known as the MEP rack systems. The implementation of the MEP rack systems is discussed with the help of a hospital case study project. It concludes with the discussion …

Case Study Of Using Unmanned Aircraft Systems To Support Bridge Inspections, Joseph M. Burgett, Gurcan Comert

The Professional Constructor

This paper presents the results of a case study conducted to evaluate the potential benefit of unmanned aircraft systems (UAS), commonly referred to as drones, as a tool to improve the bridge inspection workflow. The study conducted two experiments to determine how well deficiencies could be detected using a UAS. Both experiments were conducted using the same test bridge. The first experiment was carried out by the bridge inspection engineers (BIEs), who had previously inspected the bridge using traditional methods. They used the drone to search for inspection points identified in the inspection report. The second experiment was conducted by …

Stick Built Vs. Panelize Wall/Truss Framing For New Home Construction: A Time Study Labor Comparison., Eric A. Holt, Jim Anzlovar, Alexander Welsh

The Professional Constructor

Due to many trends in the construction industry (material cost increase, labor shortages, supply chain issues, pandemic, market demand outpacing supply), the homebuilding industry is looking for alternative ways to frame homes. In response to the National Housing Endowment (NHE) Request for Proposal, the researchers reviewed the literature on the housing market’s current state regarding the scale and scope of the skilled construction framers shortage and the current market share of single-family framing method; stick-built vs. panelization. Working with industry part ners, the team analyzed time studies for multiple new home builds. It was found that panelized wall framing systems …

Minority And Female Participation In Construction Industry Apprenticeship Programs, Richard Bruce, Aaron Sauer, Patrick Sells, Curtis Bradford

The Professional Constructor

According to the U.S. Bureau of Labor Statistic’s Current Population Survey, nearly 90 percent of the 10.7 million people employed in the construction industry are white males (2021). This statistic will remain unchanged unless more minorities and females are recruited into the industry. For craft workers, a primary recruitment mechanism is the registered apprenticeship program. This study analyzes the U.S. Department of Labor’s Registered Apprenticeship Database (RAPIDs) from 2000 to 2019 to identify trends for new apprentices. The study found that there was no change in the proportion of new female apprentices in the previous 20 years and no change …

Evaluation Of In-Cab Air Quality For Nonroad Diesel Construction Equipment, Phil Lewis, Sherif El Khouly, Adam Mayer, Jeremy Johnson

The Professional Constructor

Previous research indicates that air quality near the cabs of nonroad diesel equipment may exceed recommended exposure limits for certain pollutants. The objective of this case study was to collect and analyze air pollutant data near the cabs of nonroad diesel equipment while performing real world activities. Using state-of-the-art instrumentation, the research team conducted 24 tests on nine different items of nonroad equipment. The team collected data related to pollutant concentrations of carbon monoxide, carbon dioxide, nitric oxide, nitrogen dioxide, particulate matter, and black carbon. Average concentrations of carbon monoxide and nitric oxide did not exceed published exposure limits on …

Assessment Of Key Imperatives For Enhancing Precast Adoptability In Egypt, Mostafa Sameh

Theses and Dissertations

Precast Concrete’s modular application concept is a major construction method that has been used historically seen in various shapes, forms, and with a wide range of constituents. Examples include Ancient Egypt and China among several impressive structures in old civilizations. The major advantages of precast concrete lie in its adaptability, resilience, and versatility which makes precast concrete one of the most agile building materials. Precast concrete as we know it today has been introduced to our markets over the past several decades. Having similar advantages to that of old precast building methods, the road has been paved for wider use …