Construction Engineering and Management Commons^™

Comparing The Stiffness Of Cold In-Place Recycled Asphalt Pavement To Hot Mix Asphalt: Determining The Reproducibility Of The Stiffness Rebound Test, Tanner Turben

Civil Engineering Undergraduate Honors Theses

The Stiffness Raveling Mechanism Test (SRMT) was originally developed as an indirect measure of pavement stiffness to determine a pavement’s tendency to ravel, a type of damage. Regarding rehabilitation of existing roadways by Full Depth Reclamation (FDR) Cold In-Place Recycling (CIR), concern of field repeatability was expressed (Hill & Braham, 2016).

An analysis of lab-compacted samples of CIR and Hot Mix Asphalt (HMA) was performed to determine if the results could be reproduced between CIR and HMA. Additionally, the experiment observed the effects of percent air voids, temperature, and moisture conditioning on CIR and HMA. Three samples were prepared for …

Electrochromic Windows: Return On Investment Analysis, Thomas Michael Caprio

Construction Management

In recent years, sustainability in construction has become a topic of undeniable interest. With sustainability certifications becoming more prominent and desirable, members of the construction industry have begun to seek alternatives for standard systems to keep up with market trends. One of the main issues that the construction industry faces is accessibility of technology. While there are new products and technologies being released frequently, members of the construction industry lack knowledge on the specific details and implications of working with newer systems. One piece of technology that was recently introduced is electrochromic glass, or smart glass. Electrochromic windows analyze sunlight …

Installation Of Electrical System For Paso Robles Police Department, Peter D. Strykers, Jacob M. Studebaker

Construction Management

This paper outlines the process that Peter Strykers and Jacob Studebaker went through to set up the lighting and power system for the Paso Robles Police Department gun range located off highway 46. Before our installation, the gun range had zero lighting so the officers could not use it after sunset. We allowed the officers to light the gun range with outdoor LED lights, light up both the storage units on site, and have access to multiple outlets inside and out of the storage units. The power source that the electrical system runs on comes from a Kubota generator because …

Precast Concrete Manufacturing Business Plan, John F. Will Jr.

Construction Management

The Central Coast of California has been under development since the Great Recession of 2008. Throughout this development, there has been an exceedingly high demand for precast concrete products, specifically in the civil sector of the construction industry. These products are being utilized by more and more by contractors around the world. This demand has emerged from the lack of concrete product manufacturers in this region of California. This project introduces a business plan for a new precast concrete product manufacturer by the name of J.W. Concrete Products LLC. The objective of this business plan is to reflect the benefits …

Paso Robles Police Department Shooting Range Shade Structure, Evan Marshall Cogswell

Construction Management

The Paso Robles Police Department has been a partner for multiple senior projects working to develop improvements for their shooting range. The shooting range is used extensively by officers year-round, with the climate being hot in the summer and rainy in the winter. We wanted to provide a shade structure located between the two shipping containers used for storage so that the officers would have a sheltered place to provide instruction, clean their weapons, and rest in between rounds on the range. This type of project was new to all three of us in the group – Parker Smith, Kevin …

Installation Of Electrical System For Paso Robles Police Department, Jacob M. Studebaker, Peter D. Strykers

Construction Management

This paper outlines the process that Peter Strykers and Jacob Studebaker went through to set up the lighting and power system for the Paso Robles Police Department gun range located off highway 46. Before our installation, the gun range had zero lighting so the officers could not use it after sunset. We allowed the officers to light the gun range with outdoor LED lights, light up both the storage units on site, and have access to multiple outlets inside and out of the storage units. The power source that the electrical system runs on comes from a Kubota generator because …

Quantifying Responsiveness In The Vaccine Industry To Evaluate And Improve Pandemic Response, Connor Hill

Theses and Dissertations

In the wake of the pandemic Severe Acute Respiratory Syndrome Coronavirus 2 (SARS-CoV-2) we can look at many aspects of the global response, including social, scientific, and governmental. Current research in the areas of vaccine development and manufacturing find the process of developing a new vaccine takes an especially long time and is unresponsive. Understanding the factors that influence responsiveness can help organizations be better prepared to address the needs of society should another pandemic strike. Responsiveness can be linked to product, process, and volume. The vaccine development and manufacturing process historically takes years to reach distribution for public use. …

Using Cost Simulation And Computer Vision To Inform Probabilistic Cost Estimates, Shu Jing Ding

Department of Construction Engineering and Management: Dissertations, Theses, and Student Research

Cost estimating is a critical task in the construction process. Building cost estimates using historical data from previously performed projects have long been recognized as one of the better methods to generate precise construction bids. However, the cost and productivity data are typically gathered at the summary level for cost-control purposes. The possible ranges of production rates and costs associated with the construction activities lack accuracy and comprehensiveness. In turn, the robustness of cost estimates is minimal. Thus, this study proposes exploring a range of cost and productivity data to better inform potential outcomes of cost estimates by using probabilistic …

A Case Study Of Protecting Bridges Against Overheight Vehicles, Aly Mousaad Aly, Marc Hoffmann

Faculty Publications

Most transportation departments have recognized and developed procedures to address the ever-increasing weights of trucks traveling on bridges in service today. Transportation agencies also recognize the issues with overheight vehicles’ collisions with bridges, but few stakeholders have definitive countermeasures. Bridges are becoming more vulnerable to collisions from overheight vehicles. The exact response under lateral impact force is difficult to predict. In this paper, nonlinear impact analysis shows that the degree of deformation recorded through the modeling of the unprotected vehicle-girder model provides realistic results compared to the observation from the US-61 bridge overheight vehicle impact. The predicted displacements are 0.229 …

Subdivision Site Design In Antwerp Township, Alec Denbraber

Honors Theses

Design and development of a subdivision on an empty plot of land off Red Arrow Highway in Antwerp Township, MI.

Subdivision Site Design In Antwerp Township, Peyton Smith

Honors Theses

Design and development of a subdivision on an empty plot of land off Red Arrow Highway in Antwerp Township, MI.

Analyzing Resource Allocation And Levelling In Construction Projects, Mohamed Eizeldin, Mohamed Hussein Hegazy, Ahmed Alhady, Shahir Ashraf

Civil Engineering

Project scheduling has been crucial in any construction project since applying poor scheduling may lead to cost overruns and delays. The most commonly used technique for scheduling is the critical path method (CPM). As CPM neglects the availability of resources and assumes only time as a constrain; therefore, the resource allocation problem (RAP) technique is introduced. RAP appears when the number of resources required exceeds the number of resources available. Moreover, as a result of solving the RAP, another problem will occur known as the resource leveling problem (RLP). RLP lead to lots of hiring and firing of laborers. Researchers …

Optimizing The Self-Healing Efficiency Of Hydrogel Encapsulated Bacteria In Concrete, Ricardo Hungria

LSU Master's Theses

Calcium carbonate precipitation through microbial means is a promising pathway for concrete self-healing technologies, mainly for its microcrack sealing attributes. The main goal of this project was to study and optimize the crack healing efficiency of hydrogel encapsulated bacteria in concrete. To achieve this purpose, Bacillus pseudiformus was implemented as the bacteria strain at a concentration of 10⁸ cells/ml. This bacterium strain along with yeast extract was combined along with three different mineral precursors corresponding to magnesium acetate, calcium lactate, and sodium lactate. All these three precursors were evaluated at two concentrations (67.76 mM/l and 75 mM/l). For each …

The Professional Constructor, Full Issue, Volume 47, Number 01

The Professional Constructor

No abstract provided.

Reducing Early-Age Shrinkage Cracks Of Bridge Decks And Rails, Soumitra Das, George Morcous, Jiong Hu

UNL Student Research Days Posters, Graduate

Early-age shrinkage cracking of concrete bridge decks and rails accelerates the penetration of water and chemicals which leads to reinforcement corrosion, delamination, and eventually spalling. All this results in shorter service life, road closure, and costly repair. Development of Low-cement concrete(LCC) mix to reduce early age shrinkage crack through aggregate grading optimization was done in this research work. This approach also reduces concrete cost ($15-$20/cyd) (15–25%) and its carbon footprint (≈15%).

Building Services Engineering March/April 2022

Building Services Engineering

No abstract provided.

Impacts Of Pandemic-Induced Material Price Escalation On Construction Estimation And Bidding, Chancellor G. Giessinger

Construction Management

The COVID-19 pandemic introduced new severe supply chain bottlenecks in the construction industry. These bottlenecks reduced the availability of a wide variety of critical construction materials, which created a scarcity that has raised material prices at an unprecedented rate and extended lead times for some materials by months. This poses new challenges for contractors with pressure from owners to deliver ongoing contracts with fixed, pre-pandemic contract pricing and for estimators seeking to bid new projects with unforeseeable future material pricing. The objective of this research to focus on contractors operating within the state of California and their primary challenges in …

Design And Evaluation Of A Prototype Low-Damage Beam-Column Connection For Mass Timber Moment Frames, Samuel D. Richmann

Civil and Environmental Engineering Master's Project Reports

A moment-resisting, beam-column connection for mass timber moment frames was developed, designed and tested. The design was intended to limit damage to the timber members by creation of a ductile failure mechanism in steel U-shaped flexural plates (UFPs). Using design equations developed by previous research on UFPs by Baird, et al. (2014) as well as accepted design practices from the NDS and AISC, the components were sized to eliminate failure in the timber. The connection was tested using a quasi-static lateral displacement method following the procedure outlined in section K2.4b of AISC 341-16. A vertical load was placed on the …

Life Cycle Integration Of Building Information Modeling In Infrastructure Projects, Xingzhou Guo, Chi Tian, Jinwu Xiao, Yunfeng Chen, Jiansong Zhang

Purdue Road School

No abstract provided.

Cognitive Attention And Its Application In Countermeasures On A Curve Section, Hongyue Wu, Yunfeng Chen, Junan Shen, Weinan Gao, Mohammad Ahad, Osahon Iroghama

Purdue Road School

No abstract provided.