Construction Engineering and Management Commons^™

Collision Hazard Prevention And Notification For Construction Worker Safety Using Audio Surveillance, Kehinde Elelu

All Dissertations

The construction industry faces significant safety challenges, with collision hazards ranking as the second highest cause of annual fatalities and injuries in the United States, as reported by the Occupational Safety and Health Administration (OSHA). Current collision detection methods predominantly rely on proximity technologies, which necessitate costly and complex installations on each construction equipment piece. Furthermore, auditory situational awareness declines among workers due to hearing loss and intricate construction noises, which further heightens collision risks. This research introduces an innovative, low-cost, audio-based collision prevention technology aimed at enhancing auditory situational awareness for construction workers exposed to high noise levels. The …

Operation Webs - Tiny Home On Wheels: Quantity Take-Off, Estimate, And Site Logistics, Brendan Moynahan

Construction Management

The objective of this paper is to highlight and discuss the process of performing quantity take-offs, completing an estimate, and creating a site logistics plan for the Operation WEBS (Women Empowered Build Strong) Tiny Home on Wheels project performed at the Paso Robles State Fair. This project is a part of the interdisciplinary project based senior project completed by California Polytechnic State University, San Luis Obispo, College of Architecture and Environmental Design students Brendan Moynahan and Jake Torres. Brendan Moynahan performed the deliverables covered in this paper while Jake Torres completed his own deliverables for another paper. Our individual responsibilities …

The Viability Of Styrofoam Beads In Concrete Mixtures, Colin Edward Sykes

Construction Management

This experiment revolved around the idea that an aggregate replacement in a concrete mixture could not only maintain its structural integrity but increase its sustainability as well. This idea was formulated into the experiment of embedding Styrofoam beads into concrete. The outcome of this experiment showed the compressive strength of the concrete increased the greatest with the substitution of Styrofoam beads for fine aggregate up to 20%. This 20% Styrofoam replacement mixture exhibited an 189% increase in compressive strength when compared to the control group in the third week of testing. In addition to this impressive compressive strength, the weight …

The Use Of Augmented Reality (Ar) Technology In Construction, Luke Zamlich

Construction Management

Building Information Modeling (BIM) has revolutionized construction by replacing traditional paper-based methods with advanced software, improving data management and project workflows. However, as projects become more complex, challenges like communication gaps and design errors persist, often leading to cost overruns. Augmented Reality (AR) is an emerging technology that could address some of these issues by enhancing real-time visualization and collaboration, helping avoid costly rework. Despite its potential, AR remains underutilized in the construction industry. This paper explores the feasibility of integrating AR into modern construction workflows to complement BIM models and improve on-site project management. A literature review highlights AR’s …

Building Safely: How Spanish Specific Safety Can Impact Job Sites, Luis D. Aguilar Montano

Construction Management

This project explores how Spanish Specific Safety Training is being approached in the construction industry, with an attempt to identify some possible issues associated with language barriers and accessibility to these trainings. This research involved data collection through thirty analytical surveys, in addition to conducting three semi-structured interviews with construction workers and supervisors. The focus of the data collection was to gain insights into several key areas, including training accessibility, workplace injuries, language barriers, and worker comfort. The survey results indicated strong support for Spanish-language safety training, with respondents recognizing its potential to improve safety and overall worker comfort. Many …

A Comparison Of Mass Timber Perceptions Among Construction Professionals Over Time, Josh A. Higginson

Construction Management

Mass timber is a relatively new construction building material consisting of large-scale engineered wood products such as cross-laminated timber (CLT) and glue-laminated timber (glulam). It is gaining attention as a sustainable alternative to traditional steel and concrete, offering benefits such as reduced carbon emissions and enhanced aesthetic appeal. Despite being used on notable projects recently, it is not yet widely accepted by the industry as a whole. This study investigates the evolving awareness, benefits, and challenges associated with mass timber construction among U.S. construction professionals. Through a survey of over 100 construction practitioners, primarily from Cal Poly’s Construction Management Advisory …

Caed Shop Entrance Wall Redesign, Theodore Haoran Khuong, Joelle Schalesky, Ellen Elizabeth Untalan, Katherine Evalyn Timbes

Construction Management

This paper details the preconstruction process involving the replacement and redesign of the north wall at the CAED Support Shop at Cal Poly, San Luis Obispo. Accomplished by an interdisciplinary team of Architectural Engineering and Construction Management students, this project explores the requirements and procedures of generating a project proposal to submit to Cal Poly Facilities Management. The project, initiated in the fall of 2024, aimed to redesign the wall aligned with the adjacent Engineering West building and replace it with a CMU low lift grouted wall. The CAED Support Shop is offered as a resource to all CAED students …

Lab Exercise For Cm 114: Static Bending Of Timber And Its Alternatives, Samuel E. Arreola

Construction Management

This lab exercise investigates the static bending behavior of various structural materials. In this lab, the primary objective is to evaluate and compare the stress, strain, and deflection of 2” x 10” lumber, TJI joists, LVL beams, and steel studs under controlled loading conditions. This lab will require the calculation of cross-sectional properties, applying incremental loads until failure, and recording all corresponding deflection values. Material failure was visually documented using photographs to understand structural performance under the load. By using structural engineering principles and the formulas for stress and strain, the completion of this lab exercise provides a comprehensive analysis …

Cal Poly Gateway Decathlon Deliverable 3: Cost Estimate Development, Ruby Maria Sierra

Construction Management

The Gateway Decathlon is a global competition where university teams design, build, and operate sustainable, energy-efficient, and cost-effective homes using advanced technologies and materials. Teams create homes with renewable energy, energy-efficient systems, and sustainable materials. The competition evaluates design, energy efficiency, sustainability, and market viability. Currently, teams are working on Deliverable 3, which includes technical documentation, architectural plans, energy simulations, and cost analyses to ensure project feasibility. This deliverable bridges the design and construction phases and sets the foundation for building and operating the homes, helping to advance sustainable building practices and energy-efficient solutions.

Assessing The Critical Factors Influencing Worker Safety In Roadway Work Zones, Bahaa Chammout, Muaz O. Ahmed, Islam El-Adaway

Civil, Architectural and Environmental Engineering Faculty Research & Creative Works

Ongoing roadway construction and maintenance activities are essential for sustaining and improving infrastructure. Nonetheless, work zones in the United States continue to experience concerning frequencies of occupational and traffic accidents. Previous research highlighted multiple factors influencing work zone safety, yet their relative impact and importance remain unclear. This study addresses this gap following a multistep methodology. First, 32 safety factors were identified through an extensive literature review in a previous study. Second, a survey was administered among 298 professionals from diverse backgrounds, with an average of 17.75 years of construction experience and 13.78 years of work zone experience, to assess …

Beyond The Waterfall: A Review Of Project Management Methodologies In Stem, Yessenia Henriquez

Undergraduate Research Symposium Posters

Project management has been exercised from history's early stages to concurrent practices today. It has evolved from the early stages of the Gantt chart and five primary principles to well-renowned project management methodologies such as Waterfall and Agile. This literature review focuses on comprehending four project management methodologies (Waterfall, Agile, Kanban, and Scrum), learning their criteria and frameworks, and their application in a specific STEM environment when applicable. This work reviews the recent research literature about these four methods. An overview of project management certificates and guidelines is covered as well. Waterfall is known to be a traditional method, having …

Next Generation Permeable Pavement For Enhanced Durability And Functionality, S M Tanvir

LSU Master's Theses

Porous Asphalt Concrete (PAC), also known as Open-Graded Friction Course (OGFC), is known for its high permeability, which provides benefits such as enhanced rainwater drainage, improved skid resistance, and reduced hydroplaning risks. These characteristics are due to its high air void content, allowing water to flow through the pavement and reducing splash, spray, and noise compared to conventional asphalt mixes. However, this high air void content also contributes to durability concerns, such as raveling, stripping, and clogging, which can reduce service life and increase costs, making OGFC more expensive than conventional asphalt mixtures.

This research focuses on identifying the failure …

Development Of Machine Learning-Based Tool For Prediction Of Long-Term Field Performance Of Asphalt Concrete Overlays In A Hot And Humid Climate, Elise Mansour

LSU Doctoral Dissertations

The performance of pavement plays a critical role in Maintenance, Rehabilitation and Reconstruction (MR&R) for highway agencies. Reliable and accurate estimation of pavement performance can be instrumental in prioritization of the limited resources and funding for highway agencies. The latter requires robust prediction models that can handle large-scale, real-world data and can forecast pavement performance in the long run. Unfortunately, the traditional performance prediction models have raised concerns regarding their efficiency and accuracy. It is because these models were based on a limited number of explanatory variables, were not up-to-date and were designed for forecasting short-term (up to five years) …

Roaded Catchments In Wa, Department Of Primary Industries And Regional Development, Western Australia

Natural resources factsheets

Roaded catchments are earthwork structures designed to increase the amount of run-off from the catchment above a receiving farm dam.

Roaded catchments are lined with clay and compacted to make a smooth surface that reduces infiltration and increases run-off. Roaded catchments should discharge into a silt trap and then into a dam (excavated earth tank). This combined structure should be fenced to exclude livestock.

The Department of Primary Industries and Regional Development recommends that roaded catchments are part of an integrated water and salinity management program.

The information in this page is only a guide – seek expert advice before …

Circular Economy Integration In Leed: A Decade Of Materials And Resources Credit Achievement Patterns, Radwa Eissa, Islam H. El-Adaway

Civil, Architectural and Environmental Engineering Faculty Research & Creative Works

Previous studies consistently label the Materials and Resources (MR) credit category of the Leadership in Energy and Environmental Design (LEED) as the least attainable, despite its critical role in transitioning to a circular economy (CE). To this end, a long-standing gap exists in understanding the MR credit achievement, especially in LEED v4, which has been in use for nearly over a decade. This paper evaluates the level of CE integration in LEED v4 across 971 US-based certified projects. The study comprehensively analyzed the projects achievement patterns of the five MR credits: Building Life Cycle Impact Reduction (C1), Environmental Product Declarations …

Development Of Multifunctional Wood Composites With Integrated Phase Change Materials For Enhanced Thermal Management, Self-Healing, And Sustainability., Emmanuel Igbokwe

LSU Master's Theses

Abstract

This study focused on incorporating self-healing, flame retardancy, and energy harvesting capabilities into the wood composite to contribute to more sustainable and energy-efficient building practices. Oriented strand board has been widely used as sheath for roofing or dry walls in residential buildings. Residential buildings account for a large portion of energy consumption. Therefore, an oriented strand board with energy harvesting capability is highly desired. Additionally, flame retardancy and damage self-healing and end-of-life recycling are also critical features for buildings.

In this study, we prepared a novel oriented strand board by constructing sandwich structures. The face sheets of the sandwich …

Building Services Engineering November/December 2024

Building Services Engineering

No abstract provided.

Treatment Methods Of Unstable Expansive Soil Slope Excavation In Overlying Rock Layer In Alpine Region, Shi Xiaobo, Cui Guangyan, Mou Chao, Wen Ye, Xie Feng, Fu Xiaoyang

Journal of China & Foreign Highway

To deeply study the treatment method for instability of highway cutting slope under the condition of expansive soil overlying rock layer in an alpine region，the comprehensive treatment method of unstable slope under this bad geology was put forward based on the unstable slope project of Zhangbei‒Shangyi Expressway.The governance protection structure consisted of a rigid protection system，drainage system，thermal insulation system，flexible protection system，and waterproof system.The rigid protection system was an anti-slide pile setting at the height of 1/3 of the first grade slope，of which parameters were calculated by cutting the slope of the rock layer in the unstable area to reduce the …

Treatment And Measurement Of Water Inrush During Highway Tunnel Construction, Wang C Haojie, Feng Zhihua, Fan Haobo

Journal of China & Foreign Highway

As a special geological condition of highway tunnels，water inrush will cause difficulties in engineering construction technology and management.Unnecessary disputes and management difficulties will emerge when different construction units hold different views about the treatment measures of water inrush，which leads to distributed provisions in the specification and a long treatment period.In view of key problems about the water inrush during highway tunnel construction，including water inrush treatment concept，investigation and estimation，measurement and pricing，and on-site confirmation，this paper systematically sorted out the current regulations and other guiding documents and investigated the treatment methods of tunnel water inrush and reverse slope pumping in China ’s highway …

Review Of Evaluation Methods For Mixing Workability Of Asphalt Mixture, Dong Fuqiang, Zu Yuanzhe, Yu Xin, Chen Bei, Liu Lin

Journal of China & Foreign Highway

To clarify the evaluation methods an d research status of mixing workability of asphalt mixture， by consulting relevant research literature in China and abroad and analyzing different evaluation methods，indexes，and research findings of the workability of asphalt mixture，the applicability and evaluation effects of different workability evaluation methods were systematically summarized，and the comparative analysis and comprehensive review were made on the main influencing factors of the mixing workability.The results show that in most evaluation methods for the mixing workability of asphalt mixture，corresponding indexes are constructed to quantitatively evaluate the workability by quantifying the resistance or energy consumption in the mixing process.Besides，in some …