Green Building Policy, School Performance, And Educational Leaders’ Perspectives In Usa,
2011
California Polytechnic State University - San Luis Obispo
Green Building Policy, School Performance, And Educational Leaders’ Perspectives In Usa, Scott D. Kelting, Michael Montoya
Construction Management
The movement to construct high performance “green” buildings has had unprecedented market growth and continues to become mainstream practice for constructing schools in the United States. Green schools have economic, environmental and health benefits. Research provides information on the use of increased student performance found in green schools to justify building schools to a higher standard of indoor environment quality. There is clear and compelling evidence that schools currently built to specific green standards of indoor environmental quality, (e.g. thermal comfort, indoor air quality, acoustics and lighting,) result in healthier and more productive students and teachers. Current green building policies …
Identification Of Risk Factors Associated With Motorcycle-Related Fatalities In Ohio,
2011
University of Dayton
Identification Of Risk Factors Associated With Motorcycle-Related Fatalities In Ohio, Deogratias Eustace, Vamsi Krishna Indupuru, Peter W. Hovey
Civil and Environmental Engineering and Engineering Mechanics Faculty Publications
Out of the 7,138,476 motorcycles operating on U.S. roads, 346,925 were registered in the state of Ohio in the year 2007. Although motorcycles represent only 2.8% of all registered vehicles in the state of Ohio, motorcycling accounts for more than 13% of Ohio highway traffic fatalities. Since 2005, Ohio has had a distressing distinction of being among the fifteen states that have sustained more than half of all motorcycle fatalities recorded in the USA (NHTSA 2007; NHTSA 2008a). For the past ten years, the overall motorcycle crash fatalities have been increasing while the motor vehicle occupant crash fatalities have been …
Bs News July/August,
2011
Technological University Dublin
Risks Associated With Federal Construction Projects,
2011
Air Force Institute of Technology
Risks Associated With Federal Construction Projects, Krishna R. Surajbally
Theses and Dissertations
The rise in terrorism, corporate espionage, cyber attacks, and federal fiscal constraints play an important role in the federal construction process. The risks associated with these occurrences are studied to aid in the risk management of the military construction process. This paper presents the status of research into these areas to identify how methods, policies, applications, and information obtained from case studies can be used by stakeholders to manage risk in the United States Air Force construction process. The author reviewed research on risk associated with four essential components of the military construction process – Critical Infrastructure, Information Technology, Contracts, …
How Much Do U.S. University Students Know, And Want To Know, About Sustainability And Green Building? The Findings Of A Survey, And Possible Implications For General Elective Curricula.,
2011
Distance Masters Student
How Much Do U.S. University Students Know, And Want To Know, About Sustainability And Green Building? The Findings Of A Survey, And Possible Implications For General Elective Curricula., Jeremy R. Farner
Purdue Polytechnic Masters Theses
Using the survey approach, this investigation examined the attitudes and interest of college students at two universities in different geographic locations within the United States. Approximately 24,000 students from all disciplines and majors at Weber State University (WSU) in Utah, and 4,000 at Purdue University in Indiana, were invited to participate in a study to determine current knowledge, familiarity, and interest in topics within the sustainability and Green Building educational arena. The goal of this study was to determine what students already know, would like to know, and how much interest there would be in developing …
Two Dimensional Modeling Of Wind Effects On A Bridge Section Using Finite Difference Method,
2011
University of Arkansas, Fayetteville
Two Dimensional Modeling Of Wind Effects On A Bridge Section Using Finite Difference Method, Jessica Carreiro
Civil Engineering Undergraduate Honors Theses
Wind effects on long span bridges are a major concern for bridge design. Wind acts as a dynamic load on the bridge deck causing the bridge to react in ways not accounted for in static load design. Attention to these effects increased tremendously after famous bridge collapses, such as the Tacoma Narrows Bridge in 1940. Due to this collapse and others, engineers were made painfully aware that wind phenomena, such as flutter and vortex shedding, can cause major structural damage if not considered in the design process. The solution for many years since has been to conduct wind tunnel tests …
How Do Millennial Engineering And Technology Students Experience Learning Through Traditional Teaching Methods Employed In The University Setting?,
2011
Purdue University
How Do Millennial Engineering And Technology Students Experience Learning Through Traditional Teaching Methods Employed In The University Setting?, Elizabeth A. Howard
Department of Computer Graphics Technology Degree Theses
The purpose of the study was to document and analyze how Millennial engineering and technology students experience learning in large lecture classrooms. To help achieve this purpose, perceptions Millennials have toward traditional teaching methods employed in large lecture classes were analyzed and discussed. Additionally, this study documented how Millennials experienced technology within large lecture classrooms. A learning model depicting how Millennials experience learning within the large lecture classroom was created based on the results of this study. This model employed three separate tools utilized within the large lecture classroom. These tools: Lecture, Technology, and Homework, work together to synthesize learning …
Bs News May/June,
2011
Technological University Dublin
Impact Of Design Cost On Project Performance Of Design Bid Build Projects,
2011
University of Nevada, Las Vegas
Impact Of Design Cost On Project Performance Of Design Bid Build Projects, Nirajan Mani
UNLV Theses, Dissertations, Professional Papers, and Capstones
The majority of public projects in the United States are procured and constructed by state or local governments using the design-bid-build (DBB) project delivery method. In the DBB method, the detailed design is completed by a design firm, then, a contractor builds the project according to the plans and specifications prepared by the design firm. Some studies show that a project's performance depends upon the quality of the design. If the errors in a design are minimized, the construction cost and schedule growth of the project also will be minimized.
This study analyzed data from Clark County, Nevada public works …
How Much Do U.S. University Students Know, And Want To Know, About Sustainability And Green Building? The Findings Of A Survey, And Possible Implications For General Elective Curriculum.,
2011
Purdue University
How Much Do U.S. University Students Know, And Want To Know, About Sustainability And Green Building? The Findings Of A Survey, And Possible Implications For General Elective Curriculum., Jeremy R. Farner
Purdue Polytechnic Masters Theses
Using the survey approach, this investigation examined the attitudes and interest of college students at two universities in different geographic locations within the United States. Approximately 24,000 students from all disciplines and majors at Weber State University (WSU) in Utah, and 4,000 at Purdue University in Indiana, were invited to participate in a study to determine current knowledge, familiarity, and interest in topics within the sustainability and Green Building educational arena. The goal of this study was to determine what students already know, would like to know, and how much interest there would be in developing …
Gis Based Pavement Maintenance: A Systematic Approach,
2011
Purdue University
Gis Based Pavement Maintenance: A Systematic Approach, Robert J. Kmetz
Purdue Polytechnic Directed Projects
Abstract
According to 2008 Federal Highway Administration (FHWA) statistics, there are 2,734,102 miles of paved public roads in the United Sates, with an additional 1,324,245 miles of unpaved public roads. Road conditions deteriorate with time as the result of weather effects, deicing salts, and vehicle loads. The most common pavement distress includes cracking, rutting, and potholes. These pavement defects must be repaired to restore the pavement to a satisfactory service level for road users. According to the FHWA, in 2006 approximately $54.2 billion dollars was spent on maintenance and expansion, just on U.S. highways alone.
Routine maintenance is a cost …
Minidoka Memorial Hospital Expansion,
2011
Department of Civil Engineering, Boise State University
Minidoka Memorial Hospital Expansion, Bryanne Calkins, Mike Dupras, William Thornton, Brett Feichtinger, Corinne Haase, Ena Beganovic, Scott Moreno
College of Engineering Poster Presentations
The Minidoka Memorial Hospital is the main hospital serving Minidoka County. Due to an increase in farming and traffic accidents, the emergency facilities are no longer adequate and require expansion.
Development Of An Integrated Project-Based Course: A Jobsite Management Class Case Study,
2011
California Polytechnic State University, San Luis Obispo
Development Of An Integrated Project-Based Course: A Jobsite Management Class Case Study, Philip L. Barlow
Construction Management
At universities offering professional degrees, such as construction management, some programs are moving towards and exploring alternative delivery methods for achieving the curriculum’s goals and objectives. This paper describes a curriculum integrated course founded in a project-based learning environment applied to a jobsite construction management undergraduate course being taught at a major university. A course overview describing the various delivery methods used (such as lectures, reading assignments, supplemental materials, guest lecturers, lab assignments, technology, and a jobsite visit) is presented. The benefits of course integration in a construction management undergraduate curriculum are emphasized and more fully explained. The unique student …
Embodied Emissions Abatement: A Policy Assessment Using Stochastic Analysis,
2011
Technological University Dublin
Embodied Emissions Abatement: A Policy Assessment Using Stochastic Analysis, Adolf Acquaye, Aidan Duffy, Biswajit Basu
Articles
Policymakers traditionally focus on regulating operational energy use in buildings, ignoring other life cycle components such as embodied energy even though this may account for a significant portion of life cycle emissions. Data relating to embodied energy and emissions in buildings is limited. However, stochastic techniques can be used to estimate the distribution of such emissions from buildings. This helps policymakers identify which instruments are appropriate for achieving emissions reductions. A primary aim of this paper is to demonstrate this approach using a sample of apartment buildings in Ireland. A Monte-Carlo simulation suggests that the average probability distribution of embodied …
Green Building Policy And School Performance,
2011
California Polytechnic State University, San Luis Obispo
Green Building Policy And School Performance, S. Kelting, M. Montoya
Construction Management
The movement to construct high performance “green” buildings has had unprecedented market growth and continues to become a mainstream practice for constructing schools in the United States. This paper will consider how the results of government requirements for higher performance school buildings may affect the health and performance of students. The research focuses on educational leaders’ perceptions of how they would prioritize green building strategies based on recent governmental policy that requires building green schools. There is clear and compelling evidence that schools currently built to specific green standards of indoor environmental quality, specifically lighting, result in healthier and more …
A Study Of The Cause Of Failure Of Rotationally Molded, High-Density Polyethylene, Sodium Hypochlorite Storage Tanks,
2011
Brigham Young University - Provo
A Study Of The Cause Of Failure Of Rotationally Molded, High-Density Polyethylene, Sodium Hypochlorite Storage Tanks, Dixon Harold Abell
Theses and Dissertations
The topic of chemical oxidative degradation in rotational molded polyethylene (high-density cross-linked) chemical (sodium hypochlorite) storage tanks is an industry problem that ranks at the top of current business issues for manufacturers of chemical storage tanks. The degradation of these tanks not only compromises the physical and mechanical properties of the tank material, but reduces the life expectancy of the tank, eventually resulting in catastrophic tank failure. Premature tank failure comes at a hefty cost. The reputation of the manufacturer is questioned often resulting in immediate loss of customer satisfaction and future business. The leaking of the chemical from the …
Application Of Relational Contracting Methods To Federal Construction Projects,
2011
Air Force Institute of Technology
Application Of Relational Contracting Methods To Federal Construction Projects, Travis R. Johnson
Theses and Dissertations
Relational contracting is a method designed to improve relationships between contracted parties. The federal construction sector was a leader in the development and implementation of an early form of relational contracting known as partnering. Since then, alliancing has emerged as the new evolution of relational contracts. While it provides many potential benefits to contracting parties, alliancing has not yet been utilized in federal construction procurement, which is subject to stringent regulations. A commercially available standard form alliancing contract was selected for analysis against the Federal Acquisition Regulation. Key practices that characterize the alliancing method were identified. Utilizing a panel of …
Understanding Schedule Forecasting Shortfalls In Federal Design-Build Facility Procurement,
2011
Air Force Institute of Technology
Understanding Schedule Forecasting Shortfalls In Federal Design-Build Facility Procurement, Timothy W. Gannon
Theses and Dissertations
This research explores whether initial schedules provide reliable forecasting for project control in federal design build facility procurement. The purpose of this research is to understand how scheduling operates in the Department of Defense environment and identify how project change underscores schedule uncertainty. The research methodology involves a comparative analysis of project schedule data from three case studies. The investigation documents how initial project schedules fail to sufficiently forecast and provide a reliable baseline for total cost, final duration, and activity count for three design-build projects. Most schedule variability occurs after the 100% design benchmark. Furthermore, activity growth highlights the …
Tool Life Of Various Tool Materials When Friction Spot Welding Dp980 Steel,
2011
Brigham Young University - Provo
Tool Life Of Various Tool Materials When Friction Spot Welding Dp980 Steel, Christopher Shane Ridges
Theses and Dissertations
In this study, friction spot welding was used to join DP980 steel sheet. Four different ultra-hard tool materials were used with the objective of determining which tool material produced the highest number of acceptable-strength welds. Three of the tools were composed of various mixtures of polycrystalline cubic Boron Nitride (PCBN), Tungsten, and Rhenium. These materials are referred to herein as Q60, Q70, and Q80, the "Qxx" designation denoting the percentage of the volume of the tool material composed of PCBN. The fourth tool tested was composed entirely of PCBN. The Q70 tool produced approximately 1100 welds of acceptable strength before …
Development And Delivery Of An Integrated Project-Based Jobsite Management Undergraduate Course,
2011
California Polytechnic State University, San Luis Obispo
Development And Delivery Of An Integrated Project-Based Jobsite Management Undergraduate Course, Philip L. Barlow
Construction Management
At universities offering professional degrees, such as construction management, some programs are moving towards and exploring alternative delivery methods for achieving the curriculum's goals and objectives. This article describes an integrated and project-based learning Jobsite Construction Management course being taught at a major university. A course overview describing the various delivery methods used (such as lectures, reading assignments, supplemental materials, guest lecturers, lab assignments, technology, and jobsite visits) is presented. The benefits of vertical and horizontal course integration in a project-based learning environment are emphasized and more fully explained. A class survey was conducted over two quarters to assess the …
