Construction Engineering and Management Commons^™

Developing Standard Procedures For Structural Aspects Of Slide-In Bridges In Accelerated Bridge Construction (Abc), Ozan Utku Ridvanoglu

Masters Theses

Slide-in bridge construction (SIBC) is a special method especially used to replace an existing bridge with the minimum duration road closure. In this method, new bridge superstructure is built next to the existing one and it is slid to its final position after demolishing the existing one. Applied implementations of SIBC show that several complications are experienced during bridge slide related with surface interaction. There is a need to evaluate the structural components of SIBC to develop suggestions. In this research, structural components of SIBC were investigated. The research dealt with completed SIBC implementations and numerical modelling of the slide …

Education For Sustainable Development- The Irish Construction Sector And The Need For A Sustainable Approach, Conor Mcmanus

Masters

This study explores the path to be taken towards achieving Sustainable Development. It examines the impact the construction industry has on the environment as a result of a knowledge and skills gap and considers how our present way of thinking facilitates this. It then goes on to show how a change in construction education can bring about change in the industry and facilitate the implementation of sustainable development. The study examines how the singular emphasis on technology, the introduction of the ‘expert’ into the domestic building process and the narrow focus on operational energy conservation raises questions about Ireland's present …

Cyclic Behavior Of A Hybrid Light Gauge And Hss Mezzanine Structural System, Michael John Kren

Master's Theses (2009 -)

Cold-formed steel is emerging as an alternative material in the building industry to hot-rolled steel for smaller buildings and indoor structures also called mezzanines. Cyclic testing of a full-scale mezzanine structures composed of cold-formed structural channel beams connected to hollow structural steel (HSS) columns cap plates using wedge expansion anchors at the base plate to generate rotation restraint, is performed in this research. The characteristics of the structure will be explained by displaying full experimental results of structural testing. Unfortunately, limited experimental data outlining the behavior of these structures is available and design criteria is very limited. Thus, there is …

The Professional Constructor, Full Issue, Volume 40, Number 01

The Professional Constructor

No abstract provided.

Mission Dependency Index Of Air Force Built Infrastructure: Knowledge Discovery With Machine Learning, Clark W. Smith

Theses and Dissertations

Mission Dependency Index (MDI) is a metric developed to capture the relative criticality of infrastructure assets with respect to organizational missions. The USAF adapted the MDI metric from the United States Navy’s MDI methodology. Unlike the Navy’s MDI data collection process, the USAF adaptation of the MDI metric employs generic facility category codes (CATCODEs) to assign MDI values. This practice introduces uncertainty into the MDI assignment process with respect to specific missions and specific infrastructure assets. The uncertainty associated with USAF MDI values necessitated the MDI adjudication process. The MDI adjudication process provides a mechanism for installation civil engineer personnel …

An Economic Analysis Of The Transition Of A Contingency Military Installation To An Enduring Status Using Monte Carlo Simulations, Ryan M. Amedee

Theses and Dissertations

The construction of expeditionary bases is central to Department of Defense’s (DoD) responses to contingency operations. Usually expected to be transitory, expeditionary bases are constructed with temporary materials that can be erected quickly. The Global War on Terrorism is entering its fifteenth year and bases within Central Command that were expected to be temporary have provided an enduring presence. The decision to transition a base from temporary to semi-permanent or permanent is difficult, as it requires substantial capital investment for facility construction. This decision is further complicated by unknown mission durations. The DoD has attempted to reduce the decision’s complexity …

Forensic Schedule Analysis Of Construction Delay In Military Projects In The Middle East, James W. Forbes

Theses and Dissertations

This research performs forensic schedule analysis of delay factors that impacted recent large-scale military construction projects in the Middle East. The purpose of this study is to understand the most significant causes of project delay and how AFCEC might improve schedule management performance. The methodologies for analysis are adapted from the Professional Practice Guide to Forensic Schedule Analysis, particularly Method 3.7 Modeled/Additive/Multiple Base, or Time Impacted Analysis—Adjusted. The data is gathered from USACE and AFCEC, consisting of Primavera project schedules and project documents from the Resident Management System database. The project delays from two large-scale projects are apportioned as compensable, …

Storm Damage - Murphy's Law, Dale Sedler, Mark Bailey

Purdue Road School

Examination of a disastrous event that required 4 coinciding occurrences happening that individually would likely have resulted in minor or no damage.

Storm Damage - Floating Culverts, Dale Sedler, Mark Bailey

Purdue Road School

A review of buoyancy issues culverts experience due to blockage. Includes discussion of blockage due to floating debris and issues with multiple culverts. Provides information on characteristics that help to determine if a culvert has "floated."

Storm Damage - Sr-57 June 2008, Dale Sedler, Mark Bailey

Purdue Road School

A review of the impact of the White River leaving its watershed and destroying a box culvert under SR-57 in Greene County, IN. Includes discussion about impact of illegal levee, and photos and discussion on contraction scour.

Predicting Construction Labor Productivity With Bayesian Belief Networks, Ayoub Hazrati

Department of Construction Engineering and Management: Dissertations, Theses, and Student Research

Construction labor productivity plays an important role in labor intensive projects. Therefore, increasing construction labor productivity is a vital task to decrease a project’s cost (time). The primary goal of this research is to investigate the feasibility of developing a comprehensive causal model that can predict construction labor productivity for various project’s situations, such as existence of “Adverse Weather,” “Changes,” “Working Overtime,” etc., while considering uncertainty. It is found that Bayesian Belief Networks (BBNs) is the best approach that can model causal relationships among different factors while considering uncertainty, simultaneously.

Developing a BBNs model requires to extract its structure and, …

Bs News March/April

Building Services Engineering

No abstract provided.

Spring 2016 - Volume 40, Number 1, Full Issue

The Professional Constructor

No abstract provided.

Strategies For Reducing The Environmental Impacts Of Construction, Jordan Moran

The Professional Constructor

Sustainable building is a complex goal to reach even for the most seasoned project managers. If theyfocus on the ideas to reduce, reuse, and recycle that goal becomes much more obtainable. The project manager mustset his expectations and priorities from the moment the contract is signed to navigate which routes are most possible toachieve given the project scope and delivery method. The key to success is to relay the long term benefits of sustainablebuilding on to the owner, and make them realize that up-front cost should take a back seat to life cycle. This will save theenvironment and the owner’s …

General Interest Articles, The Professional Constructor

The Professional Constructor

No abstract provided.

Contractor Feasibility In Providing Cost Segregation Studies From Detailed Estimates: A Case Study, Ben F. Bigelow, Jeremy Robinson, John Killingsworth

The Professional Constructor

Profit margins are tight for general contractors, averaging under 3% (Construction Financial Management Association). Further, competition for projects can be very fierce, so any opportunity for increased profit or a competitive advantage in bidding bears consideration by general contractors. Cost segregation studies represent such an opportunity but the feasibility of a general contractor providing them has not been studied. A cost segregation study allows a property owner to accelerate the depreciation of certain portions of a building thus reducing tax liability and increasing cash flow. Because the information needed for a cost segregation study can be found in a detailed …

A Framework For Analyzing Intraorganizational Congruence Of Safety Practices On Safety Performance – A Pilot Study Of Construction, Benjamin Hill, Mohammed S. Hashem M. Mehany, Richard J. Gebken

The Professional Constructor

Previous research has determined that improving employee congruence on organizational methods and goals leads to improved organizational performance. This research establishes a comprehensive framework of common and recommended safety practices that can be used for intraorganizational congruence data collection regarding safety practices. The research is also developing a method for congruence calculation and examine the congruence effect on the subcontractor’s safety performance metrics through a pilot study. The established framework identified and organized 170 practices under seven conceptual, safety-practice categories. The congruence analysis and the pilot study revealed several areas of high and low congruency along with significant correlations between …

Factors Of Employee Loyalty Among Construction Management Field Personnel, Estimators & Bim/Design Specialists: Insights For General Contractors, Colby Humphrey, Ben F. Bigelow

The Professional Constructor

Since 2008 construction employment has dropped considerably and has remained below 2007 levels, with construction management positions still about 14% down (U.S. Department of Labor 2015). Despite the boom currently occurring in the construction industry, general contractors (GCs) are finding it difficult to fill project management positions (AGC 2014), and construction firms expect these challenges to continue (Mutikani 2014). With greater demand for managers, retaining quality people is a paramount concern. Everyone knows the adage that “money talks”, but what can a GC do to engender loyalty besides just paying more? To explore that question and attempt to better understand …

Construction Industry Professionals Perception Of Project Management Certification In The Houston Texas Region, Lana K. Coble, Margaret D. Watson

The Professional Constructor

Individual construction design professionals are evaluated on their abilities by state licensing boards in all 50 states of North America. The construction industry has relied upon construction company licenses in 42% of the United States to ensure that buildings are constructed to local area codes. Current practices have created a credibility gap when comparing construction managers to design professionals. Only since the 1970s, have third party agencies led an effort to provide construction management professionals with a certification to establish baseline competencies. To date, research on construction manager certification has been minimal; therefore, this research attempts to contribute to needed …

Measuring Organizational Learning Success In Commercial Construction During Economic Recession, Evan Danforth, Justin Weidman, Clifton Farnsworth

The Professional Constructor

The method through which organizations collect and internalize knowledge, termed organizational learning, has been theorized to significantly influence company performance. Specifically, the speed and accuracy of knowledge transfer boasted by organizational learning proponents is thought to assist companies in dealing with, and even benefiting from, environmental changes such as economic volatility. This research studied the organizational learning of fifteen commercial construction companies in the southwestern United States during the 2008-2009 U.S. recession through semi-structured interviews. It was found that the companies that exhibited dramatically higher or lower levels of organizational learning generally experienced correspondingly higher or lower performance. The contribution …