Civil Engineering Commons^™

Impact Of Image Resolution On Pavement Distress Detection Using Picucha Methodology, Reus Salini, Bugao Xu, Mena I. Souliman

Civil Engineering Faculty Publications and Presentations

An accurate and regular survey of the road surface distresses is a key factor for pavement rehabilitation design and management, allowing public managers to maximize the value of the continuously limited budgets for road improvements and maintenance. Manual pavement distress surveys are labor-intensive, expensive and unsafe for highly-trafficked highways. Over the years, automated surveys using various hardware devices have been developed and improved for pavement field data collection to solve the problems associated with manual surveys. However, the reliable distress detection software and the data analysis remain challenging. This study focused on the analysis of a newly-developed pavement distress classification …

Performance Implications Of Bicycle Specific Treatments At Signalized Intersections, Andrew Kading

Civil and Environmental Engineering Master's Project Reports

A rise in cycling nationwide has brought an increased awareness of bicycle specific safety concerns, particularly right-hook crashes at signalized intersections. There are several common and emerging signal timing strategies that are can be used to improve the safety and efficiency of traffic signals for people on bicycles, including the Leading Bicycle Intervals (LBI), Split LBI, and Exclusive Bicycle Phasing (EBP). The leading and split bicycle intervals provide a head start for bicycles in advance of concurrent and conflicting motor vehicle movements, typically about 3-5 seconds. The EBP provides an interval only when bicycles are moving. To examine the performance …

Investigating The Relationship Between Latent Driving Patterns And Traffic Safety Using Smartphone-Based Mobile Sensor Data, Kenneth Wynne

Civil & Environmental Engineering Theses & Dissertations

Crash frequency modelling has been used in the past as an attempt to quantify the expected number of crashes occurring on a certain segment of roadway given a set of variables and factors describing the roadway segment and the traffic along that segment. These models are referred to as the Safety Performance Functions (SPFs) in the Highway Safety Manual (HSM). In past studies, these SPFs have focused primarily on roadway geometric information along with limited traffic exposure data such as traffic volume. Alternate data sources for probe vehicle data are increasingly available and this research sought to exploit this new …

Texture Analysis Using The Neutron Diffraction Method On The Non Standardized Austenitic Steel Process By Machining,Annealing, And Rolling, Tri Hardi Priyanto, Parikin Parikin, Meijuan Li

Makara Journal of Technology

Austenitic steel is one type of stainless steel which is widely used in the industry. Many studies on austenitic stainless steel have been performed to determine the physical properties using various types of equipment and methods. In this study, the neutron diffraction method is used to characterize the materials which have been made from minerals extracted from the mines in Indonesia. The materials consist of a granular ferro-scrap, nickel, ferro-chrome, ferro-manganese, and ferro-silicon added with a little titanium. Characterization of the materials was carried out in three processes, namely: machining, annealing, and rolling. Experimental results obtained from the machining process …

Estimating River Discharge Using Multiple-Tide Gauges Distributed Along A Channel, Hamed R. Moftakhari, David A. Jay, Stefan Talke

Civil and Environmental Engineering Faculty Publications and Presentations

Reliable estimation of freshwater inflow to the ocean from large tidal rivers is vital for water resources management and climate analyses. Discharge gauging stations are typically located beyond the tidal intrusion reach, such that inputs and losses occurring closer to the ocean are not included. Here, we develop a method of estimating river discharge using multiple gauges and time-dependent tidal statistics determined via wavelet analysis. The Multiple-gauge Tidal Discharge Estimate (MTDE) method is developed using data from the Columbia River and Fraser River estuaries and calibrated against river discharge. Next, we evaluate the general applicability of MTDE by testing an …

Thermal Properties, Crystallinity, And Oxygen Permeability Of Na-Montmorillonite Reinforced Plasticized Poly(Lactic Acid) Film, Kurniawan Yuniarto, Yohanes Aris Purwanto, Setyo Purwanto, Bruce A. Welt, Hadi Karia Purwadaria, Titi Candra Sunarti

Makara Journal of Technology

Introducing unmodified organically clay/Na-montmorillonite (Na-MMT) was applied into plasticized poly(lactic acid) PLA to produce film composites by direct casting. Film composite structure, the crystallinity degree and form, and thermal properties were carried out using X-ray diffraction and differential scanning calorimetry. The effect of Na- MMT to the tortuous path and the crystallinity degree in the plasticized film composites were calculated in oxygen barrier properties. Chromatogram film composites resulted in an intercalated structure that showed peak diffraction angle shift at about 0.2o. Then, a peak diffraction pattern was indicated in α-form crystal structure. Plasticized PLA has a crystallinity degree at 34%, …

Residual Strength Analysisof Asymmetrically Damaged Ship Hull Girderusing Beam Finite Element Method, Muhammad Zubair Muis Alie

Makara Journal of Technology

The objective of the present study is to analyze the residual strength of asymmetrically damaged ship hull girder under longitudinal bending. Beam Finite Element Method is used for the assessment of the residual strength of two single hull bulk carriers (Ship B1 and Ship B4) and a three-cargo-hold model of a single-side Panamax Bulk Carrier in hogging and sagging conditions. The Smith’s method is adopted and implemented into Beam Finite Element Method. An efficient solution procedure is applied; i.e. by assuming the cross section remains plane, the vertical bending moment is applied to the cross section and three-cargo-hold model. As …

Maneuverability Of Ships With Small Draught In Steady Wind, Daeng Paroka, Andi Haris Muhammad, Syamsul Asri

Makara Journal of Technology

Wind force and moment may force a ship to drastically decrease its speed and use a large drift angle as well as a large rudder angle in order to maintain its course. Ships with a small draught might have more risk in maneuvering to its point of view compared with a ship with a larger draught. This paper discusses maneuverability of a ship with a small draught in steady wind. The effect of wind on ship speed, drift angle, and rudder angle are investigated in a steady state condition. Five different ratios of wind velocity to ship speed from 1.0 …

Discrete Power Control In Heterogenous Networks, Yuanyuan Wang, Wibowo Hardjawana, Branka Vucetic

Makara Journal of Technology

In heterogeneous networks (HetNets) where femtocell base stations (FBSs) are deployed within the radio coverage of macrocell base stations (MBSs) to increase network capacity, co-channel interference limits overall system performance with universal frequency reuse. This paper investigates new distributed downlink discrete power control scheme for FBSs in HetNets with FBSs cooperation. The objective of the proposed power control scheme is to maximize the number of simultaneous FBSs transmissions in a single transmission wireless channel where each FBS is allowed to transmit only if the signal-to-interference-noise ratio (SINR) requirements for both FBSs and MBS users are satisfied. We apply a stochastic …

Multi-Project Scheduling Cost Optimization In A Machine Manufacturer Engineer-To-Order, Farizal Farizal, Amar Rachman, Tifani Tandean, Sumarsono Sudarto, Katsuhiko Takahashi

Makara Journal of Technology

This paper discusses the utilization of mixed integer linear programming (MILP) model to optimize cost for multiproject scheduling in a machine maker company. The objective is to minimize total project’s penalty cost and labor cost. The model formulated shows how to achieve the objective i.e. whether to use outsourcing or overtime to finish all projects. The model of multi-project scheduling was solved by Branch & Bound algorithm coded in Lingo 14.0 software. The case study shows that if a company wants to minimize lateness, it should use overtime instead of outsourcing, which minimize total lateness of projects by 144 days …

Analysis Of Arm Movement Prediction By Using The Electroencephalography Signal, Reza Darmakusuma, Ary Setijadi Prihatmanto, Adi Indrayanto, Tati Latifah Mengko, Lidwina Ayu Andarini, Achmad Furqon Idrus

Makara Journal of Technology

Various technological approaches have been developed in order to help those people who are unfortunate enough to be afflicted with different types of paralysis which limit them in performing their daily life activities independently. One of the proposed technologies is the Brain-Computer Interface (BCI). The BCI system uses electroencephalography (EEG) which is generated by the subject’s mental activity as input, and converts it into commands. Some previous experiments have shown the capability of the BCI system to predict the movement intention before the actual movement is onset. Thus research has predicted the movement by discriminating between data in the “rest” …

A Review Of Advances In The Identification And Characterization Of Groundwater Dependent Ecosystems Using Geospatial Technologies, Isabel C. Pérez Hoyos, Nir Y. Krakauer, Reza Khanbilvardi, Roy A. Armstrong

Publications and Research

Groundwater Dependent Ecosystem (GDE) protection is increasingly being recognized as essential for the sustainable management and allocation of water resources. GDE services are crucial for human well-being and for a variety of flora and fauna. However, the conservation of GDEs is only possible if knowledge about their location and extent is available. Several studies have focused on the identification of GDEs at specific locations using ground-based measurements. However, recent progress in remote sensing technologies and their integration with Geographic Information Systems (GIS) has provided alternative ways to map GDEs at a much larger spatial extent. This paper presents a review …

In-Situ Testing Of Uretek's Injectable BarrierSm As A Mechanism For Groundwater Control, Jeremy Hess

USF Tampa Graduate Theses and Dissertations

Construction projects involving the installation or repair of subsurface structures or utilities often require dewatering to induce a temporary lowering of the local groundwater elevation to facilitate construction. In the event that a known contaminant plume is present in an adjacent area, this dewatering may inadvertently draw the contaminant into the previously uncontaminated work area. Uretek Holdings, Inc. has developed its Injectable Barrier^SM to be installed prior to dewatering exercises to provide a groundwater cut-off by reducing the potential movement of groundwater due to the hydraulic gradient induced by dewatering. A benefit of Injectable Barrier^SM as compared to …

Civil Engineer Company Grade Officer Training Needs Analysis For Contingency Operations, Brian S. Greszler

Theses and Dissertations

In terms of active duty personnel, the USAF is the smallest it has ever been since its creation in 1947. With fewer personnel to accomplish essential tasks, the training of Airmen is more important than ever. Outdated and irrelevant training can lead to gaps in the knowledge of trainees. The purpose of this research was to analyze the training needs of Civil Engineer (CE) Company Grade Officers (CGOs) in the contingency environment. This was done by first conducting a Job Analysis (JA). The JA resulted in a list of 36 critical tasks and 58 important Knowledge, Skills, and Abilities (KSAs). …

Cement Heat Of Hydration And Thermal Control, Ahmadreza Sedaghat

USF Tampa Graduate Theses and Dissertations

Heat of hydration is a property of Portland cement and a direct result of the chemical reaction between cement and water. The amount of heat released is dependent upon the cement mineralogical composition, curing temperature, water to cement ratio, and cement fineness. High temperature resulting from heat of hydration (thereon referred to as HOH) of cement can affect the hydration process, and consequently the kinetics of development of the mechanical properties of concrete. One of the main reasons triggering the interest in HOH of cement is its implication in thermal cracking of concrete. The high temperature gradient between the inner …

Behavior Of Prestressed Concrete Beams With Cfrp Strands, Yasir Matloob Saeed

Dissertations and Theses

The high cost of repairing reinforced or prestressed concrete structures due to steel corrosion has driven engineers to look for solutions. Much research has been conducted over the last two decades to evaluate the use of Fiber Reinforced Polymers (FRPs) in concrete structures. Structural engineering researchers have been testing FRP to determine their usability instead of steel for strengthening existing reinforced concrete structures, reinforcing new concrete members, and for prestressed concrete applications. The high strength-to-weight ratio of FRP materials, especially Carbon FRP (CFRP), and their non-corrosive nature are probably the most attractive features of FRPs.

In this study, an experimental …

Modeling The Extent Of Virus Removal In Waste Stabilization Ponds To Support Reuse Of Wastewater, Kelly James Vannoy

USF Tampa Graduate Theses and Dissertations

Waste stabilization ponds (WSPs) are one of the most prevalent types of domestic wastewater treatment technologies employed worldwide, and global stressors such as urbanization, population growth, climate change, and water scarcity have increased the demand for reusing treated wastewater. The safe reuse of treated wastewater in agriculture can ease water scarcity, aid in food production, and reduce environmental degradation from the discharge of wastewater effluent to surface waters. The ability to predict virus concentrations in wastewater effluent is an important criterion for determining whether wastewater is suitable for discharge to the environment or for reuse in agriculture. However, many uncertainties …

Full Scale Evaluation Of Organic Soil Mixing, Kelly Costello

USF Tampa Graduate Theses and Dissertations

Soil mixing is a procedure that has proven to be effective for loose or soft compressible soils. The method stabilizes the soil in-place using specialized augers, tillers, or paddles that inject grout or dry cementitious powders as part of the mixing process. The Federal Highway Administration design manual for soil mixing helps to estimate the required amount of cementitious binder to produce a target design strength. However, it is biased towards inorganic soils and only mentions caution when confronting organic soils which usually come with a high water table, moisture content and void volume.

The Swedish Deep Stabilization Research Centre …

Community-Scale Water Treatment Systems In The Dominican Republic, Water Supply In The Dr

Engagement & Service-Learning Summit

No abstract provided.

Full Depth Reclamation Of Aviation Pavement, Michael W. Buening

Purdue Road School

Full depth reclamation (FDR) has been utilized multiple times in recent years for airport and roadway pavement rehabilitation. The presentation will review FDR and its use as a treatment for aviation pavements.