Civil Engineering Commons^™

Zombie Shelter Location, Shanna Carroll, Tyler Lindsay, Hannah Rasmussen

Engineering Applications of GIS - Laboratory Exercises

One common use of GIS is determining ideal locations for projects. This is because GIS makes it very easy to combine and analyze spatial data in a customized way. In this exercise, assume that there has been a recent zombie outbreak in Utah, USA. To determine the ideal hideout location, data that indicates a safe location must be acquired and combined with geography that is conducive to wilderness survival. Once the data is gathered, spatial analysis using GIS overlay tools must be conducted to determine the ideal location for an anti-zombie hideaway hut. In this exercise, multiple tools will be …

Evaluation Of Woodchip Bioreactor Denitrification Kinetics, Abdoul Aziz Kouanda

Electronic Theses and Dissertations

Agricultural subsurface drainage is a water management practice used to remove excess water in poorly drained soil. The use of fertilizers combined with subsurface drainage practice affects negatively surface water quality due to nutrient loss. Woodchip bioreactors have previously been used as a technology for removing nitrate from agricultural subsurface drainage. Understanding the mechanism that governs nitrate removal in woodchip bioreactors is crucial for field bioreactor design and application. The objective of this project is to determine woodchip bioreactor denitrification kinetics parameters under different operating conditions including hydraulic retention time, temperature and influent nitrate concentrations. Laboratory column experiments were conducted …

Compact Facility For Testing Steady And Transient Thermal Performance Of Building Walls, Aimee Byrne, Gerard Byrne, Anthony Robinson

Articles

Energy efficiency retrofit of buildings represents a key effort in reducing EU energy demand by 20% by 2020. However, predictions tend to overestimate savings by large percentages. The shortfall in savings can be attributed to incorrect predictive techniques, comfort takeback along with other behavioural and workmanship variables. Common predictive techniques related to heat loss tend to be based on the U-value of the building envelope. This paper presents the design of a more straightforward and compact version of the traditional Hot-Box apparatus (measures U-value) which instead determines the thermal resistance of samples of building envelope. U-value includes the need to …

Optimising The Performance Of Cement-Based Batteries, Aimee Byrne, Shane Barry, Niall Holmes Dr., Brian Norton

Articles

The development of a battery using different cement-based electrolytes to provide a low but potentially sustainable source of electricity is described. The current, voltage, and lifespan of batteries produced using different electrolyte additives, copper plate cathodes, and (usually) aluminium plate anodes were compared to identify the optimum design, components, and proportions to increase power output and longevity. Parameters examined include water/cement ratio, anode to cathode surface area ratio, electrode material, electrode spacing, and the effect of sand, aggregate, salts, carbon black, silica fume, and sodium silicate on the electrolyte. The results indicate that the greatest and longest lasting power can …

Low-Cost Fishing Net-Reinforced Cement Matrix Overlay For Substandard Concrete Masonry In Coastal Areas, Mohammed A. Mousa

Theses and Dissertations

The aim of this project is to investigate a novel and affordable option to externally strengthen substandard concrete masonry (CM) walls for out-of-plane loads (e.g., high winds and flying debris). Two types of strengthening materials for fiber-reinforced cement mortar (FRCM) overlays are investigated; namely, fishing net (FN) and welded wire steel mesh (WWSM) reinforcements.

Salient mechanical properties of representative materials including substandard concrete masonry unit (CMU) blocks, mortar, nylon FN and WWSM reinforcements, and FRCM composite, were experimentally characterized. A simple bilinear model is proposed to describe the tensile behavior of the FRCM composite. An analytical model was then used …

The Effects Of Thermal Improvements For Concrete On Resulting Mechanical Properties, Elijah Jaime

Summer Community of Scholars Posters (RCEU and HCR Combined Programs)

No abstract provided.

Statistical Study For Bridge Deterioration Across Alabama, Cameron Mcwilliams

Summer Community of Scholars Posters (RCEU and HCR Combined Programs)

No abstract provided.

Novel Applications Of Pulse Pre-Pump Brillouin Optical Time Domain Analysis For Behavior Evaluation Of Structures Under Thermal And Mechanical Loading, Yi Bao

Doctoral Dissertations

"This study aims to: (1) develop an analytical model for the strain transfer effect of distributed fiber optic sensors in a uniform or non-uniform stress field; (2) develop a measurement approach to monitor strains in concrete and detect damage (e.g. crack and delamination) in bonded and unbonded concrete overlays; (3) characterize the strain and temperature sensitivities of distributed fiber optic sensors at elevated temperatures; (4) develop a thermal annealing approach to enhance the thermal stability and temperature sensitivity of the distributed sensors; and (5) apply the distributed sensors to assess structural behaviors of concrete and steel structures exposed to fire. …

High-Volume Recycled Materials For Sustainable Transportation Infrastructure, Seyedhamed Sadati

Doctoral Dissertations

"The objective of this study is to investigate the feasibility of using high performance concrete made with high-volume of recycled materials in transportation infrastructure. The main focus was to develop mixtures for rigid pavement construction. A variety of fine and coarse recycled concrete aggregates (RCA) were investigated. The feasibility of replacing 50% of Portland cement with industrial by-products and supplementary cementitious materials (SCMs) was also evaluated. Experimental program was conducted to quantify the effect of concrete mixture design and RCA characteristics on mechanical properties, drying shrinkage, cracking potential, and durability of concrete. The development of a database and analysis using …

Smart Rocks For Bridge Scour Monitoring -- Design And Localization Using Electromagnetic Techniques And Embedded Orientation Sensors, Andro Radchenko

Doctoral Dissertations

"River bridge scour is an erosion process in which flowing water removes sediment materials (such as sand, rocks) from a bridge foundation, river beds and banks. As a result, the level of the river bed near a bridge pier is lowering such that the bridge foundation stability can be compromised, and the bridge can collapse. The scour is a dynamic process, which can accelerate rapidly during a flood event. Thus, regular monitoring of the scour progress is necessary to be performed at most river bridges. Present techniques are usually expensive, require large man/hour efforts, and often lack the real-time monitoring …

Remote Sensing And Localization Of Smart Rocks With Orientation-Controlled Magnets For Real-Time Monitoring Of Bridge Scour And Riprap Effectiveness, Yan Tang

Doctoral Dissertations

"This study aims to develop and implement a novel smart rock technology for real-time monitoring of the maximum scour depth and the effectiveness of riprap mitigation measures. A smart rock is one or more stacked magnets encased in concrete that can automatically roll to the deepest point of a scour hole around a bridge pier and provide its location through remote measurement over time. Once integrated into a riprap measure, the smart rock moves together with natural rocks and is thus a potential indicator of the effectiveness of the riprap measure. Therefore, the localization and movement of smart rocks were …

Durability Behavior Of Fiber Reinforced Polymer And Steel Reinforced Polymer For Infrastructure Applications, Wei Wang

Doctoral Dissertations

"Crack development in reinforced concrete (RC) structures is common in elements such as bridge decks. However, these cracks can impose significant problems over time, because they allow chlorides from deicing chemicals to infiltrate concrete which will then corrode steel bars as RC structures are exposed to harsh weather. In the last decade, composite reinforcement systems are internally or externally applied to concrete structures instead of traditional steel reinforcing bars, or to strengthen concrete elements in flexure and shear. However, studies regarding the long-term durability performance of composite reinforcement systems is limited. Therefore, in order to popularize the application of these …

Design And Performance Of Cost-Effective Ultra High Performance Concrete For Bridge Deck Overlays, Mahdi Valipour

Doctoral Dissertations

"The main objective of this research is to develop a cost-effective ultra-high performance concrete (UHPC) for bonded bridge deck overlays. The high durability and mechanical properties of such repair material can offer shorter traffic closures and prolong the service life of the pavement. The UHPC was optimized using supplementary cementitious materials (SCMs), proper combinations of sands, and adequate selection of fiber types and contents. Packing density studies included paste, sand, and fiber combinations. The robustness of optimized UHPC mixtures to variations of mixing and curing temperatures was examined. The efficiency of various shrinkage mitigation approaches in reducing autogenous and drying …

Long-Period Fiber Grating Corrosion Sensors For Life-Cycle Monitoring And Assessment Of Reinforced Concrete Structures, Yizheng Chen

Doctoral Dissertations

"This study aims to: (1) explore, develop, calibrate and validate Fe-C coated, long period fiber grating (LPFG) sensors for short-term mass loss measurement of the Fe-C coating; (2) develop, calibrate, and validate steel tube-encapsulated, fiber optic probes and LPFG sensors for long-term mass loss detection of the steel tube; (3) correlate the corrosion process of packaging metal materials with that of steel bars in direct contact with the packaged probe or sensor except for a thin insulation tape; and (4) apply both types of corrosion sensors into reinforced concrete (RC) structures for reinforcing bar corrosion monitoring and structural condition assessment. …

Reducing Model Selection Computational Cost By Metamodeling The Evidence, Ramin Madarshahian

Theses and Dissertations

Modeling is an abstraction of reality that lets a designer or engineer perform simulations with a “real” object or structure without testing it physically. However, the result of simulations is as good as their models. Selecting the best model among many candidates is another challenge.

Complex models could translate into more accurate predictions, but they also require larger computational effort. The Bayes factor is often used to compare different models considering the data and analyst’s experience. To obtain the Bayes factor, the Bayesian model evidence is calculated; however, calculating the Bayesian model evidence of computationally expensive models is not a …

Investigating The Feedstock Properties And Process Conditions Influencing The Characteristics Of Products Generated From The Hydrothermal Carbonization Of Organic Feedstocks, Liang Li

Theses and Dissertations

Hydrothermal carbonization (HTC) is a novel environmentally beneficial thermal conversion process for the transformation of organic feedstocks to value-added products. However, little is known about the role of feedstock properties and/or process conditions during carbonization. This study was conducted to determine the parameters most influential during the HTC of organic feedstocks. Experiments and statistical analyses were conducted to: (1) determine the effect of specific feedstocks, feedstock interactions, and process conditions on carbonization product characteristics; (2) understand how initial liquid characteristics influence product characteristics and evaluate the significance of these initial liquid characteristics in predicting product characteristics; and (3) develop statistical …

Extending Time Series Forecasting Methods Using Functional Principal Components Analysis, Isaac Michael Wagner-Muns

Masters Theses

"Traffic volume forecasts are used by many transportation analysis and management systems to better characterize and react to fluctuating traffic patterns. Most current forecasting methods do not take advantage of the underlying functional characteristics of the time series to make predictions. This paper presents a methodology that uses Functional Principal Components Analysis (FPCA) to create smooth and differentiable daily traffic forecasts. The methodology is validated with a data set of 1,813 days of 15 minute aggregated traffic volume time series. Both the FPCA based forecasts and the associated prediction intervals outperform traditional Seasonal Autoregressive Integrated Moving Average (SARIMA) based methods"--Abstract, …

Development Of Disaster Management In Turkey: From 1999 Kocaeli Earthquake To 2011 Van Earthquake, Mert Tolon, Kağan Cenk Mızrak

Civil Engineering Faculty Publications

The natural disasters that have occurred in Turkey are categorized as % 61 earthquakes, followed by landslides, floods, rock falls, fires and storms. Between the years of 1903 and 2000, there have been nearly 150 earthquakes in Turkey which led to damage and this is a challenge for Turkey. The management and plans of these natural disasters in Turkey were first developed in 1959. In 1999, with the magnitude of 7.4, The Kocaeli and Duzce earthquakes affected a region of Turkey that constitutes % 23 of the country’s population. After that, in 2000 necessary laws have been prepared and enacted. …

Curriculum Innovation: Incorporating The Kern Engineering Entrepreneurial Network (Keen) Framework Into Online Discussions, Lisa Bosman, Brooke K. Mayer, Patrick J. Mcnamara

Civil and Environmental Engineering Faculty Research and Publications

The purpose of this study was to respond to the following research question: How does the Kern Engineering Entrepreneurial Network (KEEN) framework build interest in technical topic areas, impact student learning outcomes, and develop the entrepreneurial mindset when applied to the engineering classroom? The KEEN framework was developed to combine the entrepreneurial mindset with engineering education to produce a more valuable, strategically prepared engineer, rather than simply an “obedient engineer”. The framework proposes that the entrepreneurial mindset of students is increased by promoting curiosity, encouraging connections, and creating value. The results from this work provide insight into the impact and …

Modeling The Effects Of Manufacturing Geometric Imperfections In The Buckling Analysis Of Three-Dimensional Structures, Juan Carlos Salcido

Open Access Theses & Dissertations

Reticulated three-dimensional structures follow design practices based on the common assumption that joints are either rigid, or pinned. However, the actual non-linear behavior of the jointing system interaction is required to be incorporated into the analysis of the structure to accurately predict its buckling stability. Besides, currently, there is a concern on how manufacturing imperfections of these jointing systems affect the global behavior of three-dimensional structures. This Dissertation incorporates and captures the effect that manufacturing geometric imperfections in the fir-tree jointing system produce in the non-linear buckling behavior of three-dimensional structures.

To understand the effect that initial manufacturing imperfections of …